Performance - BMW 3 Series E90 / E91 / E92 / E93 (2005-2014)

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!

Read more less

High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!  

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

  As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our uprated exhaust hanger brace for the E90, E92 and E93 M3 models.  Made from 4mm high-quality aluminium that’s laser cut for the perfect fitment, these direct replacement braces offer improved rigidity and will not corrode like the originals tend to.  Finished in anodised black, fitting takes just 30 minutes and it is supplied with installation instructions.  Fitment: Replaces BMW part number 18211436309E90/E92/E93 M3E46 M3 (requires two)  Features: Made from 4mm high-quality aluminium  Laser cut for perfect fitment  Finished in anodised black  Direct replacement for original  Fitted in 30 minutes  Installation instructions include

Read more less

Fits E92 Coupe - Diesel Engine only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 320D performance exhaust is made in 2.5"/63.5mm pipework and fits from the centre section backwards replacing the rear section. Tailpipes - YTP10L - Twin 3" (76.19mm). All relevant fittings and gaskets are supplied. This exhaust will fit both the SE and M Sport bumpers. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Media Example of BMW 320D sports exhaust (rear section).

Read more less

Fits - E90 Saloon 2005-2011 & E91 Estate models 2007-2011 Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These BMW 320D performance exhausts are made in 2.5"/63.5mm pipework and fit from the centre section backwards replacing the rear section. Tailpipes - YTP10L - Twin 3" (76.19mm). All relevant fittings and gaskets are supplied. This performance exhaust will fit both the SE and M Sport bumpers. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Media Example of BMW 320D Sports exhaust (BM66).

Read more less

Fits E92 Coupe & E91 Estate 2007-2011 Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW 320D performance exhaust is made in 2.5"/63.5mm pipework and fits from the centre section backwards replacing the standard rear section with dual exit tailpipes. Tailpipes - TP04 - Twin 3.5" (88.9mm). All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. This exhaust will only fit with the M-Sport bumper and 335M sport lower rear panel, available from your local BMW dealer. Press Release Cobra Sport has now included the BMW 320D E92 Coupe & E91 Estate to their ever popular range of dual conversions. For those who seek to achieve a more aggressive and sporty look to the rear end of their 320D without upgrading to the 335, Cobra Sport now offer a rear box section which makes a bold statement on the model. Matt Thomas, Cobra Sport's Sales Manager says "I'm seeing a growing trend of people wanting to achieve the look of the more discernible 335's dual exit exhaust on their more economical 2.0 diesel model, and our range of cosmetic upgrades allows them to achieve this." Available separately from your local BMW dealer to complement the system is the original equipment 335 rear bumper panel in which the dual exhaust neatly sits, you would never know that the upgrade had been made as it looks entirely at home on the 320D features and body line. Media Example of BMW 320D rear exhaust section.

Read more less

Fits - E90 Saloon, E92 Coupe and E93 Cabriolet Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This BMW M3 performance exhaust is made in 2.5"/63.5mm bore pipework and fits from the manifolds to the rear sections. The de-cat exhaust version is sold for motorsport and off road use only worldwide. The sports catalyst version replaces a factory emissions device and is not EC homologated. This may not meet current emission laws for road use in your territory.  All relevant fittings and gaskets are supplied. Press Release Delivering an even harder performance edge to BMW's brilliant M3 is the new Cobra Sport performance exhaust with staggering increases in power and torque respectively. Cobra Sport's Sales Manager, Matt Thomas says, "The BMW M3 continues to delight drivers with its superb all-round performance and the Cobra Sports objective has been to further enhance this what is a totally involving driving experience on both road and track. Firstly, The Cobra Sport Research and Development team wanted to give the exhaust a new look by providing tailpipes options of both 3" and 3.5", in both the new matt black style or the usual clean cut polished look. Then concentrated on the design of the silencer, both the internals and the overall look from the rear end of the car, while increasing the pipework diameter to 2.5" (63.5mm). This proved to be a challenge as this BMW V8 engine has some serious bass to overcome with the exhaust, the main objective was to eliminate the nasty drone at motorway speeds, while trying to release the right amount of V8 sound when being opened up. After spending many days on this project (and losing a little more hair in the interim!), they did achieve what was set out to be accomplished and the results are amazing... Anyone who is seriously interested in the power output of their M3, or wants to enhance the V8 engine sound simply cannot overlook the Cobra Sport system when selecting a performance exhaust. Great sound comes as standard with Cobra Sport. The unbelievable sound quality is pitch perfect for this engine, behind the wheel or on the start line. Yet under load, part throttle or idle the volume is both subtle, and sporty. Media Example of BMW M3 Sports Exhaust (rear boxes only). Example of BMW M3 Sports Exhaust (sports cats & rear boxes).

Read more less

Fits - E90 Saloon - Diesel engine only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These BMW 320D performance exhausts are made in 2.5"/63.5mm pipework and fit from the centre section backwards replacing the standard rear section with dual exit tailpipes. Tailpipes - TP04 - Twin 3.5" (88.9mm). This exhaust will only fit with the M-Sport bumper and 335M sport lower rear panel, available from your local BMW dealer. All relevant fittings and gaskets are supplied. Note - The original pipework will have to be cut to enable this exhaust to fit the vehicle. Press Release Cobra Sport has now included the BMW 320D E90 Saloon to their ever popular range of dual conversions. For those who seek to achieve a more aggressive and sporty look to the rear end of their 320D without upgrading to the 335, Cobra Sport now offer a rear box section which makes a bold statement on the model. Matt Thomas, Cobra Sport's Sales Manager says "We're seeing a growing trend of people wanting to achieve the look of the more discernible 335's dual exit exhaust on their more economical 2.0 diesel model, and our range of cosmetic upgrades allows them to achieve this." Available separately from your local BMW dealer to complement the system is the original equipment 335 rear bumper panel in which the dual exhaust neatly sits, you would never know that the upgrade had been made as it looks entirely at home on the 320D features and body line. Media Example of BMW 320D Sports exhaust (BM62).

