All

An Alloy Header Tank for BMW Mini 2007 onwards Cooper S Models. Hand crafted and polished in the UK making for an easy fitment and replacement. If you are unsure if this product is suitable for your application, please contact us.  FITS: R55 CLUBMAN  R56 HATCHBACK R57 CONVERTIBLE R58 COUPE R59 ROADSTER     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description 28mm Straight Hose - 500mm

Read more less

Product Description 63mm Straight Hose - 500mm

Read more less

Adjustable Actuator for Subaru IHI VF35/VF34 Turbo GDB - However, this is not suitable for spec C. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMAC2SUB Actuator1 x Forge Sticker fits: AudiA32.0 FSiTTTMk22.0SeatLeonMk2 2005-2012Cupra 2.0 TFSiSkodaOctavia2.0 FSiTVolkswagenEOSGolfMK5GTIPassat2.0 FSiTTiguan 2.0 FSiT   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description Average gains of 5.5bhp Gains of 16bhp at peak and average of 10bhp from 4500rpm when coupled with FMTIA5/9 Average gain of 20NM of torque Prepreg 2x2 twill formed carbon fibre Dyno proven Great induction noise More responsive throttle Lifetime Warranty Compatible Vehicles: Audi A3 1.8/2.0 TSI 2015 Onwards S3 2.0 TSI (8V Chassis) 2.0TSI (8Y Chassis) Sportback 2.0TSI (8Y Chassis) TT Mk2 2.0 TTS Mk3 8S (2014-2021) Mk3 8S 316bhp (late 2022-) Cupra Ateca VZ1, VZ2, VZ3, VZN 2021- Formentor 2.0 TSI (245 BHP) 2.0 TSI (310 BHP) Leon VZ1, VZ2, VZ3 Seat Leon Mk3 2012-2020   Skoda Octavia VRS 2.0 TSI 2013 Onwards Octavia 4 RS Superb 280 4x4 DSG Volkswagen Arteon 2.0 TSI Golf MK7 1.8 TFSI GTI GTI Clubsport ED40 R MK7.5 GTI  R MK8 Clubsport 45 GTI GTI S R Passat 2.0 TSI (2015-2021) T-Roc 2.0 2018-2021 Tiguan 2.0 TSI 2017 Onwards R 2022 Onwards (Gen 4) With the release of the VW Golf MK8 R, the development team at Forge Motorsport knew that there would be a great opportunity to help the EA888 engine breathe easier and make more power. We were lucky to get one of the first MK8R’s to enter the UK and used this opportunity to put months of development and testing into this new induction kit. Our MK8 Golf R has been put through countless hours of track day work and hill climbs, alongside the usual daily and spirited driving. This kit has been designed from the ground up, using 3D Scanning, FEA Simulation data in SolidWorks CAD, 3D printed development, and numerous dyno sessions to truly unlock the power. Simulation testing played a large part in the design process to help maximise the airflow. This included a tear drop cavity around the bonnet release mechanism to ensure that the airflow stays fast and laminar on its way to the filter element. The 3D printed prototypes helped with comparing our simulation testing to real world driving conditions. This is a valuable comparison that is used in the top tiers of motorsport, now being brought to your vehicle. During the final prototypes testing we found that the Forge induction kit with stock turbo inlet produced gains on average of 5.5BHP. However, when paired with our Turbo Inlet Adaptor FMTIA5/9 this is where the stock EA888 engine saw impressive gains, increasing power up to 16BHP at 6500RPM with a significant average power increase from 4500RPM to the 6700RPM Rev limit of 10BHP, while the drivability and the punch from extra torque increases can be felt on the road as between 4000RPM to the rev limit an average gain of 20NM is achieved. It’s worth remembering that this is with a stock ECU and no tune, so we would expect to see mapped cars returning even greater yields of power. This induction kit runs the full width of the slam panel, incorporating an elegant lip which neatly slides under the slam panel to ensure that all the cold air from the front of the vehicle flows through into the inlet tract with no detriment from the engines heat. During testing we found this to make a significant increase to airflow and a reduction to inlet air temperatures (IAT’s). Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of the engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level; which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder (providing the correct amount of fuel is added) - this equates to an increase in BHP and torque. It’s worth noting that this induction kit offers a massive amount of air to the EA888 engine, which is a must for anyone looking to push the performance of their car when tuning to stage 1, stage 2, and beyond. Not only do you get the bhp performance benefits, but INDK40 also offers a greater sound from the engine; particularly when on boost, and our product testers have reported a more responsive throttle too. Careful consideration into the other platforms that share the same engine configurations had also been at the forefront of our development engineers’ minds. This needed various vehicles to be sourced to ensure a perfect fit for many of the VAG groups performance vehicles. You have only got to look at our compatibility list to realise how much research and development have gone into this extraordinary performance induction kit. FMINDK40 is part of our acclaimed Hi Flow range and will ensure that your vehicle is getting critical cold air. Not only is the Forge part a better option for performance, but the carbon fibre really helps to give the engine bay some character. The high-quality carbon fibre is prepreg 2x2 twill formed in an autoclave from billet tooling and finished with an anti UV gloss gel coat. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy. The kit comes complete with everything you need for installation, which can be carried out in around 1 hour, including a set of full colour instructions. For such an easy to fit product it truly does create some remarkable gains. You can find a replacement filter here. *Please note - the filter is excluded from the Forge lifetime warranty*

