Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed!ONLY 25MM LEFT IN BLACKStrengthened, Fortified and immortalised.Our Home brand CEUK Wheel spacers are now made exclusively for us by none other than Eibach in Germany!Lifetime GuaranteeUltra Strong Spacer & StudsBlack & Silver now availableMultiple Stud PatternsPlease ensure you select correctly!Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!
SLIGHT QUALITY ISSUE WITH A HANDFULL ON THE LAST BATCH SO THESE ARE NOW UP FOR CLEARANCE. THE MOULD APPEARS TO HAVE BLED CAUSING LITTLE BITS OF MELTED PLASTIC ON THE CLIPS WHICH NEEDS TRIMMING OFF WITH SNIPS OR A BLADE AND THE OVERALL QUALITY IS ABOUT 20% LOWER THAN EXPECTED. THESE ARE PERFECT FOR A "DIY'ER" WHO WANTS TO HAVE A FIDDLE ON THE CHEAP. NONE RETURNABLE
Ford Performance logo in Red and White as seen in the pictures!
Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each!
Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates.
These items are slightly marked in certain areas, each set is unique and as a result they are on clearance at 50% off - Please note, these are NONE RETURNABLE and NO WARRANTY IS PROVIDED!
All items are brand new, marks may be from production or storage - There is 1 set of each, if the item shows as "Sold out" when you select it, then it has already gone
SET 1: SOLD
SET 2: LEFT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE, RIGHT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE
SET 3: LEFT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE, RIGHT HAS SMALL BLACK MARK ON LED STRIP & SCRATCHES ON LENSE
ITEM DESCRIPTION
The All new Enhanced Edition sequential indicator unit from CEUK for the MK7 Fiesta (Pre Facelift & Facelift)
A fine complement for our LED front and rear indicator offerings!
Simple plug and play unit, installed by simply removing the OEM bulb and lense and replacing with our full replacement Unit!
Amber sequential strobing that is completely canbus friendly!
Smoked Lense
Warranty:
The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty.
CLEARANCE ITEM- ITEMS ARE NONE RETURNABLE AD HAVE NO WARRANTY. PLEASE SEE PICTURES AS THESE ITEMS BOTH HAVE SMALL DEFECTS ON THEM.
Ford Performance logo in Red and White as seen in the pictures!
Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each!
Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates.
Best quality guaranteed!
C:Performance Maf Housing to suit the following Vehicles:
MK7.5 Fiesta ST180 / ST200
70mm Internal Diameter
Made from Cast aluminium then machine finished these were part of our MK7 Fiesta ST180 Intake kits!
These are reduced to clear due to our recent Rebrand from "C:Performance" to "Enhanced Performance"
They come in raw metal and require painting or powder coating - This can be done with a spray can for cost effectiveness making this a really cheap addon, or powder coated for the ultimate finish
Picture does not show screws, however this will be provided with 2x Small threaded screws for the sensor
Designed to work With CEUK/Airtec/Forge etc Stage 2 & 3 intake kits
Features iconic C Logo Raised on both sides
Knurled on silicone hose side to prevent slippage
Machine finished for a perfect fit every time
Will fit any 70mm inlet hose and filter
Replace your Awful Chrome and Red ST badges with our full 4D Replacement's
Made from Premium 3mm Acrylic (6mm total with 2 colours) these come with 3M Tape already applied to stick straight on in place of your existing badges!
Using the latest in Laser technology, these badges are cut with a smooth edge for a perfect finish! And using 3M's best Out door tape, which gets stronger in adverse weather conditions guaranteeing you will never lose them!
Create your own look, with ANY colour Backing and Front to give you a truly Unique experience!
The price shown is for 1 Pair (1 Front Small and 1 Rear Large)
This is NOT a Gel Inlay - Your OEM Badges will need to be removed
Enhanced Performance Replacement Air Filter, with a 70mm diameter inlet, suitable for all Enhanced Performance intake kits or any other intake with a 70mm inlet filter!
Also suitable as a simple upgrade! It is recommended to purchase a maf housing to work with this filter.
Suitable for any vehicle with a 70mm inlet
The replacement Air Filter is supplied pre-oiled and ready for installation.
Big boost pipe kit for the Fiesta ST 180.
The kit includes: 3 hard pipes, 4 Pro Hose silicone hoses & free jubilee clips.
This kit is designed for the modified fiesta ST 180. All pipes have swayed ends to stop the pipes blowing off.
Available with or without symposer take off.
Please note: If fitting with the AIRTEC Motorsport Stage 2 intercooler, please make a note in the shipping notes – Additional hose required.
