All

Fits GPF models only. Sports Cat option includes 4.5" (114.3mm) 200 cell high flow sports catalyst. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. The sports cat option has been designed with a 4.5 in/114.3mm 200 cell high flow sports catalyst, maximising the flow rates and optimising the tuning potential of Audi Sport's iconic hot hatchback. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sport catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory. IMPORTANT: this exhaust removes the PPF (Petrol Particulate Filter) and will require engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only as this system removes the PPF filter. All relevant fittings and gaskets are supplied. (Except turbo clamp).   Press Release The Audi S3 has been a long time favourite amongst hot hatch fans. The new S3 (8Y) follows on from the success of its predecessor: the S3 (8V). Audi have gone to great lengths to make sure that the new version of their Quattro, all-wheel drive hot-hatch is improved over the outgoing model. As a result, the revised EA888 2.0 TSI now produces 306bhp, which when teamed up with Quattro all-wheel drive, fires the new S3 from a standstill to 62 MPH in just 4.8 seconds and on to a top speed of 155 MPH. The S3 has seemingly limitless tuning potential. Cobra Sport have enjoyed enormous success in this field, with their performance exhausts for both the 8P and 8V Audi S3's being amongst the best-selling systems in the market. Aiming to replicate this success, Cobra Sport are proud to announce their latest product range for the Audi S3 (8Y). Over the past few months, their R&D team have been hard at work developing a range of performance exhaust systems that will cater to the needs of any Audi enthusiast. The new Cobra Sport exhaust range is available in GPF Back configuration initially with de-cat/sports cat downpipe parts available later this year. Cobra Sport has opted for large 3" 76.2mm stainless steel pipework for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing expertly TIG welded Cobra Sport exhaust setup will open up the future tuning possibilities of the Audi S3. The GPF Back performance exhaust systems can be fitted without the need for any engine tuning as it keeps the stock catalyst and GPF in place (MOT compliant). The static sound testing revealed a +5dB increase in non-resonated GPF Back form on the 3,800rpm test. Media British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the GPF section backwards (GPF-back), this exhaust replaces the centre and rear sections. Valved GPF Back (Non-Resonated) Sound Test Results: (Dynamic Mode) Engine at Idle: 63.6dB (+5.9dB) - Static 3,500rpm test: 84dB (+5dB) All relevant fittings and gaskets are supplied. Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind.     Press Release The Audi S3 has been a long time favourite amongst hot hatch fans. The new S3 (8Y) follows on from the success of its predecessor: the S3 (8V). Audi have gone to great lengths to make sure that the new version of their Quattro, all-wheel drive hot-hatch is improved over the outgoing model. As a result, the revised EA888 2.0 TSI now produces 306bhp, which when teamed up with Quattro all-wheel drive, fires the new S3 from a standstill to 62 MPH in just 4.8 seconds and on to a top speed of 155 MPH. The S3 has seemingly limitless tuning potential. Cobra Sport have enjoyed enormous success in this field, with their performance exhausts for both the 8P and 8V Audi S3's being amongst the best-selling systems in the market. Aiming to replicate this success, Cobra Sport are proud to announce their latest product range for the Audi S3 (8Y). Over the past few months, their R&D team have been hard at work developing a range of performance exhaust systems that will cater to the needs of any Audi enthusiast. The new Cobra Sport exhaust range is available in GPF Back configuration initially with de-cat/sports cat downpipe parts available later this year. Cobra Sport has opted for large 3" 76.2mm stainless steel pipework for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing expertly TIG welded Cobra Sport exhaust setup will open up the future tuning possibilities of the Audi S3. The GPF Back performance exhaust systems can be fitted without the need for any engine tuning as it keeps the stock catalyst and GPF in place (MOT compliant). The static sound testing revealed a +5dB increase in non-resonated GPF Back form on the 3,800rpm test. Media

