Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed!ONLY 25MM LEFT IN BLACKStrengthened, Fortified and immortalised.Our Home brand CEUK Wheel spacers are now made exclusively for us by none other than Eibach in Germany!Lifetime GuaranteeUltra Strong Spacer & StudsBlack & Silver now availableMultiple Stud PatternsPlease ensure you select correctly!Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!
SLIGHT QUALITY ISSUE WITH A HANDFULL ON THE LAST BATCH SO THESE ARE NOW UP FOR CLEARANCE. THE MOULD APPEARS TO HAVE BLED CAUSING LITTLE BITS OF MELTED PLASTIC ON THE CLIPS WHICH NEEDS TRIMMING OFF WITH SNIPS OR A BLADE AND THE OVERALL QUALITY IS ABOUT 20% LOWER THAN EXPECTED. THESE ARE PERFECT FOR A "DIY'ER" WHO WANTS TO HAVE A FIDDLE ON THE CHEAP. NONE RETURNABLE
Ford Performance logo in Red and White as seen in the pictures!
Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each!
Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates.
These items are slightly marked in certain areas, each set is unique and as a result they are on clearance at 50% off - Please note, these are NONE RETURNABLE and NO WARRANTY IS PROVIDED!
All items are brand new, marks may be from production or storage - There is 1 set of each, if the item shows as "Sold out" when you select it, then it has already gone
SET 1: SOLD
SET 2: LEFT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE, RIGHT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE
SET 3: LEFT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE, RIGHT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE
ITEM DESCRIPTION
The All new Enhanced Edition sequential indicator unit from CEUK for the MK7 Fiesta (Pre Facelift & Facelift)
A fine complement for our LED front and rear indicator offerings!
Simple plug and play unit, installed by simply removing the OEM bulb and lense and replacing with our full replacement Unit!
Amber sequential strobing that is completely canbus friendly!
Smoked Lense
Warranty:
The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
CLEARANCE ITEM- ITEMS ARE NONE RETURNABLE AD HAVE NO WARRANTY. PLEASE SEE PICTURES AS THESE ITEMS BOTH HAVE SMALL DEFECTS ON THEM.
Ford Performance logo in Red and White as seen in the pictures!
Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each!
Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates.
Best quality guaranteed!
1.0 EcoBoost Crossover pipe - Fiesta
Please note: fits FIESTA ONLY - Focus you will need a different design, please inform our support team or add a note to order advising this is for a FOCUS so we can send the revised bracket!
Want it fitted by CEUK? We can fit the Hose And/Or Induction kit from £25 + Vat - give us a call on 0843 289 0182 to arrange.
The new CEUK 1.0 Crossover pipe sits between the primary and secondary induction hose on the cylinder 1.0 engine, and allows more air to pass around your intake system thus giving more power
Improved induction sound as you will hear the air passing through when accelerating and will assist giving a greater blow off sound from your induction kit
Features:
Swaged ends so induction pipes can't blow off
Silver mandrel bent alloy pipe work
Uses original fixing points
Focus 1.0 engine cover can still be fitted
Optional CEUK Logo in numerous colours
Fits all Fiesta Mk7/7.5 and Focus MK3 1.0 Eco Boost 100 ps and 125ps, 140ps models
Have you been #Enhanced?
Description
The Brand New CEUK Stage 2 Enhanced Intake system that works perfectly with the standard 1.0L 100ps, 125ps & new 140ps Fiesta EcoBoost.
Expect to see gains of 5-10bhp compared to the original Airbox.#Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. And only £132.50!!
Easy fitting, takes less than 15-20 minutes to install
Enhancing both sound, Looks AND Performance this kit is a must have for all enthusiasts starting their modified Journey, Complete with a lifetime Guarantee
Features:
- CEUK “C” Logo To allow air into the filter
- Removes ugly original plastic & restrictive airboxAdds power and torque
- more responsive and exciting driving experience
- #Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh')
What’s Included?
1x CEUK #Enhanced Filter Cage
1x Car Specific MAF Duct
1x Free Flowing Cotton Air Filter
1x Fitting Kit!
