All

As the preferred and official supplier of intercoolers to Mini Challenge, we are proud to present our intercooler for the Mini JCW F56 Chassis (2014-on). As the originators of the stepped core design way back in 2006, we were best placed within the market to call on our vast expertise in order to deliver a direct fit intercooler that would enhance the performance potential of the BMW Group 2.0 petrol turbo engine. Our core offers a 31% increase in frontal area over stock (BMW Part no.17517617600) and a correspondingly large increase in volume of 41%. Our end tanks are cast aluminium, made from 3D printed prototypes that we manufactured ourselves in our dedicated R&D facility in Gloucester, UK. The bar and plate design we have used comes after months of testing different core designs and opting for the core with best internal and external airflow. Official supplier to Mini Challenge The Forge F56 JCW intercooler gives a respectable 31% increase in frontal area over stock and a correspondingly large increase in volume of 41% The Forge F56 JCW Intercooler leaves the opposition behind yet again being the first to market The Forge development team have used Solidworks software to improve the OEM end tank design, making the Forge cast version a much freer flowing and efficient unit Testing and flow analysis has made this product a clear market leader Pressure drop under 1 Psi. This product is designed, developed and manufactured entirely in Great Britain and is covered by our lifetime warranty. Click here to find out about information and care for your Forge Motorsport cooling product. *Please note - this product does not fit the 2017 JCW cabriolet*   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

