All

WILL FIT ALL MK8 AND 8.5 FIESTA ST - ALL DIESEL MODELS AND OTHER PETROL MODELS PRE 2020 WILL ALSO FIT MK2 PUMA ST Filter TypeFilter Insert Height mm70 Length mm161 Width mm217 Please note: This will not fit Post 2020 EcoBoost models as there was a change to the shape - please ensure you check the shape VS your own airbox before ordering!   MANN-FILTER Air Filter It's important to check the condition of your cars air filter at regular intervals; we recommend that your air filter is changed every time your car has an annual or 12,000 mile service. Your cars air filter prevents airborne debris such as dust, leaves and other abrasives finding their way in to the engine's cylinders where it can mix with the lubricating oil and form an abrasive compound. This will cause wear to the cylinders, pistons and bearings causing permanent damage. If your air filter is left neglected it will get dirty and blocked preventing your engine from sucking enough air into the combustion chamber, this will potentially cause your car to run rough and lose power due to the air/fuel ratio being too rich. We recommend that you check the filter size and shape of your air filter with the picture and dimensions available to ensure correct fitment.  

Read more less

Modern direct injection engines are efficient and powerful, but are prone to carbon deposits that build up inside the intake port and on the back-side of intake valves. These deposits rob the engine of power and efficiency. Traditional methods of manually removing these deposits can be difficult, time consuming, and expensive. The 034Motorsport Direct Injection Head Port Cleaning Tool makes short and easy work of removing these deposits from your intake ports and valves. The tool has a small port for a media blasting wand and a large port that connects to a shop vacuum hose. The vacuum generated by the shop vac holds the tool in place up against the intake port, freeing your hands to focus on the media blasting. To use, simply rotate the crankshaft to close the intake valves in a given intake port before positioning the Direct Injection Head Port Cleaning Tool on the intake port. Turn on the vacuum and media blast away. All of the blasting media is sucked into the shop vac, making the entire process quick and easy, with little to no clean-up necessary afterwards. Features:Machined from Billet 6061-T6 Aluminum For DurabilityClear Anodized for an Attractive, Corrosion Resistant FinishFits Standard 40mm (1 1/2") ShopVac HoseAccommodates Media Blast Wands Up to 10mm (3/8") in DiameterMakes Carbon Cleaning of Direct Injection VAG Engines Much Easier and Faster What's Included:Direct Injection Head Port Cleaning Tool (x1)Lots of Additional Free Time Fitment Guide:See Fitment Guide Tab for Extensive List of Applications Frequently Asked Questions:Does this fit the cylinder head without injector removal? - YESDoes this fit the B7 RS4 heads without injector removal? - YESNote: For 2.0 motors, it is easier to use this tool with the injectors removed, and the 2.0 injectors are easy to remove.   Suitable for: Shop By Car/Audi/RS7 (C7) Shop By Car/Audi/Q3 (Mk1 11-18) Shop By Car/Audi/A6 (C7) Car Care/Tools Shop By Car/Audi/A6 (C6) Shop By Car/SEAT/CUPRA/Exeo Shop By Car/Skoda/Roomster Shop By Car/SEAT/CUPRA/Ibiza Mk5 (6J) Shop By Car/Audi/TT Mk2 (8J) Shop By Car/Audi/S4 (B7) Shop By Car/Audi/S4 (B6) Shop By Car/Audi/RS5 (B8) Shop By Car/Audi/RS4 (B7) Shop By Car/Audi/RS3 (8P) Shop By Car/Audi/R8 Mk1 (42 06-15) Shop By Car/Audi/A8 Shop By Car/Audi/A7 (4G8 10-17) Shop By Car/Audi/A5 (B8) Shop By Car/Audi/A4 (B8) Shop By Car/Audi/A4 (B7) Shop By Car/Volkswagen/Tiguan (Mk1) Shop By Car/Volkswagen/Passat B6 Shop By Car/Volkswagen/EOS Shop By Car/Audi/A4 (B9) Shop By Car/Audi/A5 (B9) Shop By Car/Skoda/Fabia Mk3 (NJ) Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Golf Mk5/Maintenance / Tools Shop By Car/Audi/S3 (8V)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Ateca Shop By Car/Audi/Q2 Shop By Car/Audi/S6 (C7) Shop By Car/Volkswagen/Golf Mk7/Maintenance / Tools Shop By Car/Skoda/Karoq Shop By Car/Skoda/Kamiq Shop By Car/Volkswagen/Golf Mk6/Maintenance / Tools Shop By Car/Skoda/Octavia Mk3 (5E)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk2 (5J)/Maintenance / Tools Shop By Car/Audi/S6 (C6) Shop By Car/Audi/A3 (8P 03-13)/Maintenance / Tools Shop By Car/Audi/A3 (8V 12-20)/Maintenance / Tools Shop By Car/Audi/S3 (8P)/Maintenance / Tools Shop By Car/Audi/TT Mk3 (8S)/Maintenance / Tools Shop By Car/Audi/S5 (B8)/Maintenance / Tools Shop By Car/Audi/TT RS (8J)/Maintenance / Tools Shop By Car/Skoda/Fabia Mk1 (6Y)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Maintenance / Tools Shop By Car/Volkswagen/Beetle (16)/Maintenance / Tools Shop By Car/SEAT/CUPRA/Formentor Shop By Car/Audi/RS6 (C7)/Maintenance / Tools     Code: 034-034-108-Z054

