Performance - Audi S3 8V (2012-2020)

Density Line Drivetrain Mounts are engineered with performance in mind, and provide an OEM+ driving experience without sacrificing comfort. Density Line Mounts are void-free and fluid-free, and manufactured from high-durometer rubber to significantly improve performance and longevity over factory mounts. By eliminating the slop associated with the stock mounts, the Density Line Mounts reduce wheel hop, improve response, and offer a more direct, connected driving experience. Street Density:The Street Density Engine Mount Pair is manufactured from 50 durometer and 60 durometer rubber, which is approximately 25% stiffer than stock. Since the mounts are also void-free and solid-filled, the resulting is a substantial reduction in drivetrain movement versus the factory mounts.The result is greatly reduced drivetrain slop, crisper shifting, and minimal wheel hop, without any significant increase in noise, vibration, or harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts. Features: Manufactured from 50 Durometer & 60 Durometer (Street Density) Rubber with Void-Free Construction Reduced Drivetrain Slop Decreased Engine Movement Under Load More Direct Power Transfer Improved Shifting Feel Complete Drop-In Replacement of Factory Engine/Transmission Mounts Sold in Pairs (One Engine Mount & One Transmission Mount) Fitment: 2014+ Audi A3/S3 (8V - MQB) 2015+ Audi TT/TTS (MkIII - MQB) 2015+ Volkswagen Golf/GTI/ R (MkVII - MQB) 2013+ SEAT Leon Cupra / Cupra 280/290/300 2013+ Octavia vRS 220/230

Read more less

034Motorsport is pleased to introduce the P34 Performance Air Intake System for 1.8T / 2.0T EA888 Gen3 MQB Vehicles 034Motorsport’s engineers invested significant effort in developing a comprehensive performance intake solution for Audi/Volkswagen EA888 1.8T/2.0T Gen 3 engines, which provides noticeable gains in horsepower and torque over the factory airbox. Throughout the development process, multiple designs were modeled, prototyped, and tested, to ensure that the P34 Air Intake System delivers measurable performance benefits and excellent fitment. OPTIMIZING AIRFLOW 034Motorsport engineers started by identifying the shortcomings of the factory intake system to determine which components restricted airflow to the turbocharger inlet. While the factory lower airbox and fresh air duct to the core support were more than sufficient for increased power levels, the factory air filter, upper airbox, and turbo inlet tube were deemed too restrictive, even with the factory turbocharger034Motorsport's mechanical engineers scanned the factory engine bay and modeled a one-piece unit to replace the factory intake tube and upper airbox. By eliminating the multiple couplers, transitions, and jagged features in the factory upper airbox and intake tube, 034Motorsport's engineering team was able to drastically reduce turbulence in the intake tract, and virtually eliminate pressure drop in the intake system before the turbo inlet. Multiple iterations were prototyped in plastic using 034Motorsport's in-house FDM 3D printer and thoroughly tested. Ultimately, the best-performing design was a fully-enclosed unit featuring a large-diameter one-piece intake tube with smooth transitions all the way back to the factory turbo inlet. TRUE COLD AIR INTAKE To ensure that the P34 Air Intake System draws in cool, dense air, 034Motorsport engineers opted for an enclosed design to prevent hot air from the engine bay entering the intake tract. By bolting to the factory lower airbox, this approach allows the enclosed high-flow panel filter to breathe fresh, cold air from the factory inlet duct before the radiator. PERFORMANCE AIR FILTERHe 034Motorsport P34 Air Intake System Houses A High-Flow Panel Filter With Double-Layer Pleated Cotton Filtration Medium. This Air Filter Design Offers Increased Flow And Excellent Filtration. OEM+ FIT & FINISH 034Motorsport carefully selected the textured finish of the intake tube and upper airbox heat shield to complement the factory plastic trim and engine covers. The 034Motorsport MQB Audi/Volkswagen 1.8T/2.0T Cold Air Intake System was designed to fit like a factory part, and mates directly to the turbo inlet pipe and factory lower airbox to provide an OEM+ look. DYNO-VERIFIED WHEEL HORSEPOWER & TORQUE GAINS 034Motorsport's engineering and development efforts were validated using our Mustang AWD Dynamometer to ensure that the P34 Cold Air Intake System provided substantial, repeatable increases in horsepower and torque.  Peak Wheel Horsepower & Torque on Stage 1 2015 Volkswagen GTI: Stock Intake: 223 Wheel Horsepower / 285 Wheel Foot-Pounds of Torque P34 Intake: 240 Wheel Horsepower / 297 Wheel Foot-Pounds of Torque Peak Horsepower Gain: 10 WHP @ 6,100 RPM Peak Torque Gain: 12 WTQ @ 3,100 RPM See Dyno Chart PRODUCT FEATURES & DETAILS Features: Developed In-House by 034Motorsport's Engineering Team One-Piece Design with High-Quality Construction OEM+ Fit & Finish Retains Factory Lower Airbox & Inlet Duct Fully-Enclosed Design with Pleated Cotton Panel Air Filter Large-Diameter CFD-Optimized Air Intake Tube Dyno-Proven Horsepower & Torque Gains Increased Engine & Induction Sounds Improved Throttle Response Compatable with SAI Equipped & Non-SAI Equipped Vehicles Simple, Straightforward Installation What's Included: 034Motorsport P34 MQB Air Intake System 034Motorsport High-Flow Panel Air Filter Integrated SAI Adapter Fitting Silicone Turbo Inlet Coupler & Hose Clamps

