K03/K04 Forge Turbo Blanket - This blanket fits a multitude of applications - Please check the listing below
The Forge turbo blanket is designed to isolate the radiant heat produced by your turbocharger. These turbo blankets have been extensively tested in the harshest environments, road race and track.
The Forge development team have designed this product to withstand the harshest of environments and to assist in the protection and prolonging of your engine components. Its unique design will assist in reducing turbo lag and produce cooler air intake temperatures,
The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.
FITS:
AudiA31.6 TDI 2009-20131.8 TFSi2.0 FSiTA61.8T (B5,B6 Models)RS4(B5) V6S32.0 FSiT (8P Chassis)FordFocusST225SeatLeonMk2 2005-2012Cupra 2.0 TFSiVolkswagenEOSGolfMK5ED30GTIMK6ED35GTIRPassat2.0 FSiTTiguan 2.0 FSiT
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path. More oxygen per unit volume reaches the engine, therefore giving more power.
Fitting the Forge turbo blanket will also prevent the associated engine components from getting heat soaked by the turbocharger.
Aerospace quality Stainless Steel Rivets
Stainless Steel Fasteners
Carbon fabric Outer Shell
Calcium Magnesium Silicate Wool constructed Inner Core
High temperature silica fabric
interior Surface:
Max Temperature Rating: 2150°F
Continuous Use Limit: 1850°F
Exterior Surface:
Direct Contact Limit: 850°F
Radiant Heat Limit: 1250°F
This Product Fits:
Audi 2008-2012 A3Audi 2008-2009 TTAudi 2009-2012 TT QuattroVolkswagen 2009-2012 CCVolkswagen 2009-2012 EOSVolkswagen 2008-2012 GTIVolkswagen 2008-2012 JettaVolkswagen 2006-2010 PassatVolkswagen 2009-2012 TiguanVolkswagen 2012-2014 Golf R
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised
FITS MULTIPLE VEHICLES
The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by the turbocharger. Designed by the Forge development team on the Forge VW Golf MK1 Race car in the harshest of environments and exceeding all expectations, the Forge turbo blanket is designed to assist in the protection and prolonging the life of the engine components.
· Stainless Steel Rivets· Stainless Steel Fasteners· Carbon fabric Outer Shell· Calcium Magnesium Silicate Wool constructed Inner Core· High temperature silica fabric
The unique design will assist in reducing turbo lag and produce cooler air intake temperatures, The Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path.
More oxygen per unit volume reaches the engine, therefore giving more power. This product also fits the vehicles with the following turbochargers:
AudiA1A1 (8X) 2010-20181.4 TSI 2015 OnwardsA31.4 TSI/TFSI 2015 Onwards (8V)S32.0 TSI (8V Chassis)S4B9TTSMk3 8S 316bhp (late 2022-)CupraAteca(up to 2020)Formentor2.0 TSI (310 BHP)SeatIbizaMk4.5 (6P) 2015-20171.4 TSILeonMk3 2012-20201.4 TSI 125/140/150 BHP 2014-2019Cupra 280/290/300RSkodaSuperb280 4x4 DSGVolkswagenArteon(2017-2020)(2020-)GolfMK71.4 TSI 125BHP/138BHP/150BHPGTIGTI Clubsport ED40RMK7.51.4 TSI 138BHP/150BHPGTI RMK8RJettaMK6 (2010-2018)1.4 TSIMK7 (2018-2021)1.4 TSI2.0 GLIMK7.5 (2021-)2.0 GLIPoloGTI 2.0 2018-2020 AW ChassisT6T6 (2015-2019)2.0 TSITiguan2.0 TSI 2017 OnwardsR 2022 Onwards (Gen 4)
Interior Surface:
· Max Temperature Rating: 2300°F/1260°C· Continuous Use Limit: 1832°F1000°C
Exterior Surface:
· Direct Contact Limit: 1800°F/982°C· Radiant Heat Limit: 2500°F/1371°C
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
The Forge Motorsport Turbo Blankets are designed to isolate the radiant heat produced by your turbocharger. This design has been created to withstand the harshest of environments.
The Forge turbo blanket is designed to assist in the protection and prolonging of your engine components and its unique design will assist in reducing turbo lag and produce cooler air intake temperatures,
You will find that the Forge turbo blanket will lose its flexibility over the first few heat cycles as the material cures, so once fitted it should not be routinely removed as you will likely damage the blanket.
Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path.
