Performance - Cupra Formentor (2020-Present)

PLEASE ENSURE YOU MEASURE AND ORDER THE CORRECT SIZE FOR YOUR VEHICLE AS THIS PRODUCT IS MULTI SIZE / VEHICLE FITMENT REAR ANTI ROLL BAR BUSH 18.5MM PFR85-815-18.5   OEM Part Number: 5Q0511305AQ Size 18.5mm --- REAR ANTI ROLL BAR BUSH 18.5MM PFR85-815-18.5BLK   OEM Part Number: 5Q0511305AQ Size 18.5mm --- REAR ANTI ROLL BAR BUSH 19.6MM PFR85-815-19.6   OEM Part Number: 5Q0511305AR OEM Part Number: 5Q0511305BK OEM Part Number: 5Q0511305BC Size 19.6mm --- REAR ANTI ROLL BAR BUSH 19.6MM PFR85-815-19.6BLK   OEM Part Number: 5Q0511305AR OEM Part Number: 5Q0511305BK OEM Part Number: 5Q0511305BC Size 19.6mm --- REAR ANTI ROLL BAR BUSH 20.7MM PFR85-815-20.7   OEM Part Number: 5Q0511305AS OEM Part Number: 5Q0511305BD Size 20.7mm --- REAR ANTI ROLL BAR BUSH 20.7MM PFR85-815-20.7BLK   OEM Part Number: 5Q0511305AS OEM Part Number: 5Q0511305BD Size 20.7mm --- REAR ANTI ROLL BAR BUSH 21.7MM PFR85-815-21.7   OEM Part Number: 5Q0511305AT /5Q0511305BF OEM Part Number: 5Q0511305BA / 5Q0511305BE OEM Part Number: 8V0 511 305 A / 8V0511305A Size 21.7mm --- REAR ANTI ROLL BAR BUSH 21.7MM PFR85-815-21.7BLK   OEM Part Number: 5Q0511305AT /5Q0511305BF OEM Part Number: 5Q0511305BA / 5Q0511305BE OEM Part Number: 8V0 511 305 A / 8V0511305A Size 21.7mm --- FITS: Audi RS3 MK3 8V (2015 - 2020), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen T-Roc 4-Motion inc R, Audi TT / TTRS Mk3 FV/8S (2014 on) Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Skoda Karoq 4WD, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Touran (2017 - ), Audi TT / TTRS Mk3 FV/8S (2014 on)

Read more less

REAR LOWER TRACK ROD INNER BUSH PFR85-812   OEM Part Number: Arm = 5Q0501529C / 5Q0 501 529 C --- REAR LOWER TRACK ROD INNER BUSH PFR85-812BLK   OEM Part Number: Arm = 5Q0501529C / 5Q0 501 529 C --- fits: Audi S1 8X (2015 on), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Ateca Multi-Link (2016-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B8 (2013 on), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3, Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Arteon (2017 on)

Read more less

REAR LOWER TRACK ROD OUTER BUSH PFR85-811   OEM Part Number: Arm = 5Q0501529C / 5Q0 501 529 C OEM Part Number: Arm = 5Q0501529F / 5Q0 501 529 F --- REAR LOWER TRACK ROD OUTER BUSH PFR85-811BLK   OEM Part Number: Arm = 5Q0501529C / 5Q0 501 529 C OEM Part Number: Arm = 5Q0501529F / 5Q0 501 529 F --- FITS: Audi S1 8X (2015 on), Audi RS3 MK4 8Y (2020 on), Seat Ateca Multi-Link (2016-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B8 (2013 on), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3, Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Arteon (2017 on)

Read more less

REAR UPPER WISHBONE INNER BUSH PFR85-514   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- REAR UPPER WISHBONE INNER BUSH PFR85-514BLK   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- fits: Audi A1 Quattro (2013), Audi S1 8X (2015 on), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U,  Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