Read more less

Fits: Focus RS Mk1 Models: 2002 - 2004 6 Line set  Why should I change my to Braided Stainless Steel ones? YOUR SAFETY!! Better brake pedal feel – firmer under pressure More efficient braking- the PTFE lined, Stainless steel will not expand under load unlike OEM rubber hoses Long Lasting- PVC outer and Stainless-Steel end fittings will outlast the standard Mild Steel and rubber lines many times Available in many outer colour options to compliment your vehicle Rigorously tested and approved to the FMVSS 106 certification standards

Read more less

Fits: Focus RS Mk2 Models: 2009-2011 4 Line set  Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal feel – firmer under pressure More efficient braking- the PTFE lined, Stainless steel will not expand under load unlike OEM rubber hoses Long Lasting- PVC outer and Stainless-Steel end fittings will outlast the standard Mild Steel and rubber lines many times Available in many outer colour options to compliment your vehicle Rigorously tested and approved to the FMVSS 106 certification standards    

Read more less

Fits: Transit (including custom) Models: 2017 - Present 4 Line set  Why should I change my to Braided Stainless Steel ones? YOUR SAFETY! Better brake pedal feel – firmer under pressure More efficient braking- the PTFE lined, Stainless steel will not expand under load unlike OEM rubber hoses Long Lasting- PVC outer and Stainless-Steel end fittings will outlast the standard Mild Steel and rubber lines many times Available in many outer colour options to compliment your vehicle Rigorously tested and approved to the FMVSS 106 certification standards    

Read more less

Product Description Forge / Pipercross 80mm I/D Rubber Neck Open Cone Air Filter High flow foam construction with a foam top for increased surface area and an inner cage for support. Replacement filter for the following kits: FMINDAVXRH - Astra Vxr induction kit FMINDR35 - Nissan R35 GTR induction kit FMINDIB12 – Seat Ibiza 1.2 TSi *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.

