All

Fully serviceable and tuneable replacement turbocharger actuator  fits: VauxhallAdam2014 Onwards (1.0T)CorsaE (2015 Onwards)(1.0T 2015 Onwards) Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please note this will only fit the 1.0L models with the detachable turbuckle as shown in the image above. If your turnbuckle does not thread on to the OEM actuator then this Forge actuator will not suit your application. Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACVC1 Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This kit includes everything that you will require to install the atmospheric dump/blow off valve to your 600cc petrol Fortwo's, all 700cc petrol Fortwo's, all Roadsters, and the Crossblade up to the early 2007 model year. Also included in this kit is a replacement silicone boost hose. These will not fit the Forfour, the 800cc diesel Fortwo or the new 999cc Fortwo, , including the 999cc Fortwo Brabus. The valve has been specially designed for this vehicle and uses twin springs and dual pistons to prevent the valve from leaking air into the intake system at idle with a 12mm inlet to ensure a faster air velocity so that it sounds fantastic. Please choose the hose colour using the options above.   In The Box:1 x FMSCDVK Valve1 x 5mm T Piece1 x 500mm of 4mm Vacuum Tube3 x Cable Ties1 x 35mm Hose Clamp2 x 55mm Hose Clamp1 x Silicon Boost Hose, with Valve Take Off1 x Instructions1 x Forge Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below. If you are unsure if this product is suitable for your application, please contact us.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Blow Off valve is for the Peugeot / BMW Mini 1.6 Turbo engines, as found in the Peugeot 207/307/308 GT Turbo and BMW Mini Cooper S Turbo fitted with the N14 engines, fits: MiniSecond generation (R55/R56/R57/R58/R59) (2006–2015)R55 ClubmanPre LCI 2007-2009 N14/N18 R56 HatchbackPre LCI 2007-2009 N14R57 ConvertibleLCI 2010-2014Peugeot207This valve is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. The most common complaint on the OEM solenoid valve is a split diaphragm preventing the valve from opening fully, or not at all. This doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure. We have seen many valves with this problem .The other problem is that diaphragm retaining ring is made from very thin plastic that goes brittle with heat cycles, and eventually fails. This prevents the diaphragm from sealing with the same problems as mentioned above. This particular failure also results in the valve falling apart upon removal from the turbo, though in extreme cases bits of plastic can enter the turbo and destroy it. (see image above). Our alternative is a fully engineered solution offering both significantly improved reliability .Our valve is piston based , with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. The valve has been proved on the VAG scene for many years. The spring is interchangeable for different levels of boost, and the solenoid is plug and play with the wiring harness which is included.   Product Code Fitment FM207V Recirc Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012 FMDVR60R Recirc Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards FMDVMCS Blow Off Adaptor Plate For 2007/8 Cooper S Turbo only FMDVR56A Blow Off Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012 FMDVR60A Blow Off Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards     In The Box:1 x FMDVR56A Valve1 x Mini Wiring Harness1 x Solenoid, Bracket, and Screws1 x Mini Vacuum Tap1 x Uprated Blue Spring10 x Cable Ties1 x 2000mm of 4mm Vacuum Tube3 x M6 x 35 Socket Cap Bolts1 x M5 x 35 Self Tapper Screw1 x Instructions1 x Forge Keyring and Sticker   This product is available in machined alloy finish only   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Designed specifically for the BMW/Peugeot N18 engines, (Cooper S 2011 onwards, JCW Cooper S 2013 onwards, R58 Coupe 2012 onwards, Peugeot 208 GTi late 2012 onwards includes the Sport model, RCZ THP 156 & 200 2011 onwards). This product is either recommended where the boost pressure has been increased by an ECU software upgrade or simply as a solution to the many failures that have occurred. The most common complaint on the OEM solenoid valve is a split diaphragm preventing the valve from opening fully, or not at all. This doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure. We have seen many valves with this problem (see image above). FITS: MiniCountryman 2010 - 2016Cooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18)Paceman 2012 - 2016Cooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18)Second generation (R55/R56/R57/R58/R59) (2006–2015)R55 ClubmanPre LCI 2007-2009 N14/N18 R56 HatchbackLCI 2010-2014R57 ConvertibleLCI 2010-2014R58 CoupeLCI 2012-2015R59 RoadsterCooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18)Peugeot208GTIGTI 2016 OnwardsRCZ THP156200 The other problem is that diaphragm retaining ring is made from very thin plastic that goes brittle with heat cycles, and eventually fails. This prevents the diaphragm from sealing with the same problems as mentioned above. This particular failure also results in the valve falling apart upon removal from the turbo, though in extreme cases bits of plastic can enter the turbo and destroy it. Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve is piston based , with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. The valve has been proved on the VAG scene for many years. The spring is interchangeable for different levels of boost, and the solenoid is plug and play with the wiring harness which is included.   In The Box:1 x FMDVR60R Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x Aluminium Spacer1 x M6 x 30 Hex Head Bolt1 x M6 Penny Washer1 x M6 Nyloc Nut1 x Uprated Red Spring10 x Cable Ties1 x 5mm T Piece1 x 2000mm Length of 4mm Vac Hose1 x Forge Keyring and Sticker   In order that you purchase the correct valve for your vehicle please refer to the fitment table below before ordering.   Product Code Fitment FM207V Recirc Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012 FMDVR60R Recirc Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards FMDVMCS Blow Off Adaptor Plate For 2007/8 Cooper S Turbo only FMDVR56A Blow Off Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012 FMDVR60A Blow Off Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards    Patent applied for This product is available in machined alloy finish only   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Designed specifically for the BMW/Peugeot N18 engines, (Cooper S 2011 onwards, JCW Cooper S 2013 onwards, R58 Coupe 2012 onwards, Peugeot 208 GTi late 2012 onwards, Peugeot 308 GTI, RCZ THP 156 & 200 2011 on). This product is either recommended where the boost pressure has been increased by an ECU software upgrade, for those wanting a loud blow off sound, or simply as a solution to the many failures that have occurred. The most common complaint on the OEM solenoid valve is a split diaphragm preventing the valve from opening fully, or not at all. This doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure. We have seen many valves with this problem (see image above). FITS: MiniCountryman 2010 - 2016Cooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18)Paceman 2012 - 2016Cooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18)Second generation (R55/R56/R57/R58/R59) (2006–2015)R55 ClubmanPre LCI 2007-2009 N14/N18 R56 HatchbackLCI 2010-2014R57 ConvertibleLCI 2010-2014R58 CoupeLCI 2012-2015R59 RoadsterCooper S 1.6 Turbo Petrol (N18)JCW 1.6 Turbo Petrol (N18)Peugeot208GTIGTI 2016 OnwardsRCZ THP156200 The other problem is that diaphragm retaining ring is made from very thin plastic that goes brittle with heat cycles and oil contamination, and eventually fails. This prevents the diaphragm from sealing with the same problems as mentioned above. This particular failure also results in the valve falling apart upon removal from the turbo, though in extreme cases bits of plastic can enter the turbo and destroy it. (see image above) Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve is piston based, with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. The valve has been proved on the VAG scene for many years. The spring is interchangeable for different levels of boost, and the solenoid is plug and play with the wiring harness which is included.   In order that you purchase the correct valve for your vehicle please refer to the fitment table below before ordering.   Product Code Fitment FM207V Recirc Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012 FMDVR60R Recirc Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards FMDVMCS Blow Off Adaptor Plate For 2007/8 Cooper S Turbo only FMDVR56A Blow Off Valve N14 Engines Cooper S 2007-10, JCW Cooper S 2007-2012 FMDVR60A Blow Off Valve N18 Engines Cooper S 2011 On, JCW Cooper S 2013 onwards        In The Box:1 x FMDVR60A Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x 2000mm Length of 4mm Vac Hose1 x Aluminium Spacer1 x M6 x 30 Hex Head Bolt1 x M6 Penny Washer1 x M6 Nyloc Nut1 x Uprated Red Spring10 x Cable Ties1 x 5mm T Piece1 x Forge Keyring and Sticker   Patent applied for This product is available in machined alloy finish only   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Our