All

Upgrade the exterior styling on your VW MK7.5 GTI with our ECS Tuning In-House designed and engineered Carbon Fiber Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Carbon Fiber Diffuser!    PART DESIGN Made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured then clear coated for UV resistance. Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.   KIT CONTENTS Carbon Fiber Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7.5 GTI Carbon Fiber Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

Read more less

Raise the level of style on your Volkswagen MK7.5 GTI with the ECS Tuning Carbon Fiber Fog Light Trim and Front Bumper Grille Flare Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required.  These were designed to provide your VW with a more aggressive look by accentuating the area around the fog grilles, providing bold, aggressive styling.  An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Bumper Flares and Foglight Trim Overlays are made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Carbon Fiber Bumper Flares amplify the shape of the OEM fog light surround trim for aggressive styling  Carbon Fiber Fog Light Trim Overlays add a touch of premium carbon fiber to the factory fog light trim Both parts apply directly to the front-end using the pre-applied heavy duty 3M adhesive tape to accentuate the area around the fog lights and fog light trim Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Research and Development Team.   KIT CONTENTS This is for QTY 1 set of front Bumper Grille Flares (1 left and 1 right) and QTY 1 set of front Foglight Trim Overlays (Left and Right side, upper and lower- 4 pieces). **All other products are shown for reference and are available separately. Please reference green-highlighted image showing the parts that are included.**     PRODUCT DEVELOPMENT Our ECS Carbon Fiber Bumper Flares and Foglight Trim Overlays were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing. Showcased on our ECS Tuning 2019 SEMA RallyWagen "2.0" South America VW GTI    INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the parts directly to the front bumper trim using the pre-applied adhesive tape. 

Read more less

Raise the level of style on your Volkswagen MK7 Golf R with the ECS Tuning Carbon Fiber Front Bumper Grille Flares. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required.  These were designed to provide the vehicle with a more aggressive look by accentuating the area around the inlet grilles, providing a bold, aggressive styling similar to that of the VW R400 Concept Car. An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Front Bumper Grille Flare Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the outer bumper grilles, providing a similar, aggressive look to the R400 concept car Grille Flares extend around the inside of the inlet grille to cover any exposed paint Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Engineering Team.    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Bumper Grille Flare Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape.   ** All other products shown in installed photography are NOT included... This kit is for QTY 2 front bumper flares ONLY!  ** *2 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Raise the level of style on your Volkswagen MK7 GTI with the ECS Tuning Carbon Fiber Front Bumper Grille Flares. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required.  These were designed to provide the vehicle with a more aggressive look by accentuating the area around the inlet grilles, providing a bold, aggressive styling similar to that of the VW R400 Concept Car. An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Front Bumper Grille Flare Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the fog lights, providing a similar, aggressive look to the R400 concept car Grille Flares extend around the inside of the inlet grille to cover any exposed paint Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Engineering Team.    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Bumper Grille Flare Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape.   **PLEASE NOTE: These are NOT compatible with Park Distance Control (parking sensors) as they directly interfere with the PDC sensors. ** ** Our ECS Tuning Front Lip Spoiler (ES3525095) shown is NOT included but is available separately. ** *4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation.*

Read more less

Raise the level of style on your VW MK7 GTI with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Carbon Fiber mounting brackets bolt to the existing lower valance mounting locations with supplied hardware, with an optional well nut insert and machine screw to secure the front center bumper support.   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware make for an easy, non-permanent installation that provides a confident, secure fitment. Center post mounting hole location is optional. Drilling is only required for the center mounting post.   *4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation.*

