All

 Tidy up your engine bay with a Proform Engine Bay Slam Panel cover.  These parts fit neatly over the existing factory slam panel.  Taking literally minutes to fit, this panel is the finishing touch to any detailed engine bay. There is no need to remove the bumper to fit this part.  Fixings and fitting instructions are included. Available in a range of finishes including our new Deluxe Carbon Fibre Effect Plastic. 'Speed Shapes' shown are for colour demonstration purposes only. Please note smooth for painting parts may contain minor manufacturing marks which will be easily removed during the preparation process.

Read more less

  Tidy up your interior with our set of 4 seat rail end covers (for the front of the front seats only). Please note these are to fit the seat rail ends from the Recaro seats fitted in the Mk2.5 Focus RS. Available in a selection of plastic colours/finishes. 'Speed Shapes' shown for colour demonstration purposes only. Please note smooth for painting plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Create a more aggressive look to the front end of your Mk7.5 Fiesta ST with our front lower bumper chin extension.  These parts are one piece that simply stick over the existing part and will be supplied with double sided tape along with additional self-tapping screws. In contrast to similar products on the market, our Gloss Black parts are made from high quality acrylic capped ABS plastic providing a high gloss finish. Our parts are also shaped to allow better fitment for cars that run a Stage 3 intercooler. These parts are available in our Smooth (for painting) and Gloss Black plastic finishes.  Please note these parts only fit the Mk7.5 Fiesta ST180 / ST200. Please note 'smooth' parts may contain minor manufacturing marks which will be easily removed during the preparation process.   Guaranteed fit for MK7 Fiesta ST180 MK7 Fiesta ST200

Read more less

Description  Please note if you select the 'RS' variant two of the panels will be 'frames' shaped around the factory fitted bonnet vents.  If you select 'All Other Variants' these parts will be supplied as full plates Gold and silver currently discontinued pending new material sourcing Add the finishing touch to your engine bay with our 14 piece Under Bonnet Panel set. Supplied in a range of plastic finishes, these parts are available with or without double sided tape as some customers prefer to fit the parts with sealant or their own adhesive tape.   CNC machined from high quality plastic these panels are much lighter than the stainless steel mirrored plates on the market reducing the risk of them dropping off and also the additional weight on the bonnet. These parts should fit any variant of Mk2.5 Focus but please double check the underside of your bonnet before purchasing and contact us if unsure. These parts are made from 2mm plastic material so can easily be cut if you have had aftermarket bonnet vents fitted. Please note the reflective finish on the Chrome variants may be slightly different to other metal products on the market - please see photos.   Guaranteed fit for Ford Focus Mk2.5 Ford Focus Mk2.5 Diesel Ford Focus Mk2.5 RS Ford Focus Mk2.5 ST

Read more less

Gold and silver currently discontinued pending new material sourcing Add the finishing touch to your engine bay with our 10 piece Under Bonnet Panel set. CNC machined from high quality plastic, these panels are much lighter than stainless steel mirrored plates, reducing the additional weight on the bonnet and the risk of them falling off. Supplied in a range of plastic finishes, these parts are available with or without double sided tape as some customers prefer to fit the parts with sealant or their own adhesive tape. Please note these parts may need to be modified if you have bonnet vents fitted, but the material is easy to cut. Some photos show parts still with protective film on.  High gloss/reflective finish underneath.  Please note that due to the positioning of the turbo on the Pre-2020 1.0 Ecoboost Engines, these panels could slightly distort due to heat.  We would recommend replacing the tape for magnetic tape on specific panels for show use only.  Please contact us for details. Guaranteed fit for Ford Fiesta Mk8 Ford Fiesta Mk8 ST Ford Fiesta Mk8 ST-Line

Read more less

Gold and silver currently discontinued pending new material sourcing Add the finishing touch to your engine bay with our 12 piece Under Bonnet Panel set. CNC machined from high quality plastic, these panels are much lighter than stainless steel mirrored plates, reducing the additional weight on the bonnet and the risk of them falling off. Supplied in a range of plastic finishes, these parts come with or without double sided tape applied as some customers prefer to use sealant or their own adhesive tape. Please note these parts may need to be modified if you have bonnet vents fitted, but the material is easy to cut.   These parts will fit all Mk6 Fiestas that have the bonnet recess shapes in the photos.  If you are unsure please contact us before purchasing. Guaranteed fit for Ford Fiesta Mk6 Ford Fiesta Mk6 Diesel