More oxygen per unit volume reaches the engine, therefore giving more power.
Stainless Steel Rivets
Stainless Steel Fasteners
Carbon fabric Outer Shell
Calcium Magnesium Silicate Wool constructed Inner Core
High temperature silica fabric
This product fits the Subaru models below:
2002 - 2005 Subaru Impreza WRX 2.0L
2006 - 2011 Subaru Impreza WRX 2.5L
2004 - 2011 Subaru Forester 2.5L
2005 - 2009 Subaru Legacy 2.5L
This product has also been fitted to a Subaru fitted with a VF43 turbo
Interior Surface:
· Max Temperature Rating: 2300°F/1260°C· Continuous Use Limit: 1832°F1000°C
Exterior Surface:
· Direct Contact Limit: 1800°F/982°C· Radiant Heat Limit: 2500°F/1371°C
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
TO BE DISCONTINUED ONCE REMAINING STOCK SOLD
Add more air directly to your air filter with our brand new airbox scoop
Designed to work in combination with an open cone intake to direct air straight to where it counts, the filter!
Testing showed that the air when an open cone is installed can flutter around the engine bay before descending on the filter, well not any more!
The perfect partner to our copyrighted ground breaking Air Scoops!
Please note: Made to order, in busy times can take upto 7-10 working days!
Protected by UK Copyright Law: Ref 6122256
TECHNICAL DATA
AIRTEC Motorsport Astra H VXR engine breather kit.
Simple bolt on design that takes less than 30 minutes to install.
Can be fitted with standard hoses or add our optional extra Pro Hoses silicone hoses.
Kit includes:
All fittings and fixtures required to fit
1x breather tank
1x fitting guide
2x OPTIONAL silicone hoses
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,
Purple, Vivid Pink, Nitrous Blue, Ultimate Green, Nitrous Blue
Please allow 2-4 weeks for delivery.
TECHNICAL DATA
AIRTEC Motorsport gearbox breather kit for Astra H MK5 VXR, simple bolt on design.
Designed to reduce oil temperature, increasing the life of the oil and gearbox.
Supplied with all necessary fittings, fixtures and fitting instructions.
Kit includes:
All relevant fittings / fixtures1x Breather tank1x Breather filter1x Gearbox barb fitting1x -8 Oil cooler hose1x Pro Hoses silicone hose
Only available with Gloss Black hoses.
TECHNICAL DATA
AIRTEC Motorsport header tank with sight glass for the Mini R56.
Available in Motorsport Silver or Pro-Series Black.
Comes with standard blue header tank cap.
As part of our expanding Mini product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit R53 Cooper S models.
A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight alloy and comes in a natural silver or high quality powder coated black finish. It also features a sight glass to view the coolant level and comes with an uprated high pressure cap.
The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process.
With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.
Please note: The Stant quick release high-pressure cap displayed in the images is for illustration purposes only, as Stant caps are no longer available. We now supply a replacement quick release high-pressure cap in a similar style.
Features
Direct replacement header tank for the R53 Cooper S
Lightweight aluminium construction
High quality black powder coat or natural silver finish
Sight glass to view coolant level
Uprated high pressure cap included
No drilling or cutting required
All fixtures included as well as fitting instructions
Registered Design Right number: 6049901
AIRTEC part no: ATMSMINI2
AIRTEC Motorsport header tank for Meglio (Megane powered Clio)
This complete kit offers an easy, simple header tank upgrade solution for a Renault Megane turbo converted Clio.
Fits Clio 197 without factory air-con fitted (or air-con delete kit fitted).
Designed and tested in-house at AIRTEC HQ, tested at many UK track days & at the Nürburgring. A must have for a Megane engine swapped Clio 197.
The kit features Pro Hoses silicone connectors, an uprated cap and custom made header tank that is stronger than the original item and offers better heat mangement in a direct replacement solution.
Designed to locate on the left hand side of the engine bay and will fit with either our own uprated AIRTEC alloy radiator, or a stock Megane radiator.
Supplied complete with all fixtures and fittings for an easy and professional installation.
Finished in a choice of Pro-Series Black or Natural Silver.
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange,
Purple, Vivid Pink, Nitrous Blue, Ultimate Green, Nitrous Blue
Please allow 2-4 weeks for delivery.
AIRTEC Motorsport induction kit and breather tank combo for Meglio (Megane powered Clio)
This complete package offers an easy, simple induction kit upgrade solution together with improved engine oil breather for a Renault Megane turbo converted Clio.
