All

Upgrade the exterior styling on your 2015+ Volkswagen MK7 / MK7.5 GTI or Golf R with the ECS Tuning Gloss Black Hatch Spoiler Extension. Our Hatch Spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the GTI and Golf R. Crafted from high quality vacuum formed gloss black ABS polymer that is enhanced with UV-stabilizer to achieve its world class appearance and durability while providing a sporty style that's sure to set your vehicle apart from the rest. Installs atop the factory hatch spoiler with no drilling, cutting or any permanent modifications.    PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Accentuates the OE body lines throughout the outer edge of the spoiler Designed to be an offset of the OE spoiler with a seamlessly integrated duck bill for the most OE plus appearance Smooth / seamless transition from the OE lines to ECS spoiler Retained OE side blade dimple feature that carries on above the doors Utilizes 3M double sided tape for a strong bond to the body on the top and bottom side of the OE spoiler to avoid any paint chafing Made from lightweight, vacuum formed gloss black ABS polymer that is enhanced with UV-stabilizer    PRODUCT DEVELOPMENT Our ECS Gloss Black Hatch Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Once you have the spoiler lined up, simply remove the liner on the pre-installed high strength dual sided tape sections and press the spoiler firmly onto the trunk lid. See our Installation Guide for general surface prep and installation.  4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. Previous Revisions 005098LA01 Cross Reference wing, lip This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

This polyester tow strap is far and above the best tow strap available for the Volkswagen chassis. ECS Tuning uses a heavy-duty, chemical-resistant polyester strap webbed around a stainless steel stud. There is plenty of length available for tow hooks to grab onto without hitting your bumper and damaging paint or causing cracks. This tow strap installs into the factory tow hook location in the front or rear bumper support.  A tow strap is a better pickup point than a fixed steel ring, which will add weight and protrude past the bumper. Some racing series have banned the steel rings because they increase the likelihood of contact during close racing. Our straps are sold in bright red, black or VW's famous MK7 plaid (red suggested for racing use as it makes it easy for tow truck operators and safety crews to spot).  Key Features:  303 stainless steel construction Machined flats to tighten the hook down with a wrench Lab tested to a break strength of 4,000 lbs.  Box stitched strap for strength Threads into factory tow hook locations Designed to be SCCA and NASA compliant for racing Black, Flame Red or MK7 Plaid strap color options Proudly engineered in-house and made in America! *Proper recovery and safety techniques should always be followed.  Never exceed the manufacturers recommended factory tow hook weight limit - not rated for aggressive recovery techniques or situations.  Previous Revisions 025265ECS01-07 Cross Reference tow hook, recovery This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your driving experience and interior appearance all at once with ECS Tuning!  Our in-house designed and engineered Paddle Shifters provide you with a much larger contact area for activation of the upshift and downshift paddles, meaning you're no longer confined to holding the steering wheel at a precise location when utilizing your paddle shifters   PART DESIGN Designed in-house using 3D laser scanning and CAD technology for precision fitment Inspired by OEM interior surfaces and contours for seamless integration into the interior Features -/+ symbol decals adhered under the clear coat, to resemble the OEM shift paddle Two-piece construction comes pre-assembled for ease-of installation Replaces factory plastic paddle, making for a crisp and concise feel Recessed finger grip area along entire back edge of paddle for enhanced grip ECS carbon fiber products are made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured Clear coated for excellent finish durability and UV resistance   PERFORMANCE FEATURES Paddle shifter extends along circumference of steering wheel and provides additional area for up/down shifting for greater working range while cornering  Maintains positive driving position by limiting “reach” to upshift/downshift   PRODUCT DEVELOPMENT Our ECS Paddle Shifters were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts in detail! See our Installation PDF under the INSTALLATION Tab for more information. Cross Reference flappy paddle, shift paddle, DSG, Tiptronic This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VII GLI 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade the exterior styling on your VW MK7.5 Golf R with our ECS Tuning In-House designed and engineered Carbon Fiber Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Carbon Fiber Diffuser!    PART DESIGN Made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured then clear coated for UV resistance. Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Additional, unique design feature extends the flaring lines of the OEM rear bumper cover to transition into our diffuser  Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" quad, round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal. Please note: May not be compatible with larger, aftermarket oval tips.  