Please note: spacers are sold as PAIRS! if you want to do front and rear than qty x2 is needed!ONLY 25MM LEFT IN BLACKStrengthened, Fortified and immortalised.Our Home brand CEUK Wheel spacers are now made exclusively for us by none other than Eibach in Germany!Lifetime GuaranteeUltra Strong Spacer & StudsBlack & Silver now availableMultiple Stud PatternsPlease ensure you select correctly!Please note, Due to the nature and complexity of a wheel spacer, customers MUST know that the size they are ordering is correct prior to ordering by measuring your stud length and wheel groove depth. Unfortunately, if over tightened the integrity of the spacer and / or bolts can be compromised - and due to this, any spacer that has been fitted, trial fitted or removed from its packaging can not be returned! Please be aware of this as by ordering you agree to this!

Read more less

SLIGHT QUALITY ISSUE WITH A HANDFULL ON THE LAST BATCH SO THESE ARE NOW UP FOR CLEARANCE. THE MOULD APPEARS TO HAVE BLED CAUSING LITTLE BITS OF MELTED PLASTIC ON THE CLIPS WHICH NEEDS TRIMMING OFF WITH SNIPS OR A BLADE AND THE OVERALL QUALITY IS ABOUT 20% LOWER THAN EXPECTED. THESE ARE PERFECT FOR A "DIY'ER" WHO WANTS TO HAVE A FIDDLE ON THE CHEAP. NONE RETURNABLE Ford Performance logo in Red and White as seen in the pictures! Number plate surround with Ford Performance logo can be used for front or rear of vehicle - Sold as a Pair so one for each! Add a distinctive look to your Ford with Ford Performance licence plate holders for your vehicle registration plates.

Read more less

WILL FIT ALL MK8 AND 8.5 FIESTA ST - ALL DIESEL MODELS AND OTHER PETROL MODELS PRE 2020 WILL ALSO FIT MK2 PUMA ST Filter TypeFilter Insert Height mm70 Length mm161 Width mm217 Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering!   MANN-FILTER Air Filter It's important to check the condition of your cars air filter at regular intervals; we recommend that your air filter is changed every time your car has an annual or 12,000 mile service. Your cars air filter prevents airborne debris such as dust, leaves and other abrasives finding their way in to the engine's cylinders where it can mix with the lubricating oil and form an abrasive compound. This will cause wear to the cylinders, pistons and bearings causing permanent damage. If your air filter is left neglected it will get dirty and blocked preventing your engine from sucking enough air into the combustion chamber, this will potentially cause your car to run rough and lose power due to the air/fuel ratio being too rich. We recommend that you check the filter size and shape of your air filter with the picture and dimensions available to ensure correct fitment.  

Read more less

 FITS MK8 AND MK8.5 FIESTA / MK2 Puma These items are slightly marked in certain areas, each set is unique and as a result they are on clearance at 50% off - Please note, these are NONE RETURNABLE and NO WARRANTY IS PROVIDED! All items are brand new, marks may be from production or storage - There is 1 set of each, if the item shows as "Sold out" when you select it, then it has already gone SET 1: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 2: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 3: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SCRATCHES ON LENSE SET 4: LEFT HAS STRAIGHT SLIT MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 5: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP SET 6: LEFT HAS SMALL BLACK MARK ON LED STRIP, RIGHT HAS SMALL BLACK MARK ON LED STRIP   ITEM DESCRIPTION The All new Enhanced Edition sequential indicator unit from CEUK for the MK8 Fiesta! A fine complement for our LED front and rear indicator offerings  Simple plug and play unit, installed by simply removing the OEM bulb and lense and replacing with our full replacement Unit! Amber sequential strobing that is completely canbus friendly!  Designed in house by the team at CEUK you will not find these anywhere else with as good a quality  Warranty: The product is provided with a 12 Months guarantee as standard, Unless stated on the product packaging. If the packaging states more than 12 months, the product packaging must be kept to retain the extended warranty. Protected by British Copyright Law Intellectual Property Ownership Reference: 6085957  

Read more less

THIS ITEM IS NONE RETURNABLEPFF19-2225 is an insert only that fits into the original engine mount for reduced engine movement. For a complete mount including bushes please use PFF19-2223. Fits models with the 1.0 Ecoboost engine only. OEM Part Number: H1BG-6P082-AC   Quantity per car 1      

