All

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit Ford focus MK3 RS & ST A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight aluminium and comes in a high-quality powder coated black finish. It also features a sight glass to view the coolant level and comes with a new cap. The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process. With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.  Features: Direct replacement header tank for the Ford Focus MK3 RS Lightweight aluminium construction High-quality black powder coat finish Sight glass to view coolant level Uprated high-pressure cap included No drilling or cutting required  

Read more less

Lower inlet air temperatures (IAT's) Massive increase of OEM part Extensively tested Easy install Prepreg 2x2 twill formed carbon fibre Lifetime warranty With the success of FMINLD1 for the Yaris GR we knew that there was a great opportunity to replicate the performance and aesthetic enhancement with the Corolla GR. The Forge Motorsport inlet duct fits the factory lower airbox and focuses on keeping your inlet temperatures down during spirited driving or while on the track/rally stage. By utilising 3D scans and SolidWorks CAD, our development team have been able to optimise the size of the inlet duct, creating an increase in uninterrupted cold air to be scooped into the stock airbox. 3D printed test parts were used alongside CAD simulation to ensure the optimum size and geometry. This inlet duct is much larger than stock, by replacing the entire shroud and effectively creating one large inlet duct to feed as much cold air into the OEM lower airbox. During testing on track days, the original duct caused inlet air temperatures to be heavily influenced by heat soak and fluctuated dramatically. Meanwhile the Forge Inlet Duct kept the inlet air temperatures not only reduced but at a more consistent temperature. A reduced consistent temperature is of great importance because any high temperature peaks will cause the ECU to retard the ignition and reduce the power you have available. The Forge inlet duct design incorporates a free-flowing path to both the upper and lower opening of the airbox, whereas the stock design has no flow management to the lower opening and the upper is small and not fully sealed. It is worth understanding that the lower opening is of far greater importance to the performance of your Yaris GR. There is a vacuum operated flap which is activated when under full throttle conditions, therefore the Forge Motorsport Inlet Duct ensures that your Yaris is getting colder directed air when the engine needs it the most. With the OEM design including open sections, baffles, and noise restrictors to disrupt the airflow, the Forge Inlet Duct is part of our acclaimed Hi Flow range and will ensure that your Corolla GR is receiving critical cold air. Not only is the Forge Inlet Duct a better option for performance, but the carbon fibre really helps to give the engine bay some character. The high-quality carbon fibre is prepreg 2x2 twill formed in an autoclave from billet tooling and finished with an anti UV gloss gel coat. The Forge Motorsport lifetime warranty on all hardware products shows the trust we have in the quality of our products while they are being enjoyed on your pride and joy.

Read more less

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit Mk6 ST150 models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight aluminium and comes in a high-quality powder coated black finish. It also features a sight glass to view the coolant level and comes with an uprated high-pressure cap. The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process. With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.  Features: Direct replacement header tank for the Mk6 Fiesta ST150 Lightweight aluminium construction High-quality black powder coat finish Sight glass to view coolant level Uprated high-pressure cap included No drilling or cutting required AIRTEC Part No: OLD PART NUMBER ATMSFO160  -NEW NUMBER ATMSFO171

Read more less

This is a performance enhancing air scoop for the MK8 Golf GTI EA888 EVO 4 engine. Features Can be be fitted in conjunction with the factory air intake system Perfect when installed alongside with our MST Performance Intake System More pronounced intake sound Features twin air tunnels instead of just one on the factory system What Does It Do? This performance air intake scoop delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated intake scoop Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2012-2021 Audi A3 (8V) 1.8 TFSI 2015-2021 Audi TT (FV) 1.8 TFSI 2013-2021 Seat Leon (MK3) 1.8 TSI 2013-2021 Skoda Octavia (MK3) 1.8 TSI 2015-2021 Skoda Superb (MK3) 1.8 TSI 2015-2021 VW Touran (MK2) 1.8 TSI 2015-2021 VW Passat (3G) 1.8 TSI 2016-2021 Audi S3 (8V) 2.0 TFSI 2018-2021 Audi SQ2 (GA) 2.0 TFSI 2018-2021 Audi Q3 (F3) 2.0 TFSI 2012-2021 Audi A3 (8V) 2.0 TFSI 2014-2021 Audi TT (FV) 2.0 TFSI 2014-2021 Audi TTS (FV) 2.0 TFSI 2018-2021 Seat Ateca Cupra (KH) 2.0 TSI 2014-2021 Seat Leon Cupra (MK3) 2.0 TSI 2019-2021 Skoda Karoq (NU7/ND7) 2.0 TSI 2015-2021 Skoda Superb (MK3) 2.0 TSI 2013-2021 Skoda Octavia RS (MK3) 2.0 TSI 2017-2021 VW Arteon (3H) 2.0 TSI 2016-2021 VW Tiguan (AD/BW) 2.0 TSI 2013-2021 VW Golf (MK7) 2.0 TSI 2015-2021 VW Passat (3G) 2.0 TSI 2017-2021 VW Tiguan Allspace (AD/BW) 2.0 TSI 2013-2021 VW Golf GTi (MK7) 2.0 TSI 2016-2021 VW Golf GTi Clubsport (MK7) 2.0 TSI 2019-2021 VW Golf GTi TCR (MK7) 2.0 TSI 2019-2021 VW T-Roc R (MK1) 2.0 TSI 2013-2021 VW Golf R (MK7) 2.0 TSI 2020-2025 VW Golf R (MK8) 2.0 TSI 2022-2025 Skoda Superb (MK3) 2.0 TSI 2020-2025 VW Tiguan R (AD/BW) 2.0 TSI