Fits Clio 197 without factory air-con fitted (or air-con delete kit fitted).
Designed and tested in-house at AIRTEC HQ, tested at many UK track days & at the Nürburgring. A must have for a Megane engine swapped Clio 197.
The induction kit features an AIRTEC foam air filter, hard pipe, Pro Hoses silicone connector and laser cut heat shield which together offers improved air flow, better heat management and increased power in a direct replacement solution. The kit does require the battery to be re-located to install.
The engine oil breather kit features Pro Hoses silicone connectors and a custom made baffled breather tank that vents to atmosphere through a mini filter and allows the engine to breathe more freely.
Supplied complete with all fixtures and fittings for an easy and professional installation.
The new VUDU Battery Tie down for the Puma MK2 ST is a little bit of style that that will enhance the visual aesthetics of your engine bay.Designed as a direct replacement for the OEM battery tie down.Made using billet aluminium and laser etched with the trademark VUDU the Battery tie down with its sleek design is rigid enough to keep your battery in place with the bonus of giving your engine bay added beauty.
TECHNICAL DATA
AIRTEC Motorsport PUMA MK2 ST 1.5 EcoBoost Engine Breather
Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves
One of the only kits designed with a dipstick allowing you to check the oil level inside the catch can so you know when to drain it
Supplied with step by step instructions giving this an easy DIY install, taking less than 30 minutes to fit
Features:
Baffled oil catch can
Oil level dipstick
x2 Pro Hoses silicone hoses
Step by step fitting guide
Helps reduce carbon build up on intake valves
WILL fit with AIRTEC induction shield in place.
Only available in Pro-Series Black!
Registered Design Right number:
AIRTEC Part No: ATMSFO112
The new VUDU Battery Tie down for the Fiesta ST180 and the ST MK8 is a little bit of style that that will enhance the visual aesthetics of your engine bay.Designed as a direct replacement for the OEM battery tie down.Made using billet aluminium and laser etched with the trademark VUDU the Battery tie down with its sleek design is rigid enough to keep your battery in place with the bonus of giving your engine bay added beauty.
MMR Performance Oil Catch Can Kit For The BMW M135i / M235i / M2
As with all MMR components, this oil catch can kit has been designed to offer added performance, allow easy installation and enhanced aesthetics too.
Engineered specifically for N55 BMW M135i, M235i and M2 owners looking for optimum performance, the MMR Performance Oil Catch Can Kit removes any unwanted oil from the Positive Crankcase Ventilation system before it can be recirculated back into the intake and cause potential damages to the way your BMW model performs. The separation process put into place by the Oil Catch Can Kit results in a cleaner, more reliable and better performing engine, which is particularly beneficial on the higher mileage BMW engines that suffer with sludge and carbon build up.
Constructed in only the finest of quality T-6061 billet filter housing and anodised in MMR Performance's trademark hue, the upper section of the MMR Performance Oil Catch Can features a pathway the oil vapour flows through, incorporated within that is a filter to ensure any oil is separated effectively and allowed to accumulate at the bottom of the can, away from causing any harm to your BMW internals.
Key Features:
Effectively prevents oil build-up in the intake system and intercooler walls
Maintains optimum engine performance
Easy installation with all supplied hardware included
Race fittings and PTFE-lined hoses throughout
Easy oil level checking and draining
Checking the oil level within the catch can kit is easy thanks to the integrated dipstick. If oil needs to be drained, this can be done from the cap-head bolt mounted in the base of the catch can, or if you prefer, the lower section can be easily unscrewed and removed with the rest of the breather setup still in place.
Fitting of the MMR Oil Catch Can Kit is simple enough, mounting straight to the existing mounting points. There is no need for any drilling and can even be used in conjunction with the OEM engine cover still in place.
Please contact a member of the team at AET Motorsport for any additional information you require regarding the MMR Performance Oil Catch Can Kit, our dedicated team of BMW tuning experts are on hand to answer any of your questions.
The Billet Oil Cap for BMW by MMR Performance is the latest under-bonnet accessory to instantaneously increase the aesthetics of your car.
Built from billet T-6061 aluminium, and with its sleek design allows it to be easily fitted into any engine to give it that extra style.
Available in either Deep Black or Dark Anthracite you have the choice of blending into the shadows or standing out in the crowd, whichever suits your style.
This filler cap will fit all engines with the rounded filler cap which includes all BMW engines post 2007.
