Airtec

New easy fit design with the end of the pipes swayed to stop the pipes blowing off on mapped Focus RS’ Features: Direct replacement! No modding required Billet airflow sensor boss Main induction pipe body is high quality alloy and manderal bent – no welds Super light weight design Alloy has better heat deplacement compared to stainless – so colder air enters the turbo Profiled 3mm thick securing brackets Available in polished or stealthy Pro-Series Black Swaged ends to prevent pipes from coming off Replaces that ugly Ford black plastic Induction pipe in a matter of minutes. Fitting takes only 10 minutes, why not add some of our new stainless steel fitting posts to go with your new induction pipe, these can be added on the options list. Picture 4. Stainless fitting posts are not needed to fit your new alloy induction pipe, they just enhance the overall look. Please note: This product will only fit with the uprated Pro Hoses turbo to crossover. Registered Design Right number: 6033439

Read more less

Proven on big BHP cosworth’s for over 15 years and now available for the Focus RS MK2. The huge Cosworth cone filter is available with Pro-Hose joiner & comes with stainless jubilee clips from the alloy trumpet to induction pipe. Choose silicon hose colour from options. The ultimate induction noise sound & waste gate chatter. Large cotton designed filter with specifically machined alloy trumpets for Focus RS mk2 fitment, no restrictions from cheap trumpet down graders here!

Read more less

TECHNICAL DATA As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our induction kit for the N55 engine fitted in the BMW M135i, M235i, 335i, 435i & M2 non-Competition for fast road or track use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow, whilst improving response, sound and aesthetics within the engine bay. Featuring a large cotton air filter, a laser cut heat shield, enlarged pipework and all fixtures and fittings, the AIRTEC Motorsport induction kit is a direct fit that replaces the restrictive OEM air box and intake set up. To ensure the new air filter doesn’t suffer with heat soak issues from the confines of the engine bay, the heat shield protects the air filter and provides a shroud to ensure it channels fresh air from the front intake. The result is increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay. The kit is a direct replacement that requires no additional drilling or cutting to fit, and comes complete with all the correct fixtures and fittings, as well as detailed instructions. Will fit the following models: 1-Series – F20/F21 M135i(x) N55 – (2011-2015)2-Series – F22/F23 M235i(x) N55 – (2014-2016)3-Series – F30/F31/F34 335i(x) N55 – (2011-2015)4-Series – F32/F33/F36 435i(x) N55 – (2013-2016)M Series – F87  M2 (non-Competition only) – (2016-2017) Features: Comprehensive kit is a direct replacement for original air box and intake Large air filter for improved flow and increased performance Larger pipework to reduce restriction and improve flow Improved soundtrack and under bonnet appearance Laser cut shield protects from heat soak and directs cold air to the filter Long lasting, high quality black powder coat finish Direct fit and comes with all bolts, brackets and fixing Part No: ATIKBMW2

Read more less

As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our Closed Air Induction System suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving flow whilst maintaining low intake temperatures, which improves performance, response, sound and aesthetics within the engine bay. AIRTEC Part No: ATIKYGR02 TECHNICAL DATA As part of our expanding Yaris GR product range, AIRTEC Motorsport is proud to launch our Closed Air Induction System suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving flow whilst maintaining low intake temperatures, which improves performance, response, sound and aesthetics within the engine bay. Having previously designed a shielded induction kit for the Yaris GR model, we were keen to develop a more extensive intake package to offer further improvements. Using our experience from developing and producing our WRC-inspired Closed Air Induction System (CAIS) for the Focus RS that is proven to dramatically increase power and torque, we embarked on developing an entire replacement air box carefully moulded to our design in a GRP composite material to help thermal efficiency. Sealed inside is a large Group-A style cotton air filter that draws fresh air solely from the front intake, ensuring minimal heat soak issues and the lowest possible intake temperatures. Our design also features a replacement MAF housing and rear intake pipe, both 80mm in diameter and finished in black powder-coated finish. The kit comes complete with high quality Pro Hoses silicone connectors, as well as all fixtures and fittings required for a simple installation. The kit is a direct replacement that comes complete pre-built and ready to install. It requires no additional drilling or cutting to fit and comes with detailed fitting instructions.   DYNO TESTEDDeveloped on our own comprehensively modified AIRTEC Motorsport Yaris GR, with the Closed Air Induction System the car produced 335bhp, 5hp more than our open filter induction kit, whilst our thermal imaging camera showed it continued to repel heat build-up from the local area.  Overall, the result is a complete kit that offers increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay that is perfectly suited to the GR. Features: Comprehensive intake kit Enclosed air box ensures the lowest intake temperatures Front intake directs constant feed of cold air to the filter Large cotton air filter for improved flow and increased performance Improved soundtrack and under bonnet aesthetics Long lasting, high quality black powder coat finish on all alloy hard pipes Grp body painted in high gloss black finish Includes all fixtures and fittings AIRTEC Part No: ATIKYGR02