Read more less

*Before purchase and to ensure compatibility please check that your intake configuration is the same as the photograph at the end of the text. Please note this product does not fit the Golf GTE Model, Please see FMINDK14-GTE.  This product is ideally fitted in conjunction with the product FMDV1 (1.2/1.4 TSI Dump valve and fitting kit). If purchased as a stand-alone product the turbo inlet hose will push up against the adjacent OE charge pipe, and a trim to the turbo inlet leg of the FMINDK14 induction hose may be required to avoid creasing. Highlights Part of the Forge Motorsport Hi-Flow range Increases air flow and improves efficiency and performance Up to 10 BHP gain Strong, tight carbon fibre weave Made from 100% carbon fibre with no fibre glass added Formed by Autoclave Pre Preg Easy installation Flurosilicone lined hose High flow cleanable airfilter with no need to ever replace Includes our Forge Motorsport Limited Lifetime Warranty This is the second product to be released in our new ‘Hi-Flow’ range. With this unique sleek design, you can expect to see a carbon fibre housing that flows beautifully along the engine bay, giving you more horse power and torque, and hopefully an appreciation for the care and time that has gone into the production. It includes a billet machined coupler made to exact tolerances at our machine shop in Gloucester, UK, ensuring a perfect fit. The hose is available in red, blue or black and is supplied with all necessary hose clamps.     The Design Following the success of our carbon fibre intake for the Mk7 Golf we knew that we wanted to continue with our ‘Hi-Flow’ range and bring out an affordable option to the 1.4 TSI market. We conducted intense market research, speaking to tuners and owners of the vehicles we wanted the intake to fit. We concluded that rather than creating an entire carbon fibre intake system, the best product to create would be a carbon fibre scoop and airbox lid that fits with original airbox. With this idea in mind we started the design. Using industrial foam and aluminium the concept design was created.  With these components, we could identify the best way to fit the scoop, join it to the air box and mount it to the vehicle. FITS: AudiA31.4 TSI/TFSI 2015 Onwards (8V)Q21.4 150BHPSeatLeonMk3 2012-20201.2 TSI 2014-20201.4 TSI 125/140/150 BHP 2014-2019SkodaKodiaq1.4 150BHPOctavia1.4 150BHPSuperb1.4 150BHPVolkswagenGolfMK71.2 TSI1.4 TSI 125BHP/138BHP/150BHPMK7.51.4 TSI 138BHP/150BHPJettaMK7 (2018-2021)1.4 TSITiguan 1.4 150BHPTouranII 1.4 150BHP Once the first concept was completed our engineers used the latest technology to create a 3D rendering of how we wanted the intake to look.  Throughout the drawing process we ran simulated air flow tests, this way we could ensure that we would create a product with the most efficient flow possible. The carbon fibre prototype was made and fitted to the vehicle. The design is one of the most aesthetically pleasing and practical on the market To ensure we deliver the best quality product we could and following the extensive design and development of this intake, we enlisted the services of one the world’s leading Carbon fibre manufacturers, who’s products range from F1 aero, carbon fibre car bodies and aircraft wings! Tooling was then CNC machined from billet aluminium to ensure the finished product was flawless. This enables us to create a perfect airbox using the autoclave technique during the manufacturing process of the 2x2 twill carbon fibre. Rather than using a vacuum (also known as liquid infusion) to draw the resin through the mould then pulling the raw carbon fibre cloth to the mould shape, a technique known as Autoclave is used in the manufacturing of this beautifully designed product. This involves the use of up to 10 bar of pressure that is blown into a 100% billet mould to force it out. This high amount of pressure ensures the material is fully in contact with the surface of the mould.  Therefore, making sure the weave is tight, solid and strong, this process also ensures there are no imperfections in the product. The mould is then heated to cure the resin which in turn gives a tensile strength up to eight times stronger than mild steel but at a fraction of the weight. Having spent so much time on the carbon and silicone development we then turned to the equally important aspect of filtration.     Going with the Flow With the lid and scoop design completed we moved on to the hose and filter.  There is no point creating such an efficient system for it then to be restricted by the OEM hose and filter.  Therefore, for the filter we engaged our partners and experts in Filtration Control, Pipercross! With over 25 years’ experience in both the domestic and motorsport market they recommended a multi-layer foam construction filter, these filters work perfectly in our ‘Hi-Flow’ range. The large filter provided, flows 30% more air than stock and fits snuggly within the housing. This combination is second to none. The Forge Motorsport high flow intake hose that is mated to the carbon airbox eliminates the highly restrictive plastic and noise restricting inlet pipe, and replaces it with our smooth bore multi-ply silicone hose which increases air flow, improving efficiency and performance. This equates to increases of up to 10hp which is a remarkable gain for an easy to fit bolt on modification. The Forge silicone hose in this kit has been designed to include an expensive inner liner of modified silicone known as Fluorosilicone.     In the Box: 1x Forge Motorsport Hi-Flow, carbon fibre airbox lid1x Forge Motorsport Hi-Flow, carbon fibre front scoop1x Pipercross air filter1x Meguiar’s care pouch and Forge Motorsport Micro Fibre Cloth1x larger bore high flow Silicone hose1x USB with installation instructions.   *Before purchase and to ensure compatibility please check that your intake configuration is the same as the photograph. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description A replacement high flow performance air filter for our popular FMINDK14 and FMINDK14-GTE induction kits. The filter will also replace the paper element for those wishing to remove the restrictions of the OEM unit. Please watch our video on how to fit an air filter without damaging it. FITS: AudiA31.4 TSI/TFSI 2015 Onwards (8V)Q21.4 150BHPSeatLeonMk3 2012-2020SkodaKodiaq1.4 150BHPOctavia1.4 150BHPSuperb1.4 150BHPVolkswagenGolfMK7MK7.5JettaMK7 (2018-2021)Tiguan 1.4 150BHPTouranII 1.4 150BHP