Guarantee
Lifetime Warranty and Guarantee on all Enhanced Intake Systems
Description
#Enhance your MK Fiesta 1 Litre EcoBoost with the Enhanced Performance stage hardware kit
Featuring everything needed to take your car from #ZeroToHero you can make your baby boost a true pocket rocket
Hoses, Crossover Logo and Intercooler {if selected} logo will all be supplied in the colour you choose on the drop down.
Save money by buying the kit together
Whats Included
1 x Enhanced Intake Kit
1 x CEUK Primary Induction Hose
1 x CEUK Crossover Pipe
1 x CEUK Secondary Induction Hose
1 x CEUK Turbo Hard Pipe
1 x CEUK Intercooler Hose Kit
Optional Extras
AirTec Stage 2 Intercooler {Supplied Black with same colour Logo as hoses unless otherwise specified}
Milltek Turbo Back Exhaust with Cat and Cat Back
Delivery
We aim to have all the items with you within 7 working days, in some very rare cases this may take upto a fortnight.
Some items may be sent seperately in seperate packages due to size
Enhanced Performance Turbo Hard pipe for all models of 1.0 EcoBoost
A high flow turbo pipe, improving pressure drop across the charge system which in turn improves the efficiency of the engine and improving the ability for additional performance to be added.
Made with high quality stainless steel, this pipe comes off the turbo and connects to the charge silicone hose going to the intercooler.
Compatible with the following models:
Fiesta MK7 1.0 EcoBoost 100ps
Fiesta MK7 1.0 EcoBoost 125ps
Fiesta MK7 1.0 EcoBoost 140ps
Focus MK3 1.0 EcoBoost 100ps
Focus MK3 1.0 EcoBoost 125ps
Focus MK3 1.0 EcoBoost 140ps
Fiesta MK8 1.0 EcoBoost 100ps
Fiesta MK8 1.0 EcoBoost 125 ps
Fiesta MK8 1.0 EcoBoost 140ps
Help your 1.0 EcoBoost get a much Air into the engine as possible!
Transform your 1.0 EcoBoost engine bay, larger diameter pipe-work combined with AIRTEC induction kit means louder waste-gate chatter, similar to Focus RS Mk2
Features
Swaged ends so induction pipes can't blow off
Silver mandrel bent alloy pipe work
Uses original fixing points
Focus 1.0 engine cover can still be fitted
Increased induction noise AIRTEC induction kit recommended
Fits:
MK7 Fiesta 1.0 EcoBoost All Models
MK3 Focus 1.0 EcoBoost All Models
MK8 Fiesta 1.0 EcoBoost All Models (Front Turbo Only)
The brand new Big Aero wing from Airtec Motorsport is here!
Designed with the help of CEUK based on our MK7 RT330 Track car we are proud to be the first stockist of this amazing item
AIRTEC Motorsport Rear Wing for Mk7 Fiesta
The kit attaches to the car using our bespoke AIRTEC Motorsport designed brackets, that is bolted to the boot lid. Please note, this requires drilling to your boot lid and should be done by a competent professional.
Key features: • Designed and developed in the UK • Tested on track and road with our own Time Attack car • Bespoke laser-cut and powder coated alloy brackets • Unique alloy end plates available in three powder coated colours • High-quality fibreglass centre blade section finished in satin black • Comprehensive fitting kit with all fixtures, fittings, instructions and drilling template
Available in a choice of coloured end plates: Gloss Black Race Red Frozen White
AIRTEC part no: ATMSFO10
Please note: We endeavour to deliver an extremely high quality product but due to the handmade manufacturing process there is the possibility of minor imperfection(s) on the centre wing blade
AIRTEC high-flow turbo hard pipe for the Fiesta 1.0 EcoBoost improves the pressure drop across the charge system, improving the efficiency of the engine and improving the ability for additional performance to be added.
Made with high quality stainless steel. The AIRTEC turbo hard pipe will improve airflow and turbo noise (dump valve pshhh)
Features:
High quality hard pipe
Easy to fit
Compatible with all Fiesta 1.0 EcoBoost models, Mk7 & Mk8 – 100PS, 125PS, 135PS, 140PS (Limited, Red & Black, 164 models).