Read more less

034Motorsport is pleased to present Billet Aluminum MQB Rear Subframe Mount Inserts for the MkVII Volkswagen Golf R & 8V Audi A3/S3 Quattro!MQB Audi/Volkswagen vehicles equipped with Haldex AWD use rubber rear subframe mounts which deflect under load, causing the rear end to feel vague and loose, as well as leading to less-than-optimal suspension geometry and increased understeer. These precision-machined billet aluminum inserts are designed to fill voids in the factory rear subframe mounts, and limit subframe movement without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. The result is a more refined, connected driving experience, as well as improved effectiveness of aftermarket rear sway bar upgrades and suspension components.Designed to work in conjunction with the factory rubber mounts, this insert package was engineered using CAD software and thoroughly tested and refined to provide a significant improvement in handling performance and feel.These inserts were tested extensively by 034Motorsport and independent Audi/Volkswagen enthusiasts before release on new MQB chassis AWD vehicles. Installation is very simple, can be performed in under an hour, and is completely reversible.Features: T6-6061 Billet Aluminum Construction CNC-Machined In-House Clear Anodized Finish for Durability Engineered to Fill Voids In Factory Rear Subframe Mounts Helps Maintain Proper Suspension Geometry When Cornering Reduces Rear Subframe Movement During Launches & Acceleration Improves Shifting Feel, Resulting in Crisper Shifts Virtually No Additional NVH Transfer Inside Cabin Easy, Straightforward Installation What's Included: 034Motorsport Billet Aluminum MQB AWD Rear Subframe Insert - Front (Pair) 034Motorsport Billet Aluminum MQB AWD Rear Subframe Insert - Rear (Pair) Installation Instructions: PDF Fitment: 2015 - Present Audi A3/S3 Quattro (8V - MQB) 2015 - Present Volkswagen Golf R (MkVII - MQB) Please Note: The factory rear subframe bolts are torque-to-yield bolts, and we recommend replacing them when installing these inserts. A new set of four OEM bolts is available separately.

Read more less

034Motorsport's Motorsport TrackSport Mounts for Audi 8V/8V.5 A3/S3 8S TT/TTS and VW Mk7 Golf/GTI/R models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for. Motorsport TrackSport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine/transmission mounts, and are designed to be completely rebuildable with replaceable Density Line rubber bushings. These extreme-duty mounts will increase noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts. HIGH-DUROMETER RUBBER VS. POLYURETHANE: Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings. Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Racing and Extreme Performance Applications Great Solution for Highly-Tuned Stock Turbo and Big Turbo Power Levels Replaceable 65 Durometer Density Line Rubber Bushings with Void-Free Construction Virtually Indestructible Lifetime Warranty Reduced Drivetrain Slop Decreased Engine Movement Under Load More Direct Power Transfer Improved Shifting Feel Complete Drop-In Replacement of Factory Engine/Transmission Mounts Sold in Pairs NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure.

Read more less

The Motorsport Line StreetSport Motor Mount Retrofit Kit for the Audi/VW MQB chassis is designed to convert your existing TrackSport Motor Mounts into StreetSport Motor Mounts. These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is only slightly higher than stock. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Converts TrackSport Mounts to StreetSport Mounts to Lower NVH Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Performance Applications Great Solution for Highly-Tuned Stock Turbo Power Levels Replaceable 50 Durometer Density Line Rubber Bushings with Void-Free Construction Significantly Less NVH than TrackSport Versions Virtually Indestructible Lifetime Warranty Updates One Set of Engine/Transmission HARDWARE REQUIREMENTS: This product is intended to be used in conjunction with one of the following products. The mount bases of the kits shown below are swapped with the mount bases in this kit, resulting in the same spec as our StreetSport mounts. 034-509-5028 - Motorsport Line TrackSport Motor Mount Pair for Audi 8V/8V.5 A3/S3, 8S TT/TTS, and VW MkVII Golf/GTI/R 034-509-5030 - Motorsport Line TrackSport Motor Mount Pair for Audi 8V.5 RS3 and 8S TTRS EVO DAZA NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure.