The ECS Tuning Front Mount Intercooler (FMIC) Kit boosts power and lowers intercooler outlet temps by maximizing core volume and more efficiently dispelling heat over the OEM sandwich-mounted intercooler. The factory intercooler is positioned between two hot heat exchangers, the A/C Condenser and Radiator, and suffers from an undersized and underperforming tube and fin core from the factory. Upgrading the OE-location intercooler is difficult for most hobbyists and is hidden within the core support. An alternative choice is our In-House Designed and Engineered FMIC Kit which relocates the charge cooler front and center, right behind your front bumper cover for maximum available airflow while moving it away from the hot heat exchangers inside the engine bay, all while adding an aggressive appearance to your turbocharged VW!  Our design features high quality cast aluminum end tanks with an integral flow divider on the inlet for even flow distribution, a massive 26” x 7 ⅞” x 3.0” (614.25 in.³ volume) aluminum bar and plate core, which lends to an increase in volume of +19.78% over the OEM GTI intercooler, for maximum heat dissipation, bolt-on powder-coated steel brackets, which require absolutely NO drilling or cutting, and 5-ply pre-molded silicone couplers with T-Bolt hose clamps. Our intercooler was in-house engineered to provide a bolt-on cooling solution for the VW MK7 GTI and Golf R market. Through our in-house evaluation on our ECS Shop MK7 GTI, we measured an increase of +24 WHP @ 6,400 RPM and +18 WTQ @ 6,375 RPM along with an increase of 19% in cooling efficiency and 80° F. lower intercooler outlet temperatures after 3 consecutive dyno pulls.    PART DESIGN INTERCOOLER 3D CAD designed to allow the largest intercooler possible without permanent modifications (no cutting or drilling)  Aluminum Straight Vane Bar and Plate Core - 26” x 7 ⅞” x 3.0” (614.25 in.³ internal core volume)  Raw Cast Aluminum End Tanks with smooth flowing internal inlet and outlet flow-paths  Cast 2.50" barbed connections keep hoses secured and minimizes the risk of hoses blowing off Internal flow divider on intercooler inlet for even flow distribution between the intercooler core  End tanks are tig welded to the intercooler core and the complete assembly is pressure tested to 3.5 BAR at 0% leak down to ensure sealing capacity Cast mounting features supply our bracketry with a rigid mounting point  MOUNTING BRACKET KIT Our unique design to mount the intercooler makes this kit truly remarkable! By bolting our brackets to the lower crash beam bolts, absolutely no drilling into your core support or drilling into your beam are required! Simply remove your lower crash beam bolts to install our brackets. The beam does NOT need to be removed.  Made from rigid ⅛” thick steel then powder-coated wrinkle-black for corrosion protection  Pre-installed zinc-plated rivet nuts make for a simple bolt-on solution to our intercooler with our included stainless steel bolts and washers  Included in the kit are our horn brackets which position the horns closer to the beam to make way for silicone charge pipe routing.  A pre-welded tab on the driver's side bracket maintains a mounting point for the ambient air temperature sensor bracket.  