Read more less

This is a performance enhancing air scoop for the 2019+ Ford Focus MK4. Features Can be befitted in conjunction with the factory air intake system Perfect when installed alongside with our MST Performance Intake System Morepronounced intake sound Features twin air tunnels instead of just one on the factory system What Does It Do? This performance air intake scoop delivers increased air flow over the standard restrictive part. Whether this kit is being installed to a standard vehicle or to a already tuned vehicle, you can be sure of the positive performance gains this will deliver. What Will I Get? MST Performance utilise the top quality components in all of their kits see below for what this kit will include.. Black powdercoated intake scoop Full fitting kit with easy step by step instructions Fitment Compatibility Chart This product fits the following: Year Make Model Engine 2019-2025 Ford Focus (MK4) 2.0 ST Diesel 2019-2025 Ford Focus (MK4) 2.3 ST Petrol 2019-2025 Ford Focus (MK4) 1.0 EcoBoost Petrol 2019-2025 Ford Focus (MK4) 1.5 EcoBoost Petrol

Read more less

Wide Mouth / RamAir Snorkel – MK4 / MK4.5 Ford Focus | Injection-Moulded ABS Unlock true performance potential with our RamAir Snorkel Intake for the Ford Focus MK4 / MK4.5. Commonly known as the Wide Mouth, Snorkel, or Big Mouth intake, this high-flow duct is designed to feed colder, denser air straight from the grille directly into your airbox. Unlike many alternatives on the market, this snorkel is not 3D printed. It is injection-moulded from durable ABS plastic, ensuring consistent quality, fitment, and long-lasting performance. Key Features: Direct Fitment – bolts into place with ease (no fitting kit included) Injection-Moulded ABS – strong, heat-resistant, and precise Improved Cold Air Intake – channels air directly from the front grille into the intake system Available in Multiple Colours – match your engine bay styling Compatible with All MK4 / MK4.5 Focus Models – ST, ST-Line, Titanium & more This mod is perfect for improving airflow and adding an aggressive look to your engine bay — ideal for daily drivers and track builds alike.

Read more less

Focus Mk1 lightweight replacement polished alloy water header tankNo Drilling required, uses original fixing points and is a direct replacement for original Ford plastic header tank.Please note the Header tank comes with a non decorative cap, however for the perfect show look why not add a decorative cap. AIRTEC Part No: ATMSFO21

Read more less

Designed to fit with our AIRTEC Motorsport enclosed induction kit or the original air box, the replacement air feed fits in place of the original but offers improved flow by increasing the intake area. This allows it to draw in more fresh air and direct it towards the air filter, keeping a constant supply of cool air. AIRTEC Part No: ATMSFO142 TECHNICAL DATA As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch the intake air feed for the ST model, suitable for track or fast road use. Designed to fit with our AIRTEC Motorsport enclosed induction kit or the original air box, the replacement air feed fits in place of the original but offers improved flow by increasing the intake area. This allows it to draw in more fresh air and direct it towards the air filter, keeping a constant supply of cool air. Made from aluminium and finished in a high-quality black powder coated finish, the air feed also features a unique Pro Hoses silicone coupler to attach to the original air box inlet. The kit is a direct replacement that requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. The result is an improved flow of fresh air to the intake and a more pleasing look to the engine bay. Features: Comprehensive air feed designed specifically for the Mk4 Focus ST platform Directs constant feed of cold air to the filter Fits with AIRTEC Motorsport enclosed induction kit or original air box Long lasting, high quality black powder coat finish Includes all fixtures and fittings Will fit both facelift & pre-facelift models. AIRTEC Part No: ATMSFO142

