Performance - Audi A1 8X (2010-2018)

This adaptor plate installs between the boost (MAP) sensor and mounting surface to allow a tapping to run a vacuum operated valve or for connection to a boost gauge.   In The Box:1 x Vacuum Tap2 x M6 x 35 Socket Cap Bolts2 x M5 x 35 Self Tapper Screws1 x Instructions1 x Forge Sticker FITS: AudiA1A1 (8X) 2010-2018A31.2 TSI upto 20141.8TA4DieselTTMk2DieselTTRSMk2 8J (2009-2014)SeatLeonMk2 2005-20121.2 TSI 2009-20121.4 Turbo 2007-2012SkodaOctaviaDieselVolkswagenAmarokEOSGolfMK51.4 S/Charge1.4 TurboDieselMK61.4 Turbo1.4 TwinchargedJettaMK5 (2005-2010)Polo1.4 TSI   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

The oil filter housing on modern VAG engines does not allow for the previously common takeoff plates to fit under the filter and divert oil into an oil cooler mounted elsewhere on the vehicle. Instead they now use a oil to water cooling ‘block’ bolted to the front of the engine, and in many cases an undersize filter, or a paper drop in element, which prevents easy fitting of an oil cooler. As many people have found, if the vehicle is tuned, or if it is towing a heavy load, oil temperatures can rocket, with oil temperatures over 120°C (250°F) being easily achieved, which is close to the point that engine oil starts to break down. The Forge Motorsport FMOC2 replaces the oil to water cooling block, and although it still allows coolant to circulate, it more importantly gives two M22 takeoffs which, when fitted with the appropriate adaptor, allow fitment of oil cooler lines between an -6 and an -10 in size which can then be attached to an external oil cooler. Oil temperatures are stabilised, and engines can be worked harder for longer. To confirm fitment, please check the list of compatible vehilces below. This plate replaces the VAG OEM Part No. 03L 117 021 C. It fits ALL of the 2.0TDi and 1.6 TDi engines in the vehicles listed below. VW 2010-on Amarok, 2012-on Beetle, 2010-on Caddy, 2012-on CC, 2012-on Crafter, 2011-2016 Eos, 2012-on Golf Cabriolet, 2009-on Golf, 2009-2014 Golf Plus, 2011-on Jetta, 2011-on Passat, 2010-on Polo, 2009-on Scirocco, 2008-on Tiguan, 2011-on Touran, and 2010-on Transporter Audi 2011-on A1, 2009-2013 A3, 2008-on A4, 2012-on A5, 2011-on A6, 2012-on Q3, 2009-on Q5, and 2011-on TT Skoda 2011-on Fabia, 2009-on Octavia, 2012-on Rapid, 2011-on Roomster, 2008-on Superb, and 2010-on Yeti Seat 2011-on Alhambra, 2007-on Altea, 2009-on Exeo, 2009-on Ibiza, 2011-on Leon, and 2013-on Tolde   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Cars

Read more less

The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge VW Golf MK1 Race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components. ·       Stainless Steel Rivets·       Stainless Steel Fasteners·       Carbon fabric Outer Shell·       Calcium Magnesium Silicate Wool constructed Inner Core·       High temperature silica fabric The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers: AudiA1A1 (8X) 2010-20181.4 TSI 2015 OnwardsA31.4 TSI/TFSI 2015 Onwards (8V)S32.0 TSI (8V Chassis)S4B9TTSMk3 8S 316bhp (late 2022-)CupraAteca(up to 2020)Formentor2.0 TSI (310 BHP)SeatIbizaMk4.5 (6P) 2015-20171.4 TSILeonMk3 2012-20201.4 TSI 125/140/150 BHP 2014-2019Cupra 280/290/300RSkodaSuperb280 4x4 DSGVolkswagenArteon(2017-2020)(2020-)GolfMK71.4 TSI 125BHP/138BHP/150BHPGTIGTI Clubsport ED40RMK7.51.4 TSI 138BHP/150BHPGTI RMK8RJettaMK6 (2010-2018)1.4 TSIMK7 (2018-2021)1.4 TSI2.0 GLIMK7.5 (2021-)2.0 GLIPoloGTI 2.0 2018-2020 AW ChassisT6T6 (2015-2019)2.0 TSITiguan2.0 TSI 2017 OnwardsR 2022 Onwards (Gen 4) Interior Surface: ·       Max Temperature Rating: 2300°F/1260°C·       Continuous Use Limit: 1832°F1000°C Exterior Surface: ·       Direct Contact Limit: 1800°F/982°C·       Radiant Heat Limit: 2500°F/1371°C   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 13 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 13mm spacer will give an overall track increase of 26mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS13 13mm Wheel Spacer1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Front Replacement Brake discs for Forge Motorsport Brake kits. 330 x 32 Discs  Bolt Kit 2-piece floating rotors CNC machined lightweight forged billet aluminium rotor hats/bells Proprietary iron alloy rotor discs with directional curved vanes for optimized rotor cooling Slotted rotors for dust and gas evacuation adds long term durability ***THE MINIMUM THICKNESS OF THESE DISCS SHOULD BE NO LESS THAN 29mm BEFORE THEY ARE CHANGED*** Please Lock with 14NM Please Note:Forge Motorsport or its resellers will not offer any warranty or replacement if brake vibration, abnormal pad wear, caused by uneven discs which has resulted after poor and incorrect installation.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