SILICONE COUPLERS Pre-molded and held to tight tolerances to achieve the best flow possible while navigating the tight areas within the MK7's front end  Made from heavy-duty, 5-ply fiberglass reinforced silicone for burst resistance. Capable of handling 250° F. operating temperatures and over 45 PSI.   Smooth internal passageways and smooth bends keep airflow at peak for the greatest level of performance    KIT CONTENTS ECS Front Mount Intercooler ECS Direct-Fit Mounting Bracket Kit with Mounting Hardware ECS Silicone Couplers with T-Bolt Hose Clamps    PERFORMANCE FEATURES Dyno tested on our In-House Mustang Dyno on our shop 2015 MK7 GTI 2.0T 6 speed manual, comparing OEM GTI intercooler to ECS FMIC. Please see our documented results under the INSTALLATION Tab for more information.  Vehicle Modifications: APR Stage 2 Hi-Torque 93 Octane Tune, Milltek 3.0" Catted Turbo-Back Exhaust, ECS Kohlefaser Luft-Technik Intake, ECS Charge Pipes  +24 WHP @ 6,400 RPM and +18 WTQ @ 6,375 RPM 15° Fahrenheit lower intercooler outlet temperature drop over 3 consecutive dyno pulls 80° Fahrenheit lower intercooler temperature rise over 3 consecutive dyno pulls  +19% more efficient at 6,250 RPM (+4% at lower engine speeds, ~3,250 RPM) 0.5 PSI lower pressure drop at 6,250 RPM   PRODUCT DEVELOPMENT Our ECS Front Mount Intercooler Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your front bumper cover in detail! See our Installation PDF under the INSTALLATION Tab for more information. No cutting, drilling or any other permanent modifications are required for intended fitment.  Vehicles with SAI (Secondary Air Injection) will need to bend the wiring harness bracket 45° to clear silicone coupler. This can easily be bent to original form if ever desired.  Be advised this will NOT FIT pre-facelift MK7s with forward collision warning radar (large black sensor in lower, center bumper grille).  Cross Reference FMIC, charge cooler This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

MMR Performance Competition Intercooler For The BMW M135i / M235i Add a touch of MMR Performance quality to your BMW M135i with the MMR Performance Competition Intercooler! The MMR Performance Competition Intercooler for the F20/F30 M135i and M235i provides a significant improvement to the power and torque figures, particularly on high powered BMW M135i models running our very own VUDU Remap Software. Maintaining charge air temperatures at a much reduced rate, compared to that of the standard intercooler system, the MMR Performance Intercooler uses a huge bar and plate stepped core to equip your BMW M135i with an intercooler twice the core volume of the original unit. The BMW M135i intercooler core uses internal turbulators to improve cooling performance even further with the CFD optimised end tanks assisting with the maintenance for the greatest possible airflow. The sheer size of the bar and plate core scales in at 8.6kg but ultimately still becomes one of the finest intercooler systems available for the BMW M135i model. Key Features: 520mm x 215mm x 145mm bar and plate intercooler core. 70% larger frontal area compared to the original intercooler system. 90% increase in internal volume compared to the original intercooler system. Provides a substantial temperature drop. Anti-corrosive thermal coating material. Easy installation - No cutting or further modifications required. Applications: F20 Engines F30 Engines  

