All

As part of our expanding Ford product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit Mk6 ST150 models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight aluminium and comes in a high-quality powder coated black finish. It also features a sight glass to view the coolant level and comes with an uprated high-pressure cap. The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process. With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.  Features: Direct replacement header tank for the Mk6 Fiesta ST150 Lightweight aluminium construction High-quality black powder coat finish Sight glass to view coolant level Uprated high-pressure cap included No drilling or cutting required AIRTEC Part No: ATMSFO160

Read more less

  Fitment Audi    A6 (C7)   A6 (C6)   Q7 (4L 05-15)   Q5 (B8)   A8   S4 (B8)   S5 (B8) Volkswagen    Touareg (Mk3 20-) From the factory, Audi's 3.0T engine is equipped with a plastic thermostat housing. While sufficient when new, its plastic construction is prone to degradation over time. After enduring thousands of heat cycles and consistent exposure to chemical-rich antifreeze, the housing becomes brittle and begins to crack. Once the material is compromised, it can lead to a significant coolant leak, which, if left unchecked, may result in overheating and severe engine damage. This is especially problematic for the supercharged 3.0T, where maintaining proper engine temperature is critical for both performance and longevity. Our engineers set out to fix this issue with the ECS Billet Aluminum Thermostat Upgrade, engineered for enhanced durability, efficiency, and reliability. This precision-machined 6061 T6 billet aluminum thermostat replaces the failure-prone factory plastic housing, addressing one of the most common failure modes for all 3.0T supercharged engines. Designed with both performance and longevity in mind, this thermostat is the ultimate solution to overheating and coolant leaks, offering peace of mind in everyday driving and high-performance applications. The ECS Billet Aluminum Thermostat is the perfect choice for Audi 3.0T owners looking to enhance cooling system durability and reliability while eliminating the weaknesses of the OEM design. Take control of your engine’s performance and longevity today! PERFORMANCE FEATURES Our 6061-T6 billet aluminum housing is engineered for superior strength and reliability, offering exceptional resistance to cracking and warping. A striking red anodized finish provides corrosion resistance while adding a sleek aesthetic to your engine bay. The billet aluminum thermostat fin assembly features DLC (diamond-like coating) to reduce friction in thermostat operation, ensuring smooth and reliable performance. The internal return spring features a durable Zinc coating for exceptional longevity and corrosion resistance.  Our proprietary scraper seal is constructed from high-quality Viton rubber, providing a secure, leak-free seal for optimal cooling system performance. The ECS Billet Aluminum Thermostat Upgrade comes with an 80°C thermostat pre-installed for ease of assembly. BENEFITS Fixes Common Failure Modes: Eliminates the risk of cracking, leaking, and other issues associated with the OE plastic thermostat housing. Enhanced Cooling Performance: Maintains stable engine temperatures, even under demanding street or track conditions. Dual-Purpose Design: Built for high-performance enthusiasts while offering reliability for daily drivers. PRODUCT DEVELOPMENT Our ECS 3.0T Billet Aluminum Thermostat Upgrade was designed, engineered, tested, and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long-term product testing.

Read more less

  As part of our expanding BMW product range, AIRTEC Motorsport is proud to launch our replacement oil cooler kit for the E90, E92 and E93 M3 models, suitable for track or fast road use. With huge experience in developing external oil cooler packages for a variety of modified track and road cars, we chose to create a direct replacement oil cooler with a larger core to make the most of the space available in the original location.  As a result, our kit offers a huge capacity increase as well as improved cooling, thanks to a core that measures 79% bigger than the standard BMW oil cooler together with an increased frontal area of 17% over standard, which means there is more air flow passing through the core to help cool it.  The oil cooler attaches to the original oil lines and is supplied with new O-rings and replacement bolts as well as detailed fitting instructions for a simple installation process.   Features: Comprehensive kit designed specifically for the E9x M3 platform 79% larger core compared to standard  17% increase in frontal area compared to standard Improved capacity and oil cooling ability Direct replacement that fits in original location Reuses original oil line fittings Includes new O-rings and fixtures  Features detailed fitting guide AIRTEC part no: ATMSBMW17

