All

Raise the level of style on your B9 S4 with the ECS Tuning Carbon Fiber Grille Overlay Set. This quality addition was engineered and designed in-house to fit directly to your factory grille, with no modifications required. These overlays cover up the existing chrome and add a more aggressive profile and design.  The overlays were designed to provide the vehicle with a more aggressive look by accentuating the trim area inside the grilles. An exclusive design only available through ECS Tuning, this grille overlay set will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Grille Overlay Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper side grille trim using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing a similar look to the "RS model" front bumpers. Features from the bumper, grille, and inlet grille are integrated into our design  Enhances the already existing grille flares for more aggressive “RS” styling Grille overlays extend across the inside of the inlet grille to cover any exposed chrome   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Grille Overlay Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Overlays directly to the grille trim using the pre-applied adhesive tape. 4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Give the front of your vehicle a classy touch of carbon fiber with this Carbon Fiber Front Grille Frame Overlay from ECS Tuning. Easily installs over top of your existing grille for a simple carbon fiber addition and in no time at all, your vehicle will look different from all the others. An easy, quick way to give your car a completely different personality. Made from lightweight, hand laid carbon fiber material with pre-impregnated carbon fiber cloth, epoxy resin and then finished in a durable gloss clear coat for UV and heat protection. Includes heavy duty 3M tape for easy, non-permanent installation.    Check out all of ECS Tuning's other available body modifications to give your Volkswagen a custom look.   **Due to product being hand trimmed, some minor deviations in fitment to the grille may expose underneath surface. For models with chrome grilles, black trim tape can be used on grille before applying overlay for the desired appearance.** * 2 of ES2918127 is suggested for proper installation.* This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf V All 2.0T Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your Pre-facelift B8 A4 S-Line/S4 with the ECS Tuning carbon fiber front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Carbon Fiber Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. To compliment the look of your new front lip, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. *Note* For additional installation security, ECS Tuning recommends adding self tapping screws the ensure the front lip is secured properly at high speeds. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your Facelift B8 A4 S-Line or S4 with the ECS Tuning Carbon Fiber Front Lip Spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Carbon Fiber Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. To compliment the look of your new front lip, check out the ECS Carbon Fiber Trunk Spoiler, Side Blades, and Diffuser, only available from ECS Tuning. *Note* For additional installation security, ECS Tuning recommends adding self tapping screws the ensure the front lip is secured properly at high speeds. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B9 A4/S4 with the ECS Tuning carbon fiber front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Carbon Fiber Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. To compliment the look of your new front lip, check out the ECS Carbon Fiber Trunk Spoiler, Side Blades, Diffuser, and Grille Accents, only available from ECS Tuning. *Note* For additional installation security, ECS Tuning recommends adding self tapping screws the ensure the front lip is secured properly at high speeds. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. *Front Lip Spoiler was test fit on North American bumper models - Due to variances in front bumpers on ROW models, we cannot confirm fitment on models outside North America* Cross Reference valance This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The ECS Carbon Fiber Fuse Box / ECU Cover adds unique, authentic carbon fiber styling to the underhood of your MQB platform vehicle without any permanent modifications. Easily installs with our  conveniently pre-applied 3M tape to the underside of the cover. It's unique styling not only covers the black plastic fuse box lid, but it also has a wing that extends over the unsightly ECU clamshell bracket to further enhance engine bay styling.   PART DESIGN Our in-house engineering team was tasked with making our cover fit perfectly atop the fuse box lid and to also cover the ugly ECU clamshell bracket. It's design perfectly works with both standard AND lock-box cover ECU's.  It also retains the quick disengagement feature of locking clips for easy removal and installation to service the fuses underneath.  The included plastic-purpose 3M tape is properly selected for the harsh goings within the engine-bay environment and easily sticks on to the fuse box lid with relative ease once cleaned and dried.  The ECS Carbon Fiber Fuse Box / ECU Cover is made from lightweight, hand laid carbon fiber material with pre-impregnated carbon fiber cloth, epoxy resin and then finished in a durable gloss clear coat for UV and heat protection for continuous operating temperatures of up to 300° F.   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Fuse Box / ECU Cover was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. Our engineering team went through multiple prototypes between both physical part and tape selection and tape locations to ensure the best product was delivered to you.    INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish! See our Installation PDF under the INSTALLATION Tab for more information. *2 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation.* Previous Revisions 019725ECS01 013913LA03 This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Audi MK3 TT (2014+) Quattro 2.0T Audi RS3 8V (2018+) 2.5T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Atlas 4Motion 2.0T Gen3 Volkswagen Atlas 4Motion 3.6L V6 Volkswagen Atlas FWD 2.0T Gen3 Volkswagen Atlas FWD 3.6L V6 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