Read more less

Product Description *Please be aware that if your vehicle has the below MAF sensor on the inlet then this intake will not fit your vehicle, we currently do not offer an alternative for MAF vehicles* Forge are proud to present the latest high performance intake for the popular 1.5 TSI Evo engine found in a large selection of vehicles from the VW, Audi, Skoda, and Seat range. This kit features a Forge Ram Air high flow, pleated, synthetic nanofiber filtration filter, that has been manufactured for optimum size and fit to the available space giving superior flow and filtration with enhanced breathing for the 1.5 turbo charged engine. It also features a larger surface area than the stock filter and many competitors’ alternatives. The intake diameters on these air intakes have been carefully tuned to provide exactly the correct quantity of air ensuring solid consistent power gains throughout the rev range without any loss of low-end torque. The pipework is specifically designed to feed the turbo without interruption. The benefit of this is a gain of induction acoustics under acceleration, which improves the driving experience and adds a bit more drama to the TSI EVO engine. FITS: AudiA1A1 (GB) 2018-35 TFSI (1.5 TSI)A335 TFSI (1.5 TSI)Q235 TFSI (1.5 TSI)Q335 TFSI (1.5 TSI)CupraFormentor1.5 TSISeatArona1.5 TSIAteca1.5 TSIIbizaMk5 (KJ) 2017 - late 20211.5 TSILeonMk3 2012-20201.5 TSI 130/150 BHP 2018-Mk4 2022-1.5 TSITarraco1.5 TSISkodaKaroq1.5 TSIKodiaq1.5 TSIOctavia1.5 TSIScala1.5 TSISuperb1.5 TSIVolkswagenArteon(2017-2020)1.5 TSI(2020-)1.5 TSIGolfMK71.5 TSIMK7.51.5 TSIMK81.5 eTSI1.5 TSIPassat1.5 TSIT-CrossT-Cross 1.5 TSIT-Roc1.5TSITiguan1.5 TSITouran1.5 TSI Left hand drive intake Right hand drive intake As with all our intakes we design, high air flow is considered absolutely paramount, thus, we endeavoured to incorporate a large bore silicone high flow pipe with turbo inlet adaptor included. This helps to aid the engines performance and air flow in several ways. Designed in a similar way to a conventional velocity stack, it routes the air more directly into your turbo charger and allows more air than the stock inlet tract to be compressed due to its larger capacity. This can have a positive effect on accelerating your vehicle after long deceleration or between gear changes as more air is being kept within the intake system. The Forge developed inlet tract has more than a 50% increase in volume with the area at the mouth of the turbo increased to 46%. This, combined with no internal baffles or noise restrictors gives a helping hand to the vehicles acoustic notes and throttle response. With the use of Solidworks®, our CAD engineers have designed the heat shroud to fit round all the contours of the engine bay. This shroud combined with our specially formulated thermal coatings protects the intake from radiant heat while also guiding the cold air from the OE cold air ducting to the filter and housing. All of the billet components supplied have been made from 6082 Alloy and then anodised to ensure the alloy has no fatigue and stays without corrosion for years to come. This kit completed with stainless steel high quality hose clamps has the usual unrivaled performance you would expect from Forge Motorsport. Each Forge Motorsport intake hose is available in your choice of 3 colours to match the tastes and desired colour themes that you are looking for. Please select your colour choice when ordering. During testing we have achieved gains of up to 11bhp and 13lb/ft throughout the rev range from 2900 RPM. When installed in conjunction with an engine remap and free flowing exhaust the figure can be far greater as the OEM intake system is restricted on high performance engines. The FMINDK30 combined with either our atmospheric dump valve kit FMDV22 or our recirculating valve kit FMDV30 certainly transforms the whole driving experience and engine note of your 1.5 TSI EVO engine. As ever, this product comes with the Forge Motorsport lifetime warranty on all the hardware supplied, giving you the enthusiasts, the best product for your pride and joy.     The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*    fits: AudiA1A1 (GB) 2018-35 TFSI (1.5 TSI)A335 TFSI (1.5 TSI)Q235 TFSI (1.5 TSI)Q335 TFSI (1.5 TSI)CupraFormentor1.5 TSISeatArona1.5 TSIAteca1.5 TSIIbizaMk5 (KJ) 2017 - late 20211.5 TSILeonMk3 2012-20201.5 TSI 130/150 BHP 2018-Mk4 2022-1.5 TSITarraco1.5 TSISkodaKaroq1.5 TSIKodiaq1.5 TSIOctavia1.5 TSIScala1.5 TSISuperb1.5 TSIVolkswagenArteon(2017-2020)1.5 TSI(2020-)1.5 TSIGolfMK71.5 TSIMK7.51.5 ETSI1.5 TSIMK81.5 eTSI1.5 TSIPassat1.5 TSIT-Roc1.5TSITiguan1.5 TSITouran1.5 TSI

