All

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Rear Diffuser. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of the Facelift B8 A4 & S4. The diffuser is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.   To compliment the look of your new diffuser, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B8 A4 & S4. The spoiler is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  *For B8 chassis vehicles with an integrated trunk spoiler. Fits all B8/B8.5 S4. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. Cross Reference Spoiler This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B9 A4. An exclusive design only available through ECS Tuning, your new trunk spoiler will be sure to catch attention and turn heads. The spoiler is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid*.  To compliment the look of your new trunk spoiler, check out the ECS Carbon Fiber Grille Accent Set, Side Blades, Diffuser, and Front Lip, only available from ECS Tuning. *Installation on the B9 S4 requires removal of the factory trunk spoiler. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. Cross Reference rear spoiler, carbon spoiler, rear lip, carbon lip, lip spoiler, carbon fiber lip spoiler, rear wing, wing This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Designed to fit OEM 2 Door GTI body components only. Aftermarket body parts may require modification. If your fenders are looking like sizzling strips of bacon, or if you need extra clearance for those wide wheels, ECS Tuning has got you covered.  Designed to offer full coverage of your wheel and tire setup, these won't look like an afterthought. The ECS front and rear fender flares add up to an additional 75mm of wheel & tire clearance for that extra wide fitment. Specifically engineered for 2 door MKV GTI's - The ECS carbon flares follow every curve and crevice of your MKV GTI's body lines from fender-to-quarter panel for a complete, uninterrupted, smooth appearance. Our ECS Carbon Fiber Fender Flares are made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. The end result is a structural rigid fender flare that is flexible and lightweight that not only creates a functional body addition to increase track width and wider tire contact patch, but also completes a styling transformation like no other!  We've made installing our flares as efficient as possible; by including step-by-step documentation and specialty tools, the included documentation and equipment will assist in a much smoother and streamlined process. Please read our installation PDF prior to purchasing. **Cutting and welding of the vehicle's body is required for installation.** -- Although designed to specifically fit MKV GTI 2 Door body components, some minor/major modifications to either the carbon fiber fender flares and/or further modifications to the vehicle's body will be required to fit the MKV R32 and other MKV models not using OEM MKV GTI side skirts and front and rear valances, which will be required for correct fitment. --

Read more less

Product Details Raise the level of style on your MKVI with our real carbon fiber front lip diffuser. This quality piece screws right into your factory front valance and gives the car a much lower visual appearance. For ease of installation, we have provided a step by step PDF installation guide. Our ECS Carbon Fiber Front Diffuser is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. * 4 of ES2918127 is suggested for proper installation.*  

Read more less

Product Details Raise the level of style on your MK6 with our real carbon fiber front lip. This quality piece screws into the same locations as your factory front lip spoiler (if equipped) and gives the car a much lower visual appearance. Installation is short and simple as it reuses existing factory hardware. Our ECS Carbon Fiber Front Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. For vehicles without front lip spoiler, you will also need the following: QTY 5 - ES6571 - Speed Nuts QTY 9 - ES471384 - Self Tapping Screws This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VI All 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Want to make your hatch pop open like magic? This kit includes everything you need to make your hatch open with the touch of a button on your key fob. Simply replace your stock struts, flip your hatch strut mounts 180°, install the included strut mounting ball studs, and that's it! This is a simple accessory that will leave you wondering how you ever lived without it! No coding or any programming required! Kit includes: Specially Valved ECS Tuning Hatch Struts Hatch Strut Ball Studs Hatch Strut Ball Stud Washers *Note: Bump stops in installation video are no longer included in kit. These are no longer required with the ECS Tuning Hatch Struts.* *As to be expected the hatch will be more difficult to close than with the factory hatch struts. However, with a slight increase in force over the factory hatch struts, you will be used to this slight change in no time. This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf R All 2.0T Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Want to make your hatch pop open like magic? This kit includes everything you need to make your hatch open with the touch of a button on your key fob.  Simply replace your hatch struts, strut mounting ball pins and hatch stop bumpers with the included components, then make an adjustment in your vehicle's coding via VCDS Diagnostic Software, or similar, and enjoy remotely opening the hatch at the touch of a button.  This is a simple accessory that will leave you wondering how you ever lived without it! Kit includes: Specially Valved ECS Tuning Hatch Struts Spring Loaded Hatch Stop Bumpers Hatch Strut Ball Studs Hatch Strut Ball Stud Washers *This kit requires coding to operate properly.* *As to be expected the hatch will be more difficult to close than with the factory hatch struts. However, with a slight increase in force over the factory hatch struts, you will be used to this slight change in no time. This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen R32 MKV All 3.2