Yet another first for the Volkswagen and Audi Tuning Market from Forge! With the introduction of the VAG 1.4 litre TSi Turbo/Supercharged Engine, we have developed an Atmospheric Blow-Off adapter specifically designed to fit this application. Simple in execution, yet offering the desirable atmospheric blow-off valve sound, this product has been designed to be fully compatible with complexities of this engine. Please choose from a black or silver adaptor using the options above.   In The Box:1 x FMDV14TSI Adaptor2 x M6 x 35 Socket Cap Bolts5 x M6 Washers1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FITS: AudiA1A1 (8X) 2010-20181.4 TwinchargedA31.4 TwinchargedSkodaFabia5J 2007-20141.4 TSI VRSVolkswagenEOSGolfMK51.4 S/ChargeMK61.4 TwinchargedPolo 1.4 GTIScirocco1.4 Twincharged 160Tiguan1.4 TSI Mk1

Read more less

PLEASE BE AWARE THIS IS NOT A REPLACEMENT PART FOR CARS THAT HAVE ELECTRONIC ACTUATORS. WE ADVISE YOU TO CHECK WHAT YOU HAVE BEFORE ORDERING THIS ITEM. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. FMACVAG09 Application List:Golf MK5 1.4 122 TSIGolf MK6 1.4 122 /125 TSILeon 1.4 122 / 125 TSIIbiza 1.4 122/125 TSIScirocco 1.4 122/125 1.4 TSIAudi A1 122/125 1.4 TSIAudi A3 122/125 1.4 TSIEos 1.4122 TSIFabia 1.4 122 TSIOctavia 1.4 122 TSIRoomster 1.4 122 TSISuperb 1.4 122 TSI In The Box:1 x FMACVAG09 Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge Motorsport Boost Tap Kit for 1.2 TSI Engines with code CBZA, CBZB or CBZC. This adaptor installs between the boost (MAP) sensor and the intake manifold. A simple solution for fitting a boost gauge or vacuum operated valve without having to cut into any original equipment.  Hardware including silicon hose and fitting instructions are supplied and the application is fully reversible. In the Box: Small Forge Sticker3.5mm Vac PortCable ties (x10)Cork gasket4mm Vacuum HoseInstructions QR Label FITS: AudiA1A1 (8X) 2010-20181.2 TSI 2010-20141.2 TSI 2015 OnwardsSeatIbizaMk4 (6J) 2008-20151.2 TSISkodaFabia5J 2007-20141.2 TSIVolkswagenPolo1.2 TSI upto 2014   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This valve has been specifically designed for the Audi A1 1.4 Turbo (122hp) engine. This is a full replacement atmospheric blow-off valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our many TSI replacement valve options, the valve is fully engineered to remedy the failure issues associated with the OEM solenoid valves. FITS: AudiA1A1 (8X) 2010-20181.4 TurboSeatLeonMk2 2005-20121.4 Turbo 2007-2012SkodaYeti1.4TS 122ps (2008-2012)VolkswagenScirocco1.4 Turbo 120 Please note this valve is only compatible with models that have a turbo mounted diverter valve as standard, as found in models up to and including most 2014 models. For recent 1.4 turbo models that do not have a standard turbo mounted diverter valve please see part number FMDV1.   Our valve uses full billet alloy construction with a piston based internal design that provides significantly improved reliability over the OEM valves, along with lightning fast response.   In The Box:1 x FMDVA1TSI Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x 2000mm Length of 4mm Vac Hose1 x Skoda Vacuum Tap2 x M5 x 35 Self Tapper Screw1 x Uprated Blue Spring10 x Cable Ties1 x Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exclusively for Forge by filtration gurus Pipercross, and feature the latest multilayer-foam technology that is proving to be so successful in this season’s British Touring Car Championship  (BTCC). These are priced individually. Please order 2 when replacing carbon canister/filters on the FMINDGOLR system. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.  

