Performance - Audi RS3 8V (2012-2020)

TRIPLE QX Purple (G13) (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements TRIPLE QX Purple Ready Mixed Antifreeze/Coolant (G13) 5Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection upto -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements. TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 5Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection up to -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Purple Antifreeze/Coolant (G13) 1Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution.   TRIPLE QX Purple Concentrated Antifreeze/Coolant (G13) 5Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Purple Antifreeze/Coolant (G13) Concentrate 20Ltr Like to have a clean windscreen? Why not buy 20 litres to save you having to keep ordering more! Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

TRIPLE QX Red (Concentrate) Antifreeze/Coolant 1Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard. recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 5Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard, incorporating the latest in Organic Acid Technology (OAT). Recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value. Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 20Ltr Why not buy 20 litres to save you having to keep ordering more! 1 x 20litres of Red Concentrate Antifreeze/Coolant

Read more less

TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 1Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements. TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 5Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 1ltr TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 5ltr Full organic long life coolant, 1-2-Ethanediol based Organic acid technology formula. Ethanediol based coolant, silicate, boron, phosphate, nitrite and amine free, which is a multipurpose long life formulation dedicated to engine which require . Dex-Cool coolant Recommended in engine cooling circuit which needs GM6277M norm   

Read more less

Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our Stage 3 front mount intercooler kit with integrated crash bar design (replaces the stock crash bar) aimed at modified Audi RS3 8V owners who want the very highest level of cooling efficiency, power and performance for track or fast road use. AIRTEC part no: ATINTVAG41 TECHNICAL DATA Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our Stage 3 front mount intercooler kit with integrated crash bar design (replaces the stock crash bar) aimed at modified Audi RS3 8V owners who want the very highest level of cooling efficiency, power and performance for track or fast road use. The finished design features 70mm inlet and outlets that flow freely through custom end tanks into a stepped 100mm to 50mm single-pass core. By integrating the crash bar into the design, the intercooler makes full use of the vehicle’s entire front grille area while still retaining the towing eye feature. It therefore offers a huge 125% increase in surface area and a 108% increase in volume over standard with radically reduces charge temperatures, which is suited for highly modified examples with higher boost pressures and capable of supporting over 500bhp. It fits neatly behind the original bumper and the comprehensive kit includes AIRTEC Motorsport’s replacement bonnet catch, laser-cut brackets and all fixtures and fittings. Its proven cooling efficiency makes it an essential modification for all modified Audi RS3 8S.   Dimensions:OEM intercooler:Width: 640mm Height: 163mm Depth: 80mm Capacity: 8.3 litres Front area: 1,043cm²   AIRTEC Motorsport intercooler:Width: 627mm Height: 375mm Depth: 100mm to 50mm stepped core Capacity: 17.3 litres Front area: 2,351cm²   Features: 108% bigger capacity 125% larger frontal area Proven race quality bar and plate core 70mm inlet and outlets CAD designed end tanks to optimise air flow Comes complete with full fitting instructions Proven power increases and cooling efficiency Towing eye feature retained New bonnet catch supplied Available in Pro Series Black only   Registered Design Right number: 6171871 AIRTEC part no: ATINTVAG41

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

TAKE THE PRESSURE. BEAUTIFUL BILLET REPLACEMENT EXPANSION CAP. Doesn't your pride and joy deserve better than cheap plastic parts in the engine bay?  WHY CHANGE? The RacingLine Coolant Expansion Tank Cap will keep your coolant expansion tank at its perfect pressure to be sure that your high-performance engine’s coolant system is performing exactly as it should.  The cap's a critical part of your car's cooling system to ensure that correct pressure is maintained, and never exceeded. Older, worn stock coolant caps loose the ability to hold correct pressure to keep the coolant at maximum efficiency. This is an engineered, billet replacement coolant cap to replace the cheap plastic one, with sophisticated internal springing and bleed off.  Don’t confuse this RacingLine full replacement cap with other cheap covers - which simply stick on over the plastic cap. We think your car deserves better than that. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC 5-axis technology. Each cap starts life as a solid billet of aerospace-quality 6061 aluminium. Sophisticated internal Japanese-made springing and bleed off mechanism. Polished, then gloss-anodised in stunning Midnight Black to stay beautiful for year after year. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 5 GTI 1.4 TSI 6R 2008-2015 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > VW ID.Buzz 2023+ > VW ID.4 2020+ > VW Amarok 2010-2020 > VW ID.3 2019+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Audi Q5 3.0 TDI II FY 2017+ > Audi Q4 E-tron 20210+ > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Arona 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Cupra Born 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Enyaq 2021+