REAR UPPER WISHBONE OUTER BUSH PFR85-513   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- REAR UPPER WISHBONE OUTER BUSH PFR85-513BLK   OEM Part Number: Arm = 5Q0505323D / 5Q0 505 323 D OEM Part Number: Arm = 1K0505323N / 1K0 505 323 N --- fits: Audi A1 Quattro (2013), Audi S1 8X (2015 on), Audi A3 inc Quattro MK2 8P (2003-2012), Audi RS3 MK2 8P (2011-2013), Audi S3 MK2 8P (2006-2012), Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi RS3 MK3 8V (2015 - 2020), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi RS3 MK4 8Y (2020 on), Seat Alhambra MK2 (2010 - ON), Seat Ateca Multi-Link (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Bora A5 (1K) (2005-2010), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK6 inc R 5K (2009-2012), Volkswagen Golf MK5 1K, Volkswagen Golf Mk5 GTI & R32, Volkswagen Golf Plus 5M, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK5 A5 1K (2005-2010), Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon Mk2 1P (2005-2012), Skoda Octavia Mk2 1Z (2004-2012), Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Volkswagen Passat B6 & B7 Typ3C (2006-2013), Volkswagen Passat B8 (2013 on), Volkswagen Passat CC 35 (2008-2012), Audi Q2 4WD Quattro MULTI LINK, Audi Q3 8U, Audi RSQ3 8U,  Audi Q3 F3, Audi RSQ3 F3, Volkswagen Scirocco MK3 (2008 - 2017), Seat Altea 5P (2004-), Seat Tarraco (2018-), Volkswagen Sharan MK2 (2010 - ON), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2009-2010), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen Tiguan 5N MK1 (2007 - 2017), Volkswagen Tiguan AD/BW MK2 (2017 on), Seat Toledo Mk3 5P (2004-2009), Volkswagen Touran (2003-2015), Volkswagen Touran (2017 - ), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014), Audi TT / TTRS Mk3 FV/8S (2014 on), Volkswagen Vento A5 (2005 - 2010), Volkswagen Arteon (2017 on), Volkswagen CC (2012 - 2017), Volkswagen Eos 1F (2006-2016)

Read more less

PFF85-833 PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - FAST ROAD/TRACK PFF85-833P PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. . OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - TRACK/MSPORT PFF85-833BLK PFF85-833 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on) Diagram reference 30

Read more less

LOWER ENGINE MOUNT (LARGE) INSERT DIESEL PFF85-832R Some NVH transmission should be expected when fitting this part to a Diesel vehicle. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT PFF85-832   OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT TRACK USE PFF85-832P Made in Purple 80A and suitable for higher powered cars and track cars, this part helps to further reduce engine movement over fitting the standard PFF85-832 insert. Increased NVH may be felt when fitted. OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- LOWER ENGINE MOUNT (LARGE) INSERT PFF85-832BLK   OEM Part Number: 5Q0198037B / 5Q0 198 037 B OEM Part Number: 5Q0198037C / 5Q0 198 037 C OEM Part Number: 5Q0198037F / 5Q0 198 037 F --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on)                    

Read more less

FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - ROAD PFF85-831 PFF85-831 replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - FAST ROAD/TRACK PFF85-831P PFF85-831P replaces the lower half of the original bush whilst including an insert to fit into and fill the voids in the upper bush to minimise wheel hop and improve gear-shifting. This unique bush has been designed to be fitted without subframe removal and avoids associated wheel alignment costs. This part is made in our Purple Shore A 80 for vehicles running increased power or that see occasional track use. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FRONT LOWER ENGINE MOUNT HYBRID BUSH (LARGE) - TRACK/MSPORT PFF85-831BLK PFF85-831 replaces the lower half of the original bush OEM part number 5Q0 198 037 / 5Q0198 037 A and includes an insert to fit into and fill the voids in the upper bush. This unique bush has been designed to be fitted without subframe removal from the vehicle and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037A / 5Q0 198 037 A OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- fits: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3, Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on)

Read more less

LOWER ENGINE MOUNT INSERT (LARGE) DIESEL PFF85-830R Suitable for diesel models, using a softer material that helps reduce movement from the bush but transmits less noise and vibration over fitting the standard PFF85-830 insert. OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) PFF85-830   OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) TRACK USE PFF85-830P Suitable for higher powered cars and track cars, using a stiffer material which helps further reduce engine movement over fitting the standard PFF85-830 insert, being a stiffer material additional noise and vibration may be felt. OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- LOWER ENGINE MOUNT INSERT (LARGE) PFF85-830BLK   OEM Part Number: 5Q0198037A / 5Q0 198 037 A / 5Q0 198 037 / 5Q0198037 OEM Part Number: 8V0198037 / 8V0 198 037 / 5Q0199868 / 5Q0 199 868 OEM Part Number: 5Q0199867 / 5Q0 199 867 --- FITS: Audi A3 / S3 MK3 8V 125PS plus (2013 - 2020) Multi Link, Audi A3 MK3 8V up to 125PS (2013 - 2020) Rear Beam, Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Volkswagen Golf R Mk8 4WD, Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Audi RSQ3 F3,  Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Audi TT / TTRS Mk3 FV/8S (2014 on) Diagram reference 30