Read more less

Gold and silver currently discontinued pending new material sourcing Add the finishing touch to your engine bay with our 3 piece Under Bonnet Panel set. CNC machined from high quality plastic these panels are much lighter than the stainless steel mirrored plates on the market reducing the risk of them dropping off and also the additional weight on the bonnet. Panels come ready for fit with 3m tape applied.  Fitment is straight forward and takes 15 minutes - no cutting or drilling is required.  You will need to remove the bonnet sound pad to fit these items. Please note the reflective finish on the Chrome variants may be slightly different to other metal products on the market - please see photos.   Please ensure you select the correct vehicle variant as the parts are shaped slightly differently on the Mk3 and Mk3.5.   logo: If you would like a RS / ST logo vinyl sticker please email support@ceuk.org

Read more less

Gold and silver currently discontinued pending new material sourcing Add the finishing touch to your engine bay with our 16 piece Under Bonnet Panel set. CNC machined from high quality plastic, these panels are much lighter than other stainless steel mirrored plates on the market reducing the additional weight on the bonnet and the risk of them falling off. Supplied in a range of plastic finishes, these parts are available with or without double sided tape as some customers prefer to fit the parts with sealant or their own adhesive tape.  Please note silver and gold chrome finishes may have a slightly different reflective surface to other metal parts on the market - please see photos. Please note these parts may need to be modified if you have bonnet vents fitted. Some photos show parts still with protective film on.  High gloss/reflective finish underneath.  Other engine bay dress up items shown not included. Please note that with some of the 1.0 Ecoboost Engines, due to the positioning of the turbo, these panels could distort due to heat.  If you have one of these vehicles we would recommend attaching the four central panels with magnetic tape and remove them when driving. - please see photos. Please note these parts may need to be modified if you have bonnet vents fitted. logo: If you would like a RS / ST logo vinyl sticker please email support@ceuk.org Guaranteed fit for Ford Fiesta Mk7.5 Ford Fiesta Mk7.5 Diesel Ford Fiesta Mk7.5 ST180 Ford Fiesta ST180

Read more less

Description Brighten up your car key with a colour coded key cover! Professionally painted to match (or contrast if preferred) the colour of your car, these covers clip easily around your existing key. This is not a replacement shell, this product clips around the grey plastic shell supplied by Ford from the factory. Fitting takes a matter of seconds. These will fit any 'Keyless Start' key in the shape pictured but will not fit the 'Flip' style keys.  Just some of the compatible models include: Ford Fiesta Mk7.5 (inc ST) Ford Fiesta Mk8/8.5 Ford Focus Mk3/3.5 (inc RS/ST) Ford Puma Mk2 A small lanyard is supplied to help keep the key rings away from the paint but we strongly advise removing your key from your bunch of keys before fitting to avoid potential contact damage in your pocket.  The paint finish is resilient but not indestructible so dropping the item onto a hard surface (concrete etc) may result in damage. Please read fitting instructions supplied before attempting to fit item to existing key.   Guaranteed fit for Ford Fiesta Mk7.5 Ford Fiesta Mk8 Ford Fiesta Mk8.5 Ford Fiesta ST180 Ford Focus Mk3 Ford Focus Mk3.5 Ford Focus Mk4 Ford Puma Mk2

