All
PrintPeel&Stick PrintPeel&Stick - MK8 Fiesta eyeliner Single Eye Liner (1 Part Per Side)
By PrintPeel&Stick for CEUK FITS PRE FACELIFT MK8 ONLY Eyeliner fits around the bottom & front edge of the headlights Available in two styles: Single (1 part per side) Split (2 parts per side)
£24.00
PrintPeel&Stick PrintPeel&Stick - MK8 Fiesta eyeliner Single Eye Liner (2 Part Per Side)
By PrintPeel&Stick for CEUK FITS PRE FACELIFT MK8 ONLY Eyeliner fits around the bottom & front edge of the headlights Available in two styles: Single (1 part per side) Split (2 parts per side)
£24.00
PrintPeel&Stick PrintPeel&Stick - Mk8 Fiesta Front Wing Vinyls Decal (Pair) - Style 1 (Full Width)
A pair of wing vinyls to fit the Mk8 Fiesta. Prices start from £25 for a pair of plain strips. Add our logo! If purchasing with logos cut out, please remember to message us with your logo requirements after ordering. Please leave the details in the "notes" section at checkout Click here to see our colour guide Please note: most PP&S badges / decals are made to order - Once shipped it will be via tracked24 however please allow 3-5 days for these to be made prior to dispatch *** Please note that it is advised that these are fitted by a competent person / professional installer as some heat and slight stretching is required when folding under the wheel arch. Refunds will not be issued for errors in fitment. *** Please add a note to your order at checkout with your 3 selected Logo's: NO LOGOS! CEUK FORD PERFORMANCE EIBACH MAXTON DESIGN REVO SCORPION VUDU
£36.00
PrintPeel&Stick PrintPeel&Stick - Mk8 Fiesta Lower Side Stripe Decal Set
PLEASE LEAVE A NOTE TO INFORM US ON THE INFORMATION REQUIRED FROM BELOW! Number Of Doors: 3 Door 5 Door Logo Cut Out Options: No Logo , ST, ST Line, CEUK Pickup available at PrintPeel&Stick, Unit A7 Seedbed Centre, Usually ready in 5+ days Mk8 Fiesta Lower Side Stripe. This side stripe follows the lower fold line of the doors and body Available plain or with a logo cut into the stripe to reveal the body colour underneath Fits all models of the Mk8 Fiesta (excluding active) Cut to shape ready for install Fits Mk8 Fiesta (3 or 5 door)
£48.00
PrintPeel&Stick PrintPeel&Stick - Mk8 Fiesta ST & ST Line Inner Front Quarter Vinyl Decal Set
By PrintPeel&Stick for CEUK Cut to shape ready for install. Fits Mk8 Fiesta ST or ST Line (3 or 5 door) Inner Decals fit on the plastic fog light trim. Consists of 4 parts (2 each side) Many colours avaliable Other colours available for special order (additional charges may apply). Please contact us for more info.
£24.00
PrintPeel&Stick PrintPeel&Stick - Mk8 Fiesta ST & ST Line Outer Front Quarter Vinyl Decal Set
By PrintPeel&Stick for CEUK Cut to shape ready for install. Fits Mk8 Fiesta ST or ST Line (3 or 5 door) Outer Decals fit on the bumper above the plastic fog light trim. Consists of 2 parts (1 each side) Orders posted within 48 hours of payment. Many colours avaliable
£18.00
PrintPeel&Stick PrintPeel&Stick - Mk8 Fiesta ST EDITION Airbag Light Cover Gel Badge
Designed to cover over the airbag light on the center of the dash Exclusively designed for the ST EDITION model of the Mk8 Fiesta Comes with generic "1 of 300".
£8.40
PrintPeel&Stick PrintPeel&Stick - Mk8 Fiesta Union Jack Window Vinyl Decal - FRONT ONLY
By PrintPeel&Stick for CEUK Union Jack window vinyls. Fits 3 & 5 door ModelsThe glass etched colour choices are highly recommended. The semi-transparrant material really sparkles! See photos of the small 3 door front windows for an example. Please note that the colour / shade of the sparkle glass etching will vary massively depending on the tint level of the glass. The darker the tint, the darker the finish of the sparkle effect material will beMany other colour choices are also available. If the colour is not shown here, please contact us with your requirements and we will do our best to accomodate for you!