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.   KIT CONTENTS Carbon Fiber Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7.5 Golf R Carbon Fiber Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts in detail! See our Installation PDF under the INSTALLATION Tab for more information. Cross Reference valance, splitter This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Fits 2019 Mid-Facelift Bumpers Raise the level of style on your Mid-Facelift B9 A4 S-Line or S4 with the ECS Tuning gloss black front chin spoilers. These quality pieces were engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, these front lip spoilers will be sure to catch attention and turn heads. These ECS Tuning Front Chin Spoilers are made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. To compliment the look of your new front chin spoilers, check out the other ECS gloss black accessories, only available from ECS Tuning. *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. *Front Chin Spoilers were test fit on North American bumper models - Due to variances in front bumpers on ROW models, we cannot confirm fitment on models outside North America* This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Only Fits 2019 Mid-Facelift Bumpers Raise the level of style on your Mid-Facelift B9 A4 S-Line or S4 with the ECS Tuning gloss black 3-piece front lip. These quality pieces were engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, these front lip spoilers will be sure to catch attention and turn heads. This ECS Tuning Front Lip is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. To compliment the look of your new front lip, check out the other ECS gloss black accessories, only available from ECS Tuning. *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. *Front lip was test fit on North American bumper models - Due to variances in front bumpers on ROW models, we cannot confirm fitment on models outside North America* This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum and Type II black anodized for appearance and corrosion resistance.  This cap is not only designed to look great, featuring a post-machined universal "brake fluid" symbol, but fit and function just like the factory part with improved ergonomics.  The interior is designed to retain the OE gasket, simply transfer the gasket from your OEM cap to our ECS Billet Cap. Every detail was thought out, even the custom designed threads that maintain OEM ventilation functionality!  Proudly designed, engineered and made in the U.S.A!   Replaces OE# 5Q0611349A This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8S TTRS Quattro 2.5T Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.4 e-tron Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V FWD TDI Audi A3 8V Quattro 2.0T Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 A5 Quattro 2.0T Audi B9 A5 Quattro 2.0T Sportback Audi B9 Q5 Quattro 2.0T Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Tiguan MQB 4Motion 2.0T Gen3 Volkswagen Tiguan MQB FWD 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Enhance the intake system on your 2015+ Volkswagen GTI or Golf R to its fullest potential with our ECS Tuning Performance Air Inlet Scoops! Strategically placed within the grille, these help to grab and direct ambient air right into your aftermarket or modified OEM intake system's opening.  The factory grille leaves provisions that allow intake air into the inlet duct on the passenger side but leaves out a direct flow-path to the air inlet on the driver's side. From aftermarket dual air intake ducts to DIY'ers modifying their OEM grille to allow for a more direct route on the driver's side, our Product Development Team saw an opportunity to serve the aftermarket with a clean, OEM-type solution that not only provides for a cleaner install, but directs cool outside air directly into the air intake passage(s). To help you achieve the best results during installation each kit includes an adhesive-backed vinyl trim template for both left and right side positions that align to OEM features on the grille. Once in place, the scoop opening can then be easily cut open with a Dremel or hack saw/drill combo.    PART DESIGN The ECS Inlet Scoops are designed to work with OEM honeycomb and slant/bar style grilles on MK7 / MK7.5 GTI, Golf R and Alltrack models Manufactured from laser cut and CNC-bent 5052 sheet aluminum  Trim Plates are designed to replicate the OEM Honeycomb design and are fine wrinkle black powdercoated to match OEM-textured surfaces  Inlet Scoops are available in either fine wrinkle black or fine wrinkle red powdercoated finishes and available in either left-side, right-side, or combined locations   KIT CONTENTS Upper Trim Plate (Fine Wrinkle Black Honeycomb design)  Performance Inlet Scoop Kit  Pre-Installed ECS Tuning "Luft-Technik" Logo Plate with aluminum rivets  Pre-Installed Stainless steel press fit nuts  Stainless steel mounting bolts and washers  Trim Templates - Left & Right (Driver's and Passenger's Side)   PERFORMANCE FEATURES Maximizes the performance benefits of dual inlet intake systems by directing cold air coming through the grille up into the duct on both sides   PRODUCT DEVELOPMENT Our ECS Performance Inlet Scoop Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT MK7 GTI, Golf R, Alltrack and MK7.5 Golf R customers: Installation requires trimming and drilling of your factory grille to allow for intended use. MK7.5 Customers: Installation requires drilling and optional trimming of your factory grille to allow for intended use. We put together a full installation tutorial from start to finish including how to trim the inlet opening in detail! See our Installation PDF under the INSTALLATION Tab for more information. Due to confined space these are NOT compatible with our ECS Tuning Supertone Horn Kit.  Previous Revisions 022155ECS01-01 022155ECS01-03 022155ecs01-01KT 022155ECS01-02KT 022155ECS02-01KT 022155ECS02-02KT Cross Reference ram air This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