uprated valve for the Hyundai i30N has been expertly manufactured and designed in the UK, meaning we can provide the industry leading valve for your vehicle. Specifically designed for the Hyundai, this valve can be used either as a fully atmospheric (blow off) valve, or a recirculating valve - you choose! FITS: HyundaiElantraN 2022-i30NMk3 2018-2020 (Including Fastback)Mk3.5 2021- FaceliftKonaNVelosterN 2019-2020 T-6DIKiaStingerGT-Line ISG Auto 241BHP Highlights: Utilising world leading springs for more precise operation and consistency All internal and external components have been made in the UK, ensuring top quality, and offering a valve with faster response times and longer service intervals The piston uses heat stabilised Viton O-rings Lubricated with high temperature Mobil1 grease to ensure a long life with minimal wear and very long service intervals A super durable and responsive aluminium piston Fully serviceable and rebuildable in minutes Available in anodised black Unlike other valves on the market, ours produces no check engine lights (EML) Covered by the unique Forge Lifetime Warranty*     This part replaces OEM Part No. 282342-CTA4 This kit will include all the parts required for atmospheric or recirculating set up.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Blow Off, or dump valve, is for the Renault and Nissan Turbo engines that have the electronically controlled bypass valve (OEM Part no. 144839204R). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. Unfortunately, the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. This prevents the diaphragm from sealing. Our alternative is a fully engineered solution offering both significantly improved reliability. The Forge valve is piston based, there is no diaphragm to fail, and of all aluminium billet construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control, over valve actuation. In The Box:1 x FMDV23A Valve1 x 2000mm of 4mm Vacuum Tube1 x 50mm of 10mm Vacuum Tube1 x 3 port Solenoid and fixings13 x Cable Ties1 x Uprated Red Spring1 x 10-6-10 T Piece1 x Forge USB Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Product Description We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner This recirculating valve is for the Renault and Nissan Turbo engines that have the electronically controlled bypass valve (OEM Part no. 144839204R). It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. Unfortunately, the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. This prevents the diaphragm from sealing. Our alternative is a fully engineered solution offering both significantly improved reliability. The Forge valve is piston based, there is no diaphragm to fail, and of all aluminium billet construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control, over valve actuation. In The Box:1 x FMDV23R Valve1 x 2000mm of 4mm Vacuum Tube1 x 50mm of 10mm Vacuum Tube1 x 3 port Solenoid and fixings13 x Cable Ties1 x Uprated Red Spring1 x 10-6-10 T Piece1 x Forge USB Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.

Read more less

This Blow Off or Dump valve has been specifically designed for the Renault Megane RS250 RS265 and RS275. This kit includes a blanking plate, as the original or OEM valve should be removed to prevent issues with loss of boost pressure. This kit is available with either a red, blue, or black silicone hose, and contains everything needed for installation. Please select the colour required in the options above.   In The Box:1 x FMDVRMA Valve1 x 500mm of 4mm Vacuum Tube1 x 38mm Aluminium Hose Joiner1 x Uprated Blue Spring1 x MIE Blanking Plate1 x 45mm Hose Clamp 1 x Silicone Reducing Elbow #5881 x M6 Penny Washer1 x M6 Plain Washer1 x M6 x 16 Hex Head Bolt1 x M6 Nyloc Nut1 x 5mm T Piece1 x Instructions1 x Forge Sticker   If you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A complete kit which includes everything that you will need to install this Blow Off/Dump Valve to your Renault Megane 225/230 The valve comes in a hand polished finish, whilst the hoses come in a choice or red, blue, or black. Simply select your choice in the options above.   In The Box:1 x FMFK054 Blow Off Valve1 x Silicon Hose with Valve Take Off1 x 2000mm of 4mm Vacuum Tube1 x 35mm Hose Clamp2 x 60mm Hose Clamp1 x 5mm T Piece6 x Cable Ties1 x Uprated Blue Dump Valve Spring1 x Uprated Blue Small Spring1 x FMBPVRM Blanking Plate1 x Forge Sticker If you are unsure if this product is suitable for your application, please contact us.    