Read more less

Product Description Forge / Pipercross 80mm I/D Rubber Neck Open Cone Air Filter High flow foam construction with a foam top for increased surface area and an inner cage for support. Replacement filter for the following kits: FMINDAVXRH - Astra Vxr induction kit FMINDR35 - Nissan R35 GTR induction kit FMINDIB12 – Seat Ibiza 1.2 TSi *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.

Read more less

Streetwize Full Face Yellow Steering Wheel Lock Fits most cars and vans with steering wheels up to 39cm. Comes with high security Keys and storage bag. Anti-theft protection for car and airbag High visibility deterrent Fitted with unique cross key locking mechanism 2 Keys supplied Fits most vehicles Made from hard wearing steel

Read more less

Streetwize Double Hook Steering Wheel Lock - Yellow Double hook car steering wheel lock Heavy duty design Unique cross key locking mechanism Helps increase vehicle security Yellow colour Fits most vehicles Easy to use Complete with 2 keys Locking and unlocking instructions printed on reverse of packaging    

Read more less

Streetwize Baseball Bat Steering Wheel Lock - Yellow Fitted with unique cross key locking mechanism High visibility deterrent

Read more less

M14 Radius wheel Bolts for use with alloy wheels and wheel spacers * 5 stud VAG OnlyPriced per bolt. - M14 x 1.50 Thread Pitch- 10.9 High Tensile Steel- 17mm Hex - Round/Radius Seat Notes: This is for One wheel bolt only. Please enter the amount of wheel bolts you require. ---------------- M14 Tapered wheel Bolts for use with alloy wheels and wheel spacers * 5 stud VAG OnlyPriced per bolt. - M14 x 1.50 Thread Pitch- 10.9 High Tensile Steel- 17mm Hex - Tapered Seat Notes: This is for One wheel bolt only. Please enter the amount of wheel bolts you require.

Read more less

M14 Tapered wheel Bolts for use with alloy wheels and wheel spacers * 5 stud VAG OnlyPriced per bolt. - M14 x 1.50 Thread Pitch- 10.9 High Tensile Steel- 17mm Hex - Tapered Seat Notes: Each order is for Pack of 10

Read more less

M14 Radius wheel Bolts for use with alloy wheels and wheel spacers * 5 stud VAG OnlyPriced per bolt. - M14 x 1.50 Thread Pitch- 10.9 High Tensile Steel- 17mm Hex - Radius/Rounded Seat Notes: This is for One wheel bolt only. Please enter the amount of wheel bolts you require.

