Performance - VW Golf MK7 (2012-2020)

The higher the boost, more fuel and air is needed. To solve the issue with turbo lag, They've created their own designed Leyo Motorsport turbo inlet pipe. This full aluminium piece increases the reliability and unrestricted airflow direct to your turbocharger. With Leyo Motorsport’s research and developers, they've manufactured what we believe to be one of their best and most important performance products, the Leyo Motorsport turbo inlet pipe. More air being sucked into your turbo will allow horsepower gains not seen from OEM units. They’ve enhanced the size of the inlet pipe to give better throttle response, more linear power feed, and more leeway when tuning your performance vehicle. Leyo Motorsport turbo inlet pipe can have on your pride and joy. Be sure you’re quick to order as demand is currently through the wastegate. Designed by Leyo and tested by the Leyo Motorsport team HQ. Full aluminium tubing. CNC Aluminum Shark Fin flange for secure fitment. CNC Aluminum OEM neck for secure fitment Fits all Air Intake system on the market. Smooth, more linear power gains. Larger than the OEM unit for increased air flow. Simple installation Powder coated & laser etched logo. Race Track Proven

Read more less

The APR Billet Stainless-Steel Dogbone / Subframe Mount Insert limits driveline movement, which helps to minimize wheel-hop and torque steer. This provides a more direct driving experience by eliminating slop in the driveline and does so without introducing excessive or uncomfortable driveline vibration and noise. The APR insert is created from thick, billet, stainless-steel. All mounts will slightly deform under use, but unlike all other units created from rubber, polyurethane, and even billet-aluminum, the APR unit will not heavily deform to the point of failure. Rest assured this simple upgrade will last the test of time, unlike others, and packs a limited lifetime warranty against cracking! We offer the mount in two different configurations depending on the style of your factory mount. Be sure to check your subframe mount before purchase.

Read more less

Multilink Axle; Conditions see certificates; Type: G02, 0N4; Threaded Suspension (height adjustable); Lowering ca. [mm]: 30-50 mm; Axle load [kg] to 1160 kg; Axle load [kg] to 1220 kg Strut outside diameter [mm] 55 disconect DCCBilstein B14 (PSS) suspension kits feature ride height adjustability in an OE quality, direct fit package. These kits offer monotube performance dampers with matched springs that are tuned for each specific application. The zinc coated and threaded body design will give you the flexibility to find the perfect ride height setting for your intended use while providing unsurpassed protection against the harshest road elements. B14 (PSS) suspension kits are made in Germany and feature technology tested on the famed Nurburgring.

Read more less

Are you content with the factory exhaust on your Volkswagen GTI but would like to upgrade to larger exhaust tips to properly fill out your diffuser, or just enhance the overall look? ECS Tuning has just what you need with our direct-fit , clamp-on 4.0" Exhaust Tips! Our ECS 4.0" Exhaust Tips were designed and engineered in-house as a direct-fit replacement to the factory tips. Simply cut the spot welds off your factory tips, slide on and clamp down your new ECS tips, then stand back and enjoy.    PART DESIGN Designed and Engineered in-house to fit directly to your OEM exhaust system, after removal of the OE tips Tips are made from T304 Stainless Steel and feature T304 band clamps, stainless bolts and zinc coated nuts Available in either chrome or black chrome finishes Tips feature a 4.0" Double Wall, Rolled Edge, Slant Cut outlet Precision laser etched "ECS Tuning" stacked logo    PRODUCT DEVELOPMENT Our ECS Exhaust Tips were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Requires cutting of the OE exhaust tip spot welds to remove the OEM tip.  Due to the OEM tailpipe length some of the OE pipe may be visible when looking inside the exhaust tip. For an improved aesthetic look you can trim the OE tailpipes to suit by using our Schwaben Exhaust Pipe Cutting Tool -  ES3106581.  Fits 2010 - 2017 Volkswagen GTI's with OEM catback exhaust.