Read more less

FRONT WISHBONE REAR BUSH PFF85-802 Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902G. OEM Part Number: Bush = 5C0407183 / 5Q0407183 / 81A407183 OEM Part Number: Arm = 5C0407151 / 5Q0 407153 OEM Part Number: Arm = 81A407151C / 81A407152C Size 65mm --- FRONT WISHBONE REAR BUSH PFF85-802BLK Fits steel subframes and steel wishbones only. This part features an offset bore to the sleeve to match the caster offset of the OE bush. For further caster adjustment for track/motorsport applications, use PFF3-902GBLK. OEM Part Number: Bush = 5C0407183 / 5Q0407183 / 81A407183 OEM Part Number: Arm = 5C0407151 / 5Q0 407153 OEM Part Number: Arm = 81A407151C / 81A407152C Size 65mm --- FITS: Audi A1 GB (2018-on), Audi A3 / S3 MK4 8Y Quattro (2020 on), Audi A3 MK4 8Y FWD (2020 on) Multi-Link, Audi A3 MK4 8Y FWD (2020 on) Rear Beam, Seat Ateca Multi-Link (2016-ON), Seat Ateca Rear Beam (2016-ON), Volkswagen Beetle A5 Multi-Link (2011 - ON), Volkswagen Beetle A5 Rear Beam (2011 - ON), Volkswagen Caddy Mk3.5 Typ 2K (06/2010 - 2020), Volkswagen Caddy MK4 Typ SB (2020-ON), Seat Formentor 2WD, Seat Formentor 4WD, Volkswagen Golf MK7 5G 2WD 122PS plus Multi-link, Volkswagen Golf MK7 5G 2WD up to 122PS Rear Beam, Volkswagen Golf MK7 5G 4WD inc R, Volkswagen Golf MK7 GTE, Volkswagen Golf Mk8 2wd Multi-Link, Volkswagen Golf Mk8 2wd Rear Beam, Seat Ibiza Mk5 KJ1 (2017 - ), Volkswagen Jetta MK6 A6 Multi-Link (2011 - 2018), Volkswagen Jetta MK6 A6 Rear Beam (2011 - 2018), Volkswagen Jetta MK7 A7 Multi-Link (2018-ON), Volkswagen Jetta MK7 A7 Rear Beam (2018-ON), Skoda Karoq 2WD, Skoda Karoq 4WD, Skoda Karoq Multi-Link, Seat Leon MK3 5F 150PS plus (2013-2020) Multi Link, Seat Leon MK3 5F upto 150PS (2013-2020) Rear Beam, Seat Leon KL 4WD, Seat Leon KL Multilink, Seat Leon KL Rear Beam, Skoda Octavia 5E 150PS plus Multi-link, Skoda Octavia 5E up to 150PS Rear Beam, Skoda Octavia NX 4WD, Skoda Octavia NX Multilink, Skoda Octavia NX Rear Beam, Volkswagen Passat B8 (2013 on), Volkswagen Polo MK6 AW Inc. GTI (2018 - ), Audi Q2 2WD REAR BEAM, Audi Q2 4WD Quattro MULTI LINK, Audi Q3 F3, Seat Arona (2019-on), Seat Tarraco (2018-), Skoda Kodiaq (2017 - ON), Skoda Yeti 5L (2009 - 2017), Skoda Superb (2010 - 2015), Skoda Superb (2015 - ), Volkswagen T-Roc 4-Motion inc R, Volkswagen T-Roc FWD Rear Beam, Volkswagen Tiguan AD/BW MK2 (2017 on), Volkswagen Touran (2017 - ), Ford Transit / Tourneo Connect Mk3 (2021 ON), Volkswagen Arteon (2017 on), Volkswagen T-Cross (2018 - On), Volkswagen Taigo (2020 on)

