miscellaneous-aesthetics

Tidy up your engine bay with a Proform engine bay ECU cover.  Available in a range of plastic finishes including Smooth (for Painting), Textured 'OEM' style, Carbon Fibre Effect and a variety of Gloss colours. These covers simply stick over the factory part and are easily removable for servicing etc. 'Speed Shapes' shown for colour demonstration purposes only. Please note smooth for painting plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

  Tidy up your engine bay with a Proform Air Intake cover. Available in smooth plastic, which comes ready to be prepared, sanded and painted/hydrodipped, OEM factory style textured plastic and a range of coloured plastics including our two carbon fibre effect finishes. These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fitting over the top of your factory parts, these covers can be easily removed for servicing or should you fancy changing the theme of your engine bay. Fits all Mk8/8.5 Fiesta ST and Mk2 Puma ST vehicles (only).  Please note this part may need to be trimmed slightly if you have certain aftermarket induction kits fitted.  Please contact us if you are unsure. 'Speed Shapes' shown for colour demonstration purposes only. Please note smooth for painting parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

 Tidy up your engine bay with a Proform Engine Bay Slam Panel cover.  These parts fit neatly over the existing factory slam panel.  Taking literally minutes to fit, this panel is the finishing touch to any detailed engine bay. There is no need to remove the bumper to fit this part.  Fixings and fitting instructions are included. Available in a range of finishes including our new Deluxe Carbon Fibre Effect Plastic. 'Speed Shapes' shown are for colour demonstration purposes only. Please note smooth for painting parts may contain minor manufacturing marks which will be easily removed during the preparation process.

Read more less

  Tidy up your interior with our set of 4 seat rail end covers (for the front of the front seats only). Please note these are to fit the seat rail ends from the Recaro seats fitted in the Mk2.5 Focus RS. Available in a selection of plastic colours/finishes. 'Speed Shapes' shown for colour demonstration purposes only. Please note smooth for painting plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

THIS PRODUCT CAN ONLY BE INSTALLED WITH LED FOG LIGHT BULBS DUE TO THE HEAT EMITTED FROM THE STANDARD HALOGEN BULB! BY PURCHASING YOU ARE CONFIRMING YOU HAVE LED FOG LIGHTS INSTALLED! CEUK Fog Guards for the Rounded Fog Light - Ford. Fits All models with a round Fog Light, Including 60mm and 70mm fog covers. Protect your fog lights whilst adding some colour or style at the same time! Vacuum formed and Cut from Premium ABS these don't just protect, but #Enhance Available in 3 cool designs - Gloss Black Vacuum formed right here in the UK Logo then CNC cut from the formed piece. Solid "2Secure" installation - will not fall off! Perfect Fit Designed & Manufactured in North England. Instructions are provided however they are self explanatory - affixed via 2 Super Secure double sided gel strips and held firmly in place by your fog surround! Why? They just look cool!! Unlike other manufacturers in the market place we've taken the feedback and improved on various flaws with other designs. This product sits firmly on the full fog lense and is held in place by double sided strips of gel tape, as well as the fog surround itself. Not only does this mean you will never lose the product, but it also removes the gastly double sided gel dot supplied by other manufacturers that sits right in the centre of the lense. Our product also does not suffer from a light bleed or ring around the exterior, as it is the full size of the fog light unit. Whats in the Kit: 2x Fog Guards (Left & Right) 6x Double Sided Gel Strips cut to size (Self Application) Instructions Fitting Kit (Optional) If you select no to fitting kit, Please ensure you have a trim removal tool. Fits: Ford Fiesta MK6 All Models Ford Fiesta MK7 All Models Ford Focus MK2 All Models Ford Focus MK3 All Models (Pre Facelift only with circle fogs) Ford Transit Custom Pre Facelift All Models Ford Transit Connect Any other Ford with Round Fog Lights (within reason) Fitting kit includes Trim Removal tool & Alcohol Wipe