2.5" bore pipework.
only available in black pipe and black hose
Will fit Fiesta ST 200
The brand new Big Aero wing from Airtec Motorsport is here!
Designed with the help of CEUK based on our MK7 RT330 Track car we are proud to be the first stockist of this amazing item
AIRTEC Motorsport Rear Wing for Mk7 Fiesta
The kit attaches to the car using our bespoke AIRTEC Motorsport designed brackets, that is bolted to the boot lid. Please note, this requires drilling to your boot lid and should be done by a competent professional.
Key features: • Designed and developed in the UK • Tested on track and road with our own Time Attack car • Bespoke laser-cut and powder coated alloy brackets • Unique alloy end plates available in three powder coated colours • High-quality fibreglass centre blade section finished in satin black • Comprehensive fitting kit with all fixtures, fittings, instructions and drilling template
Available in a choice of coloured end plates: Gloss Black Race Red Frozen White
AIRTEC part no: ATMSFO10
Please note: We endeavour to deliver an extremely high quality product but due to the handmade manufacturing process there is the possibility of minor imperfection(s) on the centre wing blade
Suitable for all 3dr MK7 Fiesta ST’s with standard front bumpers. Rear will fit any facelift Fiesta MK7 however front may need a slight adaption by a body shop to fit any “NONE ST’s”
These arches are produced to a very high standard and require painting prior to install
We HIGHLY recommend these are fitted by a bodyshop. They can be fitted without cutting existing arches, but depending how the car sits depends on the work needed. (Without cutting existing arches, you may not be able to sit as low as you want.)
Registered Design Right number 6012610
Is your intercooler looking a bit run down?
AIRTEC logo stencil for all AIRTEC intercoolers, freshen up the look of your intercooler.
Stencils available for all AIRTEC intercoolers.
Small logo size - (31 x 5cm) Ideal for Mini, Fiesta 1.6 Diesel, 1.0 EcoBoost (Stage 1)
Medium logo (44 x 7cm) Ideal for Fiesta MK7 1.0 EcoBoost (Stage 2), Seat Sport, 2.0 TFSI, Astra, Renault Megane.
Large logo (61 x 10cm) Ideal for Focus ST 225, Focus RS MK2, Astra VXR (Stage 3)
Please note: Stencils are not model specific and can be used on any AIRTEC intercooler.
Reduce your stock shift throws with two different positions, ranging from 15% or 25%.
Offering 2-positions truly allows the user more options to fine tune their shift throws!
With a quick and easy installation process the stock shift weight does not need to be removed. This saves time and makes the installation quick and easy.
Made from CNC machined aluminium with engraved AIRTEC Motorsport logo
All hardware is 100% stainless steel including the ball stud.
2-position adjustable between (15% or 25%) reduction
Completely reversible
Installs in approx. 15 minutes
Simple DIY fitting:
Remove gear selector cable from original shifter, using long nose pliers or mole grips.
Install top section of new short shifter which will locate it’s self due to cut out underneath top section.
Then install lower section and new bolts and tighten, simply reconnect gear selector cable.
15% (Lower hole) or 25% (Top hole).
AIRTEC Motosport have designed and released a bolt in roll cage for the Ford Fiesta ST180 and ST200 AND MK7 FL - NO drilling or cutting required.
Designed primarily for use as a show cage/harness bar, these are a quick and easy fit retaining the use of original M10 seat belt mounting points.
Constructed from FIA spec E355+N cold drawn seamless steel, aimed at strengthening and tightening the chassis in a simple and effective manner.
No need for any additional mounting brackets to be welded in.
AIRTEC Motorsport Boost Tap for Fiesta ST 180.
CNC machined billet alloy one piece boost tap, designed to fit between the MAP sensor allowing fitment of turbo boost gauges or external blow of valves.
A simple DIY install, allowing you to still fit the engine cover in place.
AIRTEC Part No: ATMSFO116
AIRTEC Motorsport brake cooling guide for the Fiesta MK7.Designed to stop brake fade and spongy pedal. AIRTEC Motorsport brake cooling guide forces air towards the brakes and calliper when driving, simply mounts to the car using pre-existing holes for a quick and easy install. There is no need to remove fog lights or drill any holes.
Only available in Pro-Series Black
Registered Design Right number 6016420
AIRTEC Part No: ATMSFO38
NOW ONLY AVAILABLE IN ALL BLACK
AIRTEC Motorsport cold side boost pipe to fit Fiesta ST180/ST200
Please note, this item is a symposer DELETE only – Now only available in Pro-Series Black
TECHNICAL DATA
AIRTEC Motorsport cold side boost pipe to fit Fiesta ST180 / ST200
Kit includes: 1 hard pipe, 2 Pro Hoses silicone hose & free jubilee clips.