Read more less

Bespoke Custom Design Mudflaps to fit:CUPRA Formentor (2020 to present)  *ShortieZ* - Protection without the full Rally Look! ShortieZ are our latest design, They do not stick out / hang as low as our rallyflapZ Version Mudflaps! - No Drilling Required! Designed and made to order here in the UK by us 'The rallyflapZ Team' Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance CUPRA FORMENTOR (2020+) KIT INCLUDES:Front Fixing Kit Contents:2 x Front ShortieZ Mud Flaps2 x Front Stainless Steel Laser Cut Brackets (Powder Coated Black)+  Fixings RequiredRear Fixing Kit Contents:2 x Rear ShortieZ Mud Flaps2 x Rear Stainless Steel Laser Cut Brackets (Powder Coated Black)+  Fixings Required(The plugs provided are very strong and are difficult to remove once inserted)Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOur rallyflapZ offer outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured that with our rallyflapZ come peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.MATERIALS AVAILABLE:. 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin / Matt-like Finish LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

VBT Hooked Discs are the latest disc face design by AP Racing. Vagbremtechnic adapted the initial design onto OEM discs for the following reasons.  1.They give improved bite 2. For high temperature track day use they give better debris clearance and reduces distortion vibration. For road use we decided to opt for the version where the outer grooves do not run out to outside diameter but stay within the confines of the disc face. For road applications they also generate less noise than straight or curved groove discs and don't suffer the fatigue cracking that drilled disc users can experience after many heat cycles. So win win for VBT Hooked, Vagbremtechnic also take a non handed OEM casting and LeftRight the VBT Hooked pattern to ensure temperature stability and an appropriately designed disc face for either the nearside or offside of the car to give a good gas path despite not using a handed casting. We've seen some real success on a budget with these discs especially when used with a four piston caliper upgrade. Where they really come into their own though is when theyre combined with a more capable set of brake pads - this is a real track day enabler and we find customers finding other weaker areas of their car such as tyres and suspension now that their car stops reliably again and again. VBT Hooked is the homologated disc face for BTCC and has been for three years. FITS:  AUDI A3 8P AUDI A3 8V AUDI TT 8S CUPRA FORMENTOR CUPRA LEON SPOURTSTOURER CUPRA LEON SEAT LEON MK2 1P SEAT LON MK3 5F SKODA OCTAVIA MK2 1Z SKODA OCTAVIA MK3 5E VW BEETLE 1997-2010 VW CADDY 2K VW EOS VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW JETTA 1B VW JETTA 1K VW SCIROCCO

Read more less

WHEEL FITMENT: Whilst we do try to ensure all our brake kits fit behind the majority of wheel types both stock and aftermarket, we make no guarantees that they will. There is a chance you will need wheel spacers to clear our brake kits. Please take the appropriate steps to ensure wheel clearance before final installation. DRILLED DISCS: Drilled discs are intended for light use, if crack form from drilled holes they have been used too hard and this is not something that is covered under warranty. If outright performance is required we strongly recommend grooved or J hooked. FITS: AUDI A3 8P AUDI A3 8V AUDI TT 8J AUDI TT 8S CUPRA FORMENTOR CUPRA LEON SPORTSTOURER CUPRA LEON SEAT LEON MK2 1P SEAT LEON MK3 5F SKODA OCTAVIA MK2 1Z SKODA OCTAVIA MK3 5E VW BEETLE A5 2011 VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW JETTA 1K VW PASSAT B6 VW PASSAT CC VW SCIROCCO PRICES: - All prices shown exclude and include VAT and are correct at time of publishing and are subject to change without prior notice. - Prices do not include Shipping or Installation fees. VAT: - VAT is charged at the current rate of 20% to customers within the European Union Community. BREXIT 2021 EUROPEAN TAXATION CHANGES: For European Customers prices now displayed in cart once you enter your address will have 20% UK VAT Tax removed, however you will have to pay some form of Duties / VAT prior to delivery of your goods. If you are unsure of charges we recommend you should contact your local authorities ahead of placing your order. DISPATCH AND DELIVERY: - Our week day cut off time for same day dispatch on stocked items is 13:00 (GMT/BST). - If you need an item quickly, please contact us by phone on 0044 (0) 161 804 9888 prior to placing the order online to ensure that the item(s) you require is in stock ready to ship, - If you have ordered later than 13:00 (GMT/BST) and are looking for a same day dispatch, this can sometimes be accommodated, but please contact us first so that we can put things in place to achieve this for you. STOCK: - Our website does not display any information regarding an items stock level. Whilst we try to keep plenty of stock of our most popular items, it is not always possible for us to keep one of every option of every product on the shelf ready to ship. - If you need an order by a certain day/date, we strongly recommend you contact a member of our sales team to check the availability of the item(s) you require. - If you are planning to have your items fitted professionally, please wait until you have received and checked your goods before making any workshop or garage appointments.