Read more less

Fits Peugeot 308 GTI MK2 Proven to withstand temperatures up to 2500°F or 1370°C Prolongs the life of engine components Improves the appearance of the 308’s engine bay Stainless Steel Rivets and Fasteners Carbon fabric outer shell Calcium Magnesium Silicate Wool constructed Inner Core High temperature Silica fabric   The Forge Motorsport FMTUBL14 is a turbo blanket that has been specifically designed for the Peugeot 308 GTI MK2. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. The OE heat shield still allows a considerable amount of heat transfer thus creating a warmer engine compartment, which will have an effect on the engines components and increase intake temperatures. This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500°F of radiant heat which will assist in protecting and prolonging the life of engine components. Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power. As a bonus the FMTUBL14 improves the appearance of the 308’s engine bay considerably, The OEM turbo heat shield tarnishes over many heat cycles, a problem which does not affect Forge Motorsport turbo blankets. All Forge Motorsport turbo blankets are designed and manufactured to the highest standards and use superior materials, unlike some turbo blankets which are constructed using substandard materials.

Read more less

As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our double front air feed for the pre-facelift (2019 to 2022) ST model suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a simple but effective double air scoop to mount behind the grille and replace the original, which only channels air through one side of the grille opening. Our direct replacement part feeds cold air through both sides of the grille, improving the flow of fresh air to the intake. The laser-cut scoops are made from lightweight aluminium and finished in a high quality powder coated black finish. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be and includes all fixtures and fittings, including instructions for a bolt-on installation. Please note: This item will not fit in conjunction with the AIRTEC Motorsport Mk4 Focus ST oil cooler kit Fits pre-facelift (2019 to 2022) models only Features: Comprehensive kit designed specially for the Mk4 Focus ST platform Scoop directs constant feed of cold air to the intake Designed and developed in the UK No cutting or drilling required to fit Bespoke laser-cut and powder coated scoops Includes all fixtures and detailed instructions AIRTEC Part No: ATMSFO135

Read more less

As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the ST 2.3-litre model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified Mk4 ST owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the upper grille area without obstructing the air intakes. As a result, our design includes a designated scoop on the left-hand side that supports the oil cooler and channels cold air towards the intakes. The package also includes an AIRTEC Motorsport oil cooler, bespoke laser-cut and powder coated brackets, high quality braided hose lines with Aerotec fittings, a thermostat-controlled sandwich plate and all fixtures and fittings, including instructions for a bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk4 Focus ST models. Features: Comprehensive kit designed specially for the Mk4 Focus ST platform Reduces temperatures on track and road Scoop directs constant feed of cold air to the intake Designed and developed in the UK No cutting or drilling required to fit Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures and detailed instructions

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit Yaris GR models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight alloy and comes in a high quality powder coated black finish. It also features a sight glass to view the coolant level and comes with an uprated high pressure cap. The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process. With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.  Please note: The Stant quick release high-pressure cap displayed in the images is for illustration purposes only, as Stant caps are no longer available. We now supply a replacement quick release high-pressure cap in a similar style. Features Direct replacement header tank for the Yaris GR Lightweight aluminium construction High quality black powder coat finish  Sight glass to view coolant level Uprated high pressure cap included No drilling or cutting required All fixtures included as well as fitting instructions AIRTEC Part No: ATMSYGR10

