Performance - Audi A6 C8 (2020-Present)

The T9380 is the latest addition to the DV+ range of diverter valves from GFB (Go Fast Bits). It is specifically designed as a complete replacement for the newer generation of Continental brand OEM diverter valves found in late-model VW and Audi vehicles. Unlike the earlier generation diverter valves manufactured by Pierburg, the newer Continental valves cannot be disassembled and integrated into a DV+. Therefore, GFB developed the T9380 with a low-profile integrated solenoid as a complete replacement for the Continental diverter valve, enabling a hassle-free installation with no clearance issues. Like all valves in the DV+ range, the new T9380 delivers the following benefits over the OEM diverter valve: T9380 DV+ Improved boost holding Sharper throttle response Faster boost recovery after a gearshift or brief throttle lift Unrivalled longevity, backed by our Lifetime Warranty Improved Boost Holding Since electronic OEM diverter valves first appeared in the mid-2000s, there have been many revisions over the years in an attempt to address reliability issues. Whilst the latest generation of OEM diverter valves have become more reliable, there is always a performance trade-off due to their operational method and plastic construction. When GFB engineers performed boost leak testing on the OEM diverter valve in a VW Mk8 Golf R, they found the leak was significantly larger than in earlier generations. This excessive leaking is due to the emerging trend of manufacturers mounting diverter valves remotely on plastic piping rather than directly on the turbocharger. A plastic valve mechanism closing onto a plastic seat resulted in the largest OEM diverter valve leak we’ve seen yet at 28L/min at 1 Bar of boost. Even with the Viton face seal (featured on all DV+ pistons), the plastic OEM seat face was found to be so uneven that it was impossible to achieve a reliable seal. The T9380 successfully addresses this issue by incorporating an integral piston seat machined into its body. This design ensures a proper seal, even on uneven plastic OEM seats. Sharper throttle response, faster boost recovery after brief throttle lift Factory electronic diverter valves are binary in operation – they’re either open or shut. Your throttle, however, isn’t. When you make small throttle adjustments, the binary operation of the factory diverter results in abrupt changes in power delivery, which is the very definition of poor throttle response. The DV+ patented “pilot actuation” system allows the piston to open and close progressively, thereby smoothing the power delivery during throttle modulation, and ultimately improving throttle response. Unrivalled longevity, backed by our Lifetime Warranty The combination of precision manufacturing, attention to detail, and robust materials mean the DV+ will last a lifetime. So does the warranty! FITS: Make Model Mark Variant FuelType YearFrom YearTo Audi A4 B9 Avant RS4 quattro Petrol 2017 2024 Audi A4 B9 Avant S4 quattro Petrol 2016 2019 Audi A5 F5 RS5 quattro Petrol 2017 2024 Audi A5 F5 S5 quattro Petrol 2017 2024 Audi A5 F5 S5 quattro Petrol 2016 2024 Audi A5 F5 S5 quattro Petrol 2016 2024 Audi A6 C8 Avant 3.0 55 TFSI Mild Hybrid quattro Hybrid 2018 2024 Audi A6 C8 S6 TFSI Mild Hybrid quattro Plug-In 2020 2024 Audi A6 C8 Saloon / Limousine 3.0 55 TFSI Mild Hybrid quattro Hybrid 2018 2024 Audi A7 4KA 55 TFSI Mild Hybrid quattro Petrol 2017 2024 Audi A8 4N2,4N8,4NC,4NL 50 TFSI Mild Hybrid quattro Plug-In 2018 2024 Audi Q5 SQ5 TFSI quattro Petrol 2021 2024 Audi Q7 4MB 55 TFSI quattro Plug-In 2021 2024 Audi Q8 4MN 55 TFSI e quattro Plug-In 2020 2024 Audi Q8 4MN 55 TFSI Mild Hybrid quattro Plug-In 2018 2024 Skoda Octavia MK4 2.0 TSI RS Petrol 2020 2024 Volkswagen Golf MK8 2.0 GTI Petrol 2020 2024 Volkswagen Golf MK8 2.0 GTI Petrol 2020 2024 Volkswagen Golf MK8 2.0 GTI Petrol 2021 2024 Volkswagen Golf MK8 2.0 GTI Clubsport Petrol 2020 2024 Volkswagen Golf MK8 2.0 TSI R 4motion Petrol 2020 2024

Read more less

Price is for one strut / prop Product can be used on Bonnets (Hoods) / Boot (Trunks) and Doors Pro Props Carbon Fibre Bonnet Prop Introducing the Pro-Prop, the ultimate finishing touch for your car at shows. Manufactured in the UK, this lightweight and secure carbon fibre bonnet prop (hood prop) is specifically designed for display purposes. Its sturdy construction makes it perfect for holding bonnets open, whether or not your vehicle has gas lift struts. Crafted from the lightest genuine carbon fibre tubing and featuring precision-machined billet aluminium components with stainless steel fixings, the Pro-Prop offers both functionality and a sleek, professional appearance. Shaft Made from genuine carbon fibre, the shaft is ultra-thin and lightweight, with no wrapping or skinning—this is the real deal. Upper Fixing Precision CNC machined from billet aluminium, the upper fixing ensures a premium finish while maintaining lightweight properties. It includes a tactile thumb screw to securely attach the prop to your vehicle’s bonnet hook. Lower Fixing Also precision CNC machined from billet aluminium, the lower fixing houses a 304 stainless steel hook, allowing you to lock it into your vehicle’s latch system. This lower hook offers up to 45mm of vertical adjustment for a perfect fit. Once fitted, the Pro-Prop remains secure. To disengage, simply release your bonnet as usual, and then store the prop in the supplied tube for safekeeping until your next show or meet. Sizing Length of Carbon Section only: 550mm / 55cm Total length of all parts: 670mm / 67cm Adjustment Capability: 50mm / 5cm (Taking total to possible 720mm / 72cm)