Read more less

As part of our expanding Honda platform product range, AIRTEC Motorsport is proud to launch our external oil cooler kit for the FL5 Civic Type R, suitable for track or fast road use. With huge experience in developing external oil cooler packages for a variety of modified track and road cars, and aware of the FL5 Type R’s oil cooling issues during track use, the challenge with this kit was to neatly integrate a large capacity, external oil cooler where it could still benefit from direct air flow, whilst integrating seamlessly with the car’s existing fixtures and fittings with no drilling or cutting required. Unlike previous Type R models, mounting the oil cooler in the lower bumper wasn’t possible, so we chose to utilise the upper grille area and opted to design a unique oil cooler in order to make the very most of the limited space available, rather than use a generic off-the-shelf item.  As a result, in comparison to a universal 13-row oil cooler, our bespoke oil cooler has 45% more capacity and is 100%/twice as much frontal area, which means there is more air flow passing through the core to help cool it. We also purposely spaced the oil cooler away from the radiator to avoid any potential heat soak issues, creating a package that is unrivalled in the market. The comprehensive package includes bespoke laser-cut and powder-coated mounting brackets, high-quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. Its increased cooling efficiency and easy fitment makes it an essential modification for all modified FL5 Type R models. Dimensions: Height: 138mmWidth: 350mmDepth: 40mmCapacity: 1.93 litres Features: Bespoke oil cooler design developed for the FL5 platform 45% more volume than a universal cooler 100% more frontal area than a universal cooler Reduces temperatures on track and road Bespoke laser-cut and powder-coated brackets High-quality hoses and fittings No cutting or drilling required Comprehensive kit with all fixtures, fittings and instructions AIRTEC part no: ATMSHON04

Read more less

Focus Mk1 lightweight replacement polished alloy water header tankNo Drilling required, uses original fixing points and is a direct replacement for original Ford plastic header tank.Please note the Header tank comes with a non decorative cap, however for the perfect show look why not add a decorative cap. AIRTEC Part No: ATMSFO21

Read more less

RacingLine Oil Management Quick Drain KitA simple addition to make emptying the RacingLine Oil Management Kit quick, clean and simple! The RacingLine Drain Kit for our Oil Management System is a really simple addition that makes emptying the Oil Catch Can a quick, clean and simple operation.Simply screw the banjo connection into the base of the catch can and open the ball-valve using the lever to empty. Included is a 500mm silicone tube that attaches to the outlet of the valve to allow accurate draining into your waste oil container. This item removes the need to unbolt the catch can from the engine mount bolt each time, making your maintenance plan much easier.   Suitable for use with: - VWR13G700 - VWR13G500

Read more less

As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the ST 2.3-litre model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified Mk4 ST owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the upper grille area without obstructing the air intakes. As a result, our design includes a designated scoop on the left-hand side that supports the oil cooler and channels cold air towards the intakes. The package also includes an AIRTEC Motorsport oil cooler, bespoke laser-cut and powder coated brackets, high quality braided hose lines with Aerotec fittings, a thermostat-controlled sandwich plate and all fixtures and fittings, including instructions for a bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk4 Focus ST models. Features: Comprehensive kit designed specially for the Mk4 Focus ST platform Reduces temperatures on track and road Scoop directs constant feed of cold air to the intake Designed and developed in the UK No cutting or drilling required to fit Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures and detailed instructions

Read more less

As part of our expanding Toyota product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit Yaris GR models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight alloy and comes in a high quality powder coated black finish. It also features a sight glass to view the coolant level and comes with an uprated high pressure cap. The tank uses original fixing points, hoses and connectors so no drilling or cutting is required and fitting is a simple process. With an improved look to the engine bay and increased strength so the tank will not leak over time, this is a simple yet effective upgrade.  Please note: The Stant quick release high-pressure cap displayed in the images is for illustration purposes only, as Stant caps are no longer available. We now supply a replacement quick release high-pressure cap in a similar style. Features Direct replacement header tank for the Yaris GR Lightweight aluminium construction High quality black powder coat finish  Sight glass to view coolant level Uprated high pressure cap included No drilling or cutting required All fixtures included as well as fitting instructions AIRTEC Part No: ATMSYGR10