Read more less

  Prestone Ready To Use Coolant/Antifreeze 1ltr (Can mix with any colour) Prestone Antifreeze is a high quality, universal coolant suitable for various vehicles, cooling systems and can even mix with all existing antifreeze. The Ready to use mixture can be poured straight into an empty, or part filled system. Features:> Prevents overheating during the summer, and avoids freezing during the winter Can be used in ANY Passenger vehicle (Petrol or Diesel) Can be mixed with ANY existing colour antifreeze 5 Year guarantee Prestone 4ltr Ready to use Universal Antifreeze Prestone Antifreeze is a high quality, universal coolant suitable for varius vehicles, cooling systems and can even mix with all existing antifreeze. The Ready to use mixture can be poured straight into an empty, or part filled system. Features: - Prevents overheating during the summer, and avoids freezing during the winter - Can be used in ANY Passenger vehicle (Petrol or Diesel) - Can be mixed with ANY existing colour antifreeze - 5 Year guarantee

Read more less

TRIPLE QX Orange Concentrated Antifreeze/Coolant - 1ltr   TRIPLE QX Orange Concentrated Antifreeze/Coolant - 5ltr  

Read more less

TRIPLE QX Blue Antifreeze/Coolant 1Ltr Our High quality Blue Antifreeze and Coolant has a powerful formula with 2 years protection for all seasons. It is suitable for any vehicle currently using Blue antifreeze / coolant and meets BC6589 (1992) Standard. Awarded BEST BUY by Car Mechanics Magazine based on heat / frost resistance and value for money! Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Blue Antifreeze/Coolant 5Ltr TRIPLE QX Blue Antifreeze/Coolant 20Ltr Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

REVO INTERCOOLER AUDI RS3 8V2 The Revo Intercooler utilises unique design features to lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software. The unique end tank profile promotes internal laminar flow by decreasing turbulence and increasing airspeed into the bar and plate core. This enhances charge air cooling giving you access to more power throughout the rev range. The limitations of the stock intercooler were apparent throughout testing. The stock part consistently struggled to manage charge air temperatures, especially on vehicles with performance software. The Revo Intercooler has been designed to improve on every restrictive element of the stock cooler, enhancing cooling efficiency by lowering intake air temperatures by up to 38ºC vs. the Stock intercooler, allowing you to drive harder, for longer. KEY FEATURES Bar & Plate Core Design Fully Cast End Tanks Reinforced Mounting Brackets Intercooler Pipes Included Up to 53% increase in the frontal surface area Up to 38% increase in core volume Fits with OEM Crash Bar   INCREASED CORE VOLUME The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your power demand. Designed from the ground up, the Revo Intercooler has a 38% larger core volume than the OEM part and offers perfect fitment by Utilising the volume of unused engine bay space behind the OEM (US and ROW) crash bar. INCREASED FRONTAL AREA Due to the custom-designed end tanks, the frontal area of the intercooler has been increased by a massive 53%. Offering the best balance between increased performance and acceptable part clearance, whilst also minimising pressure drop.   END TANK DESIGN The Revo end tank geometry maintains the largest possible cross-sectional flow area to and from the core. With a cast interior surface finish, the Revo end tanks allow air to flow freely without obstructions. The design has been balanced between core width and optimal tank profile design. End tanks play an important part in maintaining pressure and work in harmony with the core to promote airflow, the Revo end tanks are designed to offer the optimal balance between both of these key features.   BAR & PLATE Designed with a bar and plate core to maximise the efficiency of heat transfer, the pressure drop is also controlled as the air meets less resistance compared to that of a tube and fin alternative. The Revo Intercooler also features carefully specified fin geometry to maximise cooling properties while minimising flow restriction. The ambient core side utilises louvred fins to slow ambient airflow which improves heat transfer, while the charge core side features an offset internal fin design to balance surface area and air resistance to minimise pressure drop.   INTERCOOLER PIPE UPGRADE Supplied with an upgraded aluminium charge and silicone throttle pipes. The increased diameter pipework ensures the maximum performance by increasing system volume by over 27%. The internal diameter of each silicone is precisely matched to the outer diameter of the ribbed inlet and outlet connections along with a unique Flush Fit design, allowing a smooth transition between components. RESEARCH AND DEVELOPMENT All Revo products are designed in-house using the latest 3D printing technology, CAD and CFD software. Every product is rigorously tested utilising an in-house Hub dyno and Revo data acquisition software. The Revo intercooler minimises turbulence while maximising heat transfer, promoting cooler air temperatures and low-pressure drop. This helps retains power and torque throughout the rev range as highlighted during controlled Dyno testing. The Revo Intercooler was tested in-house to compare the performance against that of the stock Intercooler. First tested on a vehicle running the OEM Intercooler with Revo software, a Revo carbon series air intake system and Milltek downpipe exhaust, the Revo Intercooler and pipes were then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling. PERFORMANCE DATA Showing the last of four consecutive dyno runs, the efficiency of the Revo Intercooler over the OEM RS3 intercooler is highlighted. With peak gains of +17 HP (hubs) & +43NM Torque, along with increased performance throughout the entire rev range. The stock intercooler struggles to effectively function in comparison to the Revo Intercooler which remained consistent throughout. INLET TEMPERATURE This is a metric used to confirm that testing on the RS3 8v.2 2.5TFSI Intercooler. This is used to show that the air temperatures going into the intercooler were similar for each test, confirming that outlet temperatures shown in the following graphs are purely down to differences in intercooler design/construction. As can be seen, the “dwell” between testing runs is higher with the OE setup vs. Revo. While this initially seems less than desirable for comparable data, this temperature difference is actually down to the thermal mass differences between setups; indicating that the Revo kit can absorb much larger amounts of heat more efficiently than the OE setup, yet the Revo intercooler produced the lower outlet temps proving the cooling efficiency. OUTLET TEMPERATURE This is the main performance metric to illustrate that the Revo intercooler far exceeds the stock unit. A strong indication that the Revo intercooler is extremely resistant to heat soak and could likely continue for ten more sequential dyno runs before any intake temperature-related issues arose. The graph illustrates the increased cooling performance of the Revo intercooler vs RS3 intercooler over all four runs. The Revo Intercooler provided a massive 38.2°C max and 18.23°C average intake air temperature reduction across the six back to back full gear dyno runs. INTERCOOLER PRESSURE DROP GRAPH Pressure drop is an important factor when it comes to choosing an Intercooler. The Revo solution features custom cast end tanks to evenly distribute air over the core. This graph highlights that even with massive core size difference there is only a 0.34psi pressure drop in comparison to the stock intercooler, ensuring engine response and minimised turbo lag     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Audi RS3 2.5TFSI 2017 onwards Audi RS3 2.5TFSI GPF 2019 onwards   Notes: Simple replacement of the OEM part. Compatible with OEM Rest of World and US crash bars.  Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less