Read more less

Filter TypeFilter Insert Height mm70 Length mm292 Width mm177   Crosland Air Filter It's important to check the condition of your cars air filter at regular intervals; we recommend that your air filter is changed every time your car has an annual or 12,000 mile service. Your cars air filter prevents airborne debris such as dust, leaves and other abrasives finding their way in to the engine's cylinders where it can mix with the lubricating oil and form an abrasive compound. This will cause wear to the cylinders, pistons and bearings causing permanent damage. If your air filter is left neglected it will get dirty and blocked preventing your engine from sucking enough air into the combustion chamber, this will potentially cause your car to run rough and lose power due to the air/fuel ratio being too rich. We recommend that you check the filter size and shape of your air filter with the picture and dimensions available to ensure correct fitment.

Read more less

As now fitted to our very popular AIRTEC manifolds. The original brake servo pipe measures 12.5mm but most upgrade inlet manifolds are fitted with a 12mm push fitting, this make the pipe too tight and nearly impossible to remove, the metal 12.5mm push fitting upgrade fits perfectly and easy to install. A new brake servo pipe is £100+ and a our upgrade push fit is only £8.99. Fits most upgraded Inlet manifolds, thread is 3/8 BSP

Read more less

As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our direct replacement aluminium undertray for the E90, E92 and E93 M3 models. The front part of the original undertray on these cars is notoriously weak due to its fibre material construction and as a result is prone to failure over time. Our solution is a direct replacement, three-piece undertray made in aluminium that reuses all of the original mounting points to ensure a perfect and secure fitment. Unlike others on the market, the design of the oil cooler extraction ducting has also been carefully considered to imitate the original in order to maintain sufficient cooling. As a result, the sides of the ducts are enclosed against the oil cooler and the radius of the ducting increased in size. There are also brake duct cut outs to allow the use of a GT4-style splitter with brake cooling ducts. Finished in a high-quality black powder coat finish, the undertray offers improved strength, durability and cooling effectiveness. Features:•     Direct replacement for original E9x M3 undertray•     Made from high-quality aluminium for increased strength•     Uses all original mounting points – no cutting or drilling required•     Improved oil cooling extraction through enclosed ducting•     Allows for GT4-style splitter with brake cooling ducts•     Comes in a durable black powder coat finish•     Supplied with all fixtures and fittings•     Detailed installation instructions Registered Design Right number: Application Pending

Read more less

Developed at AIRTEC HQ in the UK, we’re proud to launch our billet PCV baffle plate aimed at 2.0 Duratec engine owners who wish to fit an external oil catch can or improve their engine’s PCV set up with a simple, bolt on modification for track or fast road use. This billet baffle plate replaces the car’s original Positive Crankcase Ventilation (PCV) plate and valve set up. Machined from billet aluminium, the plate allows the simple fitment of an external oil catch can via one, or both, of the M22x1.5 take-offs that have been machined into the plate. The kit also includes a one-way valve and adapter boss and the plate is finished in anodised black with an engraved AIRTEC Motorsport logo. Internally, the plate features extra baffles machined into the design in order to increase the surface area the engine crankcase vapour passes over, which decreases the amount of oil that is able to enter the intake. This helps to reduce carbon deposit build-up from passing back into the engine and forming an oily sludge on all parts of the intake system, which reduces air flow and therefore performance over time. Features: Allows an external oil catch can to be fitted Internal baffles helps reduce carbon build up Features one -way valve and adapter boss Replaces standard PCV set up Billet aluminium construction CNC precision machined Direct fitment and simple installation Anodised finish and engraved AIRTEC logo AIRTEC part number: ATMSFO102