Read more less

Racingline Racing Brake Fluid - 500 mlWhether you're running stock brakes for Fast Road, or a Big Brake Kit on the track, the new Racing Brake Fluid from Racingline is a fantastic upgrade to any braking system! * Compatible with all brake set ups - from standard factory brakes right up to our mighty Stage 3 Big Brake Kits on track* One of the highest specification brake fluids on the market* Suitable for any form of motorsport as well as day to day road use without compromise* Since our Racing Brake Fluid is significantly less expensive than buying new pads or a big brake kit, this is your ideal first braking modification* A Highly Refined Super-DOT4 fluid, giving significantly higher boiling point than regular DOT4 or DOT5.1* Racingline's Racing Brake Fluid has a Dry Boiling point of 312ºc, and a wet boiling point of 204ºc PLEASE NOTE: We can only ship this product within Mainland UK. This item or subsequently any orders with this item on from outside mainland UK will be cancelled and refunded. 

Read more less

PF3-1660 is a polyurethane jack pad to fit into the plastic lifting points found on a large number of performance Audi vehicles and is designed to help lift stability and location, whilst protecting the underside of your vehicle. OEM Part Number: 420803855A / 4S0803855B OEM Part Number: 4KE802847A / 4KE802847B OEM Part Number: 8K0802247B Size 80mm Diameter Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price FITS: AUDI A6 / S6 / RS6 C6 (2004/2011) AUDI A6 (2011-2018) AUDI A6 QUATTRO (2011-2018) AUDI S6 (2012-2018) AUDI A7 (2010-2017) Audi R8 (2006 - ON), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014) Audi A4 (2008-2016),  Audi A4 Quattro (2008 - 2016),  Audi RS4 (2012-2016),  Audi S4 (2009-2016),  Audi A5 (2007-2016),  Audi A5 Quattro (2007-2016),  Audi RS5 (2010 - 2016),  Audi S5 (2007 - 2016),  Audi A6 (2011 - ),  Audi A6 Quattro (2011 - ),  Audi RS6 (2012 - ),  Audi S6 (2012 - ),  Audi A7 (2010 - 2017),  Audi A7 Quattro (2010 - 2017),  Audi RS7 (2013 - 2017),  Audi S7 (2012 - 2017) ,  Audi R8 (2006 - ON),  Audi Q5 (2008-2017),  Audi Q5 Quattro (2008-2017),  Audi SQ5 (2013 - 2017),  Audi TT MK2 8J (2007-2014)  

Read more less

Front Splitter Audi A6 Allroad C8 FITS ONLY:Audi A6 Allroad C8 (2018-2023) COMPLETE SET CONTAINS:-> Front Splitter-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> Front Splitters help produce a larger surface area for downforce, improving vehicle stability.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Central Rear Splitter (Vertical Bars) Audi A6 Allroad C8 FITS ONLY:Audi A6 Allroad C8 (2018-2023) COMPLETE SET CONTAINS:-> Rear Diffuser-> Fitting manualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Side Skirts Diffusers Audi A6 Allroad C8 FITS ONLY:Audi A6 Allroad C8 (2018-2023) COMPLETE SET CONTAINS:-> Side Skirt Diffusers (Left + Right)-> Fitting Kit-> Fitting ManualCOLOUR:-> Gloss Black CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Description We introduce to you the IllumiNite D2S Bi Xenon replacement bulb upgrade!  A simple replacement unit, completely plug and play providing phenomenal results. Suitable for any D2S application including self leveling headlights. Upto 50% Brighter than OEM / Standard Headlights providing a safer driving experience at night but without causing glare to other drivers. Suitable for Projectors - Will not burn lenses! Technical Specs Colour: 6000K White Power: 12v / 35w Fitment: D2S Xenon / HID Pack Contents 2x D2S Bulbs Guarantee Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. 14 day Money back guarantee if unsatisfied Subject to product being returned at Buyers cost in a re salable condition!

Read more less

Description: When traveling Abroad, or even in the UK its always best to have a tyre inflator in your vehicle! 12v with fused cigerette lighter plug - up to 300psi. Complete with adapter kit for football and bicycle. 3mtr Cable - Enough to use even on large vehicles.

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less

Street PRO Rear Diffuser Audi A6 C8 FITS ONLY:Audi A6 C8 (2019-) COMPLETE SET CONTAINS: §  Maxton Racing Rear Diffuser §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Spoiler CAP Audi A6 Sedan C8 FITS ONLY:  Audi A6 Sedan C8 (2019-) Please Note:  ** The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. ** COMPLETE SET CONTAINS:-> Spoiler Extension with 3M Tape-> Degreasing Cloth Fitting manuals: SPOILER EXTENSION INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure. We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

Central Rear Splitter Audi A6 C8 FITS ONLY: Audi A6 C8 (2019-) COMPLETE SET CONTAINS:-> Central Rear Splitter Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.  CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

Front Splitter V.2 Audi A6 C8 FITS ONLY: Audi A6 C8 (2019-) COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual Fitting manual: FRONT SPLITTER INSTALLATION MANUAL Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less