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Designed by Forge to replace the original component on the Renault Megane 225/230 Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACMEG Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Recirculation or Diverter valve kit is specifically designed for the Renault Clio 1.6 200THP/220 Trophy   In The Box:1 x FMDVC200R Valve1 x Uprated Yellow Spring1 x Uprated Blue Spring3 x Cable Tie1 x 1000mm of 4mm Vacuum Tube4 x 35mm Hose Clamps1 x Silicon Hose #14591 x Silicon Hose #14581 x Vacuum Tap1 x M5 x 35 Self Tapper Screw1 x Blanking Plug1 x 2.5mm Allen key1 x Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below.   Click here to see our video on how to service this valve   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Blow off or Dump valve kit is specifically designed for the Renault Clio 1.6 200THP/220 Trophy   In The Box:1 x FMDVC200A Valve3 x Cable Ties1 x 1000mm of 4mm Vacuum Tube4 x 35mm Hose Clamps1 x Straight Silicone Hose (25mm x 65mm)1 x M5 x 35 Self Tapper Screw1 x 25mm Blanking Plug1 x Vacuum Tap1 x Silicon Hose #14591 x Blanking Plug1 x Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kits below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This valve is an upgrade for the 2.0 turbocharged M133 DE20 LA (265 kW 355BHP version)  engine found in the Mercedes AMG A45 upto 2015. The engine as supplied by AMG has a port for a dump valve on the side of the turbo, but it is blanked off. Whilst this is fine for the stock level of tune, as the boost is turned up when the car is remapped, driveability can be effected and the car can stutter on hard acceleration, which ultimately will reduce the life of the turbo. FITS: MercedesA Class W176 (2012-2018)A45AMG (2013-2015)CLA Class C117 (2013-2019)CLA45 (2013-2015)GLA Class X156 (2014-2019)GLA45 (Facelift 2015-) Our valve bolts straight up to the turbo and is supplied with appropriate hardware in order to source vacuum to operate the valve. The valve features an aluminium piston for longevity, and is fully serviceable and can be rebuilt with a range of springs to suit your level of power. "Fitted to my Facelift A45 AMG. Takes some time to fit but once installed in my opinion is well worth it. Sounds great, loud enough to put a smile on your face but not intrusive or "ricery". Also a great add on for anyone going Stage 2. Thanks again ✌"   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Designed specifically for the AMG A35 enthusiast Forge Motorsport are proud to release another Mercedes performance enhancement available in either atmospheric or recirculating versions. Developed and manufactured in Great Britain this product comprises of a 100% billet piston solenoid operated valve that integrates seamlessly with the OEM electronics resulting in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. These valves are engineered to remedy the failure issues experienced with the OEM solenoid valves when the diaphragm or plastic piston fails which would effectively result in a boost leak. With the A35 AMG gaining popularity within the tuning industry the forge valves are a must, they ensure that reliability and performance are the number one priority, further allowing the tuning of your A35 AMG.  Forge valves use full billet alloy construction with a piston based internal design that provides significantly improved reliability, lightning fast response and will withstand additional tuning upgrades. We recommend that you give yourself around 3 hours for the installation of this Forge product.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Designed specifically for the AMG A35 enthusiast Forge Motorsport are proud to release another Mercedes performance enhancement available in either atmospheric or recirculating versions. Developed and manufactured in Great Britain this product comprises of a 100% billet piston solenoid operated valve that integrates seamlessly with the OEM electronics resulting in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. These valves are engineered to remedy the failure issues experienced with the OEM solenoid valves when the diaphragm or plastic piston fails which would effectively result in a boost leak. With the A35 AMG gaining popularity within the tuning industry the forge valves are a must, they ensure that reliability and performance are the number one priority, further allowing the tuning of your A35 AMG.  Forge valves use full billet alloy construction with a piston based internal design that provides significantly improved reliability, lightning fast response and will withstand additional tuning upgrades. We recommend that you give yourself around 3 hours for the installation of this Forge product.