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the GPF section backwards (GPF-back), this exhaust replaces the centre and rear sections. All relevant fittings and gaskets are supplied. Race GPF Back (Non-Resonated) Sound Test Results: (Dynamic Mode) Engine at Idle: 66.8dB (+10.8dB) - Static 3,500rpm test: 89.6dB (+15dB) Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind. Press Release The Audi S3 has been a long time favourite amongst hot hatch fans. The new S3 (8Y) follows on from the success of its predecessor: the S3 (8V). Audi have gone to great lengths to make sure that the new version of their Quattro, all-wheel drive hot-hatch is improved over the outgoing model. As a result, the revised EA888 2.0 TSI now produces 306bhp, which when teamed up with Quattro all-wheel drive, fires the new S3 from a standstill to 62 MPH in just 4.8 seconds and on to a top speed of 155 MPH. The S3 has seemingly limitless tuning potential. Cobra Sport have enjoyed enormous success in this field, with their performance exhausts for both the 8P and 8V Audi S3's being amongst the best-selling systems in the market. Aiming to replicate this success, Cobra Sport are proud to announce their latest product range for the Audi S3 (8Y). Over the past few months, their R&D team have been hard at work developing a range of performance exhaust systems that will cater to the needs of any Audi enthusiast. The new Cobra Sport exhaust range is available in GPF Back configuration initially with de-cat/sports cat downpipe parts available later this year. Cobra Sport has opted for large 3" 76.2mm stainless steel pipework for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing expertly TIG welded Cobra Sport exhaust setup will open up the future tuning possibilities of the Audi S3. The GPF Back performance exhaust systems can be fitted without the need for any engine tuning as it keeps the stock catalyst and GPF in place (MOT compliant). Media

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust fits from the turbo backwards (turbo-back system), these parts replace the front pipe, centre and rear sections. The sports cat option has been designed with a 4.5 in/114.3mm 200 cell high flow sports catalyst, maximising the flow rates and optimising the tuning potential of Audi Sport's iconic hot hatchback. This resonated sports exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder option, as it excludes the centre silencer and therefore, has a sportier exhaust note. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sport catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory. All relevant fittings and gaskets are supplied. (Except turbo clamp). This performance exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. IMPORTANT: this exhaust removes the PPF (Petrol Particulate Filter) and will require engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only as this system removes the PPF filter.   Press Release   The Audi S3 has been a long time favourite amongst hot hatch fans. The new S3 (8Y) follows on from the success of its predecessor: the S3 (8V). Audi have gone to great lengths to make sure that the new version of their Quattro, all-wheel drive hot-hatch is improved over the outgoing model. As a result, the revised EA888 2.0 TSI now produces 306bhp, which when teamed up with Quattro all-wheel drive, fires the new S3 from a standstill to 62 MPH in just 4.8 seconds and on to a top speed of 155 MPH. The S3 has seemingly limitless tuning potential. Cobra Sport have enjoyed enormous success in this field, with their performance exhausts for both the 8P and 8V Audi S3's being amongst the best-selling systems in the market. Aiming to replicate this success, Cobra Sport are proud to announce their latest product range for the Audi S3 (8Y). Over the past few months, their R&D team have been hard at work developing a range of performance exhaust systems that will cater to the needs of any Audi enthusiast. The new Cobra Sport exhaust range is available in GPF Back configuration initially with de-cat/sports cat downpipe parts available later this year. Cobra Sport has opted for large 3" 76.2mm stainless steel pipework for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing expertly TIG welded Cobra Sport exhaust setup will open up the future tuning possibilities of the Audi S3. The GPF Back performance exhaust systems can be fitted without the need for any engine tuning as it keeps the stock catalyst and GPF in place (MOT compliant). The static sound testing revealed a +5dB increase in non-resonated GPF Back form on the 3,800rpm test. Media British Touring Car Championship and UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 Saloon/Sedan performance exhaust is made in 3"/76.2mm pipework and fits from the GPF section backwards (GPF-back), this exhaust replaces the centre and rear sections. All relevant fittings and gaskets are supplied. Race GPF Back (Non-Resonated) Sound Test Results: (Dynamic Mode) Engine at Idle: 66.8dB (+10.8dB) - Static 3,500rpm test: 89.6dB (+15dB) Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will continue to swop from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind. Press Release The Audi S3 has been a long time favourite amongst compact sports saloon fans. The new S3 (8Y) Sedan follows on from the success of its predecessor: the S3 (8V). Audi have gone to great lengths to make sure that the new version of their Quattro, all-wheel drive hot-hatch is improved over the outgoing model. As a result, the revised EA888 2.0 TSI now produces 306bhp, which when teamed up with Quattro all-wheel drive, fires the new S3 from a standstill to 62 MPH in just 4.8 seconds and on to a top speed of 155 MPH. The S3 has seemingly limitless tuning potential. Cobra Sport have enjoyed enormous success in this field, with their performance exhausts for both the 8P and 8V Audi S3's being amongst the best-selling systems in the market. Aiming to replicate this success, Cobra Sport are proud to announce their latest product range for the Audi S3 (8Y). Over the past few months, their R&D team have been hard at work developing a range of performance exhaust systems that will cater to the needs of any Audi enthusiast. The new Cobra Sport exhaust range is available in GPF Back configuration initially with de-cat/sports cat downpipe parts available later this year. Cobra Sport has opted for large 3" 76.2mm stainless steel pipework for the biggest upgrade in terms of performance, flow rate and sound levels. The free flowing expertly TIG welded Cobra Sport exhaust setup will open up the future tuning possibilities of the Audi S3. The GPF Back performance exhaust systems can be fitted without the need for any engine tuning as it keeps the stock catalyst and GPF in place (MOT compliant). Media

