All

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the Mk3 Focus RS. The original undertray on this car is notoriously weak due to the fibre material construction and as a result are prone to failure over time. Our solution to creating a direct replacement undertray in aluminium began with a full 3D scan of the vehicle’s underside to ensure a perfect fitment. As a result, it reuses all original mounting points, as well three additional fittings on the front edge, and is nut and bolted both sides to ensure absolute security. Unlike any other replacement undertray on the market, our design features no step, which is better suited to lowered cars. The cooling ducts are also larger in size to increase air flow passing over the gearbox and transfer case, which helps to reduce transmission operating temperatures and the sides pieces are larger to create a seal against the arch liners. Finished in a high-quality black powder coat finish, the undertray offers improved strength, durability and cooling effectiveness. PLEASE NOTE: The undertray uses existing mounting points and bolts, but it is essential the original plastic fittings the bolts screw into are in good condition. These should only be reused if they still support the bolt properly and you are able to tighten it firmly. If they are worn or broken and offer little to no resistance as you wind the bolt in, they should be replaced with new items from Ford, as failure to do so may cause the undertray to work loose. The Ford part number for the plastic undertray fittings are as follows: W702438-S300  Features: Direct replacement for original Focus RS Mk3 undertray Created from 3D scan and CAD software for perfect fitment Made from high-quality aluminium for increased strength Uses original mounting points – no cutting or drilling required Additional mounting points for absolute security  Improved transmission cooling due to larger ducting Comes in a durable black powder coat finish Registered Design Right number: Application Pending AIRTEC part no: ATMSFO149

Read more less

Ford Focus Mk2 Facelift Bonnet Lifter Kit This kit is an extremely easy modification to make to your Focus,Replace the stock bonnet prop with the bonnet lifter kit . Designed for Focus Mk2 facelift models Kit includes: 2 x Gas-charged struts 2 x Bonnet hinge brackets 2 x Wing brackets

Read more less

As part of our expanding Mini product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the F56 JCW & Cooper S (pre-LCI) model, suitable for track or fast road use. AIRTEC Part No: ATMSMINI10 TECHNICAL DATA As part of our expanding Mini product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the F56 JCW & Cooper S (pre-LCI) model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Mini F56 JCW & Cooper S (pre-LCI) model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet alloy bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Mini F56 JCW & Cooper S (pre-LCI) Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSMINI10

Read more less

AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Focus Mk4 utilises the available space to integrate seamlessly within the engine bay. It features a unique high-quality billet-machined bracket, finished in powder-coated matt black, which allows the catch can to attach neatly in place. Please note: DOES NOT FIT LEFT HAND DRIVE MODELS. TECHNICAL DATA As part of our expanding Mk4 Focus ST product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Focus Mk4 utilises the available space to integrate seamlessly within the engine bay. It features a unique high-quality billet-machined bracket, finished in powder-coated matte black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, which detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can works as a filter to catch harmful contaminants before they can reach the inlet system. Please note: DOES NOT FIT LEFT HAND DRIVE MODELS.  Features: Kit developed specifically for the Mk4 Focus ST Easy, direct fit Internal baffle and dipstick Powder coated black finish Billet machined bracket Comprehensive fitting guide AIRTEC Part No: ATMSFO125

Read more less

As part of our expanding VW product range, AIRTEC Motorsport is proud to launch our oil catch can kit for the Mk7 Golf R for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Golf R model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality, laser cut bracket finished in powder coated black, which allows the catch can to attach neatly in place and also locates the new washer fluid tank filler. The can itself features an internal micron filter, baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide.   Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can works as a filter to catch harmful contaminants before they can reach the inlet system.   Features:  Kit developed specifically for the Mk7 Golf R platform Helps to prevent build-up of oil residue in the intake system Maintains optimum engine performance Easy maintenance to check oil level and drain tank Simple direct fit Laser cut bracket Comprehensive fitting guide

Read more less

AIRTEC Motorsport Oil Catch Can Kit for BMW M3/M4 & M2 Competition   We’re proud to launch our oil catch can kit for the S55 engine fitted in the BMW M3/M4 & M2 Competition for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC part no: ATMSBMW2 AIRTEC Motorsport Oil Catch Can Kit for BMW M3/M4 & M2 Competition   We’re proud to launch our oil catch can kit for the S55 engine fitted in the BMW M3/M4 & M2 Competition for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the BMW M models utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in anodised matt black, which allows the catch can to attach neatly in place. The can itself features an internal micron filter, baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can works as a filter to catch harmful contaminants before they can reach the inlet system.   Features:  Kit developed specifically for the BMW S55 platform Easy, direct fit Billet machined bracket Comprehensive fitting guide