If you're looking for an easy, inexpensive way to enhance your underhood appearance or if your engine bay could use a touch of premium carbon fiber then we have you COVERED! Our ECS Tuning in-house designed and engineered Carbon Fiber Fuse Box Cover features a precision 3D designed gloss clear-coated carbon fiber overlay that simply lays over top your OEM fuse box lid and enhances the underhood appeal. Our precisely modeled overlay features sleek lines and edges for that ultra-smooth look. Our design eliminates the awkward edge found on the outer, front edge of the OEM fuse box lid and creates a smooth, attractive flat surface. Trapped dirt on the upper surface is now a thing of the past with our cover, keeping your engine bay tidier and easier to clean.  In addition to our design elements, there is no concern of water or other environmental impacts on your critical electrical components as our fuse box overlay simply works in harmony with the OEM fuse box lid to simply add to the cosmetic appeal with beautiful gloss carbon fiber material. Furthermore, the factory release latches remain fully functional allowing for uninterrupted serviceability of the fuse box cover if access is ever needed.  The carbon fiber overlay is made from 2x2 twill weave that is gloss clear coated for UV and heat protection and to seal against environmental impact for prolonged durability. The included foam tape makes installation a breeze. Simply peel and stick the foam pads to your OEM fuse box cover to the areas shown in our installed photos and then stick on our carbon fiber overlay. No need to worry about the tape's integrity as it's rated for up to 200° F.  and made from strong adhesive backing with polyurethane foam material.  Easy to install, easy to style, get your ECS Carbon Fiber Fuse Box Overlay Kit today!   Be sure to check out our other ECS Tuning Carbon Fiber Underhood Products for your vehicle: 1. Carbon Fiber Engine Cover - 2.0T TSI - ES2804425 2. Carbon Fiber Intake Systems (MK6 GTI / Jetta GLII) ES2979256 (Carbon Tube/Carbon Box) ES2966359 (Carbon Tube/Aluminum Heat Shield) ES2863350 (Wrinkle Black Aluminum Tube/Carbon Box) ES2863351 (Polished Aluminum Tube/Carbon Box) 3. Carbon Fiber Oil Filter Cover - 2.0T TSI - ES3200158 4. Carbon Fiber Battery Cover Kit - ES3187910   **Installation Note: Ensure your OEM fuse box lid is clean and free of debris prior to installing self-adhesive foam strips. Reference our installation photos for foam strip installation locations.  This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8J TTRS Quattro 2.5T Audi A3 8P FWD 2.0T Audi A3 8P Quattro 2.0T Audi TT MKII FWD 2.0T Audi TT MKII Quattro 2.0T Audi TT MKII TTS 2.0T Audi TT MKII Quattro 3.2L Audi TTS MK2 (2006-2013) 2.0T Audi TTS MK3 (2014+) 2.0T Volkswagen CC 4Motion VR6 Volkswagen CC FWD 2.0T Volkswagen CC FWD VR6 Volkswagen EOS All 2.0T Volkswagen EOS All 3.2L Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen R32 MKV All 3.2 Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B8 S4 with the ECS Tuning Carbon Fiber Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a similar look to the RS model front bumper covers. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. The ECS Tuning Carbon Fiber Grille Accent Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. 3M dual sided tape has been pre-applied to each piece, ready for installation right out of the box.  Note:  Due to slight variations in bumpers, we include extra 3M tape to use as needed.  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. To compliment the look of your new grille accents, check out the ECS Carbon Fiber Trunk Spoiler, Side Blades, Diffuser, and Front Lip, only available from ECS Tuning.   Previous Revisions 018360ECS01 Cross Reference grill This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B9 S4 or A4 S-line with the ECS Tuning Carbon Fiber Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required.  The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the inlet grilles, providing a similar look to the "RS model"front bumper covers. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Grille Accent Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing a similar look to the "RS model" front bumpers. Features from the bumper, grille, and inlet grille integrated into our design  Enhances the already existing grille flares for more aggressive “RS” styling Grille Flares extend around the inside of the inlet grille to cover any exposed paint   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. Cross Reference grill This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The ECS Carbon Fiber Core Support Braces replace the weak stamped steel lock carrier support braces, found over top the headlights, for increased durability and underhood appeal.  Made from ultra-lightweight, hand laid carbon fiber material, our braces will outperform and outshine the OEM set. Simple to install, these make for a great stand-alone addition or complementary to other underhood carbon fiber products for outstanding beauty!   PART DESIGN Made from lightweight, hand laid carbon fiber material with pre-impregnated carbon fiber cloth, epoxy resin and then finished in a durable gloss clear coat for UV and heat protection for continuous operating temperatures of up to 300° F. Retains all of the critical features to mount to the core support and fender. Utilizes zinc-plated rivet nuts for mounting the headlights while providing good corrosion resistance to the elements. Retains hood latch tab feature that allows left hand drive, or right hand drive customers to mount their hood latch cable just like the OE component.   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Core Support Brace Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts ! See our Installation PDF under the INSTALLATION Tab for more information. 100% reversible, these reuse all OEM mounting hardware.  Looking for shiny new bolts? See ES471667 - QTY 5 required per each side Cross Reference Lock Carrier support This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf R All 2.0T Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your driving experience and interior appearance all at once with ECS Tuning!  Our in-house designed and engineered Paddle Shifters provide you with a much larger contact area for activation of the upshift and downshift paddles, meaning you're no longer confined to holding the steering wheel at a precise location when utilizing your paddle shifters   PART DESIGN Designed in-house using 3D laser scanning and CAD technology for precision fitment Inspired by OEM interior surfaces and contours for seamless integration into the interior Features -/+ symbol decals adhered under the clear coat, to resemble the OEM shift paddle Two-piece construction comes pre-assembled for ease-of installation Replaces factory plastic paddle, making for a crisp and concise feel Recessed finger grip area along entire back edge of paddle for enhanced grip ECS carbon fiber products are made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured Clear coated for excellent finish durability and UV resistance   PERFORMANCE FEATURES Paddle shifter extends along circumference of steering wheel and provides additional area for up/down shifting for greater working range while cornering  Maintains positive driving position by limiting “reach” to upshift/downshift   PRODUCT DEVELOPMENT Our ECS Paddle Shifters were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts in detail! See our Installation PDF under the INSTALLATION Tab for more information. Cross Reference flappy paddle, shift paddle, DSG, Tiptronic This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VII GLI 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Rear Diffuser. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of the Pre-Facelift B8 A4 & S4. The diffuser is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.   To compliment the look of your new diffuser, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less