Read more less

Description A ("Show only") cover for Ford’s Mk3.5 Focus1.0 Ecoboost engine which has been carefully thought through to mount in place and hide the unsightly engine for the purpose of showing off your engine bay.  The cover is for cosmetic purposes only and must not be left on the car when driving (see further info below).  The cover can be easily fitted/removed in less than 5 minutes however. This cover has been designed to fit on a stock vehicle.  We are not able to accept responsibility for the cover not fitting if other after market parts are fitted. Where such parts have been fitted, you may need to adjust your cover to get it to fit correctly. Designed primarily for the custom car scene this cover gives you the chance to customise your engine bay rather than retro fitting a foam cover found on some Focus models.  Choose from our range of finishes including: Textured Grey Plastic (OEM look) Gloss Colours (Various) Smooth Grey Plastic (to prep/paint yourself) High Quality Painted/Hydrodip (contact us for more information) This part will fit all Mk3.5 Focus vehicles that have the 1.0 Ecoboost engine.  Please contact us before purchasing if you are unsure.  (Photos show a Fiesta with the same engine). Disclaimer:  Unlike our other engine covers, this particular cover must not be fitted to the car when driving.  Due to the positioning of the turbo on these vehicles, heat from your engine may distort it which can potentially damage engine bay components.  We cannot accept any responsibility for damage caused to your car if the cover has been left in place whilst the car has been driven. NB: Please note raw parts (smooth plastic for painting) may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform brake reservoir cover! Available in a range of finishes including smooth plastic (which comes ready to be prepared, sanded and painted/ hydrodipped), OEM factory style textured plastic, carbon fibre effect plastic as well as a range of gloss colours.   These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. Fitting over the top of your factory parts, these covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. Some pictures show part with removable protective film on.   Speed shapes pictured for colour demonstration purposes only. NB: Please note 'smooth' plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform coolant tank cover! Available in a range of finishes including smooth plastic (which comes ready to be prepared, sanded and painted / hydrodipped), OEM factory style textured plastic, carbon fibre effect plastic as well as a range of gloss colours.   These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. Fitting over the top of your factory parts, these covers can simply be removed for servicing or should you fancy changing the theme of your engine bay.   Some pictures show part with removable protective film on. Speed shapes pictured for colour demonstration purposes only. NB: Please note 'smooth' plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform fuse box cover! Available in a range of finishes including smooth plastic (which comes ready to be prepared, sanded and painted/ hydrodipped), OEM factory style textured plastic, carbon fibre effect plastic as well as a range of gloss colours.   These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. Fitting over the top of your factory parts, these covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. Some pictures show part with removable protective film on. Speed shapes pictured for colour demonstration purposes only. NB: Please note 'smooth' plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

A ("Show only") cover for Ford’s Mk3.5 Focus1.0 Ecoboost engine which has been carefully thought through to mount in place and hide the unsightly engine for the purpose of showing off your engine bay.  The cover is for cosmetic purposes only and must not be left on the car when driving (see further info below).  The cover can be easily fitted/removed in less than 5 minutes however. This cover has been designed to fit on a stock vehicle.  We are not able to accept responsibility for the cover not fitting if other after market parts are fitted. Where such parts have been fitted, you may need to adjust your cover to get it to fit correctly. Designed primarily for the custom car scene this cover gives you the chance to customise your engine bay rather than retro fitting a foam cover found on some Focus models.  Choose from our range of finishes including: Textured Grey Plastic (OEM look) Gloss Colours (Various) Smooth Grey Plastic (to prep/paint yourself) High Quality Painted/Hydrodip (contact us for more information) This part will fit all Mk3.5 Focus vehicles that have the 1.0 Ecoboost (2018-2020 variant) engine.  Please contact us before purchasing if you are unsure.  (Photos show a Fiesta with the same engine). Disclaimer:  Unlike our other engine covers, this particular cover must not be fitted to the car when driving.  Due to the positioning of the turbo on these vehicles, heat from your engine may distort it which can potentially damage engine bay components.  We cannot accept any responsibility for damage caused to your car if the cover has been left in place whilst the car has been driven. NB: Please note raw parts (smooth plastic for painting) may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform battery cover! Available in a range of finishes including smooth plastic (which comes ready to be prepared, sanded and painted/ hydrodipped), OEM factory style textured plastic, carbon fibre effect plastic as well as a range of gloss colours.   These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. Fitting over the top of your factory parts, these covers can simply be removed for servicing or should you fancy changing the theme of your engine bay.   Some pictures show part with removable protective film on. Speed shapes pictured for colour demonstration purposes only. NB: Please note 'smooth' plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform engine cover! Available in a range of finishes including smooth plastic (which comes ready to be prepared, sanded and painted/ hydrodipped), OEM factory style textured plastic, carbon fibre effect plastic as well as a range of gloss colours.   These covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. Fitting over the top of your factory parts, these covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. Some pictures show part with removable protective film on. Speed shapes pictured for colour demonstration purposes only. NB: Please note raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Engine Bay Dress Up Kit. These kits are designed to fit over the top of your existing covers and are secured in place using high quality adhesive Velcro, so there is no need to remove your OE covers.  These covers are available in a range of Gloss Plastic finishes (some photos show parts still with protective film on).  The coloured plastic covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Alternatively, the covers are available in smooth plastic (which is ready to be painted) along with textured OEM plastic.  A registered and bespoke design to us, each cover has been carefully designed so they are easy to prep, sand, paint and polish with no awkward corners and recesses. The covers can simply be removed for servicing or should you wish to change the theme of your engine bay (or if you sell the vehicle).  When fitted, the kit creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets.  The kit includes: Battery Cover Fuse Box Cover Coolant Tank Cover Fitting Kit / Instructions    Some pictures show part with removable protective film on. Speed shapes pictured for colour demonstration purposes only. NB: Please note 'smooth' plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with a Proform Washer Bottle Cap Cover. This item fits over your existing cap. Available in smooth plastic, which comes ready to be prepared, sanded and painted/ hydrodipped, and OEM factory style textured plastic. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Speed shapes pictured for colour sample only. NB: Please note raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