Read more less

Fits: F32 (Coupe), F33 (Convertible) & F36 (Gran Coupe) M-Sport models (additional quad exit panel required). Save 30% on the matching rear diffuser panel when purchased together (see part code: RP03). Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 435D performance exhaust is made in 3"/76.2mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. This performance exhaust is designed to fit 435D vehicles with the M-Sport bodykit with the addition of the interchangeable quad exit M4 Style lower rear panel. Please see related products for the matching rear diffuser panel - save 30% on the panel (part code: RP03) when purchased with this exhaust (retail customers only). This cosmetic performance exhaust upgrade is focused on improving the styling of the 435D. The exhaust has been designed to offer a subtle improvement in sound but stay at very similar sound levels to the original exhaust. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Does not fit AdBlue models. Press Release Cobra Sport have added a quad exit performance exhaust to their ever popular range of style upgrades for the BMW 435D, with the launch of a BMW M4 style quad exit exhaust system. For those seeking to achieve a more aggressive and sporty look similar to that of the M4 to the rear of their 435D, Cobra Sport now offer a quad tip fully TIG welded stainless steel cosmetic exhaust upgrade which makes a bold statement. This exhaust system has been designed to fit F32 Coupe, F33 Convertible and F36 Gran Coupe 435D models with the M-Sport bodykit with the addition of a quad exit M4 style lower rear panel (available separately). Once fitted, the new Cobra Sport 435D exhaust system and replacement body panel look entirely at home on the car giving a look which should have been created directly from the factory. The new Cobra Sport exhaust is ideal for those looking for a sportier more aggressive look to the high powered diesel models. Matt Thomas, Cobra Sport's Sales Manager says "We've seen a growing trend of people wanting to achieve the look of the more recognisable M4 quad exit exhaust on the more economical diesel 435D. Our quad exit exhaust conversion allows them to achieve the look with this fantastic cosmetic upgrade. The 435D cosmetic exhaust upgrade has been specially designed to offer a marginally deeper exhaust tone overall but stay within 2dB of the original exhaust." The new quad exit Cobra Sport exhaust for the 435D is finished with a pair of specially designed twin 3" (76.2mm) highly polished T304 stainless steel slash cut tailpipes which further enhance the appearance the car and take inspiration from the styling of the popular BMW M4. Media