Ford Focus MK1 Bonnet Strut Kit (1998-2004)
The NB Styling Focus MK1 Bonnet strut kit completes the look of any Mk1 Focus, from the humble base model to the heavily modified Focus ST170 or RS
Focus MK1 Bonnet Strut Kits available in Standard BLACK
Why Buy this Bonnet strut kit?
First of all, NO more having to lift and hold the heavy bonnet while you fiddle with the prop.
Because it LOOKS like it was fitted from new IDEAL for shows to complete the dressed engine bay lookOPEN Bonnet held firmly rather dropping on a windy day.GOOD RE-SALE Value , should you decide to sell your car, most importantly the kit can be easily removed without damage to your car.
Easy to fit in about 15 minutes. So hence our motto….”Styling made simple”. Where we can we refine each design to be as simple and intuitive to fit as possible with the least amount of tools needed.
“No cutting or drilling…” This is what we keep in mind when designing and producing an NB Styling bonnet strut kit. First of all, NOBODY wants to start drilling holes or cutting bits off their pride and joy to fit another modification. This is why ALL our kits are bespoke to the car it is made for and will not fit any other vehicle. We are Car Enthusiasts and try very hard to give each kit that OEM look, certainly what car modifiers look for.
Lesser generic kits are just about making a profit, therefore no thought has gone into the design. Hence why they look “Not part of the car”
Our kit requires only a 10mm& 13mm spanner and a small screwdriver to fit.
The Standard Kit contains…
Steel Brackets ( Zinc coated then Powder coated Black)2 x Pressurised struts (Black or Stainless)And all new stainless steel washers and boltsOnline Fitting Instructions link
CLICK HERE for FITTING GUIDE
Vauxhall Corsa D Bonnet Strut Kit (2007-2016)
The NB Styling Corsa D Bonnet strut kit completes the look of any Corsa D, from the humble base model to the heavily modified Corsa d VXR.
Corsa D Bonnet Strut Kits available in Standard BLACK
Why Buy this Bonnet strut kit?
First of all, NO more having to lift and hold the heavy bonnet while you fiddle with the prop.
Because it LOOKS like it was fitted from new IDEAL for shows to complete the dressed engine bay lookOPEN Bonnet held firmly rather dropping on a windy day.GOOD RE-SALE Value , should you decide to sell your car, most importantly the kit can be easily removed without damage to your car.
Easy to fit in about 15 minutes. So hence our motto….”Styling made simple”. Where we can we refine each design to be as simple and intuitive to fit as possible with the least amount of tools needed.
“No cutting or drilling…” This is what we keep in mind when designing and producing an NB Styling bonnet strut kit. First of all, NOBODY wants to start drilling holes or cutting bits off their pride and joy to fit another modification. This is why ALL our kits are bespoke to the car it is made for and will not fit any other vehicle. We are Car Enthusiasts and try very hard to give each kit that OEM look, certainly what car modifiers look for.
Lesser generic kits are just about making a profit, therefore no thought has gone into the design. Hence why they look “Not part of the car”
Our kit requires only a 10mm & 13mm spanner to fit.
The Standard Kit contains…
Steel Brackets ( Zinc coated then Powder coated Black)2 x Pressurised struts (Black or Stainless)And all new stainless steel washers and boltsOnline Fitting Instructions link
CLICK HERE for FITTING GUIDE
The NB Styling PUMA 2020 Bonnet strut kit complete the look of the NEW PUMA, from the humble base model to the heavily modified ST-Line
STRUTS COME IN BLACK
Why Buy this Bonnet strut kit?
First of all, NO more having to lift and hold the heavy bonnet while you fiddle with the prop.
Because it LOOKS like it was fitted from new IDEAL for shows to complete the dressed engine bay lookOPEN Bonnet held firmly rather dropping on a windy day.GOOD RE-SALE Value , should you decide to sell your car, most importantly the kit can be easily removed without damage to your car.
Easy to fit in about 15 minutes. So hence our motto….”Styling made simple”. Where we can we refine each design to be as simple and intuitive to fit as possible with the least amount of tools needed.
“No cutting or drilling…” This is what we keep in mind when designing and producing an NB Styling bonnet strut kit. First of all, NOBODY wants to start drilling holes or cutting bits off their pride and joy to fit another modification. This is why ALL our kits are bespoke to the car it is made for and will not fit any other vehicle. We are Car Enthusiasts and try very hard to give each kit that OEM look, certainly what car modifiers look for.
