Performance - Citroen DS3 (2010-2016)

The kit is suitable for the Citroen DS3 1.6 Turbo,the Peugeot RCZ THP 156 and the 207 GT/GTi  We use a custom designed Silicone Hose combined with a non-oiled Pipercross foam high flow filter . Everything needed is supplied in the kit, including the highest quality stainless steel clamps. Our Dyno testing of this kit showed improvements of 6 horsepower over the stock airbox on a standard engine with greater improvements on tuned vehicles. Whilst Power gains may vary depending on your modifications and level of tune, if you desire even more performance, this has to be the perfect choice. The filter is located directly in front of the cold air duct into the engine bay. This kit also significantly tidys up the engine bay by removal of the OEM airbox and associated cold air ducting. PLEASE NOTE: THIS PRODUCT WILL NOT FIT THE DS3 RACING

Read more less

Ramair Jetstream Induction Kit (JSK) for the Citroen & Peugeot 1.2 turbo 'PureTech' & 'e-THP' engine. This induction kit is designed for the CItroen DS3 and other vehicles sharing the same engine. This kit allows for increased airflow and induction noise over the factory air intake equipment. This kit mounts to standard factory air box mounting points. The kit comprises of… Ramair Performance Air Filter Washable Dual-Layer Foam with Stainless Steel cage internal construction Silicone Intake Pipe 4-ply high-quality silicone intake pipe which maintains a smooth 76mm diameter inlet from filter reducing down to the standard 63mm onto the rigid turbo inlet. Laser Cut, CNC Folded bracket with OEM mounting points Laser cut, precision folded filter bracket powder-coated in black, is designed to fit directly to the standard OEM factory air box mounting points without the need for modification. Laser Cut, CNC Folded bracket with OEM mounting points Laser cut, precision folded filter bracket powder-coated in black, is designed to fit directly to the standard OEM factory air box mounting points without the need for modification. Full Fitting Kit Includes all nuts, bolts, hose clamps, rubbers, vacuum hose and high quality silicone hose necessary to fit the kit to a standard car. This product is suitable for the following vehicles.... Make Model Engine Years Citroen C3 1.2 THP 2014 - 2018 Citroen C4 1.2 THP 2014 - 2018 Citroen DS3 1.2 THP 2014 - 2018 Citroen DS4 1.2 THP 2014 - 2018 Peugeot 2008 1.2 THP 2014 - 2018 Peugeot 208 1.2 THP 2014 - 2018 Peugeot 3008 1.2 THP 2014 - 2018 Peugeot 308 1.2 THP 2014 - 2018 Peugeot 5008 1.2 THP 2014 - 2018 Please use the vehicle look up tool at the top of the page to confirm fitment.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

Product Description Replacement Filter for: FMINDDS3FMINDK15FMINDK25FMINDK30FMINDK39

Read more less

Product Description This is a replacement carbon canister including Pipercross filter that fits the FMINDGOLR twintake and Fiat FMINDF500 These have been created exclusively for Forge by filtration gurus Pipercross, and feature the latest multilayer-foam technology that is proving to be so successful in this season’s British Touring Car Championship  (BTCC). These are priced individually. Please order 2 when replacing carbon canister/filters on the FMINDGOLR system. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.  

Read more less

Racingline Filter Oil & Cleaning Kit The Racingline Oil and Cleaner Kit will help you keep your filter in peak condition at all times and ensure that the complex triple-layer foam continues to deliver its power and filtration benefits for many years. Instructions are provided for cleaning and maintenance. It’s a simple process, but please take time to read through, or ensure that your technician reads them, before you begin. We would suggest that you keep these notes with your car for future maintenance/owners. We recommend that the filter element is cleaned and reoiled every 10,000 miles/16,000 km, and/or a visual inspection at least every 12 months. This is a simple procedure, and will ensure that your filter continues to deliver the power improvements over a standard car. If your car is regularly used in a dry/dusty environment, we advise that you clean and re-oil your filter more regularly If you don’t clean your filter at the above intervals, no loss of filtration will occur, and your engine will still be fully protected. However, the performance advantages from the additional air flow of a clean filter will be lost. You will also shorten the life of the filter element. REPLACEMENT FILTER Like all the other filters on your car, it’s worth replacing the air filter element itself periodically. Rather than cleaning and re-oiling, lots of customers prefer to simply replace their filter element for what is a relatively low cost. We recommend replacement after 2 years for optimum performance. Of course, the filter will last for a longer period of time with correct maintenance and inspection for condition of foam as laid out below. BUY REPLACEMENT FILTER Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR120000