Read more less

Requires mandatory ECU reflash when fitted to PPF models. Fitment is for motorsport and off road use only.  Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3in/76.2mm pipework and fits from the front catalyst section backwards (Cat-back) replacing the PPF, centre and rear sections. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. IMPORTANT: this exhaust removes the PPF filter and will require engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only as this system removes the PPF filter.  Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Sport mode) your exhaust tone will continue to swop from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Sport mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind. Fitted images show the non-valved resonated version. All relevant fittings and gaskets are supplied. Press Release The third generation of BMW’s 1 Series was launched in 2019, with the chassis name F40. For the performance range topping F40, BMW revived the ‘M135i’ moniker, which had not made an appearance on the back of a Baby BMW since its predecessor, the F20 M135i. Sporting BMW’s B48 2 litre, 4-cylinder engine with Twin Power Turbo technology, the B48 produces 306hp and a thumping 332lb ft of torque. These punchy figures fire the M135i from 0-62MPH in just 4.8 seconds and on to an electronically limited top speed of 155 MPH. The M135i is shipped from the factory with a muted exhaust sound leading to a very disappointing driving experience. Along with increased performance, Cobra Sport were keen to put the emotion back into the drive with an improved aural and emotional experience. Cobra Sport opted for 3”/76.2mm stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free-flowing Cobra Sport exhaust setup completely transforms the vehicle and will open up the future tuning possibilities of the BMW M135i (F40). During the design stages, Cobra Sport made sure that all of the configurations are interchangeable so that customers can add to their system over the coming years. We imagine most will start with the PPF back configuration which can be fitted without the need for any engine tuning as it keeps the stock catalyst and PPF in place (MOT compliant). Adding a PPF delete section would create the cat back setup and customers going down the tuning route can add a high flow sports catalyst or de-cat front pipe to create a full turbo back setup. For those who want further improve sound levels, Cobra Sport offers their unique rear silencer delete range. This exhaust setup removes the rear silencer to offer the biggest sound increase whilst keeping a sporty exhaust tone (+13.1dB in PPF back rear silencer delete configuration). The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 49% over the OEM system with the PPF back rear silencer delete system weighing in at only 9.02kg compared to the original 17.8kg. Cobra Sport have improved the styling of the BMW M135i, creating a noticeably enhanced and balanced look to the rear of the M135i with a choice of dual 4” (101.6mm) and 4.5” (114.3mm) slash cut highly polished stainless-steel tailpipes. For those looking to take the style upgrade a stage further, upgraded carbon fibre tailpipes are available. Like all Cobra Sport exhausts, the M135i F40 exhausts are TIG-welded from high-quality T304 stainless steel and the mandrel pipework is a full 3” (76.2mm) in diameter for maximum sound and tuning potential. Media Example of the Cobra Sport BMW M135i Exhaust (GPF Back with Box Delete)