Read more less

MMR Performance Intercooler For The BMW M135i / M235i Add a touch of MMR Performance quality to your BMW M135i with the MMR Performance Intercooler! The MMR Performance Intercooler for the F20/F30 M135i and M235i provides a significant improvement to the power and torque figures, particularly on high powered BMW M135i models running our very own VUDU Remap Software. Maintaining charge air temperatures at a much reduced rate, compared to that of the standard intercooler system, the MMR Performance Intercooler uses a huge bar and plate stepped core to equip your BMW M135i with an intercooler twice the core volume of the original unit. The BMW M135i intercooler core uses internal turbulators to improve cooling performance even further with the CFD optimised end tanks assisting with the maintenance for the greatest possible airflow. The sheer size of the bar and plate core scales in at 11kg but ultimately still becomes one of the finest intercooler systems available for the BMW M135i model. Key Features: 520mm x 215mm x 145mm bar and plate intercooler core. 70% larger frontal area compared to the original intercooler system. 90% increase in internal volume compared to the original intercooler system. Provides a substantial temperature drop. Anti-corrosive thermal coating material. Easy installation - No cutting or further modifications required. Applications: F20 Engines F30 Engines Require a Fitting? Please contact a member of the team at AET Motorsport for any additional information you require regarding the MMR Performance Intercooler for the BMW M135i. Our team of expert technicians, located at our state of the art workshop facility in West Yorkshire, have plenty of experience working on our development M135i model so will have no problem with the fitting. Call or Email to discuss: Tel: 01924 228042  |  Email: info@aetmotorsport.com

Read more less

REVO INTERCOOLER PIPE UPGRADE MQB 2.0TSI EA888 GEN3 The Revo Intercooler Pipe Upgrade kit offers incredible power and torque increases by reducing charge system resistance and improving flow compared to the restrictive stock pipework. Designed for the MQB 1.8/2.0 TSI EA888 Gen3 Engine, this upgrade is available for multiple models including VW Golf, Audi TT, A3, S3, SEAT Leon, Skoda Superb and Octavia. Featuring larger internal diameters, fewer restrictions for smoother airflow, and optimised routing, the turbo meets less resistance and can perform more effectively. A multitude of design features and attention to detail that Only Revo offer means this a product that not only looks great but more importantly performs. Reinforced, oil-resistant silicone hoses, lightweight mandrel-bent aluminium pipework and flush fit joints to eliminate turbulence, the Revo Intercooler Pipe upgrade is designed to fit either the stock or Revo Intercooler. KEY FEATURES Increased internal diameter Smoother airflow Fits Revo and stock intercooler +27HP & 50NM Water Meth Bung INCREASED VOLUME Each part of the kit has been designed to increase the overall diameter and increase internal volume. Larger charge air volume in the system means reduced flow resistance, allowing the turbo to expend more energy on air compression and less energy overcoming restrictions; resulting in more power. CHARGE PIPE DESIGN The Revo charge pipe is a smooth mandrel-bent aluminium pipe, coupled with a custom tapered silicone hose to gradually transition to a larger diameter from the turbo outlet to the hard pipe. The charge pipe is designed to directly replace the OEM part utilising optimised pipe routing and a unique constant-diameter design. This eliminates restrictions, including dents found on the stock charge pipe while allowing enough clearance from engine parts, increasing performance without compromising fitment.   THROTTLE PIPE DESIGN The Revo throttle pipe increases airflow by replacing the stock part with an increased diameter, mandrel-bent aluminium hard pipe and reinforced oil resistant silicone hose. The hose connection is ID-matched to promote laminar, uniform flow across the transition of parts, as well as being slightly longer for ease of installation.   ROBUST DESIGN Only Revo scrutinises every detail of the existing system to ensure a quality replacement product for your vehicle. Alongside impressive performance benefits, this kit has several OE mounting points for stock wiring and hoses, a water-methanol installation bung and is finished in black with a laser-etched Revo logo.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house Hub dyno and Revo data acquisition software. The benefits of the Revo intercooler pipe upgrade allows the turbo to run more efficiently, moving a larger volume of air and minimising turbulence. This increases power and torque, especially in the middle of the rev range as highlighted during controlled Dyno testing. PERFORMANCE DATA Fitted to a Skoda Octavia vRS (2.0 TSI EA888 Gen 3) fitted with the Revo IS38ETR Turbo and Performance Pack, the Revo intercooler pipe upgrade gave an impressive gain of more than +27HP and +50NM at 3600RPM when compared to the stock parts being fitted, with a constant gain throughout the rev range, most notably from 3500-5000 RPM.   FITMENT   VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi A3 8V 1.8 / 2.0TSI 2012 > Audi S3 8V 2.0TSI 2012 > Audi TT / TTS 2.0TSI 2015 > Seat Leon 1.8 / 2.0TSI 2013 > Skoda Octavia 1.8 / 2.0TSI 2013 > Skoda Superb 1.8 / 2.0TSI 2015 > VW Golf Mk7 / Allroad / Sportwagen 1.8 / 2.0TSI 2013 > VW Golf Mk7 GTI / R 2.0TSI 2014 > VW Passat 1.8 / 2.0TSI 2015 > VW Tiguan 2.0TSI 2016 > VW Touran 2.0TSI 2016 >   Notes: Simple replacement of the OEM part Designed to fit with the stock airbox or Revo intake(s). Third-party intakes may cause fitment issues.  Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less