Lesser generic kits are just about making a profit, therefore no thought has gone into the design. Hence why they look “Not part of the car”
Our kit requires only a 10mm spanners to fit.
The Standard Kit contains…
Steel Brackets ( Zinc coated then Powder coated Black) or Painted2 x Pressurised struts (Black or Stainless)And all new stainless steel washers and boltsOnline Fitting Instructions link
This listing is for pre order - the first batch is due in the first week of october!
The NB Styling KUGA Mk2 Bonnet strut kit complete the look of any Kuga, from the humble base model to the Kuga ST line X
Why Buy this Bonnet strut kit
First of all, NO more having to lift and hold the heavy bonnet while you fiddle with the prop.
Because it LOOKS like it was fitted from new IDEAL for shows to complete the dressed engine bay lookOPEN Bonnet held firmly rather dropping on a windy day.GOOD RE-SALE Value , should you decide to sell your car, most importantly the kit can be easily removed without damage to your car.
Easy to fit in about 15 minutes. So hence our motto….”Styling made simple”. Where we can we refine each design to be as simple and intuitive to fit as possible with the least amount of tools needed.
“No cutting or drilling…” This is what we keep in mind when designing and producing an NB Styling bonnet strut kit. First of all, NOBODY wants to start drilling holes or cutting bits off their pride and joy to fit another modification. This is why ALL our kits are bespoke to the car it is made for and will not fit any other vehicle. We are Car Enthusiasts and try very hard to give each kit that OEM look, certainly what car modifiers look for.
Lesser generic kits are just about making a profit, therefore no thought has gone into the design. Hence why they look “Not part of the car”
Our kit requires only a 10mm spanners to fit.
The Standard Kit contains…
Steel Brackets ( Zinc coated then Powder coated Black) 2 x Pressurised struts (Black)And all new stainless steel washers and boltsOnline Fitting Instructions link
CLICK HERE FOR INSTRUCTIONS
TECHNICAL DATA
AIRTEC Motorsport Fiesta MK8 ST 1.5 EcoBoost Engine Breather
Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves
One of the only kits designed with a dipstick allowing you to check the oil level inside the catch can so you know when to drain it
Supplied with step by step instructions giving this an easy DIY install, taking less than 30 minutes to fit
Features:
Baffled oil catch can
Oil level dipstick
x2 Pro Hoses silicone hoses
Step by step fitting guide
Helps reduce carbon build up on intake valves
WILL fit with AIRTEC induction shield in place.
Only available in Pro-Series Black!
Registered Design Right number:
AIRTEC Part No: ATMSFO112
Mk7 Ford Fiesta Oil Cap From VUDU Performance
We are proud to introduce to you the Ford Fiesta Oil Filler Cap from VUDU Performance. Dress your engine bay with a touch of VUDU brilliance with this Fiesta ST Oil Cap providing a direct replacement for the plastic and dull looking design of the OEM version.
This precision machined solution not only offers an aesthetically pleasing upgrade with the signature VUDU Performance logo but it also offers a far stronger construciton quality that will no longer be pronte to fatigue.
CNC Machined from aircraft grade billet aluminium and hard anodised in anthracite grey with laser etched VUDU branding this is the most highly detailed oil cap on the Fiesta market.
Fitting both the Mk7 ST and 1.0 EcoBoost Fiesta. this VUDU Performance design is also an engine bay Mk3 Focus ST Oil Cap upgrade that Focus owners can take advantage of!
VUDU Performance Oil Cap Fitment:
Ford Fiesta ST180 Mk7
Ford Fiesta 1.0 EcoBoost Mk7
Ford Focus ST Mk3
It's not just the VUDU Performance Oil Filler Cap that can add a touch of VUDU to your engine bay! Take a look at the VUDU Coolant Cap for that total transformation!
VUDU Oil Management System For The Ford Fiesta ST180
Oil Control Has Been Mastered By VUDU!!
The VUDU Ford Fiesta ST180 Oil catch can system is finally in manufacture having been vigorously tested in house on our very own VOODOO Race car. Purchasing products that are tried and tested on our UK Time Attack Championship leading and Nurburgring tested Fiesta ST180 provides you with the peace of mind that the quality you are purchasing is only to the signature high standard that we set ourselves at AET Motorsport.