Read more less

Note: This front downpipe only fits to an existing Cobra Sport GPF or Cat Back Performance Exhaust. For fitments to standard exhaust please see alternative listings. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fits from the downpipe to the centre section. This exhaust makes the system louder as it removes the GPF filter and therefore, offers a significantly sportier exhaust note. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory. Fitment will require basic engine tuning at time of fitment to cancel the EML light. When fitted to a Cobra Performance Exhaust, the SLJ supplied is not required for fitment. Fitment is for motorsport and off road use only. Press Release The third generation of BMW’s 1 Series was launched in 2019, with the chassis name F40. For the performance range topping F40, BMW revived the ‘M135i’ moniker, which had not made an appearance on the back of a Baby BMW since its predecessor, the F20 M135i. Sporting BMW’s B48 2 litre, 4-cylinder engine with Twin Power Turbo technology, the B48 produces 306hp and a thumping 332lb ft of torque. These punchy figures fire the M135i from 0-62MPH in just 4.8 seconds and on to an electronically limited top speed of 155 MPH. The M135i is shipped from the factory with a muted exhaust sound leading to a very disappointing driving experience. Along with increased performance, Cobra Sport were keen to put the emotion back into the drive with an improved aural and emotional experience. Cobra Sport opted for 3”/76.2mm stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free-flowing Cobra Sport exhaust setup completely transforms the vehicle and will open up the future tuning possibilities of the BMW M135i (F40). During the design stages, Cobra Sport made sure that all of the configurations are interchangeable so that customers can add to their system over the coming years. We imagine most will start with the PPF back configuration which can be fitted without the need for any engine tuning as it keeps the stock catalyst and PPF in place (MOT compliant). Adding a PPF delete section would create the cat back setup and customers going down the tuning route can add a high flow sports catalyst or de-cat front pipe to create a full turbo back setup. For those who want further improve sound levels, Cobra Sport offers their unique rear silencer delete range. This exhaust setup removes the rear silencer to offer the biggest sound increase whilst keeping a sporty exhaust tone (+13.1dB in PPF back rear silencer delete configuration). The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 49% over the OEM system with the PPF back rear silencer delete system weighing in at only 9.02kg compared to the original 17.8kg. Cobra Sport have improved the styling of the BMW M135i, creating a noticeably enhanced and balanced look to the rear of the M135i with a choice of dual 4” (101.6mm) and 4.5” (114.3mm) slash cut highly polished stainless-steel tailpipes. For those looking to take the style upgrade a stage further, upgraded carbon fibre tailpipes are available. Like all Cobra Sport exhausts, the M135i F40 exhausts are TIG-welded from high-quality T304 stainless steel and the mandrel pipework is a full 3” (76.2mm) in diameter for maximum sound and tuning potential. Media

Read more less

Note: This front downpipe fits to the standard exhaust only, please see other listings for Cobra Sport Exhaust fitments. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fits from the turbo to the PPF section. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces factory emissions devices and is not EC homologated. This may not meet current emission laws for road use in your territory. All relevant fittings and gaskets are supplied for fitment. Fitment will require basic engine tuning at time of fitment to cancel the EML light. Press Release The third generation of BMW’s 1 Series was launched in 2019, with the chassis name F40. For the performance range topping F40, BMW revived the ‘M135i’ moniker, which had not made an appearance on the back of a Baby BMW since its predecessor, the F20 M135i. Sporting BMW’s B48 2 litre, 4-cylinder engine with Twin Power Turbo technology, the B48 produces 306hp and a thumping 332lb ft of torque. These punchy figures fire the M135i from 0-62MPH in just 4.8 seconds and on to an electronically limited top speed of 155 MPH. The M135i is shipped from the factory with a muted exhaust sound leading to a very disappointing driving experience. Along with increased performance, Cobra Sport were keen to put the emotion back into the drive with an improved aural and emotional experience. Cobra Sport opted for 3”/76.2mm stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free-flowing Cobra Sport exhaust setup completely transforms the vehicle and will open up the future tuning possibilities of the BMW M135i (F40). During the design stages, Cobra Sport made sure that all of the configurations are interchangeable so that customers can add to their system over the coming years. We imagine most will start with the PPF back configuration which can be fitted without the need for any engine tuning as it keeps the stock catalyst and PPF in place (MOT compliant). Adding a PPF delete section would create the cat back setup and customers going down the tuning route can add a high flow sports catalyst or de-cat front pipe to create a full turbo back setup. For those who want further improve sound levels, Cobra Sport offers their unique rear silencer delete range. This exhaust setup removes the rear silencer to offer the biggest sound increase whilst keeping a sporty exhaust tone (+13.1dB in PPF back rear silencer delete configuration). The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 49% over the OEM system with the PPF back rear silencer delete system weighing in at only 9.02kg compared to the original 17.8kg. Cobra Sport have improved the styling of the BMW M135i, creating a noticeably enhanced and balanced look to the rear of the M135i with a choice of dual 4” (101.6mm) and 4.5” (114.3mm) slash cut highly polished stainless-steel tailpipes. For those looking to take the style upgrade a stage further, upgraded carbon fibre tailpipes are available. Like all Cobra Sport exhausts, the M135i F40 exhausts are TIG-welded from high-quality T304 stainless steel and the mandrel pipework is a full 3” (76.2mm) in diameter for maximum sound and tuning potential. Media  