Read more less

034Motorsport's Motorsport StreetSport Mounts for Audi 8V/8V.5 A3/S3 8S TT/TTS and VW Mk7 Golf/GTI/R models are the new standard in ultra-high performance. These mounts are designed with extreme performance in mind, manufactured from billet aluminum and high-durometer rubber, making them virtually indestructible, while maintaining better ride characteristics than polyurethane alternatives. These mounts have a lifetime guarantee regardless of power level applied and type of track racing they are used for. Motorsport StreetSport Mounts are void-free and fluid-free, eliminating the slop associated with the factory engine/transmission mounts, and are designed to be completely rebuildable with replaceable Density Line rubber bushings. These heavy-duty mounts will result in a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin, as they are designed to drastically reduce engine movement compared to the factory parts, but will introduce less NVH than our TrackSport mounts due to the lower-durometer rubber used. Additional NVH is most noticeable at idle, but once the vehicle is moving, NVH is slightly higher than stock. HIGH-DUROMETER RUBBER VS. POLYURETHANE: Density Line Mounts are manufactured from high-durometer rubber instead of polyurethane for a number of reasons. While vulcanized rubber mounts are more expensive to prototype due to increased complexity of manufacturing and high initial tooling costs, rubber is inherently better than polyurethane as a damping medium for mounts and bushings. Rubber is able to deal with stress under both tension and compression, while polyurethane mounts rely on the damping medium to be effective only under compression. Rubber is also excellent in shear, where polyurethane is ineffective, making it ideal for applications that apply a shear force to the bushing during articulation. Rubber does not pack and wear like polyurethane does, which ultimately results in a long-lasting part with consistent performance. BUYER'S GUIDE: The following guide is designed to help customers choose which mount best meets their specific needs. StreetSport    TrackSport Power levels exceeding Stage 1    Power levels exceeding conventional stages Car is launched or taken to HPDE or Drag events    Car is heavily launched at drag strips or only used for track events Car is used on road as a commuter    Ultimate performance and rigidity is desired  Less NVH is desired    "Where we're going, we don't care about NVH!"    FEATURES: Manufactured from 6061-T6 Billet Aluminum Anodized for Long Life and Great Looks Extreme-Duty for the Most Punishing Performance Applications Great Solution for Highly-Tuned Stock Turbo Power Levels Replaceable 50 Durometer Density Line Rubber Bushings with Void-Free Construction Significantly Less NVH than TrackSport Version Virtually Indestructible Lifetime Warranty Reduced Drivetrain Slop Decreased Engine Movement Under Load More Direct Power Transfer Improved Shifting Feel Complete Drop-In Replacement of Factory Engine/Transmission Mounts Sold in Pairs NOTES: Lifetime warranty covers replacing Density Line rubber bushings should they ever wear out, and replacement of any billet aluminum component in the unlikely event of a failure.