Read more less

Product Details Protection of your undercarriage and oil pan is vital. Between giant potholes, speed bumps and bumpy terrain your vehicle is exposed to a variety of impacts that can ruin your oil pan or other critical components. Protect your vitals with our ECS Tuning in-house design and engineered Street Shield Aluminum Skid Plate Kit. Constructed from 3/16" (4.76mm) thick 5052 aluminum, weighing in at only 16.7 lbs, with factory modeled air ventilation, our skid plate is sure to stand up to harsh road conditions that your OEM plastic belly pan could not. Additionally, the ECS skid plate encompasses the full length of the engine undercarriage from the front bumper cover to the front engine subframe to provide complete protection. Conveniently ECS includes black zinc-coated steel T25 & T30 hardware for easy installation and superior corrosion resistance.    Cross Reference   This Part Fits the Following Vehicles Make Model Submodel Engine Audi A3 8P FWD 2.0T Audi A3 8P Quattro 2.0T Audi A3 8P Quattro V6 3.2L Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen R32 MKV All 3.2 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details With the introduction of the MQB EA888 Gen3 1.8T/2.0T engine came multiple advancements in technology and production. Significant weight savings were accomplished through molded plastic parts throughout the powertrain; unfortunately, this included the engine's oil pan. With no protection to cover such an important, yet fragile part, it's easy to see why a plastic oil pan needs protection! For the daily driver at stock height or the enthusiast with an aggressive suspension drop, our ECS Aluminum Street Shield adds peace of mind and protection against potholes, road debris and other predators looking to put a hole in your pan. Protect your vitals with our ECS Tuning in-house engineered Aluminum Street Shield Skid Plate Kit. Constructed from 3/16" (4.76mm) thick 5052 aluminum and weighing in at only 16.15 lbs, with factory modeled air ventilation, our skid plate is sure to stand up to harsh road conditions that your OEM plastic belly pan could not. Additionally, the ECS skid plate encompasses the full length of the engine undercarriage from the front bumper cover to the front engine subframe to provide complete protection. Conveniently this kit includes zinc-coated steel subframe hardware, aluminum skid plate spacers and all factory mounting hardware for easy installation and corrosion resistance.  Engineered and manufactured in the USA, you can expect nothing but the best performance and longevity with our superior Aluminum Street Shield Skid Plate Kit from ECS Tuning!   This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.4 e-tron Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V FWD TDI Audi A3 8V Quattro 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade the exterior styling on your VW MK7.5 GTI with our ECS Tuning In-House designed and engineered Carbon Fiber Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Carbon Fiber Diffuser!    PART DESIGN Made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured then clear coated for UV resistance. Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.   KIT CONTENTS Carbon Fiber Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7.5 GTI Carbon Fiber Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

Read more less

Raise the level of style on your Volkswagen MK7.5 GTI with the ECS Tuning Carbon Fiber Fog Light Trim and Front Bumper Grille Flare Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required.  These were designed to provide your VW with a more aggressive look by accentuating the area around the fog grilles, providing bold, aggressive styling.  An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Bumper Flares and Foglight Trim Overlays are made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Carbon Fiber Bumper Flares amplify the shape of the OEM fog light surround trim for aggressive styling  Carbon Fiber Fog Light Trim Overlays add a touch of premium carbon fiber to the factory fog light trim Both parts apply directly to the front-end using the pre-applied heavy duty 3M adhesive tape to accentuate the area around the fog lights and fog light trim Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Research and Development Team.   KIT CONTENTS This is for QTY 1 set of front Bumper Grille Flares (1 left and 1 right) and QTY 1 set of front Foglight Trim Overlays (Left and Right side, upper and lower- 4 pieces). **All other products are shown for reference and are available separately. Please reference green-highlighted image showing the parts that are included.**     PRODUCT DEVELOPMENT Our ECS Carbon Fiber Bumper Flares and Foglight Trim Overlays were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing. Showcased on our ECS Tuning 2019 SEMA RallyWagen "2.0" South America VW GTI    INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the parts directly to the front bumper trim using the pre-applied adhesive tape. 

Read more less