Read more less

THIS PRODUCT CAN ONLY BE INSTALLED WITH LED FOG LIGHT BULBS DUE TO THE HEAT EMITTED FROM THE STANDARD HALOGEN BULB! BY PURCHASING YOU ARE CONFIRMING YOU HAVE LED FOG LIGHTS INSTALLED! CEUK Fog Guards for the Rounded Fog Light - Ford. Fits All models with a round Fog Light, Including 60mm and 70mm fog covers. Protect your fog lights whilst adding some colour or style at the same time! Vacuum formed and Cut from Premium ABS these don't just protect, but #Enhance Available in 3 cool designs - Gloss Black Vacuum formed right here in the UK Logo then CNC cut from the formed piece. Solid "2Secure" installation - will not fall off! Perfect Fit Designed & Manufactured in North England. Instructions are provided however they are self explanatory - affixed via 2 Super Secure double sided gel strips and held firmly in place by your fog surround! Why? They just look cool!! Unlike other manufacturers in the market place we've taken the feedback and improved on various flaws with other designs. This product sits firmly on the full fog lense and is held in place by double sided strips of gel tape, as well as the fog surround itself. Not only does this mean you will never lose the product, but it also removes the gastly double sided gel dot supplied by other manufacturers that sits right in the centre of the lense. Our product also does not suffer from a light bleed or ring around the exterior, as it is the full size of the fog light unit. Whats in the Kit: 2x Fog Guards (Left & Right) 6x Double Sided Gel Strips cut to size (Self Application) Instructions Fitting Kit (Optional) If you select no to fitting kit, Please ensure you have a trim removal tool. Fits: Ford Fiesta MK6 All Models Ford Fiesta MK7 All Models Ford Focus MK2 All Models Ford Focus MK3 All Models (Pre Facelift only with circle fogs) Ford Transit Custom Pre Facelift All Models Ford Transit Connect Any other Ford with Round Fog Lights (within reason) Fitting kit includes Trim Removal tool & Alcohol Wipe

Read more less

THIS PRODUCT CAN ONLY BE INSTALLED WITH LED FOG LIGHT BULBS DUE TO THE HEAT EMITTED FROM THE STANDARD HALOGEN BULB! BY PURCHASING YOU ARE CONFIRMING YOU HAVE LED FOG LIGHTS INSTALLED! CEUK Fog Guards for the Rounded Fog Light - Ford. Fits All models with a round Fog Light, Including 60mm and 70mm fog covers. Protect your fog lights whilst adding some colour or style at the same time! Vacuum formed and Cut from Premium ABS these don't just protect, but #Enhance Available in 3 cool designs - Gloss Black Vacuum formed right here in the UK Logo then CNC cut from the formed piece. Solid "2Secure" installation - will not fall off! Perfect Fit Designed & Manufactured in North England. Instructions are provided however they are self explanatory - affixed via 2 Super Secure double sided gel strips and held firmly in place by your fog surround! Why? They just look cool!! Unlike other manufacturers in the market place we've taken the feedback and improved on various flaws with other designs. This product sits firmly on the full fog lense and is held in place by double sided strips of gel tape, as well as the fog surround itself. Not only does this mean you will never lose the product, but it also removes the gastly double sided gel dot supplied by other manufacturers that sits right in the centre of the lense. Our product also does not suffer from a light bleed or ring around the exterior, as it is the full size of the fog light unit. Whats in the Kit: 2x Fog Guards (Left & Right) 6x Double Sided Gel Strips cut to size (Self Application) Instructions Fitting Kit (Optional) If you select no to fitting kit, Please ensure you have a trim removal tool. Fits: Ford Fiesta MK6 All Models Ford Fiesta MK7 All Models Ford Focus MK2 All Models Ford Focus MK3 All Models (Pre Facelift only with circle fogs) Ford Transit Custom Pre Facelift All Models Ford Transit Connect Any other Ford with Round Fog Lights (within reason) Fitting kit includes Trim Removal tool & Alcohol Wipe

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.   AIRTEC Part Number: ATMER47 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats   Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.     Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting.   Fits Right-Hand Drive vehicles only     ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available   ⦁     Vehicle specific – no trimming required   AIRTEC Part Number: ATMER47

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER48 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only ⦁     AIRTEC Motorsport branded complete set of front and rear mats⦁     Fitted with original retaining/mounting holes where applicable⦁     High-quality finish in black with white embroidered logo⦁     Huge range of makes and models available⦁     Vehicle specific – no trimming required AIRTEC Part Number: ATMER48

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER49 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only ⦁     AIRTEC Motorsport branded complete set of front and rear mats⦁     Fitted with original retaining/mounting holes where applicable⦁     High-quality finish in black with white embroidered logo⦁     Huge range of makes and models available⦁     Vehicle specific – no trimming required AIRTEC Part Number: ATMER49

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number:  ATMER45 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats    Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.  Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only   ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available  ⦁     Vehicle specific – no trimming required  AIRTEC Part Number: ATMER45

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER44 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only ⦁     AIRTEC Motorsport branded complete set of front and rear mats⦁     Fitted with original retaining/mounting holes where applicable⦁     High-quality finish in black with white embroidered logo⦁     Huge range of makes and models available⦁     Vehicle specific – no trimming required AIRTEC Part Number: ATMER44