Read more less

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less

RacingLine Performance Oil Cap - 1.0TSI 1.2TSI 1.4TSI and GTERacingLine Performance's billet aluminium Oil cap to suit the EA211 Small engine TSI models comes complete ready to fit; including a new seal!  WHY CHANGE YOUR OIL CAP?The precision engineering ensures absolute tightness when fitted, even with the heat soak from a high performance engine. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with all TSI enginesThe precision engineering ensures absolute tightness when fitted, even with the heat soak from a high performance engine. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with all TSI enginesThe precision engineering ensures absolute tightness when fitted, even with the heat soak from a high performance engine. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with all TSI engines. CONFIRMED APPLICATIONS VWR190004 All EA211 engines: 1.0 TSI 1.2 TSI 1.4 TSI 1.4 GTE/hybrid ​ Multiple vehicle types with this engine, including: > VW Golf 8 2020+ > VW Golf 8 GTE 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat B8 2015+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco TSI / TDI 2008-2017 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 6C/6R 2008-2018 > VW Polo 6 AW 2017+ > VW Caddy 1.0 TSI 2015+ > VW T-Cross 2017+ > Audi A1 2010-2018 > Audi A1 GB 2019+ > Audi A3 8Y 2020+ > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi Q2 2017+ > Audi A3 8P 2003-2012 > SEAT Ibiza 6J 2008-2017 > SEAT Ibiza 6F 2017+ > SEAT Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Leon II 1P 2005-2012 > SEAT Ateca 2016+ > SEAT Arona 2017+ > SEAT Toledo 2012+ > SEAT Tarraco 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Octavia II 1Z 2004-2013 > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Rapid 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Kodiaq 2018+ > Porsche 911 991 2012+ > Porsche Boxster & Cayman 981/982 2012+

Read more less

Racingline Filter Oil & Cleaning Kit The Racingline Oil and Cleaner Kit will help you keep your filter in peak condition at all times and ensure that the complex triple-layer foam continues to deliver its power and filtration benefits for many years. Instructions are provided for cleaning and maintenance. It’s a simple process, but please take time to read through, or ensure that your technician reads them, before you begin. We would suggest that you keep these notes with your car for future maintenance/owners. We recommend that the filter element is cleaned and reoiled every 10,000 miles/16,000 km, and/or a visual inspection at least every 12 months. This is a simple procedure, and will ensure that your filter continues to deliver the power improvements over a standard car. If your car is regularly used in a dry/dusty environment, we advise that you clean and re-oil your filter more regularly If you don’t clean your filter at the above intervals, no loss of filtration will occur, and your engine will still be fully protected. However, the performance advantages from the additional air flow of a clean filter will be lost. You will also shorten the life of the filter element. REPLACEMENT FILTER Like all the other filters on your car, it’s worth replacing the air filter element itself periodically. Rather than cleaning and re-oiling, lots of customers prefer to simply replace their filter element for what is a relatively low cost. We recommend replacement after 2 years for optimum performance. Of course, the filter will last for a longer period of time with correct maintenance and inspection for condition of foam as laid out below. BUY REPLACEMENT FILTER Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR120000

Read more less

Filters are recommended to be cleaned every 5000Km with either compressed air or with this cleaning kit. Special Notes:WE CANNOT SHIP THIS ITEM OUTSIDE OF THE UK DUE TO LIMITATIONS ON SHIPPING LIQUID CHEMICALS AND AEROSOLS

Read more less

1.0 TSI High-FlowPanel Air Filter. Set your VWG 1.0 TSI engine free by allowing it to breathe better and operate more efficiently. What doesit do? Looking for a simple, warranty-friendly upgrade for your car? ​ Our High-Flow Panel Air Filter is now available for cars fitted with the 1.0 TSI engine to replace the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam® filter. Put simply, it’s the best Panel Air Filter you can buy. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part. Allow your engine to breathe better and operate more efficiently – improve the engine’s airflow, and power and fuel economy gains will follow.  By removing the inevitable restrictions that the standard paper panel filter gives, our Panel Filter allows a small but worthwhile increase in airflow through to the turbo.   TRIFOAM® FILTER Our unique Trifoam® filter construction allows us to sandwich three different foams together for the perfect filtration and minimum restriction. HAND-MADE IN UK Each filter construction is hand-made in the UK for the reassurance of the highest quality together with exceptional dust-loading properties. EFFICIENCY GAINS The result?  More mid-range power and improved economy, without wrecking your warranty. Confirmed applications. VWR11UPGT All VWG Models with 1.0 TSI EA211 engines: > VW Golf 7 & 7.5 1.0 TSI 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW T-Roc 1.0 TSI 2017+ > VW Polo 5 1.0 TSI 6C 2015-2018 > VW Polo 6 1.0 TSI AW 2017-2020 > VW Caddy 1.0 TSI 2015+ > VW T-Cross 1.0 TSI 2017+ > VW Touran 2018+ > Audi A1 1.0 TSI 8X 2015-2018 > Audi A1 1.0 TSI GB 2018-2020 > Audi A3 1.0 TSI 8V 2016-2020 > Audi Q2 1.0 TSI 2016+ > SEAT Ibiza 1.0 TSI 6F 2017-2020 > SEAT Leon III 1.0 TSI 5F 2015-2020 > SEAT Ateca 2016+ > SEAT Arona 1.0 TSI 2017+ > SEAT Toledo 2012+ > Skoda Octavia III 1.0 TSI 5E 2016-2020 > Skoda Fabia III 1.0 TSI NJ 2015+ > Skoda Karoq 2017+ > Skoda Rapid 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+