Read more less

High friction formula improves brake effect 30%. Fastest brake pads for Street, Drift & Race Zero brake fade makes this material perfect for fastest driving Capable of repeated heavy brake use without brake “Fall-Off” Very minimal disc/rotor damage characteristics Suitable for shorter track events and race use Medium hardness material feels good at pedal If all you need is stopping power, this is the material choice ECE R 90 type approved for most cars Features red “brake in’ surface coating for instant safe braking after install EBC yellows are ECE Brake safety tested which means they must work perfectly from cold at least as good or better than stock pads. These pads are perfect for occasional track days due to the effectiveness under high temperatures and the bite from cold which cannot be said for other race materials. The Yellowstuff brake pad is R90 approved which means they are tried and tested and can be used on the road throughout Europe.Want the best braking performance? Team the Yellowstuff pads up with the Turbogroove discs and you will not be disappointed.

Read more less

FRONT SPLITTER VW GOLF MK7.5 GTI TCRfits only: VW Golf MK7.5 GTI TCR (2019)   COMPLETE SET CONTAINS:-> Splitter/Front Bumper Lip Spoiler-> Mounting Kit-> Mounting Manual Fitting manual: https://www.maxtondesign.co.uk/pdf/splitter_fitting-manual-maxton.pdf Please note, the majority of our products are made from ABS plastic, the flexibility of these products provides them the ability to withstand some pressure.We highly recommend installations are completed by a professional to ensure the product is fitted correctly and according to our

Read more less

CENTRAL REAR SPLITTER VW GOLF MK7 R ESTATE fits : VW Golf mk7 R Estate version 2013 - 2016   COMPLETE SET CONTAINS:  CENTRAL REAR SPLITTER   Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility.   This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material). Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Rear Side Splitters V.1 VW Golf 7 R / R-Line FITS ONLY:VW Golf 7 R / R-Line (2013-2016) COMPLETE SET CONTAINS:-> Rear Side Splitters (Left + Right)-> Fitting kit-> Fitting manual CHARACTERISTICS:-> Designed using 3D scanning technology to ensure a picture-perfect fit.-> Provides a unique OEM+ finish.-> Lightweight and offers some flexibility.-> This product is made from ABS plastic. The same material is used widely in the automotive industry.MORE INFORMATION:-> No additional work is required to finish the product.-> The product will arrive with a protective film.-> Removal of the protective film will void any returns, only remove once you are certain the product will fit.-> We cannot be held responsible for the incorrect installation or use of this product.-> Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.-> We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.-> This product has been TUV MATERIALGUTACHTEN certified.-> The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.  

Read more less

Pipercross Rectangle Performance Panel Filter Increased Power Lifetime Warranty Improved Fuel economy Direct replacement 30% less restrictive that your OE filter How will a Pipercross panel filter benefit you? Directly replaces the air filter in your airbox30% more airflow over a standard paper air filterLonger lifespan before cleaning required over cottonEasy cleaning, no dirt caught like with V shaped filter groovesBench tested for improved fuel economy, power and torque outputsLifetime warranty on all replacement and performance road use filtersUnlike their competition, Pipercross have adopted multi layered foam technology for their air filters as opposed to cotton or paper. Why? Because foam has a larger capacity for filtration over cotton or paper. In road use terms this means that a Pipercross filter will flow stronger for longer and maintain peak power output of the vehicle over a cotton or paper counterpart. Whilst the cotton or paper filters begin to restrict airflow due to being thinly stretched over a V shaped wire frame the Pipercross with multi layer technology will continue to perform. The low maintenance and long lifespan aspects of a Pipercross filter come from the special triple layer foam that is used on all Pipercross filters. The outer core is coarse foam designed to trap larger particles, the middle core is Medium foam designed to trap most particles and the inner core is fine foam which will trap the remainder of the particles. The triple layer foam design ensures an exceptional level of engine protection in any conditions. (Length 292mm x Width 177mm) Why Choose Pipercross? Pipercross has been making high performance air filters for the motor sport and domestic markets for over 25 years. Based in Northampton, England Pipercross is situated in the country along with some of the biggest names in motorsport engine design and manufacture in the world. In these 25 years our high performance filters have helped many race teams win major championships on the British, European and World stage. The development work carried out whilst dealing with these teams has enabled us to produce some of the most technologically advanced filters on the market. The flexibility of Pipercross's production plant enables us to produce one off bespoke air filters quickly and cost effectively. From the latest WRC cars to a 2CV competition car, Pipercross can design and produce an air filter that can meet and exceed your specifications.