Read more less

Fits - E90 Saloon, E92 Coupe and E93 Cabriolet models Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These performance exhausts are made in 2.5"/63.5mm pipework and fit from the centre section backwards replacing the rear section. All relevant fittings are supplied. Press Release Delivering an even harder performance edge to BMW's brilliant M3 is the new Cobra Sport performance exhaust with staggering increases in power and torque respectively. Cobra Sport's Sales Manager, Matt Thomas says, "The BMW M3 continues to delight drivers with its superb all-round performance and the Cobra Sports objective has been to further enhance this what is a totally involving driving experience on both road and track. Firstly, The Cobra Sport Research and Development team wanted to give the exhaust a new look by providing tailpipes options of both 3" and 3.5", in both the new matt black style or the usual clean cut polished look. Then concentrated on the design of the silencer, both the internals and the overall look from the rear end of the car, while increasing the pipework diameter to 2.5" (63.5mm). This proved to be a challenge as this BMW V8 engine has some serious bass to overcome with the exhaust, the main objective was to eliminate the nasty drone at motorway speeds, while trying to release the right amount of V8 sound when being opened up. After spending many days on this project (and losing a little more hair in the interim!), they did achieve what was set out to be accomplished and the results are amazing... Anyone who is seriously interested in the power output of their M3, or wants to enhance the V8 engine sound simply cannot overlook the Cobra Sport system when selecting a performance exhaust. Great sound comes as standard with Cobra Sport. The unbelievable sound quality is pitch perfect for this engine, behind the wheel or on the start line. Yet under load, part throttle or idle the volume is both subtle, and sporty. Media Files Example of BMW M3 E92 Sports Exhaust (rear boxes only). Example of BMW M3 E92 Sports Exhaust (sports cats & rear boxes).

Read more less

 FITS: BMW 3 Series E92 M3 4.0 V8 Coupé 2007 to 2013 BMW 3 Series E90 M3 4.0 V8 Saloon / Sedan 2007 to 2011 BMW 3 Series E93 M3 4.0 V8 Convertible 2007 to 2013 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. FITS: BMW 3 Series E92 M3 4.0 V8 Coupé 2007 to 2013 BMW 3 Series E90 M3 4.0 V8 Saloon / Sedan 2007 to 2011 BMW 3 Series E93 M3 4.0 V8 Convertible 2007 to 2013 NOTES: For Milltek Sport Cat Back Systems Only Requires a stage 2 ECU remap. Lambda wiring requires to be extended Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Scorpion Exhausts BMW E90, E91, E92 325/328/330 Rear silencer only Fits Years 2007 to 2013 Fits to OEM / Scorpion Pipe Diameter 63.5mm/2.5 BMW really came to be recognised as producers of performance saloons after the formation of their famous M Division in the 1970’s and a real game changer for them was the launch of the E30 M3 in 1986 which went on to gain numerous championship victories in touring car racing. One of the first exhausts Scorpion developed was their own performance exhaust for the E30 M3 and at the same time Scorpion introduced the legendary DTM tailpipe to the UK market. Ever since Scorpion has been at the forefront of producing performance exhausts for BMW’s M cars and numerous others. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SBM064M Product Type Rear Silencer Fitment Years 2007 - 2013 Fits To OEM / Scorpion Pipe Diameter 63.5mm/2.5" * Tailpipe Monaco Tailpipe Diameter 90 x 76mm Shipping Dimensions 119cm x 60cm x 28cm

Read more less

Scorpion Exhausts BMW E90, E91, E92 325/328/330 Cat-back System Fits Years 2006 to 2007 Fits to OEM / Scorpion Pipe Diameter 63.5mm/2.5 BMW really came to be recognised as producers of performance saloons after the formation of their famous M Division in the 1970’s and a real game changer for them was the launch of the E30 M3 in 1986 which went on to gain numerous championship victories in touring car racing. One of the first exhausts Scorpion developed was their own performance exhaust for the E30 M3 and at the same time Scorpion introduced the legendary DTM tailpipe to the UK market. Ever since Scorpion has been at the forefront of producing performance exhausts for BMW’s M cars and numerous others. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SBM061M Product Type Cat-Back Resonated Resonated Fitment Years 2006 - 2007 Fits To OEM / Scorpion Pipe Diameter 63.5mm/2.5" * Tailpipe Monaco Tailpipe Diameter 90 x 76mm Shipping Dimensions 140cm x 60cm x 28cm

Read more less

Scorpion Exhausts BMW E90, E92 M3 Half system Fits Years 2007 to 2013 Fits to OEM / Scorpion Pipe Diameter 70mm/2.75 BMW really came to be recognised as producers of performance saloons after the formation of their famous M Division in the 1970’s and a real game changer for them was the launch of the E30 M3 in 1986 which went on to gain numerous championship victories in touring car racing. One of the first exhausts Scorpion developed was their own performance exhaust for the E30 M3 and at the same time Scorpion introduced the legendary DTM tailpipe to the UK market. Ever since Scorpion has been at the forefront of producing performance exhausts for BMW’s M cars and numerous others. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SBMB062 Product Type Half System Resonated Non-resonated Fitment Years 2007 - 2013 Fits To OEM / Scorpion Model Fitment E90 & E92 M3 (Does not fit cabriolet E93) Pipe Diameter 70mm/2.75" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 90cm x 78cm x 26cm

Read more less