All

VAAGSport High Flow Turbo Elbow for MQB EA888 Gen.3 Engines Volkswagen Mk7 Golf R/GTI, Audi S3 8V, TTS 8J, SEAT Cupra 280/290/300, Skoda Octavia Mk3 VRS (TSI) Elegant design and practical gains. Removing the restriction to the stock IS38/IS20 turbo air flow is paramount, an increased dose of cold air to the turbo gives a extremely worthwhile power gains. Compatible with all 1.8T & 2.0T EA888.3 vehicles, the VAAGSport Turbo Elbow should be one of your first considerations for improving the vehicles air intake system. A great idea on a stock engine, essential on a tuned vehicle. Works even better when combined with the VAAGSport 3” high capacity intake hose and high flow air filter. Suitable for up to Stage 3 tuning (with supporting mods) What’s Included High Flow Turbo Elbow Inlet Note If you are planning to use this item on an Ibiza 1.8TFSI, Polo 1.8TFSI or Audi S1 2.0TFSI – You will need to purchase an additional PCV Breather Pipe.The part number for this is 06K 103 213A and it can be ordered from here. Comparing stock to VAAGSport

Read more less

VAAGSport Turbo Muffler Delete for 1.8T/2.0T MQB EA888 Gen.3 Engines Volkswagen Mk7 Golf R/GTI, Arteon 4Drive, Audi S3 8V, TTS 8J, SQ2, SEAT Cupra 280/290/300, Skoda Octavia Mk3 VRS (TSI), Cupra Ateca 4Drive Removes the turbulent OEM muffler on the turbocharger. The original muffler essentially acts as a suppressor reducing the turbo sound that tuners and drivers love. The VAAGsport kit has duel seals set into machined grooves so they not only ensure a perfect seal and no boost loss but makes the kit super easy to install. What’s Included Turbo Muffler Delete Comparing stock to VAAGSport

Read more less

Vauxhall Corsa D Bonnet Strut Kit (2007-2016) The NB Styling Corsa D Bonnet strut kit completes the look of any Corsa D, from the humble base model to the heavily modified Corsa d VXR.  Corsa D Bonnet Strut Kits available in Standard BLACK  Why Buy this Bonnet strut kit? First of all, NO more having to lift and hold the heavy bonnet while you fiddle with the prop. Because it LOOKS like it was fitted from new IDEAL for shows to complete the dressed engine bay lookOPEN Bonnet held firmly rather dropping on a windy day.GOOD RE-SALE Value , should you decide to sell your car, most importantly the kit can be easily removed without damage to your car. Easy to fit in about 15 minutes. So hence our motto….”Styling made simple”. Where we can we refine each design to be as simple and intuitive to fit as possible with the least amount of tools needed. “No cutting or drilling…” This is what we keep in mind when designing and producing an NB Styling bonnet strut kit. First of all, NOBODY wants to start drilling holes or cutting bits off their pride and joy to fit another modification. This is why ALL our kits are bespoke to the car it is made for and will not fit any other vehicle. We are Car Enthusiasts and try very hard to give each kit that OEM look, certainly what car modifiers look for. Lesser generic kits are just about making a profit, therefore no thought has gone into the design. Hence why they look “Not part of the car” Our kit requires only a 10mm & 13mm spanner to fit. The Standard Kit contains… Steel Brackets ( Zinc coated then Powder coated Black)2 x Pressurised struts (Black or Stainless)And all new stainless steel washers and boltsOnline Fitting Instructions link CLICK HERE for FITTING GUIDE

Read more less

Upgrade to the right hand engine mount used on all petrol engined Fiestas from 2008-2017. It gives significant reduction in engine movement under extreme conditions at the same time offering outstanding vibration isolation performancePlease note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

This actuator is designed for the Volkswagon Golf and Polo 1.8T engines that are transversely mounted. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACVAG03/G Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description Highlights: UV, temperature, and water-resistant Designed to locate in the OEM factory position Finished in high quality clear coat to ensure UV-protection and extra durability Take an already incredible vehicle, pop the bonnet and view the engine with no cover in place, yeah, its bit of an anti-climax. This is how many owners feel when showing off there EA888 Gen 4 engine as unfortunately the VAG group have recalled the engine covers due to a potential fire risk leaving the engine looking unfinished and disappointing, For those reasons, we took the OEM engine cover and improved it. Our cover fits on the original mounting locations, is water-resistant, and takes each heat cycle of the engine with ease. Not only that, it's finished in high quality clear coat to ensure UV-protection and extra durability.   Compatable Vehicles: Audi S3 2.0TSI (8Y Chassis) TT 45 TFSI (8S) TTS Mk3 8S 316bhp (late 2022-) Cupra Ateca VZ1, VZ2, VZ3, VZN 2021- Formentor 2.0 TSI (245 BHP) 2.0 TSI (310 BHP) Skoda Kodiaq RS 2021- Octavia 4 RS Volkswagen Arteon 2.0 TSI Golf MK8 Clubsport 45 GTI R T-Roc R (2022 Onwards) Tiguan R 2022 Onwards (Gen 4)   It fits perfectly with the Forge carbon intake and Forge turbo inlet pipe solution, which as a trio will completely transform your car engine bay! It is almost guaranteed that you will get some fingerprint marks/smudges on the engine cover during the installation, that's why we send our Forge engine cover in a microfibre bag. You can use the bag along with the Meguiar's Care Pouch to give your new car engine cover a fresh shine!  Manufactured by an autoclave process. This involves the use of up to 10BAR of pressure that is blown into a 100% billet mould to force the material out. This high amount of pressure ensures the carbon fibre is fully in contact with the surface of the mould, therefore, making sure the weave is tight, solid, and strong; this process will also ensure there are no imperfections in the product. In the Box:1 x Forge Carbon Engine Cover1 x Forge Micro Fibre Bag1 x Meguiar’s Care Pouch1 x Forge Decal   The Forge range of carbon fibre products are manufactured to the highest standards utilising the absolute best materials available. However, in certain applications and in areas of extreme temperature, this can lead to discolouration or fading (yellowing) of the carbon fibre. Unfortunately, due to this harsh and extreme environment, your Forge carbon fibre is not warrantied for that eventuality. All other aspects of your carbon fibre products are covered by our warranty process.

Read more less

The Original ford camcover doesn't look great does it? well our new Bolt on design camcover will sort that out nicely. Easy bolt on Design, will finish off your Camshaft cover a treat! Fits All 1.6 Petrol Fiesta Mk7 Zetec models (Except ST) Comes with stainless steel fittings, please choose from plain or logo. Please note, come with full instructions and fittings. Very Basic Mechanical Knowledge needed to fit.

Read more less

The Original ford camcover doesn't look great does it? well our new Bolt on design camcover will sort that out nicely. Easy bolt on Design, will finish off your Camshaft cover a treat! Fits All 1.25 & 1.4 Petrol Fiesta Mk7 Zetec models Comes with stainless steel fittings, please choose from plain or logo.

Read more less