£14.40
PrintPeel&Stick PrintPeel&Stick - Mk8 Fiesta Union Jack Window Vinyl Decal - REAR ONLY
By PrintPeel&Stick for CEUK Union Jack window vinyls. Fits 3 & 5 door ModelsThe glass etched colour choices are highly recommended. The semi-transparrant material really sparkles! See photos of the small 3 door front windows for an example. Please note that the colour / shade of the sparkle glass etching will vary massively depending on the tint level of the glass. The darker the tint, the darker the finish of the sparkle effect material will beMany other colour choices are also available. If the colour is not shown here, please contact us with your requirements and we will do our best to accomodate for you! for these colour options please leave a note on your order at check out to pick these colours! Black Glitter Red Glitter Blue Glitter Dark Blue Glitter Pink Glitter Violet Glitter Flourescent Yellow Flourescent Orange Flourescent Green Flourescent Pink Carbon
£14.40 - £20.40
PrintPeel&Stick PrintPeel&Stick - Mk8 Gear shift gator surround gel set
Add some colour to the interior of your Mk8 Fiesta with this gear shift gator gel cover! 1 x Gel to cover the two chrome strip around the gear shift gator surround Set only comes as one single colour. Mix & Match not available on this product Please note that extra care should be taken when handling this product as the item could become easily stretched out of shape if pulled too heavily Please note: most PP&S badges / decals are made to order - Once shipped it will be via tracked24 however please allow 3-5 days for these to be made prior to dispatch Please note that there is an addtional 2 days lead time for gel products
£10.80
PrintPeel&Stick PrintPeel&Stick - Mk8.5 (Face Lift) Fiesta ST & ST Line Inner Front Quarter Vinyl Decal Set
Cut to shape ready for install Fits Mk8.5 Fiesta ST or ST Line This does not fit the mk8 pre-facelift Inner Decals fit on the plastic fog light trim Consists of 4 parts (2 each side)
£28.80
PrintPeel&Stick PrintPeel&Stick - Mk8.5 (Face Lift) Fiesta ST & ST Line Outer Front Quarter Vinyl Decal Set
Cut to shape ready for install Fits Mk8 Fiesta ST or ST Line This does not fit the mk8 pre-facelift Outer Decals fit on the bumper above the plastic fog light trim Consists of 2 parts (1 each side) Pink inner parts shown in these photos are NOT included with this product PLEASE BE AWARE THIS IS FOR THE STICKER SHOWN IN GREY VINYL SHOWN IN THE IMAGES! THE PINK STICKER IS SOLD SEPERATELY AS A PAIR! LINKED BELOW: CLICK HERE TO VIEW THE VINLY DECAL SHOWN IN PINK!
£18.00
PrintPeel&Stick PrintPeel&Stick - OEM Steering Wheel ST Gel Insert
Designed to fit in the latest flat bottomed Ford OEM steering wheel Will not fit aftermarket steering wheels or other covers Many colours available
£3.60
PrintPeel&Stick PrintPeel&Stick - PPS - 20mm Door Lock Gel Cover
PLEASE CHECK YOUR KEY HOLE SECTION IS 20MM BEFORE ORDERING! 20mm gel badge which will cover the driver door key hole Fits the following models (may also fit others, please measure first): Fiesta Mk7 / 7.5 Focus Mk3 & 3.5
£3.00
PrintPeel&Stick PrintPeel&Stick - PPS - 20mm Ignition Button Gel Badge
20mm Gel Start button Comes with black background and a selection of logos in various colour options Please note that colour options for "Revo" logo will only change the letter "O", keeping a standard white colour for the "Rev" part Fits Mk7 & 7.5 Fiesta & Mk3 & 3.5 Focus. This will also fit other fords that use this same type of 20mm start button
£2.40
PrintPeel&Stick PrintPeel&Stick - Puma Mk2 Climate Control Carbon Gel Cover
Carbon Fibre effect vinyl gel designed to cover over the complete climate control panel of the Mk2 Puma Please note that extra care should be taken when handling this product as the item could become stretched out of shape if pulled too heavily All PPS items are made to order and may carry a lead time of 5-7 working days
£18.00
PrintPeel&Stick PrintPeel&Stick - PUMA MK2 UPPER MIDDLE BRAKE LIGHT GEL OVERLAY
Fits perfectly over the top of the middle brake light Extremely simple to fit. Simply clean the surface, peel & stick! 2 minute job! Range of logo's to select from Please contact us for custom logo's / text! Fits all models of the Focus MK4
£14.40
PrintPeel&Stick PrintPeel&Stick - ST Badge Gel Inlays - Fiesta Mk7.5 & 8 / Focus Mk3, 3.5 & 4 / 2020 Puma