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Forge are pleased to offer a Blow Off Valve (BOV) Adaptor for the Mercedes A180, A250, CLA 250 & GLA 250. The spacers were developed to produce the great atmospheric BOV sound that is expected from your turbocharged vehicle, although normally lacking on your vehicle. This CNC machined spacer, made from solid billet aluminium, gives you that sound you have been looking for. When letting off the throttle you get that sweet and satisfying “whoosh” letting everyone know your Mercedes is in fact turbocharged. It has been designed to work with the original electrically controlled solenoid and utilises high quality o-rings for a perfect seal. Mercedes equipped your car from the factory with a recirculating style turbocharger valve which allows the charge air to be routed around the turbocharger from the boost side back to the intake side. The downside to this style of system is it recirculates the hot air back into the intake side of the turbo, increasing temperatures. When equipping a vehicle with a Blow Off Adaptor like ours, it helps remedy this issue. This great solution for open air venting includes everything you will need for the install. FITS: MercedesA Class W176 (2012-2018)A160A180A200A220A250B-Class W246 (2011-2018)B160B180B200B220B250CLA Class C117 (2013-2019)CLA180CLA200CLA250GLA Class X156 (2014-2019)GLA180GLA200GLA250GLC Class X253 (2015-2019)GLC200GLC250   In The Box:1 x FMSPMERC Blow Off Adaptor3 x M6 x 35 Socket Cap Bolts1 x Forge Sticker    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Recirculation valve (quiet in operation) is for the BMW 235 3.0 Petrol Turbo engine, as found in the F22 chassis model that has a single electronically controlled bypass valve. This product is recommended for both unmodified vehicles and any vehicle where the boost pressure has been increased by an ECU software upgrade, as a replacement to the OEM bypass valve. Unfortunately the standard valve fails when the plastic deteriorates with age normally resulting in a check engine light. Unfortunately the valve may still partially function, so you may not be aware that you are losing power due to this. This particular failure can also result in the valve falling apart upon removal from the turbo, and in extreme cases, bits of plastic entering the turbo, resulting in serious damage. FITS: BMW1 SeriesF20/F21/F40 3/5 Dr Hatchback 2012 OnwardsM135i 2015-2016 (N55)2 SeriesF22/F23 2Dr Coupe/Convertible 2014 OnwardsM235i 2014-2016 (N55)F87 2Dr Coupe 2015 OnwardsM2 2015-2017 (N55) Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based, with no diaphragm to fail, and with a body of all aluminium construction. It’s also fully serviceable and the spring strength can be changed to suit increased boost levels. Most importantly it still also retains the desirable OEM ECU control over valve actuation, with the inclusion of an electrical harness that plugs straight into the BMW wiring. It’s literally plug and play.   THIS IS ONLY AVAILABLE IN BLACK   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Recirculation valve (quiet in operation) is for the BMW 135/235 N55 3.0 Turbo engines , as found in the F20 chassis models, that have the electronically controlled bypass valves. This product is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the OEM valve failures that have occurred. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. This prevents the diaphragm from sealing. This particular failure can also result in the valve falling apart upon removal from the turbo, and in extreme cases, bits of plastic entering the turbo, resulting in serious damage. Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve is piston based, with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation.   In The Box:1 x FMDVF20R Valve1 x 3000mm of 4mm Vacuum Tube1 x 100mm of 6mm Vacuum Tube1 x 50mm of 6mm Vacuum Tube1 x Solenoid, Bracket, and Screws10 x Cable Ties1 x Uprated Blue Spring1 x 8-4-8 T Piece1 x Forge USB Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Blow Off, or Dump valve, is for the BMW 135/235 N55 3.0 Turbo engines 2012-2013 are PWG (Pneumatic Waste Gate) , that have the electronically controlled bypass valves. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. This prevents the diaphragm from sealing. Our alternative is a fully engineered solution offering both significantly improved reliability. Our valve is piston based, with no diaphragm to fail, and of all aluminium construction, it replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control, over valve actuation.   