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. Please also test for clearance after fitment at the wheel arch under full right and left wheel lock. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 11mm thick with a 66.5mm bore and dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub and are machined with an alloy spiggot to allow centering on the hub. (often called "hubcentric" spacers) The spacers are suitable for most vehicles produced by Volkswagen Group. A 11mm spacer will give an overall track increase of 22mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS10 11mm Wheel Spacer1 x Forge Sticker

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 13 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 13mm spacer will give an overall track increase of 26mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS13 13mm Wheel Spacer1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

The Splitter is a truly remarkable valve that gives a combination of blow off and recirculation valve operation all at the same time and has been specifically designed for the many turbo engined applications that operate metered airflow management sysyems. This means you get all the noise of the blow off valve whilst retaining the compatibility with the recirculation requirements of the engine management system. As a bonus we also offer the ability to convert the valve to recirculation only mode for those times when stealth running is required. This valve uses a Brass piston which utilises new sealing technology along with a variable spring preload incorporating a ratchet type top adjuster that will allow for the positive and precise adjustment to match the valve to your engine. This is achieved by using a unique single, conical, progressive rate spring that can allow for the retention of boost pressure over a wide adjustment range. This unique spring design also allows for unrestricted piston travel and flow volume regardless of the amount of pre-load adjustment added to the spring. Other manufacturers valves using cylindrical springs with adjustable pre-load often experience restricted piston travel and a reduction in flow volume. This valve has 34mm pipe connections.   In The Box:1 x FMBSPLTR Valve1 x Valve Blanking Cap1 x 500mm of 4mm Vacuum Tube1 x Instructions1 x Forge Sticker   To service this valve, access the valve piston by removing the 3 cap screws at the base of the valve and simply clean the piston chamber using brake cleaner or similar cleaning fluid before installing the new spring and piston. Please observe the correct spring and piston orientation when installing the serviceable parts, as seen in the attached drawing.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

 7 piece silicone hose kit to replace the coolant hoses on a VAG 1.8T Golf/Leon/A3/TT The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   FITS: AudiA31.8TTTMk1150/180BHPSeatLeonMk1 1998-2005Cupra 1.8TVolkswagenBora (1998-2005)GolfMK4     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description 70mm I/D Rubber Neck Open Cone Air Filter - High flow construction and increased surface area Replaces the filter in the following kits - FMINDK5- Ford Fiesta 1.0 Ecoboost induction kit FMINDST180- Ford Fiesta ST180 induction kit FMINDASTG - Astra G induction kit *Please note - this filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.