Only The Driven know that the cooler the air, the more power produced. Revo Intercoolers drastically improve your vehicles ability to cool air compressed by the turbo. Increased volume and surface area, bar and plate cores with end tanks specifically designed to promote even airflow all play a part in lowering temperatures; without negatively affecting pressure. REVO AIR INTERCOOLER MQB 1.8/2.0 TSI EA888 GEN3 The Revo Intercooler utilises unique design features to lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software. The unique end tank profile promotes internal laminar flow by decreasing turbulence and increasing airspeed into the bar and plate core. This enhances charge air cooling giving you access to more power throughout the rev range. The limitations of the stock intercooler were apparent throughout testing. The stock part consistently struggled to manage charge air temperatures, even under normal driving conditions. The Revo Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures by up to 36ºC vs. the MQB Golf R intercooler, allowing you to drive harder, for longer. KEY FEATURES Bar & Plate Core Design Fully Cast End Tanks OEM Fitment Up to 51% Increased Core Volume Over 36ºC Lower AIT INCREASED CORE VOLUME The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Designed from the ground up, the Revo Intercooler has much larger core volume than the OEM part and offers perfect fitment, improving cooling by utilising the full volume of the stock location space as well as cold ambient air from the front of the vehicle. END TANK DESIGN The stock end tanks are inefficiently designed and create turbulent air in corners. These sections create a natural flow distribution but slow charge air and increase pressure drop. The Revo end tank geometry maintains the largest possible cross-sectional flow area to and from the core. Coupled with a cast interior surface finish, the Revo end tanks allow air to flow freely without obstructions from turbulent air pockets found in the OE intercooler. End tanks play an important part in maintaining pressure and work in harmony with the core to promote airflow, the Revo end tanks are designed to offer the optimal balance between both of these key features.   BAR AND PLATE CORE Designed with a bar and plate core to maximise the efficiency of heat transfer, the pressure drop is also controlled as the air meets less resistance compared to that of a tube and fin alternative. The Revo Intercooler also features carefully specified fin geometry to maximise cooling properties while minimising flow restriction. The ambient core side utilises louvred fins to slow ambient air flow which improves heat transfer, while the charge core side features an offset internal fin design to balance surface area and air resistance to minimise pressure drop.   SILICONE HOSES Supplied with stronger oil resistant silicone hoses, the Revo Intercooler can be installed using the stock pipework or recommended Revo Intercooler pipework. The internal diameter of each silicone is precisely matched to the outer diameter of the ribbed inlet and outlet connections along with a unique Flush Fit design, allowing a smooth transition between components.   BRACKETS To ensures precision fitment, Only Revo offers a CNC machined bracket system. Produced to a superior tolerance than that of a cast mounting system, this unique feature also ensures that the supporting brackets are strong and less prone to failure.   RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house Hub dyno and Revo data acquisition software. The Revo intercooler minimises turbulence while maximising heat transfer, promoting cooler air temperatures and low-pressure drop. This helps retains power and torque throughout of the rev range as highlighted during controlled Dyno testing. The Revo Intercooler was tested in-house to compare the performance against that of the stock Intercooler. First tested on a vehicle running the OEM Intercooler with Revo Stage 2 software, a Revo air intake system and Milltek downpipe, the Revo Intercooler was then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling. PERFORMANCE DATA Golf GTI with Revo Stage 2 Software, Golf R intercooler and Carbon Series Front Scoop Showing the last of five consecutive dyno runs, the efficiency of the Revo Intercooler over the OEM Golf R intercooler is highlighted. With max gains of +10 HP & +20NM Torque, along with increased performance throughout the entire rev range, the stock intercooler struggles to effectively function in comparison to the Revo Intercooler which remained consistent throughout, losing just 2% peak power over the 5 runs compared to 5% on the stock cooler. INLET TEMPERATURE This is a metric used to confirm that testing on the Revo MQB Intercooler. This is used to show that the air temperatures going into the intercooler were similar for each test, confirming that outlet temperatures shown in the following graphs are purely down to differences in intercooler design/construction. As can be seen, the inlet temperatures during testing were hotter on the Revo Intercooler, yet the Revo intercooler produced the lower outlet temps proving the cooling efficiency. OUTLET TEMPERETURE This graph illustrates the increased cooling performance of the Revo intercooler vs OEM Golf R intercooler over all five runs. The Revo Intercooler keeps temperatures below 49ºC on the fifth run, lower than the stock on its first at 58ºC.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi A3 8V 1.8 / 2.0TSI 2012 > Audi S3 8V 2.0TSI 2012 > Audi TT / TTS 2.0TSI 2015 > Seat Leon 1.8 / 2.0TSI 2013 > Skoda Octavia 1.8 / 2.0TSI 2013 > Skoda Superb 1.8 / 2.0TSI 2015 > VW Golf Mk7 / Alltrack / Sportwagen 1.8 / 2.0TSI 2013 > VW Golf Mk7 GTI / R 2.0TSI 2014 > VW Passat 1.8 / 2.0TSI 2015 > VW Tiguan 2.0TSI 2016 > VW Touran 2.0TSI 2016 > DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo MQB Golf / Octavia / Leon Intercooler Instructions FITTING INSTRUCTIONS Download the Revo MQB A3 / S3 Intercooler Instructions NOTES Simple replacement of the OEM part Also available for the Golf Mk5/6 MLB Platform Will not fit on cars with O2 sensors fitted without interference on the sensor. It is recommended to speak with your dealer before if you are unsure.