Read more less

MORE CAMBER, MORE GRIP 034Motorsport's Dynamic+ Camber Mounts are engineered to significantly improve handling performance for MkVII Volkswagen Golf/GTI/Golf R & 8V/8S Audi A3/S3/RS3, TT/TTS/TTRS models. Designed as a true drop-in upgrade, the Dynamic+ Camber Mount Pair provides an additional 1.4 degrees of negative camber at each of the front wheels to improve both turn in and cornering grip. Most importantly, Dynamic+ Camber Mounts provide a fixed camber increase without the cost, noise, and complexity of adjustable camber plates. Dynamic+ Camber Mounts are the ideal solution for enthusiasts in search of enhanced handling performance, confidence-inspiring grip, and precise steering response. Equally well-suited for the street and track, Dynamic+ Camber Mounts deliver a perfect balance of performance, durability, and comfort.   DYNAMIC+ CAMBER MOUNT BENEFITS Revamped Suspension Geometry for Performance Driving Additional 1.4 Degrees of Negative Camber at Each Front Wheel (Compared to Factory Strut Mounts) Significantly Enhanced Grip When Cornering Improved Steering Feel & Handling Response Reduced Strut Mount Deflection to Maintain Proper Strut Alignment Under Cornering Load Significantly Reduced NVH (Noise, Vibration, Harshness) Increase Compared to Spherical Camber Plates Billet Aluminum Construction with Replaceable Density Line Rubber Inner Pucks Learn More   Dynamic+ Camber Mounts are machined from 6061-T6 Aluminum and feature 75 Durometer Density Line Rubber center pucks to minimize strut shaft deflection, while simultaneously preventing unwanted noise, vibration, or harshness (NVH) from being transmitted into the cabin. The Dynamic+ Camber Mount Pair is fully rebuildable, and includes new high-grade strut mount bolts for installation. These mounts will also eliminate the annoying "squeaking" sound often caused by the stock strut mounts when paired with coilover suspensions. Dynamic+ Camber Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts. Dynamic+ Camber Mounts were tested extensively on the street and at the track with multiple 034Motorsport Development Vehicles before release to ensure that they deliver excellent performance and durability. FEATURES & FITMENT Features: Complete Drop-In Replacements for Factory Strut Mounts CNC-Machined from 6061-T6 Aluminum with Clear Anodized Finish Proprietary 75 Durometer Rubber Inner Pucks Durable, Rebuildable Design Sold in Pairs - New High-Grade Strut Mount Bolts Included Fitment: VW Golf Mk7 Audi A3 / S3 8V SEAT Leon Mk3 Skoda Octavia Mk3 INSTALLATION & WARRANTY Installation Guide: Click Here! Replaces: 5Q0 412 331D  5Q0412331D Warranty: 1 Year Limited Replacement Warranty (If you encounter any issues with our products outside of the warranty period, we will work with you to provide a resolution.)

Read more less

034Motorsport is proud to offer the ultimate rear sway bar upgrade for the MkVII Volkswagen Golf R & 8V Audi A3/S3 Quattro! The 034Motorsport Adjustable Solid Rear Sway Bar is made from a single piece of high-quality, 22.2mm thick spring steel for maximum rigidity, and is designed to combat understeer while reducing body roll under hard cornering. This product was tested thoroughly on the street and track on 034Motorsport's 2016 Audi S3 Development Vehicle and multiple enthusiast-owned MQB Audi/Volkswagen vehicles before release. The 034Motorsport Adjustable Solid Rear Sway Bar substantially reduces understeer and body roll on 8V Audi A3/S3 Quattro & MkVII Volkswagen Golf R vehicles without compromising comfort on the street. In addition, the 034Motorsport MQB Rear Sway Bar is engineered to be used effectively with the stock front sway bar. No upgrade in the front is required. The addition of a stiffer front bar can positively affect turn-in feel, but ultimately worsens the platform's tendency to understeer. With the stock front sway bar and upgraded 034Motorsport Solid Rear Sway Bar, body roll is virtually eliminated while turn in and off throttle oversteer are greatly improved. Features:• 22.2mm Diameter• Solid Spring Steel Construction• One-Piece Design• 2-Way AdjustableWhat's Included:• 034Motorsport 8V Audi A3/S3 Quattro & Volkswagen Golf R (MQB) Adjustable Solid Rear Sway Bar• Polyurethane Sway Bar Bushings• Billet Aluminum Sway Bar Brackets with Integrated Zerk Fittings• Sway Bar Bracket Installation Hardware Kit• Sway Bar End Link to Sway Bar Hardware KitFitment:• 2015 - Present Audi A3/S3 Quattro (8V - MQB)• 2015 - Present Volkswagen Golf R (MkVII - MQB)Sway Bar Rate Data:• 034Motorsport (Soft) - 37% Rate Increase vs. Factory Audi S3 (22mm) Hollow RSB• 034Motorsport (Stiff) - 52% Rate Increase vs. Factory Audi S3 (22mm) Hollow RSB

