All
mtc MTC Motorsport - Audi Decat Downpipes 3” - Audi C7 (RS6 / RS7 / S6 / S7 / S8) (Copy)
MTC Motorsport Audi RS6 and RS7 2013+ Stainless Steel Decat Downpipes The RS6 downpipes are machined from SS304 aircraft-grade stainless steel and are tig welded in house Finished in brushed stainless The downpipes are made of 3" stainless pipe straight out of the turbo providing a sharper throttle response due to faster spool of the turbo This downpipe will provide noticeable power gains and a much more aggressive exhaust note which sounds truly amazing. Feedback from customers is that the downpipe crackles and bangs but is quiet on the motorway which is perfect. It produces lower temperatures and less exhaust backpressure due to the relief of the turbocharger. The cylinder charge is increased which contributes to maximum performance. There is also a substantial weight saving in comparison to the factory catalytic converter. The decat is mandrel-bent for better gas flow and maximum internal size to ensure ultimate performance without the loss of mid-range torque. We have tested this product and found increases of around 40-50bhp on test vehicles however, it does have the capability of increasing horsepower by 150-180bhp once your car has a stage 2 map. Will fit the following models perfectly: Audi RS6 2013-2019 Audi RS7 2013-2019 Audi S6 2013-2019 Audi S7 2013-2019 Audi S8 2013-2019 Professional installation is recommended as some exhausts sit slightly different from others and can be tight although the feedback we have received from this product is that it is very easy to fit. We recommend purchasing a Lambda Sensor Spacers to prevent the engine light coming on in most cases. If you search our other products you will find these. This product comes with a lifetime warranty.
£749.00
mtc MTC Motorsport - Audi Decat Downpipes and Mid Pipes - Audi C7 (RS6 / RS7 / S6 / S7 / S8)
MTC Motorsport Audi RS6 C7 and RS7 2013+ Stainless Steel Decat Downpipes with Mid Pipes This kit comes with the mid section that joins directly onto the standard exhaust. Please note, you will need to re-route the rear lambda sensor to fit these which is a very easy job. The RS6 downpipes and mid pipes are machined from SS304 aircraft-grade stainless steel and are tig welded in house Finished in brushed stainless They are made of 3" stainless pipe straight out of the turbo providing a sharper throttle response due to faster spool of the turbo This downpipe will provide noticeable power gains and a much more aggressive exhaust note which sounds truly amazing. Feedback from customers is that the downpipe crackles and bangs but is quiet on the motorway which is perfect. It produces lower temperatures and less exhaust backpressure due to the relief of the turbocharger. The cylinder charge is increased which contributes to maximum performance. There is also a substantial weight saving in comparison to the factory catalytic converter. The decat is mandrel-bent for better gas flow and maximum internal size to ensure ultimate performance without the loss of mid-range torque. No cutting required to fit We have tested this product and found increases of around 40-50bhp on test vehicles however, it does have the capability of increasing horsepower by 150-180bhp once your car has a stage 2 map. These pipes will fit the following models: Audi RS6 2013-2019 Audi RS7 2013-2019 Audi S6 2013-2019 Audi S7 2013-2019 Audi S8 2013-2019 Professional installation is recommended as some exhausts sit slightly different from others and can be tight although the feedback we have received from this product is that it is very easy to fit. We recommend purchasing a Lambda Sensor Spacers to prevent the engine light coming on in most cases (unless you are tuning the car). If you search our other products you will find these. This product comes with a lifetime warranty.
£849.00
mtc MTC Motorsport - Ford Fiesta 1L EcoBoost Full hose Kit - Different colours
Please note: As the 1.0 EcoBoost engine is present across multiple vehicles of car & van - the spacing on hoses can differ! As such the smallest of the 3 hoses is made for the biggest spacing necessary and on some models may require 0.5-1 inch trimming off each end prior to install This kit does not fit the Focus - and will only fit on MK8 fiestas with a front turbo! Full hose kit for the 1L EcoBoost Fiesta Kit includes -Primary Induction Hose -Alloy crossover Pipe -Secondary Hose -Turbo Hard Pipe -Intercooler Hoses RRP £355, your price £300 Please Note: the oil breather hose requires trimming to fit inside the secondary hose. Intercoolers and induction kits also available to finish off the bay
£492.83
mtc MTC Motorsport 1L EcoBoost Cross Over Pipe
Please note: fits FIESTA ONLY - Focus you will need a different design, please inform our support team or add a note to order advising this is for a FOCUS so we can send the revised bracket! Thanks to our ongoing partnership with MTC Motorsport, CEUK are once again able to offer the 1L ecoboost owners some of the finest engine modifications at the cheapest prices! In addition to the Turbo Hard Pipe, we not bring you the Alloy Crossover Pipe! Flawless in design and expertly welded this is a real contender with the big brands also stocked at CEUK. Made from Alloy, with a larger bore to increase airflow from the induction kit to the turbo this is a must have for any body wanting to have a serious go at making their 1.0 a Pocket Rocket! Please note: As this is a new release, discount codes do not apply.
£120.00
mtc MTC Motorsport Fiesta Mk7 Spoiler Risers
MTC Motorsport Fiesta Mk7 and 7.5 Wing Riser Kit. These are machined aluminium blocks designed to raise the rear spoiler on the MK7 and MK7.5 Fiesta ST180 and 1.0L Ecoboost They are made from a high grade billet aluminium on the best CNC machines in the business. When they have been machined and all the holes have been tapped they are anodised in gloss black to stop corrosion. The wing riser kit is for anyone who is looking to give their fiesta a more aggressive look with the spoiler sitting at more of an angle. The lift of the rear wing also helps to keep the back window clean as it directs the air down and across the face of the glass. They look great when installed and very easy to do. It is advisable to use Threadlock on the bolts, and ensure these are tightened securely! Please note: General discount codes can not be applied to this item, Unless otherwise Advised!
£50.00