Read more less

1.5 TSI High-FlowPanel Air Filter. Set your MQB & MQB 'evo' 1.5 TSI engine free by allowing it to breathe better and operate more efficiently What doesit do? Looking for a simple, warranty-friendly upgrade for your car? ​ Our High-Flow Panel Air Filters, available for all Volkswagen Group 'MQB' 1.5 TSI EA211 cars, replace the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam® filter. Put simply, it’s the best Panel Air Filter you can buy. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part. Allow your engine to breathe better and operate more efficiently – improve the engine’s airflow, and power and fuel economy gains will follow.  By removing the inevitable restrictions that the standard paper panel filter gives, our Panel Filter allows a small but worthwhile increase in airflow through to the turbo.   TRIFOAM® FILTER Our unique Trifoam® filter construction allows us to sandwich three different foams together for the perfect filtration and minimum restriction. HAND-MADE IN UK Each filter construction is hand-made in the UK for the reassurance of the highest quality together with exceptional dust-loading properties. EFFICIENCY GAINS The result?  More mid-range power and improved economy, without wrecking your warranty. Confirmed applications. VWR11G815 All VWG 1.5 TSI EA211 EVO engines, including: > VW Golf 8 1.5 TSI 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > VW Touran 2018+ > Audi A1 2010-2018 > Audi A1 GB 2019+ > Audi A3 8Y 2020+ > Audi A3 8V 2013-2020 > Audi Q3 2019+ > Audi Q2 2017+ > SEAT Ibiza 6F 2017+ > SEAT Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Ateca 2016+ > SEAT Arona 2017+ > SEAT Toledo 2012+ > SEAT Tarraco 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Fabia IV 2021+ > Skoda Karoq 2017+ > Skoda Rapid 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Kodiaq 2018+

Read more less

Racingline Replacement 352mm Rotors - STAGE 3 - VWR680000These replacement Rotors come without bells ready to build onto the original bells of your 2013-2016 Volkswagen Racing 6-Pot Brake kit.Please note: They are not compatible with the Other generations of Racingline Big Brake Kit. Racingline Replacement 360mm Rotors - STAGE 3 - VWR680001 These replacement Rotors come without bells ready to build onto the original bells of your 2016-2018 Racingline 6-Pot Brake kit.Please note: They are not compatible with the Other generations of Racingline Big Brake Kit. Racingline 345mm Replacement Rotors (Complete) - STAGE 2 - VWR680002These replacement rotors are suitable for the Racingline 'Stage 2' Brake Kit for the PQ35 Platform and MQB Platform ModelsSold as a Pair of Rotors.- The discs have a new thickness of 30mm- The min thickness is 28mm- The max wear thickness is 1.4mm per side Racingline Replacement 355mm Rotors - STAGE 3 - VWR680003These replacement Rotors come without bells ready to build onto the original bells of your Current Generation 355mm Racingline Stage 3 Big Brake Kit.- The discs have a new thickness of 32mm- The min thickness is 30mm- The max wear thickness is 1.4mm per sidePlease note: They are not compatible with the Older generations of Racingline Big Brake Kit. Racingline Replacement 380mm Rotors - STAGE 3 - VWR680004These replacement Rotors come without bells ready to build onto the original bells of your Current Generation 380mm Racingline Stage 3 Big Brake Kit.- The discs have a new thickness of 32mm- The min thickness is 30mm- The max wear thickness is 1.4mm per sidePlease note: They are not compatible with the Older generations of Racingline Big Brake Kit.

Read more less