Read more less

As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our additional cold air feed guide for the ST model. During the development of our AIRTEC Motorsport enclosed air box and oil cooler kits, we created an additional comprehensive solution to further improving the car’s cooling ability and reduce air intake temperatures on track or during fast road use. AIRTEC Part No: ATMSFO130 TECHNICAL DATA As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our additional cold air feed guide for the ST model. During the development of our AIRTEC Motorsport enclosed air box and oil cooler kits, we created an additional comprehensive solution to further improving the car’s cooling ability and reduce air intake temperatures on track or during fast road use. With vast experience in developing uprated cooling packages for a variety of modified track and road cars, the challenge with the Mk8 Fiesta ST was the very limited available space directly behind the open grille area. As a result, we developed an innovative air guide solution to help direct larger volumes of cold air towards the original top air intake feed. The size of the air guides are not only larger than standard but the guide also features a side air duct, utilising the space in the upper right-hand section of the grille area to feed cold air through trunking to either the Enclosed Induction Kit or our soon to be released AIRTEC Motorsport Oil Cooler Kit. Made from aluminium, the kit includes all fixtures and fittings, including instructions, for a simple bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk8 ST models. Please note: Fits with any aftermarket intercooler that retains OEM plastic upper surround. This will NOT fit with AIRTEC Motorsport Stage 3  – please see here: AIRTEC  Cold Air Feed for MK8 ST Stage 3 Intercooler Features: Comprehensive kit designed specially for the Mk8 Fiesta ST platform Reduces temperatures on track and road Larger air guides direct more flow towards the original intake Also directs a constant feed of cold air to the air box or oil cooler Reduces temperatures on track and road Designed and developed in the UK No cutting or drilling required to fit Bespoke laser-cut aluminium design High quality powder coated black finish Complete with all fittings and instructions AIRTEC Part No: ATMSFO130

Read more less

As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our additional cold air feed guide for the ST model. During the development of our AIRTEC Motorsport enclosed air box and oil cooler kits, we created an additional comprehensive solution to further improving the car’s cooling ability and reduce air intake temperatures on track or during fast road use. AIRTEC Part No: ATMSFO128 TECHNICAL DATA As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our additional cold air feed guide for the ST model. During the development of our AIRTEC Motorsport enclosed air box and oil cooler kits, we created an additional comprehensive solution to further improving the car’s cooling ability and reduce air intake temperatures on track or during fast road use. With vast experience in developing uprated cooling packages for a variety of modified track and road cars, the challenge with the Mk8 Fiesta ST was the very limited available space directly behind the open grille area. As a result, we developed an innovative air guide solution to help direct larger volumes of cold air towards the original top air intake feed. The size of the air guides are not only larger than standard but the guide also features a side air duct, utilising the space in the upper right-hand section of the grille area to feed cold air through trunking to either our  Enclosed Induction Kit or our soon to be released AIRTEC Motorsport Oil Cooler Kit. Made from aluminium, the kit includes all fixtures and fittings, including instructions, for a simple bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk8 ST models. Please note: Fits with any aftermarket intercooler that retains OEM plastic upper surround. This will NOT fit with Stage 3 AIRTEC Motorsport – please see here: AIRTEC  Cold Air Feed for MK8 ST Stage 3 Intercooler Features: Comprehensive kit designed specially for the Mk8 Fiesta ST platform Reduces temperatures on track and road Larger air guides direct more flow towards the original intake Also directs a constant feed of cold air to the air box or oil cooler Reduces temperatures on track and road Designed and developed in the UK No cutting or drilling required to fit Bespoke laser-cut aluminium design High quality powder coated black finish Complete with all fittings and instructions AIRTEC Part No: ATMSFO128

Read more less

As part of our expanding Ford Mustang product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit both the 2.3 EcoBoost and 5.0-litre V8 Mustang models. AIRTEC Part No: ATMSFO123 TECHNICAL DATA As part of our expanding Ford Mustang product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit both the 2.3 EcoBoost and 5.0-litre V8 Mustang models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from alloy and comes in a high quality powder coated black finish. It also  features a sight glass to view the coolant level and uses the original fixing points, hoses and cap. No drilling or cutting is required and fitting is a simple process with full instructions supplied. AIRTEC Part No: ATMSFO123

Read more less

Focus RS MK2 Group A Cold Air Feed which is designed to work with all Group A Open filters. Supplies a cold air feed directly into the Group A Filter Improving and maximising the airflow and performance. The cold air feed comes with Cold feed guide which sits just below the filter securing the trunking as well as a front grill-mounted plate which replaces the original plastic piece. Each kit comes with a 780mm piece of ducting, required plates and all required bolts and fixings. Please select options below of the kit you require. Option 1: Engine Bay Base Plate with Air Duct Option 2: Engine Bay Base Plate, Front Grill Plate & Air Duct   PLEASE NOTE: Silver finish is for illustrative purposes only.