This Catch Can is not only a fantastic oil management tool but its also an aerospace T6 Billet aluminium construction that adds a touch of VUDU magic to your otherwise dull looking engine bay. The VUDU Fiesta catch can shares little similarity with its cheap counter parts available online with this Catch Can Kit comprising the baffled internals to ensure ultimate oil control among other features.
Check the oil collection in your catch can quickly and easily with our built in oil dip stick before removing to empty. This avoids a hazed spy glass and unnecessary removal and refit.
What does it do?
Fords range of ECOBOOST engines are among a long line of Direct injection engines (the injector is under high pressure and fires fuel directly into the cylinder) that inherently suffer from valve choking due to the oil build up around the cylinder head and valves. Couple this with the increased oil mist passing through the intake and cooling system of your Ford Fiesta ST180 leaves unnecessary build up within the pipe work, intercooler, turbo and inlet manifold. The VUDU Oil Catch Can Kit is without a doubt a MUST HAVE item to prevent any of these unnecessary problems from occurring.
Whats in the box:
VUDU Catch Can 2 Piece System
VUDU Oil Level Dip Stick
VUDU Bracket Mounting System (Fiesta ST180)
Silicone Hose
Key Features:
Amazing aerospace quality billet material.
Built in baffle and condenser.
Oil dipstick for easy maintenance.
Billet Machined fittings ensuring no leaks.
Prestigious VUDU branding.
Check out this awesome product video explaining what goes into the VUDU Oil Management system.
NB Styling Bonnet strut Kit for the Ford Focus mk2 (2005-2011).
The NB Styling Bonnet strut kit complete the look of any Mk2 Focus, from the humble base model to the heavily modified Focus RS
Bonnet Strut Kits available in Standard BLACK
Why Buy this Bonnet strut kit?
First of all, NO more having to lift and hold the heavy bonnet while you fiddle with the prop.
Because it LOOKS like it was fitted from new IDEAL for shows to complete the dressed engine bay lookOPEN Bonnet held firmly rather dropping on a windy day.GOOD RE-SALE Value , should you decide to sell your car, most importantly the kit can be easily removed without damage to your car.
Easy to fit in about 15 minutes. So hence our motto….”Styling made simple”. Where we can we refine each design to be as simple and intuitive to fit as possible with the least amount of tools needed.
“No cutting or drilling…” This is what we keep in mind when designing and producing an NB Styling bonnet strut kit. First of all, NOBODY wants to start drilling holes or cutting bits off their pride and joy to fit another modification. This is why ALL our kits are bespoke to the car it is made for and will not fit any other vehicle. We are Car Enthusiasts and try very hard to give each kit that OEM look, certainly what car modifiers look for.
Lesser generic kits are just about making a profit, therefore no thought has gone into the design. Hence why they look “Not part of the car”
Our kit requires only a 10mm & 13mm spanner and a small screwdriver to fit.
The Standard Kit contains…
Steel Brackets ( Zinc coated then Powder coated Black)2 x Pressurised struts (Black)And all new stainless steel washers and boltsOnline Fitting Instructions link
The NB Styling Focus MK4 Bonnet strut kit complete the look of any Mk4 Focus, from the humble base model to the heavily modified Focus ST.
COME IN BLACK!
Why Buy this Bonnet strut kit?
First of all, NO more having to lift and hold the heavy bonnet while you fiddle with the prop.
Because it LOOKS like it was fitted from new IDEAL for shows to complete the dressed engine bay lookOPEN Bonnet held firmly rather dropping on a windy day.GOOD RE-SALE Value , should you decide to sell your car, most importantly the kit can be easily removed without damage to your car.
Easy to fit in about 15 minutes. So hence our motto….”Styling made simple”. Where we can we refine each design to be as simple and intuitive to fit as possible with the least amount of tools needed.
“No cutting or drilling…” This is what we keep in mind when designing and producing an NB Styling bonnet strut kit. First of all, NOBODY wants to start drilling holes or cutting bits off their pride and joy to fit another modification. This is why ALL our kits are bespoke to the car it is made for and will not fit any other vehicle. We are Car Enthusiasts and try very hard to give each kit that OEM look, certainly what car modifiers look for.
Lesser generic kits are just about making a profit, therefore no thought has gone into the design. Hence why they look “Not part of the car”
Our kit requires only a 10mm & 13mm spanners to fit.
The Standard Kit contains…
Steel Brackets ( Zinc coated then Powder coated Black) or Painted2 x Pressurised struts (Black or Stainless)And all new stainless steel washers and boltsOnline Fitting Instructions link