Read more less

As part of our expanding VAG product range, AIRTEC Motorsport is proud to launch our enlarged turbo inlet elbow upgrade for the MQB Evo engine (300-320ps), suitable for track or fast road use. A direct replacement part that offers increases in performance and response, the enlarged turbo inlet elbow features a freer-flowing design with an increased internal diameter. How it worksThe original elbow features a constant 80mm diameter throughout, which limits flow and capacity. Our AIRTEC Motorsport direct replacement kit features a cast aluminium elbow and Pro Hoses silicone hose with a larger 90mm diameter throughout, until it tapers down to meet the 80mm air box, which offers a 27% increase in cross sectional area. The increased volume and improved design works to reduce restriction and improve flow to the turbo, providing an increase in throttle response. The elbow upgrade includes all fixtures and fittings, as well as detailed instructions. Dimensions:OEM Turbo Elbow:Diameter: 80mmCross sectional area: 5,027mm² AIRTEC Motorsport Turbo Elbow:Diameter: 90mmCross sectional area: 6,362mm² Fitment:Audi S3 8Y – 2020 onwardsCupra Leon Mk4 300 TSI FW – 2020 onwardsCupra Formentor 310PS – 2020 onwardsVW Arteon R 2.0 TSI 320ps – 2020 onwardsVW Golf Mk 8 GTI Clubsport – 2020 onwardsVW Golf Mk8 R – 2020 onwardsVW Tiguan II R 2.0 TSI 320ps – 2020 onwards Features: 27% increase in cross sectional area Smoother, freer-flowing design Improves airflow to the turbo Increases throttle response Direct replacement fitment Includes all fixtures and fittings Features detailed fitting guide AIRTEC Part No: ATMSVAG10

Read more less

Street Pro Rear Side Splitters Cupra Formentor Mk1 FITS ONLY:Cupra Formentor Mk1 (2020-2024) COMPLETE SET CONTAINS: §  Maxton Racing Rear Side Splitters §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Street PRO Rear Diffuser Cupra Formentor Mk1 FITS ONLY:Cupra Formentor Mk1 (2020-2024) COMPLETE SET CONTAINS: §  Maxton Racing Rear Diffuser §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Street PRO Front Splitter Cupra Formentor Mk1 FITS ONLY:Cupra Formentor Mk1 (2020-2024) COMPLETE SET CONTAINS: §  Maxton Racing Front Splitter §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material)  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Street PRO Side Skirts Diffusers Cupra Formentor Mk1 FITS ONLY:Cupra Formentor Mk1 (2020-2024) COMPLETE SET CONTAINS: §  Maxton Racing Side Skirt Diffusers §  Mounting kit Maxton Racing properties include: §  A more durable material; 10 mm thick ABS plastic. §  Increased impact and scratch resistance. §  New designs, providing a new unique style. §  UV protective coating. §  Temperature/weather resistant. §  Products arrive with protective film vacuum sealed to it. §  No painting required. §  Multiple finish options: 10 mm thick matte black, 10 mm thick matte black with a red core. §  If you decide to paint the product, primer must be used first. § Parts are labelled confirming authenticity and quality of the product. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Bespoke Custom Design Mudflaps to fit:CUPRA Formentor (2020 to present)  - No Drilling Required! Designed and made to order here in the UK Designed for Looks & Protection Only the Best Materials used Easy Installation Long Lasting Exceptional Flexibility Impact Resistance CUPRA FORMENTOR (2020+) KIT INCLUDES:Front Fixing Kit Contents:2 x Front Mud Flaps2 x Front Stainless Steel Laser Cut Brackets (Powder Coated Black)+  Fixings Required Rear Fixing Kit Contents:2 x Rear Mud Flaps2 x Rear Laser Cut Stainless Steel BracketsAll Fixings required Avoid expensive re-sprays and get some protection now against Road Grit, Mud, Dirt & GreaseOffering outstanding durability when compared to conventional OEM hard plastic or moulded Mudflaps, You can be assured with peace of mind that they can be exposed to the harshest weather conditions without any danger of corrosion.  MATERIALS 4mm Thick PVC (Gloss) - Perfectly fine for everyday road use - High Quality with a Gloss Finish 4mm Thick PVC (Satin) - Perfectly fine for everyday road use - High Quality with a Satin (Matt-Like) Finish Kaylan Polyurethane PU (Gloss) - Strong, Durable, Abrasion Resistant - MSA & WRC/FIA Compliant, Trusted by the world's best Rally Teams, Tough enough to withstand all manner of impacts and extreme high/low temperatures. LOGO'SOur Logo's are a High quality vinyl material which is applied once the Mud Flaps have been cut to shape and sanded.The Vinyl is long lasting once applied to the mud flap material - however in the event of peeling or damage to them - we offer a life time guarantee on them!