Read more less

AIRTEC Motorsport Induction Kit for Ford Ranger 3.2 TDCI. Designed to improve performance, without changing the OEM factory look of the engine bay. AIRTEC Part No: ATIKFO32 TECHNICAL DATA AIRTEC Motorsport Induction Kit for Ford Ranger 3.2 TDCi Designed to improve performance without changing the OEM factory look of the engine bay. The AIRTEC induction kit utilises the factory air box set up by replacing the restrictive internal components to improve flow.  You can choose from the option of a full induction kit (air filter & silicone hose), AIRTEC by ITG air filter only or Pro Hoses silicone induction hose only. AIRTEC by ITG filter Manufactured by leading air filter supplier ITG, our reusable air filters feature of a galvanised mesh core for added strength under load. The three stage layered foam allows maximum performance from the air filter, which works differently to the paper or cotton alternatives that can be known to trap and retain particles on the outer layer. Using the latest adhesive technologies to bond the foam layers, ITG filter assemblies are totally resistant to water, fumes, oils and fuels – including any exotic fuels used for racing. The filter consists of the ITG Tri-Foam layered system: Stainless-Steel Wire Mesh CoreTo avoid erosion, only the highest quality of steel is used. Coarse Outer LayerStops large pieces of dirt and foreign matter from penetrating further. Straightens air flow into subsequent layers. Medium Grade Mid-LayerSerious filteration layer that traps most of the harmful dirt that leads to engine failure. Fine Inner Layer.Extracts all the fine particles but still allows full air flow to the engine for maximum performance. Pro Hoses Silicone Induction Hose Designed to replace the plastic factory hose, the four-ply silicone hose has a larger internal diameter for increased flow. The smooth internals means no restrictions or loss in power and increased airspeed through the intake s whilst utilising the OEM PCV take-off location. AIRTEC part no: ATIKFO32

Read more less

TECHNICAL DATA AS Performance induction kit, fits MK5/6 Golf PD140 & PD170 Diesel. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features. Removes ugly original plastic & restrictive airbox Adds power and torque More responsive and exciting driving experience Enhanced induction sound Powder coated alloy heat-shield Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install Conclusion. It’s easy to fit, looks great, sounds even better and doesn’t cost the earth.

Read more less

TECHNICAL DATA AIRTEC Motorsport EA888 turbo induction elbow – A simple modification designed to direct and increase air flow into the turbo. The EA888 turbo induction elbow is a much larger diameter, free flowing pipe, designed to replace the small restrictive standard pipe. Works perfectly with our AIRTEC Motorsport induction kit. Features: Larger internal diameterDirect replacement of standard pipeEasy installEnhanced induction noiseIncreased flow for more powerSupplied with new O ringOnly available in pro-series black. AIRTEC Part No: ATMSVAG3

Read more less

TECHNICAL DATA AIRTEC Motorsport induction kit for Astra H MK5 VXR with KO6 / KO6 hybrid turbo setup.Supplied with the AIRTEC branded filter, the kit includes an alloy pipe and 2 Pro Hoses silicone hoses.Silicone hoses in a choice of 10 different colours.Motorsport ‘Satin silver’ or Pro-Series black hard pipes. Kit includes:1x intake pipe2x Silicone hoses1x AIRTEC branded filter   Now available in just all black! Please allow 2-4 weeks for delivery.

Read more less

AIRTEC Motorsport Induction Kit for Renault Megane 3 RS250, 265 and 275 Trophy Designed to work with either a standard or modified example, our carefully developed induction kit offers an enhanced soundtrack through a loud recirculation dump valve noise, improved airflow for increased performance and great looks under the bonnet. The kit comes complete with fixtures and fittings and is a direct replacement for the original. Features: Removes original plastic, restrictive airbox Adds power and increases torque Offers improved response Enhances induction sound and turbo recirculation noise Free flowing air filter MAF sensor pipe Powder coated alloy heatshield Adds style to your engine bay Easy fitting, takes less than 20 minutes to install A simple modification that transforms the look of your engine bay. It’s easy to fit, looks great, sounds even better, doesn’t cost the earth and can be put back to standard within 10 minutes for Renault warranty purposes. AIRTEC part no: ATIKREN5 Registered Design Right number: 6064598

Read more less

AIRTEC motorsport induction kit for the Renault Clio 220 Direct replacement for the original air box, supplied with a cold air feed. Features: Replacement of original air box Cold air feed pipe Pro-series black intake pipe Pro Hoses silicone hose joiner AIRTEC branded foam filter Supplied with all brackets and fittings Please note: Silver pipe for illustration purposes only Registered Design Right number: 6033430 Gloss Black, Race Red, Performance Blue normally kept in stock. Please note: Will not fit phase 2 / Facelift Clio.

Read more less

AIRTEC Motorsport Enlarged Cast High Flow Throttle Body Elbow for MK8 Fiesta ST (Also fits Focus MK4 1.5 ST-Line). PUMA MK2 ST Designed to replace the restrictive OEM pipe, to improve air flow. TECHNICAL DATA   AIRTEC Motorsport Enlarged Cast High Flow Throttle Body Elbow for MK8 Fiesta ST (Also fits Focus MK4 1.5 ST-Line). Designed to replace the restrictive OEM pipe, to improve air flow. Straight forward simple install. Features: Improved air flow Cast CNC machined Simple DIY install All relevant take-offs  

Read more less

Designed to replace the restrictive OEM pipe, this 10mm larger silicone elbow and alloy connector offers increased flow. By reducing restriction within the induction system, air flow improves and potential power increases can be released. The elbow is carefully engineered to be a direct replacement item, which ensures a simple installation process and comes with a gloss black Pro Hoses silicone hose, as well as all fixtures and fittings. Please note: fits PRE-FACELIFT (2017 to 2021) Features: 10mm larger internal diameter than stock Improved air flow for increased power CNC machined Simple DIY installation Direct replacement Enhanced sound Pro Hoses silicone connector Registered Design Right number: 6093143 AIRTEC part no: ATIKHYU2

Read more less