Read more less

Raise the level of style on your VW MK7 Golf R with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Includes OE-Grade T25 torx self tapping screws for durable installation   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing, including numerous high-speed runs!    INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware makes for an easy, non-permanent installation that provides a confident, secure fitment. Reference our Installation Guide for proper prep. and installation procedures.  *4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Raise the level of style on your VW MK7.5 GTI with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Mounts to existing lower valance mounting locations using heavy duty carbon fiber mounting brackets with supplied hardware Includes OE-Grade T25 torx self tapping screws for durable installation   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing, including numerous high-speed runs!    INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware makes for an easy, non-permanent installation that provides a confident, secure fitment. Reference our Installation Guide for proper prep. and installation procedures.   *4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Raise the level of style on your VW MK7.5 Golf R with our ECS Tuning Carbon Fiber Front Lip Spoiler. Designed and engineered in-house to fit directly on your factory front bumper, our lip will provide a much more aggressive visual appeal and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads.    PART DESIGN The ECS Tuning Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Mimics the lower section of the bumper & grille lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Includes pre-applied high strength adhesive tape Mounts to existing lower valance mounting locations using heavy duty carbon fiber mounting brackets with supplied hardware An optional well nut insert and machine screw secures the front center of the bumper. Requires drilling into the bumper cover for use.  Includes OE-Grade T25 torx self tapping screws for durable installation   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Lip Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing, including numerous high-speed runs!    INSTALLATION AND SUPPORT Pre-appplied high strength tape along with the included mounting hardware makes for an easy, non-permanent installation that provides a confident, secure fitment. Reference our Installation Guide for proper prep. and installation procedures. The optional well-nut and bolt require drilling into the center of the bumper. Simply position the front lip to the center of the bumper, mark, drill and install the well-nut for a secure fitment.   *4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Raise the level of style on your Volkswagen MK7.5 Golf R with the ECS Tuning Carbon Fiber Front Bumper Grille Flares and Bumper Trim "Tee" Overlays. This quality addition was engineered and designed in-house to fit directly to your factory front bumper, with no modifications required.  These were designed to provide your VW with a more aggressive look by accentuating the area around and inside the outer bumper grilles, providing bold, aggressive styling.  An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Outer Bumper Grille Inlet Duct Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Amplifies the shape of the OEM outer grille trim for aggressive styling  Outer Grille Trim "Tee" Overlays are designed to work cohesively in conjunction with the ECS Bumper Flares for further styling improvements  Applies directly to the front outer grille trim using the pre-applied heavy duty 3M adhesive tape to accentuate the area around the bumper grilles  Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Research and Development Team.   KIT CONTENTS This is for QTY 1 set of front, outer Bumper Grille Flares and QTY 1 set of front, inner Bumper Grille "Tee" Overlays (left and right). **All other products are shown for reference and are available separately. Please reference product images showing the parts that are included.**     PRODUCT DEVELOPMENT Our ECS Carbon Fiber Outer Bumper Grille Inlet Duct Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the carbon fiber components directly to the front bumper cover grille trim using the pre-applied adhesive tape. See our Installation Tips under the "Installation" tab for more detail. 

Read more less

Raise the level of style on your Volkswagen MK7.5 GTI or MK7.5 Golf R with the ECS Tuning Carbon Fiber Rear Bumper Flares. This quality addition was engineered and designed in-house to fit directly to your factory rear bumper cover, with no modifications required and are 100% compatible with P.D.C. sensors.  These were designed to provide the vehicle with a more aggressive look by accentuating the area around the bumper corners and reflector housings, providing a bold, aggressive styling similar to that of the VW R400 Concept Car. An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Rear Bumper Flare Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the rear bumper cover using the pre-applied adhesive tape to accentuate the area around the fog lights, providing a similar, aggressive look to the R400 concept car Dramatically improves the appearance of the rear end and adds a wide, aggressive stance from rear and side of vehicle Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Engineering Team    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Rear Bumper Flare Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area with an alcohol wipe or similar cleaner, and apply the Flares directly to the rear bumper cover using the pre-applied adhesive tape.     ** All other products shown in installed photography are NOT included... This kit is for QTY 2 rear bumper flares ONLY!  ** *2 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Upgrade the exterior styling on your VW MK7 Golf R with our ECS Tuning In-House designed and engineered Carbon Fiber Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Carbon Fiber Diffuser!    PART DESIGN Made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured then clear coated for UV resistance. Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Additional, unique design feature extends the flaring lines of the OEM rear bumper cover to transition into our diffuser  Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" quad, round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal. Please note: May not be compatible with larger, aftermarket oval tips.  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.   KIT CONTENTS Carbon Fiber Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - OE-type self-tapping torx screws   PRODUCT DEVELOPMENT Our ECS MK7 Golf R Carbon Fiber Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts in detail! See our Installation PDF under the INSTALLATION Tab for more information. *1 sterile antiseptic alcohol wipe (ES2918127) is suggested for proper installation.*