Read more less

We’re proud to launch our oil catch can kit for the Toyota Yaris GR for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. TECHNICAL DATA AIRTEC Motorsport Oil Catch Can Kit for Toyota Yaris GR   We’re proud to launch our oil catch can kit for the Toyota Yaris GR for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Yaris model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in powder-coated matt black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. An catch can works as a filter to catch harmful contaminants before they can reach the inlet system.   Features:  Kit developed specifically for the Yaris GR Easy, direct fit Billet machined bracket Comprehensive fitting guide AIRTEC part no: ATMSYGR02

Read more less

As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade suitable for track or fast road use. AIRTEC part no: ATMSHYU4 TECHNICAL DATA As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the i20N model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can works as a filter to catch harmful contaminants before they can reach the inlet system.   Features:  Kit developed specifically for the i20N Easy, direct fitment Internal baffle and dipstick Powder coated black finish Billet machined bracket Comprehensive fitting guide Registered Design Right number: AIRTEC part no: ATMSHYU4

Read more less

As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our additional cold air feed guide for the ST model. During the development of our AIRTEC Motorsport enclosed air box and oil cooler kits, we created an additional comprehensive solution to further improving the car’s cooling ability and reduce air intake temperatures on track or during fast road use. AIRTEC Part No: ATMSFO130 TECHNICAL DATA As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our additional cold air feed guide for the ST model. During the development of our AIRTEC Motorsport enclosed air box and oil cooler kits, we created an additional comprehensive solution to further improving the car’s cooling ability and reduce air intake temperatures on track or during fast road use. With vast experience in developing uprated cooling packages for a variety of modified track and road cars, the challenge with the Mk8 Fiesta ST was the very limited available space directly behind the open grille area. As a result, we developed an innovative air guide solution to help direct larger volumes of cold air towards the original top air intake feed. The size of the air guides are not only larger than standard but the guide also features a side air duct, utilising the space in the upper right-hand section of the grille area to feed cold air through trunking to either the Enclosed Induction Kit or our soon to be released AIRTEC Motorsport Oil Cooler Kit. Made from aluminium, the kit includes all fixtures and fittings, including instructions, for a simple bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk8 ST models. Please note: Fits with any aftermarket intercooler that retains OEM plastic upper surround. This will NOT fit with AIRTEC Motorsport Stage 3  – please see here: AIRTEC  Cold Air Feed for MK8 ST Stage 3 Intercooler Features: Comprehensive kit designed specially for the Mk8 Fiesta ST platform Reduces temperatures on track and road Larger air guides direct more flow towards the original intake Also directs a constant feed of cold air to the air box or oil cooler Reduces temperatures on track and road Designed and developed in the UK No cutting or drilling required to fit Bespoke laser-cut aluminium design High quality powder coated black finish Complete with all fittings and instructions AIRTEC Part No: ATMSFO130

Read more less

As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our double front air feed for the pre-facelift (2019 to 2022) ST model suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a simple but effective double air scoop to mount behind the grille and replace the original, which only channels air through one side of the grille opening. Our direct replacement part feeds cold air through both sides of the grille, improving the flow of fresh air to the intake. The laser-cut scoops are made from lightweight aluminium and finished in a high quality powder coated black finish. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be and includes all fixtures and fittings, including instructions for a bolt-on installation. Please note: This item will not fit in conjunction with the AIRTEC Motorsport Mk4 Focus ST oil cooler kit Fits pre-facelift (2019 to 2022) models only Features: Comprehensive kit designed specially for the Mk4 Focus ST platform Scoop directs constant feed of cold air to the intake Designed and developed in the UK No cutting or drilling required to fit Bespoke laser-cut and powder coated scoops Includes all fixtures and detailed instructions AIRTEC Part No: ATMSFO135

Read more less

TECHNICAL DATA Using our knowledge and experience in designing functioning front splitters for various Clubsport race series’ in the UK, we have produced a comprehensive, double-lipped, one-piece moulded design to suit the Yaris GR. Unlike a lot of aftermarket splitters, the upper edge has been profiled to perfectly meet the lower part of the front bumper, which ensures there is no gap or pocket that allows air to get trapped and create a negative effect. Finished in lightweight but strong GRP material with a gloss gel coat finish, the splitter can be secured in which ever way is preferred. AIRTEC Part No: ATMSYGR22   PLEASE NOTE: Drilling to the bumper is required to fit this product Will only fit a Yaris GR (2020 to 2024) front bumper  We endeavour to deliver an extremely high-quality product but due to the handmade manufacturing process there is the possibility of imperfections. Therefore the appropriate prepping and painting is recommended before fitting.