Read more less

Pro Hoses two-piece boost hose kit for Fiesta MK8 ST-200 – With wire insert!   To replace the stock intercooler boost hoses.  

Read more less

Pro Hoses two-piece boost hose kit for PUMA MK2 ST – With wire insert!   To replace the stock intercooler boost hoses.  

Read more less

REVO INTERCOOLER FORD PUMA MK2 ST 1.5 ECOBOOST The Revo Intercooler utilises unique design features to lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software. The unique end tank profile promotes internal laminar flow by decreasing turbulence and increasing airspeed into the bar and plate core. This enhances charge air cooling giving you access to more power throughout the rev range. The limitations of the stock intercooler were apparent throughout testing. The stock part consistently struggled to manage charge air temperatures, especially. On vehicles with performance software. The Revo Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures by up to 34ºC vs. the PUMA MK2 ST intercooler, allowing you to drive harder, for longer. KEY FEATURES Bar & Plate Core Design Fully Cast End Tanks Reinforced Mounting Brackets Intercooler Pipes Included Up to 58% Increased Core Volume Over 34ºC Lower AIT   INCREASED CORE VOLUME The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Designed from the ground up, the Revo Intercooler has a 58% larger core volume than the OEM part and offers perfect fitment. By removing the “air separation dam” it allows access to a volume of unused engine bay space to be filled with the intercooler core. INTERCOOLER HEIGHT The decision to manufacturer the cooler at ¾ height and not fill all the available space was key in balancing the performance benefits against functionality. Offering the most efficiency per-cubic-cm cooling capacity and minimising pressure drop, whilst managing unnecessary weight. Also allowing sufficient airflow to the vehicle’s radiator and air ducting.   END TANK DESIGN The Revo end tank geometry maintains the largest possible cross-sectional flow area to and from the core. With a cast interior surface finish, the Revo end tanks allow air to flow freely without obstructions. The design has been balanced between core width and optimal tank profile design. End tanks play an important part in maintaining pressure and work in harmony with the core to promote airflow, the Revo end tanks are designed to offer the optimal balance between both of these key features.   BAR & PLATE Designed with a bar and plate core to maximise the efficiency of heat transfer, the pressure drop is also controlled as the air meets less resistance compared to that of a tube and fin alternative. The Revo Intercooler also features carefully specified fin geometry to maximise cooling properties while minimising flow restriction. The ambient core side utilises louvred fins to slow ambient airflow which improves heat transfer, while the charge core side features an offset internal fin design to balance surface area and air resistance to minimise pressure drop.   INTERCOOLER PIPE UPGRADE Supplied with an upgraded silicone charge and throttle pipes. The increased diameter pipework ensures the maximum performance by increasing system volume by over 17%. The internal diameter of each silicone is precisely matched to the outer diameter of the ribbed inlet and outlet connections along with a unique Flush Fit design, allowing a smooth transition between components. This has done away with the stock “quick-connect” hose couplings and removes the restrictions present in the charge systems. RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house Hub dyno and Revo data acquisition software. The Revo intercooler minimises turbulence while maximising heat transfer, promoting cooler air temperatures and low-pressure drop. This helps retains power and torque throughout the rev range as highlighted during controlled Dyno testing. The Revo Intercooler was tested in-house to compare the performance against that of the stock Intercooler. First tested on a vehicle running the OEM Intercooler with Revo Stage 1 software, a Revo open cone air intake system and Milltek GPF back exhaust, the Revo Intercooler and pipes were then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling.   PERFORMANCE DATA Showing the last of six consecutive dyno runs, the efficiency of the Revo Intercooler over the OEM PUMA MK2 ST intercooler is highlighted. With peak gains of +10 HP & +28NM Torque, along with increased performance throughout the entire rev range. The stock intercooler struggles to effectively function in comparison to the Revo Intercooler which remained consistent throughout. INLET TEMPERATURE This is a metric used to confirm that testing on the Revo PUMA MK2 ST 1.5 EcoBoost Intercooler. This is used to show that the air temperatures going into the intercooler were similar for each test, confirming that outlet temperatures shown in the following graphs are purely down to differences in intercooler design/construction. As can be seen, the inlet temperatures during testing were hotter on the Revo Intercooler, yet the Revo intercooler produced the lower outlet temps proving the cooling efficiency. OUTLET TEMPERATURE This is the main performance metric to illustrate that the Revo intercooler far exceeds the stock unit. A strong indication that the Revo intercooler is extremely resistant to heat soak and could likely continue for tens more sequential dyno runs before any intake temperature-related issues arose. The graph illustrates the increased cooling performance of the Revo intercooler vs OEM ST intercooler over all six runs. The Revo Intercooler provided a massive 34.4°C max and 12.8°C average intake air temperature reduction across the six back to back full gear dyno runs. INTERCOOLER PRESSURE DROP GRAPH Pressure drop is an important factor when it comes to choosing an Intercooler. The Revo solution features custom cast end tanks to evenly distribute air over the core. This graph highlights that even with massive core size difference there is only a 0.11psi pressure drop in comparison to the stock intercooler, ensuring engine response and minimised turbo lag. You can rest assured that your vehicle will drive and respond as you would expect standard; until you press that pedal!     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford PUMA ST 1.5 EcoBoost 2018 onwards DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Ford PUMA MK2 ST Intercooler Instructions NOTES Simple replacement of the OEM part © Revo

