Performance - Audi S4 B9 (2015-Present)

Introducing the Enhanced Edition LED H7 Mini All the Power & Brightness of our V3 Bulb, but without the bulk! This bulb will fit in ANY H7 Fitments and replaces the OEM lamp unit for an ultra bright replacement. This bulb can be used as a dipped & high beam upgrade as well as a foglight. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior output without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. We've managed to micro size the cooling fan and move it into the shaft of the bulb, which means the removal of the bulky heat fade on the rear of the bulb and allowing for fitment in tight areas just like oem! No longer any need for clips & caps! The bulb is designed to fit in any H7 fixing without any adjustments or additional items, and utilising its 4 point technology, this can be orientated in either 2 or 4 location points to ensure the best output and zero polarity issues! Specs: Voltage - 12v Wattage - 28w LED Chip - 3570 Colour Temp - 6000k Ice White Lumen - 6000Lm Per Bulb Will fit in any vehicle which takes a H7 fitting  Good to know. High Lumen Output (6000lm Per Bulb) Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps What's in the box 2x H7 LED Units (6000k Default) Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

Description Here we introduce to you our #Enhanced Edition Hir2 (9012) LED Dip Beam Upgrade. Vision, Without Restriction The output on these bulbs is truly phenomenal, whilst the latest technology and components allows for superior beam without damaging OEM Components. Designed to fit as any OEM part would, but offering a a higher lumen output. This is truly a DIY item, and CEUK (unlike most companies with a similar product) offers our customers the flexibility with this item. The LED's come as standard 6000K ice white, However as part of the #Enhanced Kit you are supplied with DIY Film Tint which is easily applied to the glass surround on the LED to allow you to change your bulbs into either 3000k (Yellow) or 8000k (white/Blue), Truly giving you control of your output. Its worth noting that due to the design of the bulb, The driver / Heat fade is built into the back of the bulb and may not fit into all headlamp types. If you have any concerns please contact us via our Facebook Page.  Good to know.   High Lumen Output Improved visibility in the evenings Reduced strain on the eyes suitable for use in all builds of headlamps Suitable for projector and reflector headlamps   Technical Info   Voltage: 12v Wattage: 50W Lumens: 12,000 (6000 Per Bulb)   What's in the box 2x Hir2 (9012) LED Units (6000k Default) 2x 3000k Interchangeable Film 2x 8000k Interchangeable Film   Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

HB4 / 9006 ice white upgrade 6000k ice white Halogen Upgrade  plug and play, Direct replacement for any OEM 9006/HB4 bulb Pure white light output and increased vision  Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. Can be used in Dipped Beam, Main beam and Fog Light applications  

Read more less

Introducing our OFFICIAL CEUK winter warmer bobble hat   Full black woollen hat with a dark grey bobble for contrast, featuring the official CEUK logo embroidered on the front.   Ultra warm and very classy this is not only a winter tool, but a fashion statement   Also added option for official hanging air freshener

Read more less

Pop them caps in style with a CEUK bottle opener - available in multiple colours 

Read more less

Side Skirts Diffusers Audi S4 / A4 S-Line / A4 Competiton B9 FITS ONLY:Audi S4 B9 Sedan / Avant (2015-) Audi A4 S-Line B9 Sedan / Avant (2016-)Audi A4 Competiton B9 Sedan / Avant (2019-) COMPLETE SET CONTAINS:-> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Fits pre-facelift models without integrated tips in the rear valance FITS SEDAN ONLY Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your pre-facelift B9 S4. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Front Splitter V.4 Audi S4 / A4 S-line B9 FITS ONLY:AUDI S4 B9 (2015-2019)AUDI A4 S-LINE B9 (2015-2019) COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual   Fitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdf   Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

Description  Now we give you the Chaser Edition Bluetooth footwell strip kit  This kit is for any car, simply tell us in the description what fuse type you have in your glove box fuse holder and we will send it out! with over 600 static colours, and 200 “Fluid” colour changing and dancing modes this really is a game changer  Controlled fully by your mobile phone using Bluetooth and our fantastic control app all the functions are controlled by you! Powered by your ignition the strip will come on as soon as you start your car and remain on until the ignition is switched off, The kit utilises your passenger footwell fuse box for power What’s in the Box? Footwell Strip Wiring Loom Bluetooth Control Module Instructions Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Glove Box strip not included - This is for other Models - Images are catalogue images Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. The installation of LED's may trigger a Dashboard Error Message which is a harmless side effect of lower powered units, if this occurs for you please refer to our FAQ's. 

Read more less

BONNET VENTS UNIVERSAL Fits: UNIVERSAL PART BUT WE HAVE KNOWN TO FIT ON... Ford Focus 3 RS 2015 - up FORD Fiesta mk7 ST FACELIFT version 2013 -2016 Renault Megane 3 RS version 2010 - 2015 HONDA CIVIC IX TYPE R (FK2) 2015 - up OPEL CORSA D 2006 - and lots more   COMPLETE SET CONTAINS:-> Bonnet Vents GLOSS BLACKOnly one side of the bonnet extension is coated and the rear side is plain black.(Rear site and edge of item is not coated by structure) Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our fitting manuals.We can only accept a return within 14 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Part of our IllumiNite range - an ultra bright white halogen replacement for your fog and cornering bulbs. 35W - 6500K Ice White Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering.

Read more less

Get this bottle of Ceramic QDS Absolutely FREE when you follow the steps below! YOU NEED TO ADD THIS TO YOUR CART! Simply complete the task below, add this item to your basket (Maximum of 1) and if you meet the criteria set out below, the bottle price will be removed from your basket! Task: Purchase any items that total OVER £50 (Excluding VAT) from one of the below collections  (Basically anything CEUK Branded, Enhanced Performance Branded or in our clearance) Car Enhancements UK Enhanced Performance Clearance Only so many available! 1 FREE BOTTLE PER ORDER ONLY! Alternatively if you wish to just buy one for £20 - thats also fine!

Read more less