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our uprated DCT undertray for the E90, E92 and E93 M3 models. The front part of the original undertray on these cars is notoriously weak due to its fibre material construction and as a result is prone to failure over time. Our solution is a direct replacement undertray made in aluminium that reuses all of the original mounting points to ensure a perfect and secure fitment. Finished in a high-quality black powder coat finish, the undertray offers improved strength and durability, and is supplied with all fixtures and fittings, including installation instructions. Fitment: Replaces BMW part number 51757898849   Features: •     Direct replacement for original E9x M3 DCT undertray •     Made from high-quality aluminium for increased strength •     Uses all original mounting points – no cutting or drilling required •     Comes in a durable black powder coat finish •     Supplied with all fixtures and fittings •     Installation instructions included  

Read more less

TECHNICAL DATA AIRTEC Motorsport Astra H VXR engine breather kit. Simple bolt on design that takes less than 30 minutes to install. Can be fitted with standard hoses or add our optional extra Pro Hoses silicone hoses. Kit includes: All fittings and fixtures required to fit 1x breather tank 1x fitting guide 2x OPTIONAL silicone hoses Gloss Black, Race Red, Performance Blue normally kept in stock. Other colour hoses, made to order Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange, Purple, Vivid Pink, Nitrous Blue, Ultimate Green, Nitrous Blue Please allow 2-4 weeks for delivery.

Read more less

For improved engine bay looks, AIRTEC Motorsport is offering an aesthetic engine cover. This direct replacement part is very easy to fit and smartens the appearance the engine bay. AIRTEC Motorsport Part No: ATMSP3081

Read more less

As part of our expanding Toyota Yaris GR product range, we’ve developed an aluminium engine cover. This direct replacement part is easy to fit and smartens the appearance of the engine bay, whilst still allowing access to the oil filler cap and dipstick. Raised from the engine to help dissipate heat, the design also features additional venting at the rear, which is closest to the turbo.  Finished in a high-quality black powder coat for durability, the cover comes with all fixtures and fittings, as well as detailed installation instructions.  A simple and effective modification that can be fitted in minutes.  Registered Design Right: Application Pending  AIRTEC part no: ATMSYGR24

Read more less

Designed at AIRTEC Motorsport, we developed this breather kit package to suit modified Fiesta ST150 models after finding our own supercharged demo car would often show signs of excessive oil residue pushed through the breather pipes, cam cover and crank case breather during fast road and track use. This would in-turn cause residue and vapour build up as well as smoke as the excess oil was diverted back into the intake and ultimately into the engine’s inlet. We have also seen similar traits in naturally aspirated examples with uprated camshafts or even remaps. Our kit is based around an oil breather tank that is designed to separate the oil from the vapour where it would usually be diverted back into the intake. The tank then collects the oil and features a level indicator, which once full can be easily emptied by removing the drain located at the bottom. The kit also includes an inlet manifold blank off pipe (as you will not need the  to breathe back into the inlet manifold anymore), as well as two specially made Pro Hoses silicone lines, a mesh filter and all fixtures and fittings, including jubilee clips.  This kit is designed to fit with the original PCV set up but can be adapted to fit with our AIRTEC Motorsport billet PCV baffle plate (or other aftermarket PCV plates) with an additional hose and fitting – please get in contact with your specific requirements. The tanks are available in silver, black or polished finishes – please choose from options. Features:  Kit designed specifically for the Fiesta ST150 model Helps the engine breathe better and reduce oil residue build up AIRTEC Motorsport oil breather tank with oil level indicator High quality Pro Hoses silicone lines, specific for this model Tanks available 3 finishes and hoses available in 3 colours All fixtures and fittings included in the comprehensive kit Fitting takes approximately 20-30 minutes AIRTEC part no: ATMSFO58

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER52 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats    Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.  Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only   ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available  ⦁     Vehicle specific – no trimming required  AIRTEC Part Number: ATMER52

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.    AIRTEC Part Number ATMER41:  TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats  Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.  Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only   ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available  ⦁     Vehicle specific – no trimming required  AIRTEC Part Number: ATMER41

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats   Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats    Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.  Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only   ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available  ⦁     Vehicle specific – no trimming required  AIRTEC Part Number: ATMER37

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER38 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only ⦁     AIRTEC Motorsport branded complete set of front and rear mats⦁     Fitted with original retaining/mounting holes where applicable⦁     High-quality finish in black with white embroidered logo⦁     Huge range of makes and models available⦁     Vehicle specific – no trimming required AIRTEC Part Number: ATMER38

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.  AIRTEC Part Number:  ATMER39 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats  Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.  Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only   ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available  ⦁     Vehicle specific – no trimming required  AIRTEC Part Number:  ATMER39

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.     Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting.   Fits Right-Hand Drive vehicles only     ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available   ⦁     Vehicle specific – no trimming required   AIRTEC Part Number: ATMER40 

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER49 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only ⦁     AIRTEC Motorsport branded complete set of front and rear mats⦁     Fitted with original retaining/mounting holes where applicable⦁     High-quality finish in black with white embroidered logo⦁     Huge range of makes and models available⦁     Vehicle specific – no trimming required AIRTEC Part Number: ATMER49

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER48 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only ⦁     AIRTEC Motorsport branded complete set of front and rear mats⦁     Fitted with original retaining/mounting holes where applicable⦁     High-quality finish in black with white embroidered logo⦁     Huge range of makes and models available⦁     Vehicle specific – no trimming required AIRTEC Part Number: ATMER48

Read more less