This kit is designed for the modified Fiesta ST. All pipes have swaged ends to stop the pipes blowing off.
2.5″ bore pipework.
Comes in Pro-Series Black
Please note, this item is a symposer DELETE only – Now only available in Pro-Series Black
AIRTEC part no: ATMSFO78
We’ve developed another solution to our popular enlarged turbo elbow for the Fiesta ST180. This new design features a bespoke one-piece silicone connector to directly replace the original plastic item, or as an alternative to our enlarged alloy design.
AIRTEC part number: ATMSFO121
TECHNICAL DATA
AIRTEC Motorsport Enlarged Turbo Elbow for Fiesta ST180 in Silicone
We’ve developed another solution to our popular enlarged turbo elbow for the Fiesta ST180. This new design features a bespoke one-piece silicone connector to directly replace the original plastic item, or as an alternative to our enlarged alloy design.
The internal dimeter of the new Pro Hoses silicone hose measures 70mm from start to finish, offering uninterrupted flow throughout, compared to other enlarged elbow pipes on the market and is a vast improvement over Ford’s restrictive design.
This solution also fits in place using a two-piece threaded adapter, which bolts to the flange as usual and then allows the new enlarged inlet pipe to easily tighten into place. This design feature means fitting becomes a much easier and simpler process, and is unlike any other on the market.
Features:
Direct replacement
Enhanced induction noise
Improves response and increases performance
70mm continuous internal diameter
10mm larger than original Ford hose
Easy fit two-piece threaded adaptor
Includes new gasket & fitting kit
Fits standard and hybrid turbos
Registered Design Right:
AIRTEC part number: ATMSFO121
AIRTEC Motorsport boost guage kit for Fiesta ST 180.
The AIRTEC Motorsport Fiesta MK7 boost guage kit, supplied with Turbosmart Boost Guage in PSI or BAR.
Simple and classy OE look with no messy wiring.
Comes complete with fitting guide for a quick & simple DIY install.
Kit includes:
Turbosmart backlit boost gauge (Bar or PSI)
Gauge securing ring
Vaccum hose
Bracket and bolts
CNC vaccum take off (Fits onto inlet manifold
Allows exhaust gases to flow much faster. More Power!
Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car)
This part is sold for motorsport and off road use only and will NOT pass an MOT emissions test or police roadside checks.
AIRTEC part no: ATEXHFO7
AIRTEC Motorsport turbo induction elbow for Fiesta ST 180.
Direct replacement of the stock turbo induction pipe which has a very small internal diameter.
Only company supplying with a gasket, to prevent any air leaks or engine management lights.
Features:
10mm larger internal diameter than stock
Direct replacement
Enhanced induction noise
Increased flow for more power
Fits standard turbo and all hybrid turbos with original turbo housing
Optional extra Pro Hose
AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.
AIRTEC Part Number ATMER41:
TECHNICAL DATA
AIRTEC Motorsport Embroidered High-Quality Car Mats
Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver’s and passenger’s side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.
Available for a large range of popular makes and models (right-hand drive only), all mats are tailored for the perfect fit and OEM+ look. Fitted with original retaining/mounting holes where applicable, they come in a set of four to cover both front and back and require no trimming or cutting.
Fits Right-Hand Drive vehicles only
⦁ AIRTEC Motorsport branded complete set of front and rear mats
⦁ Fitted with original retaining/mounting holes where applicable
⦁ High-quality finish in black with white embroidered logo
⦁ Huge range of makes and models available
⦁ Vehicle specific – no trimming required
AIRTEC Part Number: ATMER41
AIRTEC Motorsport lightweight alloy header tank for Fiesta MK7 – Complete with sight glass!
No drilling required, uses original fixing points and is a direct replacement of the original Ford plastic header tank.
Registered Design Right number: 6064605
AIRTEC part no: ATMSFO89
AIRTEC Motorsport hot side lower boost pipe for Fiesta ST 180.
Designed to increase airflow on the Fiesta ST 180 as a replacement of the restrictive standard boost pipe, the AIRTEC Motorsport hot side boost pipe creates a much smother air flow by replacing the restrictive bends and smaller diameter pipe.
Features:
Swaged ends to prevent blowing of on bigger power cars.
Will work perfect with standard or re-mapped Fiesta ST's.
To fit with both, stock and AIRTEC intercooler.
Resonator delete.
Fitting takes less than 30 minutes to install and fits to standard boost hoses.
52mm pipe throughout, compared to the restrictive 42mm resonated standard pipe.
AVAILABLE ONLY IN BLACK FINISH
AIRTEC Motorsport MIL light cheater.
If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.