  The ECS Matte Black Left Side Engine Bay Cover creates a visual under hood transformation like no other! Made from a durable polymer, this engine cover will complete the look you are wanting!   PART DESIGN Our R&D Team spent a considerable amount of time designing every feature to perfectly execute the strict styling requirements associated with cleaning up your engine bay.  Our ECS Engine Bay Cover was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods   Matte black appearance with a slight textured finish, compliments the other under hood components for an integrated look   Covers the driver’s side of the engine bay, hiding the ugly ABS module, power steering reservoir, and other exposed wires and hoses    Simply clips into place with a rubber grommet and two hidden clips to an AC and brake line This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

 The ECS Matte Black Left Side Engine Bay Cover creates a visual under hood transformation like no other! Made from a durable polymer, this engine cover will complete the look you are wanting!   PART DESIGN Our R&D Team spent a considerable amount of time designing every feature to perfectly execute the strict styling requirements associated with cleaning up your engine bay.  Our ECS Engine Bay Cover was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods   Matte black appearance with a slight textured finish, compliments the other under hood components for an integrated look   Covers the driver’s side of the engine bay, hiding the ugly ABS module, power steering reservoir, and other exposed wires and hoses    Simply clips into place with a rubber grommet and two hidden clips to an AC and brake line This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your pre-facelift B9 A4 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a single tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Why just replace your commonly worn, peeling, or otherwise failed start/stop button, when you could upgrade with a reliable, "red" starter switch from the helpful folks at ECS Tuning? Using an OEM start/stop switch from a Genuine OEM source, the Research and Development Team at ECS Tuning were able to adapt this starter switch to your VW. Conveniently packaged and ready for install out of the box without any additional modifications or coding required. Simply replace and enjoy the newfound décor and quality.    FEATURES: Genuine OEM sourced  Modified in-house for VW MK7 / MK7.5 specific fitment In-house tested and validated to function on MK7 models with factory start/stop ignition switch Illuminated just like the factory silver starter switch  Direct replacement; no modifications or coding required   *Please note* You may notice a slight "ledge" on the driver's side edge of the push button hole opening.  This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling on your Audi with the ECS Tuning Gloss Black Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B5 S4 and A4. The spoiler is crafted of a durable UV stabilized ABS polymer to achieve it's deep high gloss shine and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up and the surface clean of any contaminants, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  Install the spoiler as-is or with proper surface prep, this spoiler can be painted to any color you like!   4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B5 A4 FWD 1.8T Audi B5 A4 FWD V6 12v Audi B5 A4 FWD V6 30v Audi B5 A4 Quattro 1.8T Audi B5 A4 Quattro V6 12v Audi B5 A4 Quattro V6 30v Audi B5 S4 All 2.7T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The ECS Tuning MQB Luft-Technik (Air Technology) Dual Air Inlet Duct is a premium in-house designed engine aspiration product that increases frontal air inlet area and lowers air inlet temperatures, all while blending automotive engineering into an artistic canvas of underhood beauty. The ECS Dual Air Inlet Duct replaces the undersized OEM air inlet duct in favor of a smoother flowing and larger capacity dual air inlet scoop designed to feed massive amounts of cold outside air directly into the air filter!  The OEM inlet duct was tailored to the majority of everyday drivers who prefer a muffled, relaxed driving experience. This came at the cost for air induction capacity and design. Inlet air is restricted to available airflow from two tiny passages on the opposite of the airbox at the front and rear of the inlet duct. At higher speeds we found that the rear-facing inlet draws in hot, engine-bay air into the airbox, increasing airbox inlet temps. The OEM inlet duct has further issues for performance-minded owners, such as a blocked off inlet passage directly in front of the airbox along with abrupt edges leading into the air inlet channel.  