Read more less

Racingline Polo Mk6 GTI (AW) Boost Hose Upgrade Kit – VWR140010 Welcome to the ultimate Boost Hose Kit for Polo GTI AW. The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels. By minimising restrictions, the smoother airflow and optimised routing ensures the turbo meets less resistance and can thus perform more effectively – moving a larger volume of air and minimising turbulence Direct OEM replacement: simply remove the old weak, flexible rubber hoses and replace them with our four-piece kit Pressure tested far beyond the turbo’s capabilities, the system maintains performance under extreme temperature and high-boost conditions Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus non-stepped designs Applications For MQB A0 models with 2.0 TSI EA888.3 VW Polo 6 GTI 2.0 TSI AW 2017-2021 Audi A1 40TFSI GB 2019+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR140010

Read more less

The Racingline Performance Intercooler System is the best performing intercooler upgrade on offer for the MQB-platform Golf 7 GTI, R and Audi S3 as well as all the other vehicles based on the same platform; with proven race championship performance to back that up. The factory intercooler has shown itself to be unable to cope with the demands of higher power, hard driven cars. By consistently reducing intake air temperatures (IAT), heat soak is minimised delivering increased performance again and again without the recovery cool-down times needed for the production intercooler. The giant 56mm core depth of the system uses careful optimised fin design, delivering the sweet spot’ of maximum IAT cooling versus minimum pressure loss. This has allowed us to achieve increased size without increased lag. The Racingline Performance Intercooler System is a direct bolt-on replacement for the stock intercooler. It really is essential for every stage of tuning on any high performance MQB-platform car Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi S3 (8V) 2012-present Audi TTS (8S) 2014-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

Racingline Silicone Boost Hose Kit for MQB EA888 Gen.3 – VWR140004 The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.The kit is a direct OEM replacement: simply remove the old weak, flexible rubber hoses and replace them with our five-piece kit. Simple. Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus other non-stepped designs.  Of course our kit is pressure tested far beyond the turbo’s capabilities, the system maintains performance under extreme temperature and high-boost conditions.By minimising these restrictions, the smoother airflow and optimised hose routing ensures that the turbo meets less resistance and can thus perform more effectively – moving a larger volume of air and minimising turbulence.The RacingLine Boost Hose Kit is probably the only one on the market which comes with five hoses included – although you will only need to fit four of them.The choice of which Turbo Outlet Pipe (bottom) depends whether the car is pre- or post-2017. It’s really easy to choose which to use:  it’s either long or short depending on what OEM pipe is removed, meaning that (unlike other kits) you can’t really get this wrong!  Designed to work in perfect harmony with the Racingline MQB Intercooler Compatibility > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020> VW Golf 7 & 7.5 R 2013-2020> VW Golf 7 & 7.5 1.8 TSI 2013-2020> VW Passat 2.0 TSI B8 2015+> VW Arteon 2.0 TSI 2017+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II 2.0 TSI 2016+> VW Jetta VII GLI 2019+ > Audi S3 8V 2013-2020> Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020> Audi TT 3 2.0 TSI 8S 2014+> Audi TTS 3 2.0 TSI 8S 2015+> Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020> SEAT Leon III 1.8 TSI 5F 2014-2020> SEAT Ateca Cupra 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020> Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR140004

Read more less