Read more less

Description We introduce to you the IllumiNite D2S Bi Xenon replacement bulb upgrade!  A simple replacement unit, completely plug and play providing phenomenal results. Suitable for any D2S application including self leveling headlights. Upto 50% Brighter than OEM / Standard Headlights providing a safer driving experience at night but without causing glare to other drivers. Suitable for Projectors - Will not burn lenses! Technical Specs Colour: 6000K White Power: 12v / 35w Fitment: D2S Xenon / HID Pack Contents 2x D2S Bulbs Guarantee Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Vehicle Fitment: Some vehicles may use different types of bulbs depending on spec levels - For example, a special edition vehicle (Such as Ford "ST" or VW "GTi") may have a different light unit to a standard spec. If this item is listed on your vehicle catergory please confirm that it is the correct fitment for your vehicle by checking your item prior to ordering. 14 day Money back guarantee if unsatisfied Subject to product being returned at Buyers cost in a re salable condition!

Read more less

Description: When traveling Abroad, or even in the UK its always best to have a tyre inflator in your vehicle! 12v with fused cigerette lighter plug - up to 300psi. Complete with adapter kit for football and bicycle. 3mtr Cable - Enough to use even on large vehicles.

Read more less

This product is for Full Kits with a MK7 Number Plate product option, where the customer can choose this item as part of their kit!