Read more less

Note: This front downpipe fits only to a standard factory fit PPF Back, this system replaces the downpipe and PPF section but keeps the standard centre and rear sections. Please see alternative listings for Cobra Sport fitments.  Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fits from the downpipe to the centre section, replacing the GPF exhaust section. This exhaust makes the system louder as it removes the PPF filter and therefore, offers a significantly sportier exhaust note. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  Fitment will require basic engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only. Press Release The third generation of BMW’s 1 Series was launched in 2019, with the chassis name F40. For the performance range topping F40, BMW revived the ‘M135i’ moniker, which had not made an appearance on the back of a Baby BMW since its predecessor, the F20 M135i. Sporting BMW’s B48 2 litre, 4-cylinder engine with Twin Power Turbo technology, the B48 produces 306hp and a thumping 332lb ft of torque. These punchy figures fire the M135i from 0-62MPH in just 4.8 seconds and on to an electronically limited top speed of 155 MPH. The M135i is shipped from the factory with a muted exhaust sound leading to a very disappointing driving experience. Along with increased performance, Cobra Sport were keen to put the emotion back into the drive with an improved aural and emotional experience. Cobra Sport opted for 3”/76.2mm stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free-flowing Cobra Sport exhaust setup completely transforms the vehicle and will open up the future tuning possibilities of the BMW M135i (F40). During the design stages, Cobra Sport made sure that all of the configurations are interchangeable so that customers can add to their system over the coming years. We imagine most will start with the PPF back configuration which can be fitted without the need for any engine tuning as it keeps the stock catalyst and PPF in place (MOT compliant). Adding a PPF delete section would create the cat back setup and customers going down the tuning route can add a high flow sports catalyst or de-cat front pipe to create a full turbo back setup. For those who want further improve sound levels, Cobra Sport offers their unique rear silencer delete range. This exhaust setup removes the rear silencer to offer the biggest sound increase whilst keeping a sporty exhaust tone (+13.1dB in PPF back rear silencer delete configuration). The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 49% over the OEM system with the PPF back rear silencer delete system weighing in at only 9.02kg compared to the original 17.8kg. Cobra Sport have improved the styling of the BMW M135i, creating a noticeably enhanced and balanced look to the rear of the M135i with a choice of dual 4” (101.6mm) and 4.5” (114.3mm) slash cut highly polished stainless-steel tailpipes. For those looking to take the style upgrade a stage further, upgraded carbon fibre tailpipes are available. Like all Cobra Sport exhausts, the M135i F40 exhausts are TIG-welded from high-quality T304 stainless steel and the mandrel pipework is a full 3” (76.2mm) in diameter for maximum sound and tuning potential. Media

Read more less

Fitment will require basic engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M135i performance exhaust is made in 3"/76.2mm pipework and fits from the downpipe to the centre section, replacing the GPF exhaust section. This exhaust makes the system louder as it removes the GPF filter and therefore, offers a significantly sportier exhaust note. The resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. Fitment will require basic engine tuning at time of fitment to cancel the EML light. Fitment is for motorsport and off road use only as it removes the PPF filter.  IMPORTANT: This exhaust removes the PPF (Petrol Particulate Filter) and will require engine tuning at time of fitment to cancel the EML light on PPF equipped vehicles. Media Example of the Cobra Sport BMW M135i Exhaust (GPF Back with Box Delete)