Read more less

This actuator is suitable for the following K24 Turbo models: 2004-2007 Volvo S60R (Eng Code B5254T4) 2.5L AWD 300hp • 2004-2007 Volvo V70R (Eng Code B5254T4) 2.5L AWD 300hp • 2005-2007 Volvo S60 T5 ( Eng Code B5244T5) 2.4L FWD 260hp • 2005-2007 Volvo V70 T5 (Eng Code B5244T5) 2.4L FWD 260hp Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACS60R Actuator1 x Forge Sticker This actuator is built with a green coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This actuator is suitable for a number of engine installations in the 850,S60,S70,V70,C70 range. There are two variations of this actuator available, FMACT5S – with a straight connecting rod, and FMACT5B where the rod has an offset or bend. Please see the fitment lists below to determine which version should fit your vehicle: FMACT5S (Straight Rod) This is compatible with the models below, with the Bosch Motronic 4.3 / 4.4 ECU fitted as standard, as seen in models with an accelerator cable. The original actuator rod is straight and suitable for the Mitsubishi TD04HL straight flanged turbo. • 850 R 1997 - 1998 • 850 T-5 1997 - 1998 • 850 T5-R 1997 - 1998 • S70 T5 1997 – 1998 • V70 T5 1997 – 1998 • C70 T5 1997 - 1998 FMACT5B (Bent Rod) This is compatible with the models seen below with Bosch Motoronic 7 and Motronic 7S ECU fitted as standard, as seen in models without an accelerator cable (drive by wire / ETM). The original actuator rod is stepped and suitable for the Mitsubishi TD04HL angled flanged turbo type. • S70 1999 - 2000 • C70 (phase 1 and 2) 1999 - 2005 • V70 (phase 1 and 2) 1999 – 2004 • S60 (phase 2) 2000 – 2004 If you have a later K24 Turbo models (2004/2005/2006 and 2007) with 6 speed manual or automatic gearbox, please see Forge Motorsport part number FMACS60R. Please select the actuator rod, straight or bent, and colour of spring in the options above. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACT5 Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

PLEASE BE AWARE THIS IS NOT A REPLACEMENT PART FOR CARS THAT HAVE ELECTRONIC ACTUATORS. WE ADVISE YOU TO CHECK WHAT YOU HAVE BEFORE ORDERING THIS ITEM. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. FMACVAG09 Application List:Golf MK5 1.4 122 TSIGolf MK6 1.4 122 /125 TSILeon 1.4 122 / 125 TSIIbiza 1.4 122/125 TSIScirocco 1.4 122/125 1.4 TSIAudi A1 122/125 1.4 TSIAudi A3 122/125 1.4 TSIEos 1.4122 TSIFabia 1.4 122 TSIOctavia 1.4 122 TSIRoomster 1.4 122 TSISuperb 1.4 122 TSI In The Box:1 x FMACVAG09 Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Fully serviceable and tuneable replacement turbocharger actuator for the Ford Fiesta MK7.5 ST180. If you require this actuator to be assembled with a standard spring suitable for the factory boost level please select Green Stock Vehicle from the drop-down list. If you require a stronger spring please select the required spring in the drop-down menu.Green – Stock SpringPurple – 13 Psi (0.9 bar)Yellow – 15 Psi (1.03 bar)Blue – 18 Psi (1.24 bar)Red – 20 Psi (1.38 bar) Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACST180 Actuator1 x Forge Sticker This actuator is built with a green coded spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This actuator is designed for the Ford Focus RS or ST models Please note: There are two types of actuator available for this vehicle, either with a straight rod or a bent rod. The two versions are not interchangable. For this reason, prior to ordering you should ascertain which version you require. When ordering please identify your requirement in the options menu. The actuator is supplied with no replacement bracket ,you will need to reuse your original factory bracket to fit the Forge actuator. This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process.It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket. Please Note: The pressure figures listed in the drop down menu above are minimum regulated pressure figures. Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure.  In The Box:1 x FMACFRS Actuator1 x Forge Sticker

Read more less

Designed by Forge to replace the original component this uprated actuator is serviceable and guaranteed for life. It comes with an uprated diaphragm and a billet CNC machined aluminium mounting bracket. Fits EVO 4/5/6/7/8.This product is built with a predetermined actuator spring suitable for at, or slightly above factory boost levels. The actuator can be assembled with a stiffer spring upon request. Please contact us directly concerning this process It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket.Forge Motorsport nor any of it’s authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure.After requests for a very durable, fit and forget version of our actuators that would withstand the rigors of marine corrosion or simply would not tarnish, we have now added the option of ordering any of our piston design actuators with stainless steel bodies and external components/fixings. This option does incur a surcharge and will be shown when added to your basket. Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Please contact us by email if you require more information   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Designed by Forge to replace the original component on the Renault Megane 225/230 Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACMEG Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less