Read more less

Product Description FMINT24 is a performance intercooler for the MQB platforms with the EA888 GEN4 Engine. Produced, designed, and tested, at our headquarters in Gloucester UK. Throughout the development process we have strived to improve the efficiency and performance of the EA888 GEN4 engine. Our project brief was to develop an intercooler that utilised all of the available space in the original position of the OEM intercooler, and to ensure the inlet air temperature is reduced, without any negative effects on the boost pressure or engine and transmission cooling. In the MQB chassis the intercooler housing is particularly restricted and confined to a small amount of space, due to it not only housing the intercooler, but also the radiator and air conditioning condenser. The front panel in theory is a sandwich pack that houses the auxiliary cooling components. This means in order to increase the size of the intercooler without paying detriment to the performance of the surrounding items, and with also having very little extra space available, that it can be very difficult to execute the perfect blend of a high flow intercooler within such a close proximity. Our research and development engineers started with a brief to fit our existing intercooler (FMMK7FMIC) that was for the MK7 platform, to our development VW MK8 Golf R. Upon installation, we then tried to establish if we could re-engineer the intercooler with an increased inlet and outlet size along with increasing the volumetric capacity to increase flow along with future proofing the design to work well with highly tuned stage 3 plus EA888 Gen 4 engines. Using a combination of scanning software and traditional measuring methods, the design was created. This was then fine-tuned by our flow dynamics simulations programs (CFD), and the end tanks were initially created by 3D printers. This enabled us to ensure the fit was perfect on the vehicle before any prototype castings or machined billet end tanks were produced ready for dyno testing. Several baffle configurations were designed, and flow simulated to ensure the maximum performance was obtained to keep the core working at its optimum, along with ensuring all its cooling capabilities had been upheld, and that the total volume of the core internal is utilised for optimum performance. With an increase in inlet and outlet sizes, we then turned our attention to the design of our silicone hoses. With flow in mind, we have created a step within the hose so where the hose meets the hot and cold side of the inlet and outlet junctions the transition is seamless, this helps to lesson any disturbance to the airflow and prevent unwanted turbulence. To further aid with flow, the inlet and outlets have been increased to 76mm from the OEM size of 63mm which equates to a 45% increase in surface area. The consideration of space and our clever design has led us to produce several intercooler cores with different fin configurations and internal capacities. Depending on the core design, testing results led us to choose a bar and plate design with over 83% more volume than the OEM intercooler, and with a frontal area increase of 10%. Why do we test different cores? Here at Forge Motorsport, when developing an intercooler, we will test several different cores for each application. For example, a bar and plate style core, a tube and fin style core along with different fin pitches and heights, as well as changing the internal fin pitches/shapes and density within the tube; thus enabling us to fine tune the amount of pressure drop the intercooler produces. Pressure drop is not always a bad thing, as our testing and research has proven on various projects. This is because the pressurized air velocity is being stalled by the pressure drop within the cooler thus allowing more time to cool the air within the cooler itself, as air passes through the non-pressurized face of the core, that is open to the atmosphere.  Too much pressure drop can of course have a problem on the higher performance engines as the intercooler reaches its maximum efficiency the turbo has to work a lot harder to force the air through the core. This in turn creates higher inlet air temps (IAT’s) due to the turbo creating more heat as it is over stressed and worked harder. No pressure drop can also prove to be inefficient as the cooler will not lower the charge temperature again resulting in higher inlet air temperatures. Dyno Results Testing was completed using Performance Remap in Gloucester with their VTEC 4-wheel drive dynamometer. This was to ensure all our data has been achieved with results as accurately as possible by an independent tuner. As you can see from the dyno results below, peak power was increased from stock by 11bhp and 20nm of torque at 5500RPM with the Forge Motorsport performance intercooler installed. The best news is that there are significant torque gains throughout the rev range, meaning that the car power will pick up quicker and pull the whole way through to redline, including an impressive gain in BHP from 5000 RPM TO 6500 RPM. Gains on vehicles with re calibrated software and further hardware performance parts can be expected to be a lot higher due to the substantial drop in IATS when FMINT24 is installed. During our extensive testing, we let the car heat soak on the dyno until the radiator fans tripped on and off (which gives an inlet temperature of around 40°C). We then did a dyno pull from this point which gives a more consistent result and reflects real-world driving conditions more accurately. You can easily see the Forge intercooler cools much quicker and delivers a much greater drop in temperature compared to OEM.     After more than six pulls on the dyno we still had super safe IAT’s, and the Forge Motorsport intercooler gave results of 34°C at 6548 RPM giving a reduction of 58% over the factory’s intercooler intake temps from 58°C at 6508 RPM. These tests took place in relatively hot conditions with an ambient dyno cell temperature of 23°C proving how inefficient the stock intercooler is. In the summer months, the stock intercooler along with higher inlet air temperatures will have a hugely negative impact on the engine’s performance. In these conditions, the engine management will retard the ignition, resulting in a lower powered engine as temperatures rise and the ECU then pulls out the timing to stop detonation. On a mapped vehicle, the results will be even more detrimental and can lead to possible premature engine wear. If you use your car for fast road or have a high-performance tune in a hot climate, this product is essential.  Why do we try to decrease IAT's? (Inlet Air Temperature) Temperature and volume of air supplied to your vehicles engine that is compressed by the turbo charger has a better effect on performance when cool as this is to provide the engine with more oxygen (denser air), thus improving the combustion in each cylinder. In addition, by regulating and reducing the air temperature, it also increases the reliability of an engine by keeping the AFRs (Air Fuel Ratios) in each cylinder at a safe level, which in turn, can increase an engines power due to the air being cooler. A bigger bang is then created within the cylinder, providing the correct amount of fuel is added. This can equate to an increase in BHP and torque. ​​​​ The Forge Motorsport intercooler is a perfect performance enhancing product that fits directly to the OEM mounting points, making for an easy install, in a relatively short period of time. No cutting of any components is needed, making the installation reversible if the vehicle needs to be returned to stock at any time in the future. The core and end tanks are finished in our black textured anti corrosion coating that also aids with its thermal properties and keeps the product looking that bit stealthier or OEM+. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.

Read more less

  Rear Valance V.1 Cupra Formentor FITS ONLY:Cupra Formentor (2020-2024)** The rear valance is removable for the purpose of use the hook **** Fits only with 245 and 310 KM versions ** COMPLETE SET CONTAINS: -> Rear Diffuser This product is an add-on to the original diffuser. We recommend using a strong adhesive to secure fitment, such as tiger sealant.COLOUR:-> Gloss Black CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less