Read more less

Upgrade the exterior styling on your VW MK7 GTI with our ECS Tuning In-House designed and engineered Carbon Fiber Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Carbon Fiber Diffuser!    PART DESIGN Made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured then clear coated for UV resistance. Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" exhaust tips; compatible with OEM exhaust, although, we recommend large exhaust tips for visual appeal  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.   KIT CONTENTS Carbon Fiber Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7 GTI Carbon Fiber Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Use the provided installation brackets to mount the center of the diffuser to the OEM lower valance brackets. The outer hardware nuts/bolts secure the outboard fins to the bumper cover. Ensure all the clips are fully engaged before tightening hardware.  *4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation.*

Read more less

Upgrade the exterior styling on your VW MK7 Golf R with our ECS Tuning Gloss Black Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Gloss Black Diffuser!    PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment.  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Additional, unique design feature extends the flaring lines of the OEM rear bumper cover to transition into our diffuser  Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" quad, round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal. Please note: May not be compatible with larger, aftermarket oval tips.  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.​ Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer   KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - OE-type self-tapping torx screws   PRODUCT DEVELOPMENT Our ECS MK7 Golf R Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM valance in detail! See our Installation PDF under the INSTALLATION Tab for more information.   *1 sterile antiseptic alcohol wipe (ES2918127) is suggested for proper installation.*

Read more less

Upgrade the exterior styling on your 2018+ Volkswagen MK7.5 Golf R with our ECS Tuning Gloss Black Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Gloss Black Diffuser!    PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Houses 4.0" round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Please note, our diffuser is not compatible with some larger aftermarket oval exhaust tips Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser. Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer   KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7.5 Golf R Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM valance in detail! See our Installation PDF under the INSTALLATION Tab for more information.

Read more less

ECS Tuning Gloss Black Rear Diffuser - Mk7 Golf GTI Upgrade the exterior styling on your 2013 - 2017 Volkswagen MK7 GTI with our ECS Tuning Gloss Black Rear Diffuser.An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads!Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with the ECS Gloss Black Diffuser!  PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Houses 4.0" exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser. Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side) PRODUCT DEVELOPMENT The ECS MK7 GTI Rear Diffuser was designed, engineered, tested and quality inspected by ECS's own Research and Development team in their Wadsworth, Ohio facility. ECS strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

Read more less

The ECS Tuning Rear Diffuser Add-On Kit easily installs over the factory rear valance on your 2018+ Volkswagen GTI to provide the appearance of an aggressive diffuser, without the need to remove your OEM valance. Engineered in-house, our rear diffuser overlay will be sure to catch attention and turn heads! Featuring more aggressive outer blades and three new center blades to fill the massive void in the factory valance. Installs easily with our sleek mounting brackets and included hardware.    PART DESIGN Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Overlays the factory valance to provide aggressive rear diffuser styling  Outer blades are designed around the OE blade surfaces and made more aggressive by lengthening and tapering the blade towards the bottom Center blades fill the empty cavity of the OE valance and feature countered upper mating surfaces to the OE valance for a seamless fit The bottom of the valance has provisions for mounting to the OE body brackets Sheet metal brackets are used to mount to the bottom of the OE diffuser using stainless steel hardware and rubber insulated well nuts Textured matte black finish resembles the OE valance texture for OE+ appearance  Manufactured from ABS vacuum formed plastic with UV additives to stand up to the abuse from the elements   KIT CONTENTS Rear Valance Overlay  Rear Valance Mounting Brackets (4) Side Blade Self Tapping Screws (2) Upper Mounting Rubber Insulated Well Nuts (4) Black Oxide Stainless Button Head Screws (6) Black Phosphate Barrel Nut Clips (2)     PRODUCT DEVELOPMENT Our ECS Rear Diffuser Add-On Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing   INSTALLATION AND SUPPORT Need installation tips? We put together a full installation tutorial from start to finish. See our Installation PDF under the INSTALLATION Tab for more information. 

Read more less

Focus Mk2 Wing Riser Kit. (25mm) Give your ride that aggressive look you always wanted. Designed for you in mind, keeping costs to a minimum whilst having a product thats durable and works. Black Metal Anodized Spacers that will raise the spoiler for the Focus Zetec, Zetec S and ST Mk2. All Kits come with Stainless Steel hardware to ensure that components will never fail. Simple and easy installation.  