Read more less

REVO TCU SOFTWARE Revo Software to be installed at our Bradford HQ Once purchased, when fulfilling the order we will contact you to book you into our workshop to have the software installed. If you would like to get booked in quicker please give us a phone call on 0843 289 0182. STAGE 2 | STOCK IS38 The DQ250 direct-shift is an electronically controlled dual-clutch gearbox that offers much faster gear changes. The dual clutch allows gears to change instantaneously without losing boost. Improved engine performance from Revo ECU Software means that the stock shift points do not give you the maximum potential that your car has to offer. Revo Transmission Control Unit (TCU) Software ensures your gearbox works in harmony with Revo ECU Software to give you access to even more power. Only The Driven know that quicker gear changes and extended rev-ranges mean more exhilarating power, and as with all Revo Software, you won’t have to compromise on day-to-day driveability. DQ250 DSG GEARBOX Revo TCU Software offers improved response and optimised shift points but maintains the characteristics of Drive and Sports mode. Manual mode now gives you more control by disabling the automatic kick down feature, unlike drive mode where if you plant your foot the gears automatically kick down, allowing you to select the gear you want and make the most of the increased torque from Revo ECU software. Automatic upshift is still active all in modes to offer the best performance and safety for your engine, whilst Dynamic Launch Control allows you to launch at various RPM points depending on your throttle position, improving your 0-60mph times. The result of over two years of extensive development through our Global Development Programme. This Software has been tested in countries from South Africa, Brazil and America to Australia, South Korea, Russia and Germany giving us invaluable data from a wide variety of driving styles and conditions. This ensures the unrivalled quality and performance you demand. SOFTWARE FEATURES DYNAMIC LAUNCH CONTROL Variable RPM launch control via throttle position GLOBAL DEVELOPMENT PROGRAM Extensively tested through our development program OBD INSTALL Revo Software can be installed quickly and safely via the OBD Port   DEVELOPMENT Revo started Developing ECU software in 2014 for the GEN3 EA888 engines, and 12 months later started working on the MQB DSG software to match. Our own in-house Audi S3, VW Golf R and Skoda vRS spent countless hours in the hands of the calibration engineers, 2 years later they had combined over 70,000miles of varied driving throughout the UK on road and track. During the early stages of testing it was established that the cars are capable of very quick launch times once tuned, however, it equally became apparent that the ECU torque strategy needed to be carefully calibrated to help each car achieve optimum performance while keeping factory OEM style drivability and mechanical sympathy for the DSG. 2016 saw the start of the Global Beta test program throughout the Revo Authorised dealer network in Russia, South Africa, Brazil, America, Malaysia, Australia, South Korea, Italy, Germany and Spain to name but a few. This ability to get people driving their own cars provided crucial feedback for Revo to begin to get the product to market, safe in the knowledge we have thoroughly tested all aspects of DSG tuning in collaboration with Revo ECU software.   TECHNICAL DATA Revo Transmission Stage 2 Software has been designed to work with Revo Stage 2 ECU Software. Calibrated for 2 Wheel Drive vehicles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 2500 At 45-60% throttle launch RPM is 3000 At 70% throttle launch RPM is 3250 At 85-100% throttle launch RPM is 3500 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM, 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds Increased clamping pressure Revo Transmission Stage 2 Software has been designed to work with Revo Stage 2 ECU Software. Calibrated for 4 Wheel Drive vehicles fitted with an IS38 Turbo Charger and DQ250 6 speed gearbox. Launch Control variable RPM At 0-30% throttle launch RPM is 3000 At 45-60% throttle launch RPM is 3500 At 70% throttle launch RPM is 3750 At 85-100% throttle launch RPM is 4000 In Launch Control Mode 6300rpm rev limit In Drive and Sports Mode gear shifts at 6500rpm In Manual Mode gear shifts 6600rpm In Drive and Eco mode at low RPM, 2nd gear is held unless you come to a stop Removed 'Kickdown' in Manual mode Optimised shift speeds Increased clamping pressure