Read more less

Replace your flimsy, imprecise OEM sway bar end links with these performance engineered adjustable Dynamic+ Adjustable Rear Sway Bar End Links from 034Motorsport! 034Motorsport's Dynamic+ Adjustable Rear Sway Bar End Links allow for uncompromised transfer of suspension movement to the sway bar, and are adjustable in length, allowing you to eliminate preload on the sway bar. 034Motorsport Dynamic+ Adjustable Rear Sway Bar End Links use high-misalignment ball joints, ensuring that the end links do not bind as the suspension articulates. The asymmetrical design of the lower bushing allows the end link to maintain proper vertical geometry in both the soft and firm positions on the sway bar. The threaded shaft diameter has also been maximized for increased strength. This 034Motorsport Dynamic+ Adjustable Rear Sway Bar End Link Kit has the features, performance, and maintenance-free operation to make it a winner on the street and the track! Features: Performance Adjustable Sway Bar End Links Utilizing Heavy Duty Ball Joints Offset Spacer Keeps End Link Vertical When Changing Stiffness Setting of Sway Bar Zinc Plated Steel Ball Joints Maximized Diameter of Threads into End Link Shaft for Increased Strength OEM+ Quality with Adjustability Will Not Break Like the OE Plastic End Links Quieter with Less Maintenance than Spherical Motorsport End Links +/- 5mm of Adjustability (10mm Total Adjustment Range) Direct Drop-In Replacement for Factory End Links Sold In Pairs Functions: Adjust Sway Bar Preload - Essential When Corner Balancing Lowered Vehicles Increased Strength for Stiffer Sway Bars, Heavier Loads and Aggressive Use Improved Sway Bar Reaction Time & Accuracy Fitment: 2015 - Present Audi A3/S3/RS3 (8V/8V.5 - MQB) 2016 - Present Audi TT/TTS/TTRS (MkIII - MQB) 2015 - Present Volkswagen Golf/GTI/ R (MkVII - MQB)

Read more less

034Motorsport's Carbon Fiber Fresh Air Duct is now available for the 8V/8S Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R! Designed to better route cool, dense air from the front of the car to the airbox. This high-quality carbon fiber piece offers OEM+ fit and finish, and is the perfect match for your X34 MQB Air Intake. Unlike the factory plastic air duct, the 034Motorsport Carbon Fiber Fresh Air Duct provides a smooth, direct path for air to enter the airbox from behind the factory grille. In addition to allowing for more airflow to the factory airbox, the Carbon Fiber MQB Fresh Air Duct also yields a noticeable improvement in induction and turbocharger sounds. Features: High Quality Carbon Fiber Construction OEM+ Fit & Finish Improves Airflow from Front of Vehicle to Airbox Eliminates Factory Plastic Blockoff at Core Support Increases Induction & Turbocharger Sounds Offers Simple, Bolt-In Installation What's Included: 034Motorsport Carbon Fiber Fresh Air Duct Self-Adhesive Coolant Hose Clamps (Set of 2) Installation Instructions: Click Here!

Read more less

We're proud to announce the availability of the 034Motorsport Billet Aluminum Shifter Bracket Bushing Kit for transverse Audi & Volkswagen vehicles with manual transmissions! Designed to improve shift quality and precision, these clear-anodized aluminum bushings prevent unwanted deflection caused by the factory rubber parts. Features:Manufactured from T6-6061 Billet AluminumImproved Shifting Feel & AccuracyComplete Drop-In Replacement of Factory Rubber Bushings Replaces:357 711 798/ 3577117981J0 711 795/ 1J0711795 Fitment:1996 - 2003 Audi A3/S3 (8L)1998 - 2006 Audi TT (8N)1999 - 2005 Volkswagen Golf / GLI / GTI / Jetta / New Beetle (MkIV)2006 - 2013 Audi A3 (8P)2006 - 2013 Audi TT / TTS / TTRS (8J)2005 - 2009 Volkswagen Eos / GLI / GTI / Jetta / R32 / Rabbit (MkV)2010 - 2013 Volkswagen Eos / GLI / Golf / GTI / Jetta / R (MkVI)2014 - Present Audi A3 (8V)2014 - PresentVolkswagen GLI / Golf / GTI / Jetta / R (MkVII) NOTES:Shifter Bracket pictured is not included with the product. These are NOT for the shifter linkage cables. 

Read more less

The 034Motorsport MQB Upper Dogbone Mount Insert (patent pending) is required for any MQB platform MkVII Volkswagen Golf/GTI/R, 8V/8V.5 Audi A3/S3/RS3 & MkIII Audi TT/TTS/TTRS using an aftermarket dogbone mount and lower dogbone mount insert.Aggressive driving that causes violent drivetrain movement, such as burn-outs and wheel-hop, will cause the upper and lower dogbone mount assembly to exert a bending moment on the dogbone mount arm, causing it to bend, and in some cases fail.When this failure occurs, the bottom of the engine is unconstrained and the engine will cause damage to other components in the engine bay. The 034Motorsport MQB Upper Dogbone Mount Insert eliminates these bending forces, allowing the dogbone mount to perform flawlessly during these violent events.Installation: To install, you will need to remove the pendulum mount and undo the front anti-roll bar mounting bolts in order to lift the anti-roll bar out of the way. The upper dogbone mount insert then simply slides in position from the top. Once the 'window' area is aligned, the anti-roll bar can then be bolted back in position and the pendulum mount re-fitted. CLICK HERE FOR INSTALLATION INSTRUCTIONS

Read more less