AIRTEC Motorsport Universal Oil Cooler Our new range of AIRTEC Motorsport oil coolers are now available to order. These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling. They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections. The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish. Features: High-flow 12-row core Cast mounting points AIRTEC embossed logo Satin black finish Available to suit -8 or -10 AN fittings

Read more less

Freshly developed at AIRTEC HQ in the UK, we’re proud to launch our Stage 3 front mount intercooler kit with integrated crash bar design (replaces the stock crash bar) aimed at modified Audi RS3 8V owners who want the very highest level of cooling efficiency, power and performance for track or fast road use. The finished design features 70mm inlet and outlets that flow freely through custom end tanks into a stepped 100mm to 50mm single-pass core. By integrating the crash bar into the design, the intercooler makes full use of the vehicle’s entire front grille area while still retaining the towing eye feature. It therefore offers a huge 125% increase in surface area and a 108% increase in volume over standard with radically reduces charge temperatures, which is suited for highly modified examples with higher boost pressures and capable of supporting over 500bhp. It fits neatly behind the original bumper and the comprehensive kit includes AIRTEC Motorsport’s replacement bonnet catch, laser-cut brackets and all fixtures and fittings. Its proven cooling efficiency makes it an essential modification for all modified Audi RS3s. Please note: This item does NOT currently fit models with Active Cruise Control (ACC) but it is being developed.  Dimensions:OEM intercooler:Width: 640mm Height: 163mm Depth: 80mm Capacity: 8.3 litres Front area: 1,043cm² AIRTEC Motorsport intercooler:Width: 627mm Height: 375mm Depth: 100mm to 50mm stepped core Capacity: 17.3 litres Front area: 2,351cm²   Features: 108% bigger capacity 125% larger frontal area Proven race quality bar and plate core 70mm inlet and outlets CAD designed end tanks to optimise air flow Comes complete with full fitting instructions Proven power increases and cooling efficiency Towing eye feature retained New bonnet catch supplied Available in Pro Series Black only Registered Design Right number: 6171871 AIRTEC part no: ATINTVAG41