Read more less

Racingline Stage 3 Monoblock Big Brake Kit – MQB Platform After almost a year of test and development work, the much-anticipated ‘Stage 3’ Big Brake Kit is now available in four colours and two rotor sizes for 18″/19″ wheels. Boasting a forged monoblock caliper, designed by us from the ground up using the latest FEA Technology we think it’s easily the most dramatic big brake kit on the market – but more importantly it performs like no other. With incredibly stiff monoblock construction, and the highest burst-pressure test ever recorded by Racingline’s development team, it’s no wonder that record 100kph-0 times are being produced. The Racingline Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.The design vision was made possible by an advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail.Each lightweight forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits.The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing. Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent.The kit includes 380mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. Technical Specs Fully-Floating Disc Heat treated FC-25 two-piece Steel Carbon Rotors 355mm rotors (18” wheels) 380mm rotors (19” wheels) Sprung floating hardware for near silent running Vented ‘Triple Groove’ discs with break-in-surface as standard Fast road – Pad supplied with factory pad wear sensor AP pad shape for multiple pad options Goodridge ISO, TUV DOT and ADR approved lines Racingline’s hub adaptor system What’s in the Kit? – Monoblock Front Brake Calipers (Pair)– Caliper Mounting Brackets (Pair)– Full Mounting Bolt Kit– Braided Steel Front Brake Line Set– Sport Brake Pad Set (Fast Road Use)– 380mm Fully Floating 2 Piece Brake Discs (Pair) Notes – 380mm kit will fit under 18″ Alloy Wheels– Factory 19″ wheels and other brands may require spacers– Racingline and Revo 19″ wheels will not require Spacers Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8V) 2012-present Audi RS3 (8V) 2015-present Audi S3 (8V) 2012-present Audi TT (8S) 2014-present Audi TT RS (8S) 2014-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Arteon (2017-present) Volkswagen Golf Mk7 2012-present

Read more less

MQB (Multi-Link) Spring and Damper Kit When it comes to sport dampers the compromise between performance and comfort has been a persistent dilemma for keen drivers and enthusiasts. With the RacingLine Performance Sport Damper kit, which consists of two front and two rear shocks, this dilemma becomes a thing of the past for Golf 7 Platform cars at an affordable price. Fitting the RacingLine Performance Sport Damper kit ensures superior road-holding and a positive transformation in handling characteristics without compromising comfort. Our Sport Dampers are designed to maximise comfort and performance on all road conditions, and driving styles; guaranteeing greater stability, control and therefore driving pleasure. This kit has been designed to work in harmony with RacingLine Performance Sport Springs. In tandem, these upgrades provide the ultimate in handling and comfort. These two upgrades really do make the perfect combination for your car. This kit will fit the following vehicles with a 55mm Front Strut and Multi-Link Rear Suspension only:* Volkswagen Golf Mk7* Audi A3 8V* SEAT Leon Mk3* Skoda Octavia Mk3 Notes: – Not suitable for Audi S3– Not suitable for cars with Mag-Ride/DCC Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8V) 2012-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less