Read more less

Focus Mk3 Wing Riser Kit - Now Made from Solid Aluminium! Give your ride that aggressive look you always wanted. Designed for you in mind, keeping costs to a minimum whilst having a product thats durable and works. Black Spacers that will raise the spoiler for the Focus Zetec, Zetec S and ST Mk3. All Kits come with Stainless Steel hardware to ensure that components will never fail. Simple and easy installation.

Read more less

After the massive success of the Ford Focus MK3 Wing Riser Kit, We have now brought you the most affordable wing riser kit available for all variants of the Mk7 Fiesta. This new and improved riser kit has been made for you, rising above the competition, no more huge gaps between your spoiler and boot whilst staying in line with the roof giving you that perfect aggressive look you’re after! Perfectly crafted and produced now from Metal, they have been made to withstand high forces whilst on the road whilst clearing dirt and rain of the rear window by diverting air across the rear window. Full stainless steel Hardware as standard throughout on all our products with detailed instructions to make your life simple that are available to download. As they are now made from Metal, they are only available in Black! We do however have some clearance of the old coloured 3D printed available, These are currently reduced. Protected by UK Copyright Law: Ref 6122259

Read more less

After the massive success of the Ford Focus MK3 Wing Riser Kit and the MK7 Wing Riser Kit, We have now brought you the most affordable wing riser kit available for all variants of the Mk8 Fiesta. This new and improved riser kit has been made for you, rising above the competition, no more huge gaps between your spoiler and boot whilst staying in line with the roof giving you that perfect aggressive look you’re after! Perfectly crafted and produced now from Metal, they have been made to withstand high forces whilst on the road whilst clearing dirt and rain of the rear window by diverting air across the rear window. Full stainless steel Hardware as standard throughout on all our products with detailed instructions to make your life simple that are available to download. As they are now made from Metal, they are only available in Black! We do however have some clearance of the old coloured 3D printed available, These are currently reduced.  

Read more less

FORD FIESTA MK8/MK8.5 REAR WINDOW PANEL COVERS Covers the existing matt / grey textured side piece on the rear windscreen - available as a plain flat cover  This product will fit every model of MK8 and MK8.5 Fiesta - 2017-2024 COMPLETE SET INCLUDES: 1x Pair Rear Window Panel Covers 1x Installation Video 2x VHB Surface Cleaners MATERIALS & FINISH: ABS Plastic Gloss Black 3M Adhesive Tape Please note: PARTS ARE NOT 3D PRINTED. All parts come with a protective film sealed around the product to avoid any damages. Please remove the film.   Protected By UK Design Right - Reference: 6230937  

Read more less

Front fog surround - add a bit of style to your existing fog surround! These secure with Strong 3M VHB tape over your existing fog surround, to give extra Aesthetics FRONT SURROUND FORD FIESTA MK8 ST/ST-LINE 2017+ COMPLETE SET INCLUDES: 1x Pair Surrounds (Left & Right)  Pre Applied 3M VHB Tape 1x Installation Video 2x VHB Surface Cleaners MATERIALS & FINISH: ABS Plastic Gloss Black 3M Adhesive Tape Please note: PARTS ARE NOT 3D PRINTED. All parts come with a protective film sealed around the product to avoid any damages. Please remove the film LTD Run of "Carbon Look" Now available View our installation Video here! This product is protected under Registered UK Design Rights - Reference: 6295954

Read more less

  Front fog surround for a MK8.5 Fiesta with the ST / ST LINE Style fog (or lack thereof) surround Add some style with this 4 Fin flared addon! In the kit 1x Pair fog surrounds (L&R) 1x Installation Video 2x Alcohol Wipes MATERIALS: ABS Plastic & 3M VHB Tape Finish: Gloss Black (Prototype was white for image purposes) Supplied with a protective film to avoid damage in transit and everything required for a simple 5 minute install  This product is protected under registered design rights as a Registered Design - Reference: 6241111

Read more less

  Front Splitter V.1 Audi S3 Sportback / A3 S-Line Sportback 8Y Facelift FITS ONLY:Audi S3 Sportback 8Y Facelift 2024 -Audi A3 S-Line Sportback 8Y Facelift 2024 - COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less