Read more less

Filters are recommended to be cleaned every 5000Km with either compressed air or with this cleaning kit. Special Notes:WE CANNOT SHIP THIS ITEM OUTSIDE OF THE UK DUE TO LIMITATIONS ON SHIPPING LIQUID CHEMICALS AND AEROSOLS

Read more less

Ramair Jetstream Induction Kit (JSK) for the Citroen & Peugeot 1.2 turbo 'PureTech' & 'e-THP' engine. This induction kit is designed for the CItroen DS3 and other vehicles sharing the same engine. This kit allows for increased airflow and induction noise over the factory air intake equipment. This kit mounts to standard factory air box mounting points. The kit comprises of… Ramair Performance Air Filter Washable Dual-Layer Foam with Stainless Steel cage internal construction Silicone Intake Pipe 4-ply high-quality silicone intake pipe which maintains a smooth 76mm diameter inlet from filter reducing down to the standard 63mm onto the rigid turbo inlet. Laser Cut, CNC Folded bracket with OEM mounting points Laser cut, precision folded filter bracket powder-coated in black, is designed to fit directly to the standard OEM factory air box mounting points without the need for modification. Laser Cut, CNC Folded bracket with OEM mounting points Laser cut, precision folded filter bracket powder-coated in black, is designed to fit directly to the standard OEM factory air box mounting points without the need for modification. Full Fitting Kit Includes all nuts, bolts, hose clamps, rubbers, vacuum hose and high quality silicone hose necessary to fit the kit to a standard car. This product is suitable for the following vehicles.... Make Model Engine Years Citroen C3 1.2 THP 2014 - 2018 Citroen C4 1.2 THP 2014 - 2018 Citroen DS3 1.2 THP 2014 - 2018 Citroen DS4 1.2 THP 2014 - 2018 Peugeot 2008 1.2 THP 2014 - 2018 Peugeot 208 1.2 THP 2014 - 2018 Peugeot 3008 1.2 THP 2014 - 2018 Peugeot 308 1.2 THP 2014 - 2018 Peugeot 5008 1.2 THP 2014 - 2018 Please use the vehicle look up tool at the top of the page to confirm fitment.

Read more less

Ramair Jetstream Induction Kit (JSK) for the Citroen & Peugeot 1.2 turbo 'PureTech' & 'e-THP' engine. This induction kit is designed for the CItroen DS3 and other vehicles sharing the same engine. This kit allows for increased airflow and induction noise over the factory air intake equipment. This kit mounts to standard factory air box mounting points. The kit comprises of… Ramair Performance Air Filter Washable Dual-Layer Foam with Stainless Steel cage internal construction Silicone Intake Pipe 4-ply high-quality silicone intake pipe which maintains a smooth 76mm diameter inlet from filter reducing down to the standard 63mm onto the rigid turbo inlet. Laser Cut, CNC Folded bracket with OEM mounting points Laser cut, precision folded filter bracket powder-coated in black, is designed to fit directly to the standard OEM factory air box mounting points without the need for modification. Laser Cut, CNC Folded bracket with OEM mounting points Laser cut, precision folded filter bracket powder-coated in black, is designed to fit directly to the standard OEM factory air box mounting points without the need for modification. Full Fitting Kit Includes all nuts, bolts, hose clamps, rubbers, vacuum hose and high quality silicone hose necessary to fit the kit to a standard car. This product is suitable for the following vehicles.... Make Model Engine Years Citroen C3 1.2 THP 2014 - 2018 Citroen C4 1.2 THP 2014 - 2018 Citroen DS3 1.2 THP 2014 - 2018 Citroen DS4 1.2 THP 2014 - 2018 Peugeot 2008 1.2 THP 2014 - 2018 Peugeot 208 1.2 THP 2014 - 2018 Peugeot 3008 1.2 THP 2014 - 2018 Peugeot 308 1.2 THP 2014 - 2018 Peugeot 5008 1.2 THP 2014 - 2018 Please use the vehicle look up tool at the top of the page to confirm fitment.

Read more less