Is your intercooler looking a bit run down?
AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler.
Stencils available for all AIRTEC intercoolers.
Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1)
Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane.
Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3)
Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.
AIRTEC Motosport have designed and released a bolt in roll cage for the Ford Fiesta ST180 and ST200 AND MK7 FL - NO drilling or cutting required.
Designed primarily for use as a show cage/harness bar, these are a quick and easy fit retaining the use of original M10 seat belt mounting points.
Constructed from FIA spec E355+N cold drawn seamless steel, aimed at strengthening and tightening the chassis in a simple and effective manner.
No need for any additional mounting brackets to be welded in.
AIRTEC Motorsport brake cooling guide for the Fiesta MK7.Designed to stop brake fade and spongy pedal. AIRTEC Motorsport brake cooling guide forces air towards the brakes and calliper when driving, simply mounts to the car using pre-existing holes for a quick and easy install. There is no need to remove fog lights or drill any holes.
Only available in Pro-Series Black
Registered Design Right number 6016420
AIRTEC Part No: ATMSFO38
Allows exhaust gases to flow much faster. More Power!
Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car)
This part is sold for motorsport and off road use only and will NOT pass an MOT emissions test or police roadside checks.
AIRTEC part no: ATEXHFO8
AIRTEC Motorsport boost gauge kit for Fiesta 1.0 Ecoboost.
The AIRTEC Motorsport Fiesta MK7 boost gauge kit, supplied with Turbosmart Boost Gauge in PSI or BAR.
A simple modification with an OEM look.
Comes complete with fitting guide for a quick & simple DIY install.
Kit includes:
Turbosmart backlit boost gauge (Bar or PSI)
Gauge securing ring
Vacuum hose
Bracket and bolts
CNC vacuum take off (Fits onto inlet manifold)
AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.
AIRTEC Part Number ATMER41:
TECHNICAL DATA
AIRTEC Motorsport Embroidered High-Quality Car Mats
Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.
Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting.
Fits Right-Hand Drive vehicles only
⦁ AIRTEC Motorsport branded complete set of front and rear mats
⦁ Fitted with original retaining/mounting holes where applicable
⦁ High-quality finish in black with white embroidered logo
⦁ Huge range of makes and models available
⦁ Vehicle specific – no trimming required
AIRTEC Part Number: ATMER41
AIRTEC Motorsport lightweight alloy header tank for Fiesta MK7 – Complete with sight glass!
No drilling required, uses original fixing points and is a direct replacement of the original Ford plastic header tank.
Registered Design Right number: 6064605
AIRTEC part no: ATMSFO89
AIRTEC Motorsport MIL light cheater.
If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.
TECHNICAL DATA
AIRTEC spec replacement air filters designed to suit a range of different AIRTEC induction kits. We have worked with a leading brand to create our ideal spec foam air filters to increase performance, enhance sound and look great under the bonnet!
Please see below for model applications and then chose from the drop down menu for the correct filter.
AIRTEC-CC-175-70:
Fiesta Mk7 1.6 ST180 Stage 2 & Stage 3 induction kit
Fiesta Mk8 1.5 ST200 induction kit
AIRTEC-CC-501-70:
Fiesta Mk7 1.0L EcoBoost Stage 2 induction kit
Fiesta Mk8 1.0L EcoBoost induction kit
Renault Clio 200/220 EDC induction kit(s)
Renault Meglio (Megane Powered Clio) induction kit
Renault Megane RS250 induction kit
AIRTEC-CC-175-80:
MQB 1.8T/2.0T EA888 induction kit (Golf R, Audi S3 8V etc.)
Vauxhall Astra H VXR induction kit
Mini F56 JCW induction kit
Ford S-Max 2.5T induction kit
AIRTEC-CC-175-90:
Vauxhall Astra J VXR induction kit
AIRTEC-CC-107L-JS:
Nissan R35 GT-R induction kit
AIRTEC-RP-902:
Mercedes A45 AMG induction kit
This is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement. This part will fit the Fiesta 1.0 EcoBoost, ST180, ST200 & Fiesta ST150
The Yellow bush insert is perfect for everyday use and the odd trackday, close to standard driving experience without the excessive engine movement.
