All

Pickup available at PrintPeel&Stick, Unit A7 Seedbed Centre, Usually ready in 5+ days New extended version that flows round to the edges of the boot lid Cut to shape ready for install Fits all Mk8 Fiesta's

Read more less

By PrintPeel&Stick for CEUK Cut to shape ready for install. Fits all Mk8 Fiestas. Please note that the centre of this decal is cut out to fit around the foam panel behind the number plate. Please note the two end parts of the foam panel may need to be removed to allow this to fit If ordering a short number plate version, please leave note stating the length of your numberplate Many colours avaliable Other colours available for special order (additional charges may apply). Please contact us for more info.

Read more less

By PrintPeel&Stick for CEUK Cut to shape ready for install. Fits Mk8 Fiesta ST or ST Line (3 or 5 door) Consists of 4 parts (2 each side) Many colours avaliable Other colours available for special order (additional charges may apply). Please contact us for more info. For these colour options please leave a note on your order: Black Glitter Red Glitter Blue Glitter Dark Blue Glitter Pink Glitter Violet Glitter Flourescent Yellow Flourescent Orange Flourescent Green Flourescent Pink Carbon

Read more less

Fits perfectly over the top of the middle brake light Extremely simple to fit. Simply clean the surface, peel & stick! 2 minute job! Range of logo's to select from Please contact us for custom logo's / text! Fits all models of the Fiesta Mk8

Read more less

By PrintPeel&Stick for CEUK Mk8 Fiesta Upper Side Stripe. This side stripe follows the upper fold line of the doors and body, cutting through the door handle(s) Available plain or with various Logo's / text cut into the stripe to reveal the body colour underneath. For additional colour options please leave a note on your order with one of the bellow option: Black Glitter Red Glitter Blue Glitter Dark Blue Glitter Pink Glitter Violet Glitter Flourescent Yellow Flourescent Orange Flourescent Green Flourescent Pink Carbon

Read more less

Rear Quarter decal set for mk2.5 Focus RS (may fit other models with same bumper design) Comes in 4 parts (2 pieces per side) Available in Many colours

Read more less

Add some colour to the interior of your Mk3 Focus with these coloured gel cover strips! Fits both Mk3 Pre Facelift & Mk3.5 Facelift 4 x Gel strips to cover the chrome strips on the air vent direction handles Set only comes as one single colour. Mix & Match not available on this product The gel between the door lock and hazard light switch is not included. This is available to purchase separately Please note that extra care should be taken when handling this product as the item All PPS items are made to order and may carry a lead time of 5-7 working days

Read more less

Cut to shape ready for install Fits all Mk3 & 3.5 Focus The top tucks under the boot handle / trim for a seamless fit Professional fitting advised All PPS items are made to order and may carry a lead time of 5-7 working days

Read more less

Single gel strip designed to cover the chrome strip between the door lock and hazard light switch This is only available on the mk3 focus, not the mk3.5 Many colours available Gel strips on the air vents as seen in the photos are not included. These are available to purchase separately Please note that extra care should be taken when handling this product as the item All PPS items are made to order and may carry a lead time of 5-7 working days

Read more less

Fits perfectly over the top of the middle brake light Extremely simple to fit. Simply clean the surface, peel & stick! 2 minute job! Range of logo's to select from Please contact us for custom logo's / text! Fits all models of the Fiesta Mk7

Read more less

NOW AVAILABLE IN A MASSIVE RANGE OF COLOURS, GRADIENTS AND COUNTRY FLAGS! Designed to fit inside the OEM RS Mk3 Focus RS Spoiler Will NOT fit the front and rear badges Sold as a pair (one for each side of the spoiler) Please contact us for custom colours / designs

Read more less

Add some colour to the interior of your Mk4 Focus with these coloured gel cover strips! Please note that these will NOT wrap around the handle so each sides chrome will still be visible 4 x Gel strips to cover the two chrome strips on the air vent direction handles Set only comes as one single colour. Mix & Match not available on this product Please note that extra care should be taken when handling this product as the item could become easily stretched out of shape if pulled too heavily

Read more less

Fits perfectly over the top of the middle brake light Extremely simple to fit. Simply clean the surface, peel & stick! 2 minute job! Range of logo's to select from Please contact us for custom logo's / text! Fits all models of the Focus MK4 

Read more less

Fits over the existing ford badge on the key shown in the photos. May also fit over other keys with the same size badge Many logos & colours available Although an ultra sticky vinyl is used, care should be taken once applied. Avoid catching on edges etc. To fit, press and hold down for a minute or so, ensuring edges are pushed down. Leave for an hour or so to adhere properly (ideally overnight)

Read more less

Ford Performance OEM Splitter Gel Insert Set (Splitter not included) Fits the latest generation ST models with the splitter shown in the images Available in various colour options Fits inside the Ford Performance recess. These will be printed and cut on our ultra high-tack adhesive vinyl for a strong bond to the splitter. Please unsure the recess is fully cleaned, dry and free from greasy residue (like quick detailer). Please fit in temperatures above 10 °C (or heat the area up with a heat gun / hair dryer before applying) Please take care when fitting, not to stretch the gel badges