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER43 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats   Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.     Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting.   Fits Right-Hand Drive vehicles only     ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available   ⦁     Vehicle specific – no trimming required   AIRTEC Part Number: ATMER43

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.     Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting.   Fits Right-Hand Drive vehicles only     ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available   ⦁     Vehicle specific – no trimming required   AIRTEC Part Number: ATMER40 

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.  AIRTEC Part Number:  ATMER39 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats  Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.  Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only   ⦁     AIRTEC Motorsport branded complete set of front and rear mats ⦁     Fitted with original retaining/mounting holes where applicable ⦁     High-quality finish in black with white embroidered logo ⦁     Huge range of makes and models available  ⦁     Vehicle specific – no trimming required  AIRTEC Part Number:  ATMER39

Read more less

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. AIRTEC Part Number: ATMER38 TECHNICAL DATA AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material. Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting. Fits Right-Hand Drive vehicles only ⦁     AIRTEC Motorsport branded complete set of front and rear mats⦁     Fitted with original retaining/mounting holes where applicable⦁     High-quality finish in black with white embroidered logo⦁     Huge range of makes and models available⦁     Vehicle specific – no trimming required AIRTEC Part Number: ATMER38

Read more less

Carbon fibre look steering wheel trim surrounds for Transit Custom Originally designed for ST Hatchback Ford Models, the transit shares the same steering wheel so this will also fit - it does however have an embossed ST Logo Includes embossed ST logo - Simply attach using the 3M tape provided Transforms the look of any wheel! Supplied with Alcohol wipe & Instructions

Read more less

This is a replacement ring only for Enhanced Performance Weighted Gear Knob (CEWGKC) Simply slide off your original band and swap it for a different colour, either if you fancy a change or if you have grubby hands and have discoloured your existing band! ----------------- This beautiful piece of kit just got more personal! We give you the customisable Enhanced Performance Weighted Gear Knob Finished in an Anodized Black and supplied with a silicone ring in your chosen colour, not only does this give you an element of performance gain with its weight, combined with the comfort provided from our aesthetic design - but the look can be totally unique to yourself and your theme! The silicone Band is available in one of 4 colours and can be easily removed and replaced with another colour, by simply purchasing our silicone ring pack! Summary Perfect fit for our Gear Knob Easily replaced, simply stretch old one off and slide new ring on High quality silicone material, easily cleaned and maintained 4 vibrant colours with potential for more in future Confirmed fitment: Ford Fiesta MK7 with Lift Up reverse Lever (2012-2017) Ford Fiesta MK8 All Models Ford Focus MK3 All Models Ford Focus MK4 All Models Ford Transit Custom All Models Any Vehicle with M12 x 1.25 thread & Lift Up Reverse Lever   Please note: Whilst this is hard anodized for durability, the wearing of rings on your shift hand could cause scratches to the surface area - This isn't covered under warranty

Read more less

RacingLine Performance Billet Aluminium 'Manual' Gear Knob - Black - MQB / MQB EvoWelcome to RacingLine’s Billet Gear Shift Knob. A beautiful, hardwearing weighted shift knob for most MQB & MQB EVO 6-speed manual gearbox cars.CNC Machined from a solid billet of aluminium, then lovingly hand-polished and anodised in glossy, hardwearing midnight black. Unlike many factory or aftermarket leather shift knobs, this metal version will withstand years of use without wear or deterioration.This lovely cool, smooth shifter will not only feel great in your hand. Weighing in at approximately 300 grams / 10.5 oz, the added inertial mass makes gearchanging effort substantially less while speeding up the throw at the same time.The RacingLine Gear Shift Know gives you a choice of top to finish: two die-cast 'coins' are provided with each kit. This allows you to select between a conventional 6-speed shift pattern or a neat R-bar logo option.Fitting is simple: by using a modular threaded insert design, this shift knob is compatible with most MQB or MQB EVO vehicles. A neat threadless adaptor collar is included with set screws for rigid fitment onto the shaft to ensure no looseness or twisting can occur.