Read more less

As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the ST model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified Mk8 ST owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the front bumper. However, the Mk8 Fiesta has very limited available space directly behind the open grille area, which meant we developed an innovative solution that mounts the oil cooler in front of the right-hand side arch liner and is fed a constant flow of cool air by an air feed duct that’s included in the kit. The package also includes a AIRTEC Motorsport oil cooler, bespoke laser-cut and powder coated AIRTEC brackets, high quality braided hose lines with Aerotec fittings, a thermostat-controlled sandwich plate and all fixtures and fittings, including instructions, for a simple bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk8 ST models. Features: Comprehensive kit designed specially for the Mk8 Fiesta ST platform Reduces temperatures on track and road Front intake directs constant feed of cold air to the filter Designed and developed in the UK No cutting or drilling required to fit Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures and detailed instructions AIRTEC Part No: ATMSFO129

Read more less

As part of our expanding Ford Mustang product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit both the 2.3 EcoBoost and 5.0-litre V8 Mustang models. AIRTEC Part No: ATMSFO123 TECHNICAL DATA As part of our expanding Ford Mustang product range, AIRTEC Motorsport is proud to launch our header tank upgrade to suit both the 2.3 EcoBoost and 5.0-litre V8 Mustang models. A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from alloy and comes in a high quality powder coated black finish. It also  features a sight glass to view the coolant level and uses the original fixing points, hoses and cap. No drilling or cutting is required and fitting is a simple process with full instructions supplied. AIRTEC Part No: ATMSFO123

Read more less

2.0 TSI DSGgearbox oil cooler ​ For DQ 250 6-speed and DQ381 7-speed It's not just your engine oil that you need to protect. Your DSG gearbox is very susceptible to overheating, leading to protection mode that reduces engine power and eventually prevents gear selection. Why fit theDSG oil cooler kit? Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation.   Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues.  Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the engine torque, increase shift times and eventually loose gear selection. ooThe RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  - 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler - doubling up your cooling capability when it's needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. HIGH EFFICIENCY COOLER Our 10-row stacked plate design efficiently forces the hot oil through a series of aluminium pressed plates. Heat dissipates as cold air moves across the plates. 210 SERIES BRAIDED HOSE Our oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience. Protective external sheath avoids any rubbing damage in use.   TEMPERATURE CONTROL Our unique adaptor block oil take-off includes a clever internal thermostatic-control valve to direct oil flow through the cooler only when temperature hits 82°c/180°F. COLD AIR LOCATION The front-mount location brackets of the RacingLine cooler kit places it in the optimum airflow and ensures that oil temperature drops and excess heat is funnelled out efficiently. PRECISION MACHINED Precision machined billet components utilising the latest 5 Axis CNC machines for perfect accuracy, first time, every time.  LOW PROFILE COOLER The kit includes a replacement factory-spec oil/water cooler with a lower height, allowing for easy fitment without affecting the battery tray above it. CONFIRMED APPLICATIONS VWR29G7250 / DQ250 6-SPEED GEARBOXES ONLY * VWR29DQ381 / DQ381 7-SPEED GEARBOXES ONLY ​ *not for US-spec DQ250 with Secondary Air Intake (SAI) system > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+   DSG COOLER  FITMENT. As you’d expect, the RacingLine DSG Oil Cooler is a beautifully detailed complete kit, developed exclusively for MQB cars with either DQ250 6-speed or DQ381 7speed DSG gearbox.   The system is designed for straightforward fitting and ultimate reliability. Everything needed for perfect fitment is included.  Unlike other DSG oil cooler kits, the RacingLine package keeps the oil/water cooler and adds to it with the oil/air cooler 10 row stacked-plate oil cooler radiator, flowed to obtain maximum heat dissipation without undue pressure drop Optimum front mounted location behind left side front lower grill aperture with all necessary brackets and fixing kit supplied 210 Series stainless steel, nylon braided feed and return lines run past the chassis leg into the bumper cavity, then connecting to the oil cooler core DOUBLE COOLING. Our DSG Cooler design is a unique design: it retains the factory oil/water gearbox cooling system, plus adds our oil/air cooling as well. Why? The DSG oil will still quickly warm up from the hot water in the engine's coolant system, reaching full operating temperature as soon as possible. But that's where the problem begins on a hard-driven car. The hot engine coolant will now have little to no cooling effect on the DSG oil, and gearbox temps start to rise rapidly. That's the point at which our sophisticated thermostatic control valve inside the adaptor block will then divert hot oil out to the new 10-row cooler located in the cool fresh air flow. After the cooled transmission oil returns from the cooler, it carries less heat to be absorbed into the engine coolant system - helping control all the temperatures under the bonnet. Our replacement oil/water cooler (that's the silver part in the picture) is lower in height than the factory one. So the total height of both parts still fits perfectly under the battery location above it.  WHAT'S IN THE KIT?Oil cooler mounting brackets  AN10 210 series Nylon braided feed and return line Billet CNC thermostatic adaptor block Replacement, low-profile oil/water cooler AN10 10-row oil/air cooler core Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins BRACKET SETS The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models.  ​ Mounting for the bracket set requires drilling bolt holes through the front crash bar. GOLF 7 & 7.5 PLUS OTHER MQB MOUNTING AUDI S3 8V MOUNTING WHAT'S THE PROBLEM ON TRACK? When oil temperature reaches 138°C/280°F, the DSG's control system initiates a reduction in engine torque, meaning a serious drop in performance.   Carry on driving, and if temperatures then rise above 145°C/293°F, your DSG clutches no longer get the fluid pressure they require and you loose drive altogether as the box goes into a safety mode. ​ If you're in a hot climate this can happen after only about 15 minutes at the track - meaning a long wait while your gearbox cools down again. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Sophisticated thermostatic control adaptor block to divert oil flow around new cooling system - but only when needed Billet gloss-anodised for long-lasting protection and good looks Oil lines with protective outer nylon braid strengthened by a stainless steel inner weave for maximum resilience.  T6 6061 CNC aluminium used throughout for precision accurate fit 10-row stacked plate-design cooler efficiently forces the hot oil through a series of aluminium pressed plates.