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These BMW M135i (F40) performance exhausts are made in 3" (76.2mm) pipework and fit from the Gasoline Particulate Filter section backwards (GPF-back) this exhaust replaces the centre and rear sections. All relevant fittings and gaskets are supplied. This exhaust offers improvement in terms of exhaust tone, bass and sound level whilst keeping the stock catalyst and GPF in place. This exhaust system has been designed to be easily upgradable to a full turbo-back exhaust in the future by purchasing additional sections. This exhaust has a choice of 4" (101.6mm) and 4.5" (114.5mm) tailpipe options including a choice of carbon fibre tip options. GPF Back with Rear Box Test Results: Sound - Engine at Idle: 72.3dB (+9.3dB) - Static 3,800rpm test: 87.2dB (+5.2dB) Weight - 10.4kg (-7.4kg) Please Note: The 'Valved' exhaust retains the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will continue to swap from quieter to louder tones as before. The 'Non-Valved' exhaust removes the use of exhaust valves. When switching drive modes (e.g. Eco to Race mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however, the Cobra Sport exhaust has been designed with this in mind. Press Release The third generation of BMW’s 1 Series was launched in 2019, with the chassis name F40. For the performance range topping F40, BMW revived the ‘M135i’ moniker, which had not made an appearance on the back of a Baby BMW since its predecessor, the F20 M135i. Sporting BMW’s B48 2 litre, 4-cylinder engine with Twin Power Turbo technology, the B48 produces 306hp and a thumping 332lb ft of torque. These punchy figures fire the M135i from 0-62MPH in just 4.8 seconds and on to an electronically limited top speed of 155 MPH. The M135i is shipped from the factory with a muted exhaust sound leading to a very disappointing driving experience. Along with increased performance, Cobra Sport were keen to put the emotion back into the drive with an improved aural and emotional experience. Cobra Sport opted for 3”/76.2mm stainless steel pipework which is larger than most on the market for the biggest upgrade in terms of performance, flow rate and sound levels. The free-flowing Cobra Sport exhaust setup completely transforms the vehicle and will open up the future tuning possibilities of the BMW M135i (F40). During the design stages, Cobra Sport made sure that all of the configurations are interchangeable so that customers can add to their system over the coming years. We imagine most will start with the PPF back configuration which can be fitted without the need for any engine tuning as it keeps the stock catalyst and PPF in place (MOT compliant). Adding a PPF delete section would create the cat back setup and customers going down the tuning route can add a high flow sports catalyst or de-cat front pipe to create a full turbo back setup. For those who want further improve sound levels, Cobra Sport offers their unique rear silencer delete range. This exhaust setup removes the rear silencer to offer the biggest sound increase whilst keeping a sporty exhaust tone (+13.1dB in PPF back rear silencer delete configuration). The Cobra Sport team were able to reduce the weight of the exhaust system by an impressive 49% over the OEM system with the PPF back rear silencer delete system weighing in at only 9.02kg compared to the original 17.8kg. Cobra Sport have improved the styling of the BMW M135i, creating a noticeably enhanced and balanced look to the rear of the M135i with a choice of dual 4” (101.6mm) and 4.5” (114.3mm) slash cut highly polished stainless-steel tailpipes. For those looking to take the style upgrade a stage further, upgraded carbon fibre tailpipes are available. Like all Cobra Sport exhausts, the M135i F40 exhausts are TIG-welded from high-quality T304 stainless steel and the mandrel pipework is a full 3” (76.2mm) in diameter for maximum sound and tuning potential. Media Example of the Cobra Sport BMW M135i Exhaust (GPF Back with Rear Box) Exhaust Talk 03 - GPF Debate - What is a GPF / PPF Exhaust Particulate Filter - Improve Exhaust Sound VLOG - Example of the Cobra Sport BMW M135i Exhaust (GPF Back with Box Delete) VLOG - Example of the Cobra Sport BMW M135i Exhaust (GPF Back with Box Delete)

Read more less