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit Yaris GR models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight alloy and comes in a high quality powder coated black finish. It also features a sight glass to view the coolant level and comes with an uprated high pressure cap. The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process. With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.  Please note: The Stant quick release high-pressure cap displayed in the images is for illustration purposes only, as Stant caps are no longer available. We now supply a replacement quick release high-pressure cap in a similar style. Features Direct replacement header tank for the Yaris GR Lightweight aluminium construction High quality black powder coat finish  Sight glass to view coolant level Uprated high pressure cap included No drilling or cutting required All fixtures included as well as fitting instructions AIRTEC Part No: ATMSYGR10

Read more less

As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our additional cold air feed guide for the ST model. During the development of our AIRTEC Motorsport enclosed air box and oil cooler kits, we created an additional comprehensive solution to further improving the car’s cooling ability and reduce air intake temperatures on track or during fast road use. AIRTEC Part No: ATMSFO130 TECHNICAL DATA As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our additional cold air feed guide for the ST model. During the development of our AIRTEC Motorsport enclosed air box and oil cooler kits, we created an additional comprehensive solution to further improving the car’s cooling ability and reduce air intake temperatures on track or during fast road use. With vast experience in developing uprated cooling packages for a variety of modified track and road cars, the challenge with the Mk8 Fiesta ST was the very limited available space directly behind the open grille area. As a result, we developed an innovative air guide solution to help direct larger volumes of cold air towards the original top air intake feed. The size of the air guides are not only larger than standard but the guide also features a side air duct, utilising the space in the upper right-hand section of the grille area to feed cold air through trunking to either the Enclosed Induction Kit or our soon to be released AIRTEC Motorsport Oil Cooler Kit. Made from aluminium, the kit includes all fixtures and fittings, including instructions, for a simple bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk8 ST models. Please note: Fits with any aftermarket intercooler that retains OEM plastic upper surround. This will NOT fit with AIRTEC Motorsport Stage 3  – please see here: AIRTEC  Cold Air Feed for MK8 ST Stage 3 Intercooler Features: Comprehensive kit designed specially for the Mk8 Fiesta ST platform Reduces temperatures on track and road Larger air guides direct more flow towards the original intake Also directs a constant feed of cold air to the air box or oil cooler Reduces temperatures on track and road Designed and developed in the UK No cutting or drilling required to fit Bespoke laser-cut aluminium design High quality powder coated black finish Complete with all fittings and instructions AIRTEC Part No: ATMSFO130

Read more less

As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our additional cold air feed guide for the ST model. During the development of our AIRTEC Motorsport enclosed air box and oil cooler kits, we created an additional comprehensive solution to further improving the car’s cooling ability and reduce air intake temperatures on track or during fast road use. AIRTEC Part No: ATMSFO128 TECHNICAL DATA As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our additional cold air feed guide for the ST model. During the development of our AIRTEC Motorsport enclosed air box and oil cooler kits, we created an additional comprehensive solution to further improving the car’s cooling ability and reduce air intake temperatures on track or during fast road use. With vast experience in developing uprated cooling packages for a variety of modified track and road cars, the challenge with the Mk8 Fiesta ST was the very limited available space directly behind the open grille area. As a result, we developed an innovative air guide solution to help direct larger volumes of cold air towards the original top air intake feed. The size of the air guides are not only larger than standard but the guide also features a side air duct, utilising the space in the upper right-hand section of the grille area to feed cold air through trunking to either our  Enclosed Induction Kit or our soon to be released AIRTEC Motorsport Oil Cooler Kit. Made from aluminium, the kit includes all fixtures and fittings, including instructions, for a simple bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk8 ST models. Please note: Fits with any aftermarket intercooler that retains OEM plastic upper surround. This will NOT fit with Stage 3 AIRTEC Motorsport – please see here: AIRTEC  Cold Air Feed for MK8 ST Stage 3 Intercooler Features: Comprehensive kit designed specially for the Mk8 Fiesta ST platform Reduces temperatures on track and road Larger air guides direct more flow towards the original intake Also directs a constant feed of cold air to the air box or oil cooler Reduces temperatures on track and road Designed and developed in the UK No cutting or drilling required to fit Bespoke laser-cut aluminium design High quality powder coated black finish Complete with all fittings and instructions AIRTEC Part No: ATMSFO128

Read more less

Tidy up your engine bay with a Proform brake reservoir cover! Available in a range of finishes including smooth plastic (which comes ready to be prepared, sanded and painted/ hydrodipped), OEM factory style textured plastic, carbon fibre effect plastic as well as a range of gloss colours.   These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. Fitting over the top of your factory parts, these covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. Some pictures show part with removable protective film on.   Speed shapes pictured for colour demonstration purposes only. NB: Please note 'smooth' plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform coolant tank cover! Available in a range of finishes including smooth plastic (which comes ready to be prepared, sanded and painted / hydrodipped), OEM factory style textured plastic, carbon fibre effect plastic as well as a range of gloss colours.   These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. Fitting over the top of your factory parts, these covers can simply be removed for servicing or should you fancy changing the theme of your engine bay.   Some pictures show part with removable protective film on. Speed shapes pictured for colour demonstration purposes only. NB: Please note 'smooth' plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less