Read more less

  Prestone Ready To Use Coolant/Antifreeze 1ltr (Can mix with any colour) Prestone Antifreeze is a high quality, universal coolant suitable for various vehicles, cooling systems and can even mix with all existing antifreeze. The Ready to use mixture can be poured straight into an empty, or part filled system. Features:> Prevents overheating during the summer, and avoids freezing during the winter Can be used in ANY Passenger vehicle (Petrol or Diesel) Can be mixed with ANY existing colour antifreeze 5 Year guarantee Prestone 4ltr Ready to use Universal Antifreeze Prestone Antifreeze is a high quality, universal coolant suitable for varius vehicles, cooling systems and can even mix with all existing antifreeze. The Ready to use mixture can be poured straight into an empty, or part filled system. Features: - Prevents overheating during the summer, and avoids freezing during the winter - Can be used in ANY Passenger vehicle (Petrol or Diesel) - Can be mixed with ANY existing colour antifreeze - 5 Year guarantee

Read more less

TRIPLE QX Blue Antifreeze/Coolant 1Ltr Our High quality Blue Antifreeze and Coolant has a powerful formula with 2 years protection for all seasons. It is suitable for any vehicle currently using Blue antifreeze / coolant and meets BC6589 (1992) Standard. Awarded BEST BUY by Car Mechanics Magazine based on heat / frost resistance and value for money! Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Blue Antifreeze/Coolant 5Ltr TRIPLE QX Blue Antifreeze/Coolant 20Ltr Performance LevelBS6580 (2010)ASTM D 3306 & ASTM D 4985SAE J 1034AFNOR NF R 15601Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