In The Box:1 x FMDVF20A Valve1 x 3000mm of 4mm Vacuum Tube1 x 100mm of 6mm Vacuum Tube1 x 50mm of 6mm Vacuum Tube1 x Solenoid, Bracket, and Screws10 x Cable Ties1 x Uprated Blue Spring1 x 8-4-8 T Piece1 x Forge USB Instructions1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Blow Off, or Dump valve, is for the BMW N20 2.0 Turbo engines that have the electronically controlled bypass valve. This engine can be found in the F10,F20 and F30 chassis badged as 125i,225i, 220i, 228i, 320i, 328i, 520i and 528i. It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately the failure doesn’t always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. FITS: BMW1 SeriesF20/F21/F40 3/5 Dr Hatchback 2012 Onwards125i 2012-2015 (N20)2 SeriesF22/F23 2Dr Coupe/Convertible 2014 Onwards220i 2014-2016 (N20)228i 2014-2016 (N20)3 SeriesF30/F31 Saloon/Estate 2011-2019320i 2012-2015 (N20)328i 2012-2019 (N20)5 Series520iN20528iN20 Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. *Please note this will not fit B38-B48-B58 engines   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Blow Off, or Dump valve, is for the BMW N13 1.6 Turbo engines that have the electronically controlled bypass valve. This engine can be found in the F20/F21 and F30 chassis badged as 114i, 116i, 118i, 120i and 316i, 318i and 320i It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately, the failure does not always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. FITS: BMW1 SeriesF20/F21/F40 3/5 Dr Hatchback 2012 Onwards114i 2012-2015 (N13)116i 2012-2015 (N13)118i 2012-2015 (N13)120i 2015-2016 (N13)   Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. Not only that the internal spring can be changed for either a stronger or weaker version depending on how much boost pressure you are running.  In The Box x1 Atmospheric Valvex1 Aluminium connectorx1 length of Vacuum Tubex1 Uprated Springx1 Electronic Solenoid   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This recirculation valve, is for the BMW N13 1.6 Turbo engines that have the electronically controlled bypass valve. This engine can be found in the F20/F21 and F30 chassis badged as 114i,116i,118i and 120i and 316i and 318i It is recommended for any vehicle where the boost pressure has been increased by an ECU software upgrade and for unmodified vehicles operating in warmer climates, as a solution to the many failures that have occurred, where the original rubber diaphragm splits, which causes a loss of boost pressure. Unfortunately, the failure does not always result in a check engine light as the valve can still be blown open by the boost pressure, so you may not be aware that you are losing power due to this. FITS: BMW1 SeriesF20/F21/F40 3/5 Dr Hatchback 2012 Onwards114i 2012-2015 (N13)116i 2012-2015 (N13)118i 2012-2015 (N13)120i 2015-2016 (N13)     Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based with no diaphragm to fail, and of all aluminium construction. It replaces the original unit with a pressure/vacuum operated piston valve that still also retains the desirable OEM ECU control over valve actuation. Not only that the internal spring can be changed for either a stronger or weaker version depending on how much boost pressure you are running.    In The Box x1 Atmospheric Valvex1 Aluminium connectorx1 Length of Vacuum Tubex1 Uprated Springx1 Electronic Solenoid     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Suitable for the BMW 335 fitted with the N54 Twin Turbo engine. This alloy hard pipe fits to the throttle body and incorporates our high flow blow off valve. This valve, fresh from our R&D department, is the largest displacement valve that Forge have ever made! Featuring a 50mm (2”) aluminium piston so that there are no issues with split diaphragms, we have not found the power handling limits of this valve yet! FITS: BMW1 SeriesE82 2Dr Coupe 2007-2013135i 2007-2010 (N54)1M 2011-2012 (N54)E88 2Dr Convertible 2007-2013135i 2007-2010 (N54)1M1ME82 2dr Coupe 2011-2012 (N54)3 SeriesE90/E91/E92/E93 Coupe/Convertible/Saloon/Estate 2004-2013335i 2006-2009 (N54) The piston uses heat stabilised viton o-rings and high temperature grease to ensure a long life with minimal wear and very long service intervals. In The Box:1 x FMBM335DV1 Valve1 x Alloy Throttle Body Hard Pipe 1 x Silicone Reducer2 x Silicone Straight Blanks Hoses (25mm)2 x 30mm Hose Clamps1 x 80mm Hose Clamp1 x 90mm Hose Clamp2x M6 x 12 Socket Cap Bolts1 x M6 x 16 Socket Cap Bolts1 x M6 Penny Washer2 x M6 Plain Washer1 x USB Instructions1 x Forge Keyring, Bottle Opener and Sticker Note: that due to the high flow and low restriction offered by the 50mm valve, they are very quiet in operation. If you require a different spring setup, please see here   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less