Read more less

If you're looking for an easy, inexpensive way to enhance your underhood appearance or if your engine bay could use a touch of premium carbon fiber then we have you COVERED! Our ECS Tuning in-house designed and engineered Carbon Fiber Expansion Tank Cover Kit features precision 3D designed, gloss clear-coated carbon fiber overlays that simply lay over top of your OEM expansion tank and enhances the underhood appeal while covering up the ugly, grey plastic coolant tank. Our precisely modeled 2-piece overlays feature a smooth, appealing exterior design with provisions machined for clearance on OE features such as coolant hose connections and the coolant level sensor. Pre-applied high-temperature automotive-grade 3M foam tape ensures the parts stay in position while creating a great seal between the upper and lower covers.    PART DESIGN Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Made from lightweight, hand-laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured. Clear coated for excellent finish durability and UV resistance.  Hides the ugly, grey plastic expansion tank  Pre-applied foam tape creates a lasting connection to the expansion tank while creating a seal between the upper/lower covers. 3M foam tape is resistant to the continuous heat in the engine bay and is resistant to chemical degradation.  Lug features on the upper overlay covers the expansion tank vent and create a unique stylistic design  Incorporated sight-window allows visibility of coolant level with both covers installed  Expansion tank mounting bolts remain accessible, allowing removal of expansion tank while keeping the covers in place  Compatible with the following expansion tank caps: OEM, Audi R8, Porsche 991 and Gen3 "B"     PRODUCT DEVELOPMENT Our ECS Carbon Fiber Expansion Tank Cover Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Ensure your OEM expansion tank is clean and free of debris prior to installing self-adhesive foam strips. We recommend wiping the contact surfaces with isopropyl alcohol prior to installation. Reference our General Installation Guide for tips and suggestions.    NOTE: This part is for QTY 2 covers (upper and lower). All other items shown are for media reference only. This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Audi A3 8V FWD TDI Audi MK3 TT (2014+) Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Atlas 4Motion 2.0T Gen3 Volkswagen Atlas FWD 2.0T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Tiguan MQB 4Motion 2.0T Gen3 Volkswagen Tiguan MQB FWD 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details If you're looking for an easy, inexpensive way to enhance your underhood appearance or if your engine bay could use a touch of premium carbon fiber then we have you COVERED! Our ECS Tuning in-house designed and engineered Carbon Fiber Expansion Tank Cover Kit features precision 3D designed, gloss clear-coated carbon fiber overlays that simply lay over top of your OEM expansion tank and enhances the underhood appeal while covering up the ugly, opaque white plastic coolant ball. Our precisely modeled 2-piece overlays feature a smooth, appealing exterior design with provisions machined for clearance on OE features such as coolant hose connections and the coolant level sensor. Pre-applied high-temperature automotive-grade 3M foam tape ensures the parts stay in position while creating a great seal between the upper and lower covers.    PART DESIGN Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Made from lightweight, hand-laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured. Clear coated for excellent finish durability and UV resistance.  Hides the ugly, opaque, white plastic expansion tank  Pre-applied foam tape creates a lasting connection to the expansion tank while creating a seal between the upper/lower covers. 3M foam tape is resistant to the continuous heat in the engine bay and is resistant to chemical degradation.  Lug feature on upper overlay covers the expansion tank vent  Incorporated sight-window allows visibility of coolant level with both covers installed  Expansion tank mounting bolts remain accessible, allowing removal of expansion tank while keeping the covers in place  Compatible with all windshield washer reservoir mounting locations on various models  Compatible with the following expansion tank caps: OEM, Audi R8, Porsche 991 and Gen3 "B"    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Expansion Tank Cover Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Ensure your OEM expansion tank is clean and free of debris prior to installing self-adhesive foam strips. We recommend wiping the contact surfaces with isopropyl alcohol prior to installation. Reference our General Installation Guide for tips and suggestions.    NOTE: This part is for QTY 2 covers (upper and lower). All other items shown are for media reference only. This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8U Q3 FWD 2.0T Audi 8U Q3 Quattro 2.0T Audi A3 8P FWD 2.0T Audi A3 8P FWD TDI Audi A3 8P Quattro 2.0T Audi A3 8P Quattro 3.2L Audi A3 8P Quattro V6 3.2L Audi TT MKII FWD 2.0T Audi TT MKII Quattro 2.0T Audi TT MKII Quattro 3.2L Audi TT MKII TTS 2.0T Audi TTS MK2 (2006-2013) 2.0T Volkswagen Beetle All 1.8T Gen3 Volkswagen Beetle All 2.0T Volkswagen Beetle All 2.0T Gen3 Volkswagen Beetle All 2.5L Volkswagen Beetle All TDI Volkswagen CC 4Motion VR6 Volkswagen CC FWD 2.0T Volkswagen CC FWD VR6 Volkswagen EOS All 2.0T Volkswagen EOS All 3.2L Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sedan 1.4T Hybrid Volkswagen Jetta VI Sedan 1.8T Gen3 Volkswagen Jetta VI Sedan 2.0 Volkswagen Jetta VI Sedan 2.0T Gen3 GLI Volkswagen Jetta VI Sedan 2.5 Volkswagen Jetta VI Sedan GLI Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift 1.4T Volkswagen Jetta VI Sedan Facelift 1.4T Hybrid Volkswagen Jetta VI Sedan Facelift 1.8T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0L Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen Passat B7 FWD 1.8T Gen3 Volkswagen Passat B7 FWD 2.0T Gen3 Volkswagen R32 MKV All 3.2 Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