TRIPLE QX Red (Concentrate) Antifreeze/Coolant 1Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard. recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 5Ltr Our High quality Red Antifreeze and Coolant has a powerful formula with 5 years protection for all seasons. It is suitable for any vehicle currently using Red antifreeze / coolant and meets GL12+ Standard, incorporating the latest in Organic Acid Technology (OAT). Recommended by Car Mechanics Magazine who rated it on potency, heat capacity, versatility and value. Performance LevelBS6580 (2010)VW G-12/TL-774D & VW G-12+/TL-774FMAN 278 & MAN 324MB 325.3Renault 41-01-00Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Red (Concentrate) Antifreeze/Coolant 20Ltr Why not buy 20 litres to save you having to keep ordering more! 1 x 20litres of Red Concentrate Antifreeze/Coolant

Read more less

TRIPLE QX Purple Antifreeze/Coolant (G13) 1Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution.   TRIPLE QX Purple Concentrated Antifreeze/Coolant (G13) 5Ltr Fully Concentrated Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c TRIPLE QX Purple Antifreeze/Coolant (G13) Concentrate 20Ltr Like to have a clean windscreen? Why not buy 20 litres to save you having to keep ordering more! Performance Level BS6580 (2010) VW G-13/TL-774J & NF R 15601 TYPE 3 Protection: 50:50 mix - Up to -36c 33:67 mix - up to -20c

Read more less

TRIPLE QX Purple (G13) (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements TRIPLE QX Purple Ready Mixed Antifreeze/Coolant (G13) 5Ltr Ready Mix Triple QX MEG & Glycerine based antifreeze, incorporating the latest in Organic Acid Technology (OAT). It is environmentally sustainable and offers winter protection upto -36 C dilution. Purple (G13) Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-13/TL 774J & NF R 15601 type 3 It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 1Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements. TRIPLE QX Blue Ready Mixed Antifreeze/Coolant 5Ltr Ready Mix Ethylene Glycol based Antifreeze with Winter Protection up to -36 C upon dilution Blue Ready Mixed Antifreeze/Coolant - 5ltr Suitable for all engine types including aluminium, and conforms to British Standards BS6580 (2010) and ASTM D 3306 & ASTM D 4985, SAE J 1034, AFNOR NF R 15601. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 2 years in accordance with vehicle manufacturers requirements.

Read more less

TRIPLE QX Orange Concentrated Antifreeze/Coolant - 1ltr   TRIPLE QX Orange Concentrated Antifreeze/Coolant - 5ltr  

Read more less

TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 1ltr TRIPLE QX Orange Ready Mixed Antifreeze/Coolant - 5ltr Full organic long life coolant, 1-2-Ethanediol based Organic acid technology formula. Ethanediol based coolant, silicate, boron, phosphate, nitrite and amine free, which is a multipurpose long life formulation dedicated to engine which require . Dex-Cool coolant Recommended in engine cooling circuit which needs GM6277M norm   

Read more less

TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 1Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection upto -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements. TRIPLE QX Red (Ready Mixed) Antifreeze/Coolant 5Ltr Ready Mix Ethylene glycol based Antifreeze, incorporating the latest in Organic Acid Technology (OAT) with winter protection up to -36 C upon dilution Red (Ready Mixed) Antifreeze/Coolant - 5ltr Suitable for all engine types conforming to British Standards BS6580 (2010) and VW G-12/TL-774D & VW G-12+/TL-774F, MAN 248 & MAN 324, MB 325.3, Renault 41-01-002. It can be left in the system as a coolant and rust inhibitor for up to a maximum of 5 years in accordance with vehicle manufacturers requirements.

Read more less

AIRTEC Motorsport Oil Cooler Kit for Honda Civic FK8 Type R As part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is proud to launch our oil cooler kit suitable for track or fast road use. AIRTEC part no: ATMSFK802 TECHNICAL DATA AIRTEC Motorsport Oil Cooler Kit for Honda Civic FK8 Type R As part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is proud to launch our oil cooler kit suitable for track or fast road use. Following an extensive development process, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Type R for track or fast road use. Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. With limited space, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the bumper where it could still benefit from a direct airflow, whilst integrating seamlessly with the car’s existing fixtures and fittings with no drilling or cutting required. As a result, we have developed a kit that is completely reversible if need be. The comprehensive package includes a tried and tested 13-row AIRTEC oil cooler, bespoke laser-cut and powder-coated AIRTEC bracket, high quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. To ensure the maximum amount of air flow, we recommend removing the near side fog light and/or installing the exit vent into the wheel arch liner to provide better flow. However, these are not essential and the oil cooler will still work fine using the bumper’s original intake slots. Its increased cooling efficiency and easy fitment makes it an essential modification for all modified FK8 Type R models. Key features: Designed and developed in the UK Reduces temperatures on track and road Proven AIRTEC large capacity oil cooler Bespoke laser-cut and powder-coated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions Registered Design Right number: AIRTEC part no: ATMSFK802