By replacing the factory inlet duct with the ECS Dual Inlet Duct, considerably more airflow is available to the air filter. Our design increases frontal cold air area by as much as +285.6% for a massive increase in cool, outside air! We also measured a reduction in airbox inlet temperature of -26° F at redline!    PART DESIGN The beautifully crafted inlet duct is manufactured from lightweight, heat resistant, textured matte black polymer. It's engineered for a perfect contour to the OEM core support and features a gradual taper to provide a smooth collection of cool outside air into the air filter.  Improves on the OE design by providing DIRECT airflow into the air box and maximizes available area by utilizing both sides of the front grille assembly  Stock Inlet Total Area (Hot & Cold Air) = 21.41in² Stock Duct Frontal Inlet Area (Cold Air) - 11.98in² Stock Duct Rear Inlet Area (Hot Air) - 9.43in² ECS Inlet Area (Cold Air Only) = 34.22in² Total area increase over OEM - +159.8% Frontal area (Cold Air) increase over OEM - +285.6% Compatible with OEM airbox or aftermarket intakes that utilize the OE air inlet scoop The flanged mating surface seals within the OEM airbox just like the stock inlet duct   PERFORMANCE FEATURES The increase in available air inlet volume easily translates into more airflow available to the air filter. Whether your vehicle is equipped with the stock airbox and a high-flow filter or utilizing an aftermarket intake system with the OE inlet scoop, the ECS Dual Inlet outperforms the OEM inlet in all areas. Not only does the ECS Inlet Duct feed a massive amount of greater airflow into the airbox from the frontal area but it eliminates the "hot air inlet" on the OEM inlet duct's engine bay inlet passage. Our Engineering team evaluated the performance of both products and found that with the OEM inlet duct, airbox temperatures increased dramatically at high RPM (~4,600 RPM+) due to airflow being pulled from the hot engine bay side. We measured up to 26° F. temperature decrease with our similarly designed ECS Carbon Fiber Dual Inlet Duct versus the OEM!   KIT CONTENTS Dual Air Inlet Duct - Lower and Upper sections All new mounting hardware and assembly hardware   PRODUCT DEVELOPMENT Our MQB "Luft-Technik" Dual Air Inlet Duct was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing. Our kit is compatible with the OEM expansion tank return hose, however, for improved aesthetics we recommend our "Silicone Coolant Hose Re-route Kit" - ES3638683, available separately.    INSTALLATION AND SUPPORT Need installation tips? We put together a full installation tutorial from start to finish including how to remove your OEM parts in detail! See our Installation PDF under the INSTALLATION Tab for more information. This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Tiguan MQB 4Motion 2.0T Gen3 Volkswagen Tiguan MQB FWD 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade the exterior styling on your 2018+ Volkswagen MK7.5 GTI with our ECS Tuning Gloss Black Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Gloss Black Diffuser!    PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Houses 4.0" exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser. Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer   KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7.5 GTI Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM valance in detail! See our Installation PDF under the INSTALLATION Tab for more information. Cross Reference valance, splitter This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Facelift FWD 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling on your Audi with the ECS Tuning Gloss Black Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the C7 A6 and S6. The spoiler is crafted of a durable UV stabilized ABS polymer to achieve it's deep high gloss shine and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up and the surface clean of any contaminants, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  Install the spoiler as-is or with proper surface prep, this spoiler can be painted to any color you like! 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi C7 A6 FWD 2.0T Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro 2.0T Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 Quattro V6 3.0T Audi C7 S6 Quattro 4.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

  The ECS MK6 Golf Side Skirt Extensions quickly install over the OEM skirts and add a wider, more aggressive stance without the troubles of a complete side skirt swap. They feature durable materials and are 3D designed for optimum fitment. 10 counter-sunk screw holes allow for rigid installation with the included Genuine VW self tapping torx screws.  Manufactured from a lightweight fibre composite material with a polymer matrix for enhanced durability and precision fitment. It’s finished in a gloss black clear coated finish to match other gloss black exterior components and is ready for install without the need of further paint or body work required. The lightweight side skirt extensions simply screw to your existing MK6 Golf R side skirts with the included hardware. Simply line up the skirt and hold into position, carefully drill 10 holes per side through the pre-molded countersunk mounting holes and enjoy your new visual transformation!  This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf R All 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your B7 A4. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a single tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi B7 A4 Quattro V6 3.2L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your facelift B8.5 S5 or A5 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling on your Audi with the ECS Tuning Gloss Black Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B8/B8.5 A5 (with integrated trunk spoiler) and S5. The spoiler is crafted of a durable UV stabilized ABS polymer to achieve it's deep high gloss shine and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up and the surface clean of any contaminants, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  Install the spoiler as-is or with proper surface prep, this spoiler can be painted to any color you like! 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your facelift B8.59 S5 or A5 S-Line with the ECS Tuning Gloss Black Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Grille Accent Set is made of beautiful vacuum formed and bonded gloss black polymer with UV-protection for extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design  Grille Flares extend around the inside of the inlet grille to cover any exposed paint   PRODUCT DEVELOPMENT Our ECS Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape. *Does not fit Competition models Note:  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B8.5 A5 S-Line or S5 with the ECS Tuning gloss black front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Lip Spoiler is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. Check out all of the other ECS gloss black accessories, only available from ECS Tuning! *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Give the front of your vehicle a classy touch of carbon fiber with this Carbon Fiber Front Grille Frame Overlay from ECS Tuning. Easily installs over top of your existing grille for a simple carbon fiber addition and in no time at all, your vehicle will look different from all the others. An easy, quick way to give your car a completely different personality. Made from lightweight, hand laid carbon fiber material with pre-impregnated carbon fiber cloth, epoxy resin and then finished in a durable gloss clear coat for UV and heat protection. Includes heavy duty 3M tape for easy, non-permanent installation.    Check out all of ECS Tuning's other available body modifications to give your Volkswagen a custom look.   **Due to product being hand trimmed, some minor deviations in fitment to the grille may expose underneath surface. For models with chrome grilles, black trim tape can be used on grille before applying overlay for the desired appearance.** * 2 of ES2918127 is suggested for proper installation.* This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf V All 2.0T Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

If you're looking for an easy, inexpensive way to enhance your underhood appearance or if your engine bay could use a touch of premium carbon fiber then we have you COVERED! Our ECS Tuning in-house designed and engineered Carbon Fiber Expansion Tank Cover Kit features precision 3D designed, gloss clear-coated carbon fiber overlays that simply lay over top of your OEM expansion tank and enhances the underhood appeal while covering up the ugly, grey plastic coolant tank. Our precisely modeled 2-piece overlays feature a smooth, appealing exterior design with provisions machined for clearance on OE features such as coolant hose connections and the coolant level sensor. Pre-applied high-temperature automotive-grade 3M foam tape ensures the parts stay in position while creating a great seal between the upper and lower covers.    PART DESIGN Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Made from lightweight, hand-laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured. Clear coated for excellent finish durability and UV resistance.  Hides the ugly, grey plastic expansion tank  Pre-applied foam tape creates a lasting connection to the expansion tank while creating a seal between the upper/lower covers. 3M foam tape is resistant to the continuous heat in the engine bay and is resistant to chemical degradation.  Lug features on the upper overlay covers the expansion tank vent and create a unique stylistic design  Incorporated sight-window allows visibility of coolant level with both covers installed  Expansion tank mounting bolts remain accessible, allowing removal of expansion tank while keeping the covers in place  Compatible with the following expansion tank caps: OEM, Audi R8, Porsche 991 and Gen3 "B"     PRODUCT DEVELOPMENT Our ECS Carbon Fiber Expansion Tank Cover Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Ensure your OEM expansion tank is clean and free of debris prior to installing self-adhesive foam strips. We recommend wiping the contact surfaces with isopropyl alcohol prior to installation. Reference our General Installation Guide for tips and suggestions.    NOTE: This part is for QTY 2 covers (upper and lower). All other items shown are for media reference only. This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Audi A3 8V FWD TDI Audi MK3 TT (2014+) Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Atlas 4Motion 2.0T Gen3 Volkswagen Atlas FWD 2.0T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Tiguan MQB 4Motion 2.0T Gen3 Volkswagen Tiguan MQB FWD 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less