Read more less

Gel insert to fit inside the lower carbon steering wheel cover Fits the following: Mk8 Fiesta Mk4 Focus 2020 Puma Many colours available to match our other interior gels and decals These have been designed to fit on the following product from Ali Express Please note this will NOT fit the OEM steering wheel, only the aftermarket carbon covers

Read more less

Gel insert to fit inside the lower carbon steering wheel cover Fits the following: Mk8 Fiesta Mk4 Focus 2020 Puma Many colours available to match our other interior gels and decals These have been designed to fit on the following product from Ali Express Please note this will NOT fit the OEM steering wheel, only the aftermarket carbon covers

Read more less

Carbon Fibre effect vinyl gel designed to cover over the complete control area of the headlight control panel. Fits the following: Mk8 Fiesta Mk4 Focus 2020 Puma Will fit other models using the same panel Please note that extra care should be taken when handling this product as the item could become stretched out of shape if pulled too heavily

Read more less

Designed to cover the bottom strip of the plastic licence plate holders Two versions available depending on the type of plate holder you have: Version 1 - For the Ford Genuine (clam) style Version 2 - For the split opening style (may fit other brands, please check sizes)  The Following logo colours work as follows: The "Line" part of ST Line Logo always stays white The Pumaspeed logo stays white apart from the "S", which changes with the colour selection Sizes Version 1 - 519 x 20mm (fits to far ends, with rounded bottom corners) Version 2 - 450 x 14mm Please check sizes before ordering! See images for further illustrations

Read more less

The glass etched colour choices are highly recommended. The semi-transparent material really sparkles! Image shows our Glitter Black Vinyl. Please note that the colour / shade of the sparkle glass etching will vary massively depending on the tint level of the glass. The darker the tint, the darker the finish of the sparkle effect material will be

Read more less

Supplied as 2 sheets each sheet containing a cut out of the Union Jack Flag, you will be required to trim around the panel to aid fitting.  Best applied to west surface. - Application fluid and squeegee supplied in kit. Vinyl will have application tape applied for easy fit. Top Tip - Take your time when installing these, a heat gun or a hair dryer may come in handy. Also a 2nd pair of hands are always a plus! You will need: A dry, warm day. A sharp knife for cutting vinyl. A Friend or relative to help. Time.

Read more less

Suitable for all Min's F55, F56, F57 with the Aero kit or JCW pack. Available in many colours. Easy to fit. - no cutting required. Please leave a note on your order with your chosen colour option! Colour Options: Gloss White Matt White Gloss Black Matt Black Gloss Primrose Yellow Gloss Light Primrose Yellow Gloss Orange (MK8 Performance Edition) Gloss Light Orange (Ford Orange Fury) Gloss Red Matt Red Gloss Dark Red Gloss Pink Gloss Magenta Gloss Telemagenta Gloss Violet Gloss Cadbury Purple Gloss Delft Blue Gloss Pacific Blue Gloss Marine Blue Gloss Brilliant Blue Gloss Bright Blue Gloss Sky Blue (RS Nitrous Blue) Gloss Turquoise Gloss Petrol Gloss Green Yellow Gloss Mint Gloss Lime (MK2 Focus RS) Gloss Grass Green (Ford Mean Green) Gloss Green Gloss Emerald Green Gloss Light Grey (Ford Silver Fox) Matt Light Grey (Ford Silver Fox) Matt Grey Gloss Dark Grey Matt Dark Grey Gloss Komatsu Grey Gloss Gold Matt Gold Gloss Copper Matt Copper Gloss Silver Metallic Grey Metallic Mid Blue (MK8 Fiesta ST & MK4 Focus ST) Metallic Anthracite Metallic Light Blue (Ford Chrome Blue) Metallic Red Metallic Purple Black Glitter Red Glitter Blue Glitter Dark Blue Glitter Pink Glitter Violet Glitter Flourescent Yellow Flourescent Orange Flourescent Green Flourescent Pink

Read more less

PLEASE CHECK YOUR SURROUND MATCHES THE SHAPE OF OUR IMAGES BEFORE ORDERING AS THE MK7 AND 7.5 HAVE DIFFERENT SHIFTER SURROUNDS, THIS WILL ONLY FIT ON THE GATOR SURROUND PICTURED Add some colour to the interior of your Mk7 Fiesta with this gear shift gator gel cover! 1 x Gel to cover the chrome strip around the gear shift gator surround Please note that extra care should be taken when handling this product as the item could become easily stretched out of shape if pulled too heavily

Read more less

This side stripe follows the upper fold line of the doors and body, cutting through the door handle(s) Available plain or with various Logo's / text cut into the stripe to reveal the body colour underneath Fits all models of the 3 door Mk2 & 2.5 Focus Cut to shape ready for install

Read more less