Read more less

Following an extensive development process, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Yaris GR owners who struggle to maintain steady oil temperatures on track, or during fast road use. AIRTEC Part No: ATMSYGR04 TECHNICAL DATA AIRTEC Motorsport Oil Cooler Kit for Toyota Yaris GR. Following an extensive development process, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Yaris GR owners who struggle to maintain steady oil temperatures on track, or during fast road use. Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. The challenge with this kit was to integrate a large capacity, external oil cooler mounted neatly behind the grille for direct airflow, whilst integrating seamlessly with the car’s existing fixtures and fittings with no drilling or cutting required. As a result, we have developed a kit that is completely reversible if need be. The comprehensive package includes a tried and tested 13-row AIRTEC oil cooler, bespoke laser-cut and powdercoated AIRTEC brackets, high quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. Its cooling efficiency and easy fitment makes it an essential modification for all modified Yaris GR’s. Key features: Designed and developed in the UK No cutting or drilling required to fit Reduces temperatures on track and road Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions Registered Design Right numbers:  AIRTEC part no: ATMSYGR04

Read more less

TAKE THE PRESSURE. BEAUTIFUL BILLET REPLACEMENT EXPANSION CAP. Doesn't your pride and joy deserve better than cheap plastic parts in the engine bay?  WHY CHANGE? The RacingLine Coolant Expansion Tank Cap will keep your coolant expansion tank at its perfect pressure to be sure that your high-performance engine’s coolant system is performing exactly as it should.  The cap's a critical part of your car's cooling system to ensure that correct pressure is maintained, and never exceeded. Older, worn stock coolant caps loose the ability to hold correct pressure to keep the coolant at maximum efficiency. This is an engineered, billet replacement coolant cap to replace the cheap plastic one, with sophisticated internal springing and bleed off.  Don’t confuse this RacingLine full replacement cap with other cheap covers - which simply stick on over the plastic cap. We think your car deserves better than that. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC 5-axis technology. Each cap starts life as a solid billet of aerospace-quality 6061 aluminium. Sophisticated internal Japanese-made springing and bleed off mechanism. Polished, then gloss-anodised in stunning Midnight Black to stay beautiful for year after year. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 5 GTI 1.4 TSI 6R 2008-2015 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > VW ID.Buzz 2023+ > VW ID.4 2020+ > VW Amarok 2010-2020 > VW ID.3 2019+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Audi Q5 3.0 TDI II FY 2017+ > Audi Q4 E-tron 20210+ > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Arona 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Cupra Born 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Enyaq 2021+

Read more less

Racingline Oil Management System 2.0TFSI EA113 (TFSI) – VWR13G500 Not all catch cans are created equal. The Racingline Performance system has a dual function: as well as routing undesirable oil and moisture vapours through a sophisticated system of internal baffles and a fully baffled catch can, the Racingline Performance Oil Catch Can System also takes our track &motorsport experience of these engines to correct the problem of oil build-up in the top of the engine during high-G braking. The kit includes our Engine Breather Plate. So not only does the Racingline Performance Oil Management System condense these vapours into the bottom of the tank, keeping a purer air/fuel mixture and avoiding the problem of slowly filling intercooler and intake pipework with oil. The Engine Breather Plate included in the kit also protects your engine by helping to eradicate oil starvation in very high G braking Ð an issue when used on track, leading to several engine failures in Racingline Performance UK’s testing experience. Notes:Race Use Only, this kit will only fit if your vehicle does not have a Charcoal Canister, or if you have Deleted the Charcoal Canister. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR13G500

Read more less