Read more less

APR S-Tronic DSG Gearbox Catch Can Breather System - Audi RS3 8V The Ultimate DQ500 DSG / S Tronic Transmission Catch Can and Breather System is here! The factory transmission features a plastic breather system that allows for transmission fluid expansion and removal of gases. Unfortunately, this system easily becomes taxed, causing transmission fluid to spew all over the engine bay. The APR system fixes this problem through the use of an easy-to-install and compact catch can system. The larger can collects the expanded fluids and allows for venting of trapped gases through a breather filter. The can is larger than stock and fluids enter at an angle to help prevent the fluids from spraying through the breather filter. When possible, the transmission fluid simply drains back into the transmission. Features: Large CNC-machined billet-aluminum catch can Black anodized finish with APR logo Cotton gauze breather filter with APR logo Laser cut and CNC-bent mounting bracket Fluorosilicone lined expansion hose Prevents transmission fluid from spraying all over engine bay Allows trapped gases to escape, as intended by the factory Fluid enters at an angle as to reduce spraying and filter loading Drain back system prevents the need to empty the can

Read more less

  As part of our expanding Audi product range, proud to launch our enlarged cold side pipe kit for the RS3 8V kit for fast road or track use. Designed to match our enlarged turbo elbow, our in-house design engineer team have created an enlarged pipework kit to replace the entire cold side, from the intercooler all the way to the throttle body. From the intercooler, our high-quality Pro Hoses silicone boost hose tapers up from 70mm to maintain 80mm all the way to the elbow, which equates to a 23% increase in comparison to the original pipework. Our AIRTEC Motorsport replacement cast aluminium elbow is nearly 10% bigger than standard and measures 85mm at its widest point, offering a significant improvement in flow and internal capacity. This improves throttle response and reduces restriction, which is key for those chasing increased power from their cars. A direct replacement, the kit also features a CNC-machined throttle spacer that incorporates a meth port, if required.   The kit comes with detailed fitting instructions and the comprehensive package also includes replacement Pro Hoses boost hoses, a new O-ring and all fixtures and fittings required for installation. Finished in powder coated black with a AIRTEC Motorsport cast logo, this uprated cold side kit offers a great benefit for modified RS3 8V owners. Features: Up to 23% increase in internal capacity  Meth port incorporated into machined spacer High-quality cast aluminium construction Pro Hoses silicone connectors Powder coat black finish Direct replacement part  Comprehensive fitting guide included 