The Forge Motorsport FMTUB11 has been designed for the Alfa Romeo MiTo QV. This turbo blanket is designed to isolate the radiant heat produced by the turbocharger. This design has been created to withstand the harshest of environments and proven to withstand temperatures up to 2500°F (1370°C) of radiant heat which will assist in protecting and prolonging the life of engine components.   Design innovation keeps the heat of the exhaust gases contained within the hot side of the turbocharger, away from the cool side and the intake path which helps reduce turbo lag and air intake temperatures resulting in more power.  

Read more less

TAKE THE PRESSURE. BEAUTIFUL BILLET REPLACEMENT EXPANSION CAP. Doesn't your pride and joy deserve better than cheap plastic parts in the engine bay?  WHY CHANGE? The RacingLine Coolant Expansion Tank Cap will keep your coolant expansion tank at its perfect pressure to be sure that your high-performance engine’s coolant system is performing exactly as it should.  The cap's a critical part of your car's cooling system to ensure that correct pressure is maintained, and never exceeded. Older, worn stock coolant caps loose the ability to hold correct pressure to keep the coolant at maximum efficiency. This is an engineered, billet replacement coolant cap to replace the cheap plastic one, with sophisticated internal springing and bleed off.  Don’t confuse this RacingLine full replacement cap with other cheap covers - which simply stick on over the plastic cap. We think your car deserves better than that. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC 5-axis technology. Each cap starts life as a solid billet of aerospace-quality 6061 aluminium. Sophisticated internal Japanese-made springing and bleed off mechanism. Polished, then gloss-anodised in stunning Midnight Black to stay beautiful for year after year. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 5 GTI 1.4 TSI 6R 2008-2015 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > VW ID.Buzz 2023+ > VW ID.4 2020+ > VW Amarok 2010-2020 > VW ID.3 2019+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Audi Q5 3.0 TDI II FY 2017+ > Audi Q4 E-tron 20210+ > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Arona 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Cupra Born 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Enyaq 2021+

Read more less

An alloy header tank for the R58 Model Cooper S. This simply replaces old stock header tank, and reuses the stock water cap from your old header tank.   fits: MiniSecond generation (R55/R56/R57/R58/R59) (2006–2015)R58 CoupeLCI 2012-2015R59 RoadsterCooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18) Hand crafted and polished in the UK making for an easy fitment and replacement. If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is polished alloy header tank for the 2011 onwards Cooper S Diesel (2 Litre). It is a direct replacement, utilising the original mountings and tank pressure cap. Hand crafted and polished in the UK making for an easy fitment and replacement. fits: MiniSecond generation (R55/R56/R57/R58/R59) (2006–2015)R55 ClubmanLCI 2010-2014R56 HatchbackLCI 2010-2014R57 ConvertibleLCI 2010-2014R58 CoupeCooper SD 2.0 Turbo Diesel (N47)R59 RoadsterCooper SD 2.0 Turbo Diesel (N47) If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A set of 8 silicone coolant hoses for the BMW Mini / Clubman/ Countryman Cooper S ( 2007 on N14 engine ) fits: MiniCountryman 2010 - 2016Cooper S 1.6 Turbo Petrol (N18)Second generation (R55/R56/R57/R58/R59) (2006–2015)R55 ClubmanPre LCI 2007-2009 N14/N18 R56 HatchbackPre LCI 2007-2009 N14R57 ConvertibleLCI 2010-2014 The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty* *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less