Read more less

PRODUCT DESCRIPTION Handed 1-piece brake discs with 6 grooves on the braking surface to act like a wiper and fully drilled countersunk holes to vent hot gases. Kit contents: 2 discs. 252 mm diameter Final balancing to within 0.01 mm for perfect contact and a quick bedding-in process Anti-rust treatment Strategically placed countersunk holes ensure the disc runs cooler for longer Manufactured from the highest quality carbon steel and heat treated for strength and durability Strada 122 brake pads recommended Download: TÜV-Approval/Part Assessment

Read more less

1.0 EcoBoost Crossover pipe - Fiesta Please note: fits FIESTA ONLY - Focus you will need a different design, please inform our support team or add a note to order advising this is for a FOCUS so we can send the revised bracket! Want it fitted by CEUK? We can fit the Hose And/Or Induction kit from £25 + Vat - give us a call on 0843 289 0182 to arrange. The new CEUK 1.0 Crossover pipe sits between the primary and secondary induction hose on the  cylinder 1.0 engine, and allows more air to pass around your intake system thus giving more power  Improved induction sound as you will hear the air passing through when accelerating and will assist giving a greater blow off sound from your induction kit Features: Swaged ends so induction pipes can't blow off Silver mandrel bent alloy pipe work Uses original fixing points Focus 1.0 engine cover can still be fitted Optional CEUK Logo in numerous colours Fits all Fiesta Mk7/7.5 and Focus MK3 1.0 Eco Boost 100 ps and 125ps, 140ps models  Have you been #Enhanced?

Read more less

Enhanced Performance Turbo Hard pipe for all models of 1.0 EcoBoost A high flow turbo pipe, improving pressure drop across the charge system which in turn improves the efficiency of the engine and improving the ability for additional performance to be added. Made with high quality stainless steel, this pipe comes off the turbo and connects to the charge silicone hose going to the intercooler. Compatible with the following models: Fiesta MK7 1.0 EcoBoost 100ps Fiesta MK7 1.0 EcoBoost 125ps Fiesta MK7 1.0 EcoBoost 140ps Focus MK3 1.0 EcoBoost 100ps Focus MK3 1.0 EcoBoost 125ps Focus MK3 1.0 EcoBoost 140ps Fiesta MK8 1.0 EcoBoost 100ps Fiesta MK8 1.0 EcoBoost 125 ps Fiesta MK8 1.0 EcoBoost 140ps

Read more less

Please note: Will not fit september 2020 models onward as ford have changed the engine! Description The Fully Re-Designed Intake Kit from Enhanced Performance adds both performance and visual beauty to your MK8 Fiesta 1.0 EcoBoost Expect to see gains of around 5-10BHP from stock, this kit will also function exceptionally along side any stage 2 remap. You can also run this induction kit on a fully standard EcoBoost with no issues! Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features Removes ugly original plastic & restrictive airbox. Adds power and torque  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Cone Airfilter CNC sensor boss Powder coated alloy heat-shield with C Performance logo laser cut into it. Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install (See guide here) Whats in the kit? 1x Enhanced Performance MK8 Heat shield powder coated black 1x CNC Sensor Tube 1x Choice of Cone Air Filter 1x Fitting Kit Warranty 12 months as standard! Videos Induction Kit Whilst Driving

Read more less

Help your 1.0 EcoBoost get a much Air into the engine as possible! Transform your 1.0 EcoBoost engine bay, larger diameter pipe-work combined with AIRTEC induction kit means louder waste-gate chatter, similar to Focus RS Mk2  Features Swaged ends so induction pipes can't blow off Silver mandrel bent alloy pipe work Uses original fixing points Focus 1.0 engine cover can still be fitted Increased induction noise AIRTEC induction kit recommended Fits: MK7 Fiesta 1.0 EcoBoost All Models MK3 Focus 1.0 EcoBoost All Models MK8 Fiesta 1.0 EcoBoost All Models (Front Turbo Only)

Read more less

AIRTEC high-flow turbo hard pipe for the Fiesta 1.0 EcoBoost improves the pressure drop across the charge system, improving the efficiency of the engine and improving the ability for additional performance to be added. Made with high quality stainless steel. The AIRTEC turbo hard pipe will improve airflow and turbo noise (dump valve pshhh) Features: High quality hard pipe Easy to fit Compatible with all Fiesta 1.0 EcoBoost models, Mk7 & Mk8 – 100PS, 125PS, 135PS, 140PS (Limited, Red & Black, 164 models).

Read more less