The Purple Bush insert is aimed @ track and race, not recommended for everyday use as the bush is close to solid and will increase cabin noise (not that bad actually) but massivley reduces engine movement for faster gear changes
New Black Series Bush insert Ultimate performance motorsport track and race bushes offering the most precise and accurate driving experience. This bush is nearly 100% solid and is only aimed at the most hard-core track day or serious hard fast road use.
Features
2 x Polyurethane bush inserts
CNC from solid billet alloy, bead blasted and anodised in satin Black
Reduces engine movement and wheel hop on hard acceleration
A must for modified cars
Replaces original ford cast alloy and rubber torque mount
Faster gear changes due to less engine movement
Can be fitted in under 30 minutes with no special tools required
This is why we choose Power Flex
The company operates in a self-contained state of the art factory, manufacturing everything in-house. The stainless steel components are machined on the latest computer controlled equipment to ensure perfect repeatability and quality. The moulding and tooling, design and manufacturing is carried out within the factory ensuring very rapid response time to special projects and complete communication between development, prototyping, testing and manufacturing departments. Component manufacturing is carried out with the latest automatic processing equipment ensuring 100% right first time quality. Testing of new components is carried out both on the vehicle and on test rigs.Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!
AIRTEC Motorsport Universal Oil Cooler
Our new range of AIRTEC Motorsport oil coolers are now available to order.
These compact coolers are suitable for use with either engine or transmission oil and feature a high-flow 12-row core to aid cooling.
They also features cast -8 or -10 male fittings (please select when ordering), to suit standard AN hose connections.
The coolers also incorpoate universal cast mounting points, for easy fitment into any car, feature an AIRTEC embossed logo on the top side and come in a powdercoated satin black finish.
Features:
High-flow 12-row core
Cast mounting points
AIRTEC embossed logo
Satin black finish
Available to suit -8 or -10 AN fittings
AIRTEC Motorsport Weighted Gear Knob.
In a black finish, with your choice of colour ring, finished with the AIRTEC Motorsport logo.
Designed to enhance your driving experience and improve the looks of your interior.
TECHNICAL DATA
AIRTEC Motorsport Weighted Gear Knob.
In a black finish, with your choice of colour ring, finished with the AIRTEC Motorsport logo.
Designed to enhance your driving experience and improve the looks of your interior.
The aluminium gear knob is finished in AIRTEC’s Pro-Series Black hard anodised finish with etched logo, offers a smart and slick look. Designed as a direct screw on replacement of the factory knob, whilst still retaining the reverse gear shift interlock feature.
The black top is separated by a coloured ring, available in Red, Blue, Green, Yellow or white.
Features:
High quality hard anodised finish in Pro-Series Black
Laser etched AIRTEC motorsport logo
Choice of red, blue, green, yellow or white ring
Direct replacement of the OEM part
Will fit the following:
Fiesta MK7 (ST)
Fiesta MK8 (ST)
Focus MK3 ST & RS
MMT6 & IB5+
AIRTEC Part No: ATMSGK01
AIRTEC Front mount Intercooler Features
1 x single pass 50mm core Intercooler with flowed end tanks, this means less welding and a stronger Intercooler
Comes with full fitting instructions & pipe work
No cutting bumper with our intercooler kit
Un-Beatable value for money
Available in Satin Black or Polished Alloy
Airtec 3 year unlimited mileage warranty
Fitting will take 1-2 hours depending on mechanical skill
Finished In Pro-Series Satin Black or Mirror finish Polished Alloy
Proven vertical 50mm core, runs top to bottom of the end tanks this gives the single pass design intercooler the shortest route for the charged air to pass though, with such a small turbo, the faster the charged air can get in & out the better.
Another great must have with our design is making full use of the hottest part of the intercooler, which is the top section, this is on full show allowing maximum Airflow. Tip, more of the grill can be opened up with Dremel or Drill to allow even more Airflow to the intercooler, we suggest to do this whilst fitting.
Airtec intercooler will fit 100PS / 125PS / 135PS and 140PS (Red and Black) models.
AIRTEC part number: ATINTFO35