NOW AVAILABLE IN A MASSIVE RANGE OF COLOURS, GRADIENTS AND COUNTRY FLAGS! Designed to fit inside the OEM ST Badges (Front & Rear) See below for full model fitment Available as a set (Front & Rear) or individually Model Fitment Fiesta - MK7.5 & MK8 Focus - MK3, MK3.5 & MK4 2020 Puma ST Please add a note to your order at checkout to identify what colour option you would like! BlackWhitePrimrose YellowLight Primrose YellowOrangeLight OrangeRedDark RedWine RedPinkMagentaTelemagentaVioletCadbury PurplePacific BlueDelft BlueMarine BlueBrilliant BlueGentian BlueLight BlueSky BlueTurquoisePetrolMintGreen YellowLimeGrass GreenGreenEmerald GreenLight GreyGreyDark GreyKomatsu GreyCopperGoldSilverMetallic AnthraciteMetallic Light BlueMetallic RedMetallic PurpleSilver SpectrumBlack SpectrumCopper SpectrumRose Gold SpectrumRed SpectrumAmethyst SpectrumRed SpectrumAmethyst SpectrumGloss CarbonBlack GlitterBlue GlitterDark Blue GlitterRed GlitterPink GlitterViolet GlitterFlourescent YellowFlourescent OrangeFlourescent PinkFlourescent GreenChequered Flag (Black and white)Martini Racing StripesUnion JackUnion Jack (Monochrome)England FlatScottish FlagWales FlagGerman FlagFrance FlagItaly FlapPoland FlagBelgium FlagSweden FlagAustria FlagDenmark FlagFinland FlagNorway FlagRepublic Of Ireland FlagLGBTQ FlagBlack to Sky BlueBlack to RedBlack to Grass Green (Ford Mean Green)Sky Blue to Marine BlueRed to OrangeRed to Marine BlueMagenta to Sky BlueLime to YellowLight Grey to Violet
£5.00 - £10.00
PrintPeel&Stick PrintPeel&Stick - ST EDITION Boot Lid Gel Badge
Boot Lid Gel Exclusively for the "ST EDITION" range of Ford models. Currently available on the Mk8 Fiesta & Mk4 Focus Black Background with Sky Blue logo Comes with generic "1 of 300". We can provide with a specific number upon request free of charge. Please leave a note at the checkout if you would like this. Example below: #34 of 300 Size: 90 x 12mm
£6.00
PrintPeel&Stick PrintPeel&Stick - ST Edition Gel Inlay / Insert
Exclusively designed for the ST EDITION models currently available on the Mk8 Fiesta & Mk4 Focus Designed to fit inside the OEM ST Badges (Front & Rear) Black to Sky Blue gradient background with black "EDITION" logo inside
£12.00
PrintPeel&Stick PrintPeel&Stick - ST Line Badge Gel Inlays - GEL INSERT ONLY (Singles)
Gel inserts to fit the metal ST Line Badges only Gel insert fits the ST part of the badge This will not fit any other badge type ST Line Badges not included Sold as singles
£6.00
PrintPeel&Stick PrintPeel&Stick - Steering Wheel Controls Gel Overlay Set (Fiesta MK8 / Puma MK2 / Focus MK4)
Add some colour to the interior of your car with these coloured gel cover strips! 2 x Gel strips to cover the two chrome strips on the steering wheel controls Please note that a small part of the chrome will still be visible where they fold inwards Set only comes as one single colour. Mix & Match not available on this product Fits the following: Mk8 Fiesta Mk4 Focus 2020 Puma This will also fit other new generation fords that use this same type of steering wheel. Please check before purchasing Please note that extra care should be taken when handling this product as the item could become easily stretched out of shape if pulled too heavily Please note that there is an addtional 2 days lead time for gel products Please note: most PP&S badges / decals are made to order - Once shipped it will be via tracked24 however please allow 3-5 days for these to be made prior to dispatch
£6.60
PrintPeel&Stick PrintPeel&Stick - Sync 3 Carbon Gel Cover
Carbon Fiber effect vinyl gel designed to cover over the complete Sync 3 control panel Fits the following: Mk8 Fiesta 2020 Puma Will fit other vehicles using the same sync platform (must look exactly the same as the images) Please note that extra care should be taken when handling this product as the item could become stretched out of shape if pulled too heavily This product design is protected by the Intellectual Property Office. Registration no: 6087223
£20.40
PrintPeel&Stick PrintPeel&Stick - ULTRA Deep Sun Strip - Mk4 Focus Only
Ultra deep sun strip for the Mk4 Focus, available in a choice of colours Designed for people wanting the deepest possible sun strip; finishes just below the bottom circle sensor Made specifically for the Mk4 Focus with cut outs to avoid covering the sensors in the screen Edges are trimmed off after fitting for a perfect fit and finish No Text is included It is advisable to have the sun strip fitted by a professional, but we do a fitting guide - Any damage to the strip, or car, caused by poor application can not be covered by PrintPeel&Stick
£16.00