Read more less

If your car is fitted with adaptive cruise control, we can additionally supply you with a billet bracket and fixings to enable the relocation of the ACC radar. Simply select the ACC option in the drop down menu above. No re-coding of the unit should be necessary. Following on from our very successful intercooler for the RS3 8P chassis, the Forge intercooler for the RS3 8V chassis builds on our reputation for delivering cores that offer real-world increases in power and temperature drops. Whilst the 8V chassis shares many components with the older 8P, the space available behind the bumper is a different shape and the crash bar has also changed. This required a whole new intercooler and crash bar setup for this latest chassis* The RS3 8V core is a huge 640x250x100 and of bar and plate design. This gives it a huge 55% more surface area than stock, and an even more impressive 94% more volume. The end tanks are made with integrated pipes in order to retain the stock boost hoses, though you can also replace the hoses with our FMKT024 boost hose set if you so wish. Just like on the 8P chassis, we supply a genuine Audi RS3 crash bar which we modify in house in order to accept the new larger core, then finish both the crash bar and core in our standard black crackle finish powder coat for maximum longevity. As shown in the graph above, for both tests we let the car heatsoak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of 36 deg C), then do a dyno pull from there. This gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM. On the standard car we tested on, it made 362bhp completely stock (so largely in line with what Audi quote) with a peak intake temperature of 58°C. With just this intercooler fitted and no other modifications, the same car made 386bhp with a peak inlet temperature of 23°C, a gain of 24bhp and a drop of 35°C. Gains on mapped cars will likely be even more impressive as the stock intercooler core really starts to struggle on stage 1 mapped cars. The kit contains full instructions for installation, which should take around 3.5 hours, and a complete kit which includes everything needed. The above dyno graph shows a Forge customer making gains of 52HP with this intercooler  5 / 5 stars - “In short, this product does what it states!” Working with Litchfield and their Technical Partners (Forge) I have conducted extensive testing to support the development of Litchfield tuning packages for the Audi RS3 8V. Whilst the OEM intercooler is “OK”, very rapidly on repeated road and dyno Wide Open Throttle (WOT) sweeps, the air charge temps quickly rise to levels that impact performance (pulling ignition). To extract the full potential out of the tuning packages and increase repeatability of results and improve overall reliability, I turned to Forge and their upgraded front mount intercooler. Not one for just using a product because of “sales speak”, I extensively tested the Forge offering. The conclusion based on the data logging, mapping and final results was clear. Monitoring charge temps with back to back tests instantly showed us that the cooling efficiency with the Forge product was significantly better. Comparing OEM intercooler charge temps for the coolest first run, against the Forge intercooler on it’s third repeated back to back run (really pushing this comparison with heat soak), the Forge intercooler saw a drop of 18degs peak over the OEM unit (on it’s coolest run with no heat soak). Repeated runs on the OEM intercooler saw the difference widen even more by up to 34degs higher (peak) than the Forge intercooler. Repeated runs between the OEM and Forge intercooler (all completed on the same day) saw the following peak values: OEM - 60degs Forge - 26degs The Forge intercooler also held the lowest charge temperature for longer. This sounds all fine and dandy but what does all this mean in relation to performance? First off Litchfield was able to develop their ECU calibrations without needing to worry about charge temperatures impacting performance. The car spent many hours on the dyno and completed many back to back runs. Over 30 different calibrations were created and tested. Not once did Litchfield need to let the car cool down between runs. The end result was a solid and repeatable 450+bhp achieved with only their ECU calibration, Forge Intercooler and secondary cat removal. Recently (March 2017), the car at this level of modification (Litchfield Stage 2) achieved a stonking 11.5s @ 118+mph quarter mile run at Santa Pod. This is the quickest time that we are aware of in the UK, for an RS3 8V at this level of modification using normal pump fuel, no weight reduction and on stock tyres. The car also achieved the 60mph sprint in 3.2s, the 100mph sprint in 7.9s and 100-200kmh sprint in 8.9s on this same run. I look forward to seeing how the Forge intercooler will complement Stage 3 development. Watch this space!   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

FMKT024 – Audi RS3 (8V chassis), and Audi TTRS (8S) A set of four boost hoses and air box coupler hose for the Audi RS3 and Audi TTRS - Please note the airbox hose (centre of the kit image) does not fit the DNWA and DAZA engine codes. This hose kit includes the intercooler inlet and outlet hoses (two largest hoses seen in the kit image), throttle body hose located at feed into alloy inlet manifold elbow (straight reducer seen in the kit image), and turbo outlet hose (two smallest hoses in the kit image, one being an alternative for the facelift 8V models). The Forge silicone hoses in this kit are Fluorosilicone lined to prevent oil vapour penetration throughout the inner hose wall. Fluorosilicone lining also renders the kit suitable to be used with either modern long-life coolants or Organic Acid Technology coolants (O.A.T.). The use of a Fluorosilicone lining ensures that Forge silicone hoses are the clear market leader. This durable Forge Motorsport silicone hose kit has been designed to withstand pressures experienced in both tuned and remapped Audi RS3 and TTRS engines, long outlasting the original hoses. This high quality hose kit is covered by the limited lifetime Forge Motorsport warranty, keeping you on the road and ahead of the pack! This set of hoses is available in red, blue or black finish, an added aesthetic option for this high quality hose kit. *T&C's Apply     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

TECHNICAL DATA AIRTEC have now released our latest intercooler for the AUDI RS3 8V. We take a huge amount of pride in making sure our kits are finished to an extremely high standard. AIRTEC Front mount Intercooler kit includes these parts & features 1 x huge 100mm core intercooler Powder coated standard intercooler support brackets No cutting to bumper Fitting instructions and all required fixings Un-Beatable value for money Proven power increases for fast road & track Available in Pro-Series Black AIRTEC 3 year unlimited mileage warranty Fitting will take 2-3 hours depending on mechanical skill Options: Option 1: Without optional crash bar – Requires existing crash bar to be cut and welded. Can be supplied with laser-cut plate and template. Option 2: With crash bar – New crash bar comes powder coated and pre-cut ready to fit – (Please add £354) Capacity intercooler – 7.97 Litres PLEASE NOTE: This intercooler will NOT fit cars with adaptive cruise control. Silver for illustration purposes only. Registered Design Right number: 6022631 Approximate dimensions: W100 mm/L650mm/H250 mm AIRTEC part number: ATINTVAG18

Read more less