Read more less

As part of our expanding Mini product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the R56 Cooper S model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the R56 Cooper model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. There is also the option to add a breather hose, which is required to fit the AIRTEC Motorsport intake pipe/induction kit.  The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the R56 Mini Cooper S  Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSMINI7

Read more less

  As part of our expanding Renault product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Megane RS Mk4 model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Megane RS Mk4 model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Renault Megane RS Mk4 Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSREN11

Read more less

As part of our expanding B58 platform product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the M140i and M240i models suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket finished in powder-coated matt black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. PLEASE NOTE: Does NOT fit standard air box – will fit with most aftermarket induction kits that use replacement shield configuration.  Features:  Kit developed specifically for M140i/M240i models Engineered for an easy, direct fit Internal baffle and dipstick Powder coated black finish Laser cut bracket Comprehensive fitting guide AIRTEC Part No: ATMSBMW7

Read more less

As part of our expanding VW product range, AIRTEC Motorsport is proud to launch our oil catch can kit for the Mk7 Golf R for fast road or track use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Golf R model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality, laser cut bracket finished in powder coated black, which allows the catch can to attach neatly in place and also locates the new washer fluid tank filler. The can itself features an internal micron filter, baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide.   Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can works as a filter to catch harmful contaminants before they can reach the inlet system.   Features:  Kit developed specifically for the Mk7 Golf R platform Helps to prevent build-up of oil residue in the intake system Maintains optimum engine performance Easy maintenance to check oil level and drain tank Simple direct fit Laser cut bracket Comprehensive fitting guide

Read more less

As part of our expanding Kia product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Stinger GT model suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Stinger GT model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Kia Stinger GT Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSKIA2

Read more less

As part of our expanding Audi product range, AIRTEC Motorsport is proud to launch our S1 oil catch can upgrade suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the S1 model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features:  Kit developed specifically for the S1 8X (Still unconfirmed on GB Models) Easy, direct fitment Internal baffle and dipstick Powder coated black finish Billet machined bracket Comprehensive fitting guide   AIRTEC part no: ATMSVAG15

Read more less

As part of our expanding Kia product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Ceed GT model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure performance of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Ceed GT model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality billet machined bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can works as a filter to catch harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Kia Ceed GT Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included CNC machined mounting bracket High quality powder-coated black finish 2x Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black

Read more less

As part of our expanding Peugeot product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the 308 GTi model, suitable for track or fast road use. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the 308 GTi model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick, and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Peugeot 308 GTi Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High quality powder-coated black finish Pro Hoses silicone hoses Step-by-step fitting guide All fixtures and fittings Only available in Pro-Series Black AIRTEC Part No: ATMSP&C2

Read more less

As part of our expanding Suzuki product range, AIRTEC Motorsport is proud to launch our oil catch can upgrade for the Swift Sport Boosterjet model. Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time. AIRTEC Motorsport’s solution to developing a catch can kit specifically for the Swift Sport model utilises the available space to integrate seamlessly within the engine bay. It features a high-quality laser cut bracket, finished in powder-coated satin black, which allows the catch can to attach neatly in place. The can itself features an internal baffle and dipstick and detaches to allow easy maintenance. It comes with a comprehensive fitting kit that includes all fixtures and fittings, as well as a detailed installation guide. Why do I need a catch can?The original oil breather set up can cause issues with carbon build-up inside the engine’s intake system over time. It forms an oily sludge that covers parts of the intake and inlet valves, which reduces air flow and therefore performance and efficiency. Once the build-up has formed, it’s a costly process to clean, so it makes sense to take preventative measures in order to avoid carbon build-up forming. A catch can also filters harmful contaminants before they can reach the inlet system. Features: Developed specifically for the Suzuki Swift Sport Helps reduce carbon build up on intake valves AIRTEC Motorsport baffled oil catch can Oil level dipstick included Laser cut mounting bracket High-quality powder-coated black finish Pro Hoses silicone hoses Includes all fixtures and fittings Features detailed fitting guide Registered Design Right number: Application Pending  AIRTEC part no: ATMSSUZ3  

Read more less

AIRTEC Motorsport complete breather kit for Focus MK2 ST & RS. Designed to help reduce the risk of split diaphrams on the 2.5 turbo engine that suffers with oil filter and breather issues, common on modified cars. Includes a full fitting kit with Pro Hoses and everything ready to fit! Features: AIRTEC Motorsport breather top plate AIRTEC Motorsport oil catch can New oil filter New O-ring seals Pro Hoses silicone hose kit All fittings and fixings ready to fit Complete fitting instructions

Read more less

TECHNICAL DATA AIRTEC Motorsport Fiesta MK8 ST 1.5 EcoBoost Engine Breather Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves One of the only kits designed with a dipstick allowing you to check the oil level inside the catch can so you know when to drain it Supplied with step by step instructions giving this an easy DIY install, taking less than 30 minutes to fit Features: Baffled oil catch can Oil level dipstick x2 Pro Hoses silicone hoses Step by step fitting guide Helps reduce carbon build up on intake valves WILL fit with AIRTEC induction shield in place. Only available in Pro-Series Black! Registered Design Right number: AIRTEC Part No: ATMSFO112

Read more less

AIRTEC Motorsport header tank with sight glass for the Renault Clio 200 EDC Available in Motorsport Silver or Pro-Series Black. Comes with standard blue header tank cap. Registered Design Right number: 6059103

Read more less

AIRTEC Motorsport lightweight alloy header tank for Fiesta MK7 – Complete with sight glass! No drilling required, uses original fixing points and is a direct replacement of the original Ford plastic header tank. Registered Design Right number: 6064605 AIRTEC part no: ATMSFO89

Read more less

AIRTEC Motorsport Header Tank for Fiesta MK8 ST-200 AIRTEC Motorsport lightweight alloy header tank for Fiesta MK8 ST-200 & mk2 puma st complete with sight glass. No cutting or drilling required, uses original fixing points and is a direct replacement of the original Ford header tank. Registered design right number: AIRTEC part no:

Read more less

As part of our expanding Ford Mustang product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit both the 2.3 EcoBoost and 5.0-litre V8 Mustang models. AIRTEC Part No: ATMSFO123 TECHNICAL DATA As part of our expanding Ford Mustang product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit both the 2.3 EcoBoost and 5.0-litre V8 Mustang models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from alloy and comes in a high quality powder coated black finish. It also  features a sight glass to view the coolant level and uses the original fixing points, hoses and cap. No drilling or cutting is required and fitting is a simple process with full instructions supplied. AIRTEC Part No: ATMSFO123

Read more less

AIRTEC Motorsport header tank for Meglio (Megane powered Clio) This complete kit offers an easy, simple header tank upgrade solution for a Renault Megane turbo converted Clio. Fits Clio 197 without factory air-con fitted (or air-con delete kit fitted). Designed and tested in-house at AIRTEC HQ, tested at many UK track days & at the Nürburgring. A must have for a Megane engine swapped Clio 197. The kit features Pro Hoses silicone connectors, an uprated cap and custom made header tank that is stronger than the original item and offers better heat mangement in a direct replacement solution. Designed to locate on the left hand side of the engine bay and will fit with either our own uprated AIRTEC alloy radiator, or a stock Megane radiator. Supplied complete with all fixtures and fittings for an easy and professional installation. Finished in a choice of Pro-Series Black or Natural Silver. Gloss Black, Race Red, Performance Blue normally kept in stock. Other colour hoses, made to order Frozen White, Bright Yellow, Grey, Kawasaki Green, Orange, Purple, Vivid Pink, Nitrous Blue, Ultimate Green, Nitrous Blue Please allow 2-4 weeks for delivery.

Read more less

As part of our expanding Mini product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit R53 Cooper S models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight alloy and comes in a natural silver or high quality powder coated black finish. It also  features a sight glass to view the coolant level and comes with an uprated high pressure cap. The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process. With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.  Please note: The Stant quick release high-pressure cap displayed in the images is for illustration purposes only, as Stant caps are no longer available. We now supply a replacement quick release high-pressure cap in a similar style. Features Direct replacement header tank for the R53 Cooper S Lightweight aluminium construction High quality black powder coat or natural silver finish Sight glass to view coolant level Uprated high pressure cap included No drilling or cutting required All fixtures included as well as fitting instructions Registered Design Right number: 6049901 AIRTEC part no: ATMSMINI2

Read more less

TECHNICAL DATA AIRTEC Motorsport header tank with sight glass for the Mini R56. Available in Motorsport Silver or Pro-Series Black. Comes with standard blue header tank cap.

Read more less