*** Please note the items may take 10 working days to be dispatched due to demand following launch *** Our new slam panel cover fits neatly over the existing factory slam panel and is fixed using strong double-sided tape (supplied).  Taking just minutes to fit, this panel is the finishing touch to any detailed engine bay. There is no need to remove the bumper to fit this part. Available in a range of Gloss plastic finishes, these parts can also be painted or hydrodipped as a custom order (please contact us for details). Why not add our Pre-Facelift slam panel end plates for the complete package? Buy together and save 10% on the price of the end plates (discount automatically applied at checkout). Please note that this item comes with fitment instructions but all vehicles are aligned differently from the factory so you may need to adjust your bonnet bump stops slightly to ensure bonnet clearance.  This listing is for the centre panel cover only and not the ends shown in some of the photos. This part will fit all Mk3 (Pre-Facelift) Focus ST vehicles only.  We are working on a version for other Mk3 variants that have a rubber gasket fitted. 'Speed shape' photos shown for colour demonstration purposes only

Read more less

Description A new ("Show only") cover for Ford’s Mk7.5 Fiesta1.0 Ecoboost engine which has been carefully thought through to mount in place and hide the unsightly engine for the purpose of showing off your engine bay.  The cover is for cosmetic purposes only and must not be left on the car when driving (see further info below).  The cover can be easily fitted/removed in less than 5 minutes however. This cover has been designed to fit on a stock vehicle.  We are not able to accept responsibility for the cover not fitting if other after market parts are fitted. Where such parts have been fitted, you may need to adjust your cover to get it to fit correctly. Designed primarily for the custom car scene this cover gives you the chance to customise your engine bay rather than retro fitting a foam cover found on some Focus models.  Choose from our range of finishes including: Textured Grey Plastic (OEM look) Gloss Colours (Various) Smooth Grey Plastic (to prep/paint yourself) High Quality Painted/Hydrodip (contact us for more information) This part will fit all Mk7.5 Fiesta vehicles that have the 1.0 Ecoboost engine.  Please contact us before purchasing if you are unsure. Disclaimer:  Unlike our other engine covers, this particular cover must not be fitted to the car when driving.  Due to the positioning of the turbo on these vehicles, heat from your engine may distort it which can potentially damage engine bay components.  We cannot accept any responsibility for damage caused to your car if the cover has been left in place whilst the car has been driven. NB: Please note raw parts (smooth plastic for painting) may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Description *** Please note these items are finished to order and may take up to 10 working days to be dispatched *** A pair of Mk8 Fiesta / MK2 Puma mirror covers professionally painted Gloss Black These fit all Mk8 Fiesta and MK2 Puma models. Guaranteed fit for Ford Fiesta Mk8 Ford Puma Mk2

Read more less

Tidy up your engine bay with a Proform Engine Bay Dress Up Kit. Ready to fit straight to your vehicle choose from a variety of finishes to best compliment your vehicle.  Available in raw plastic, which comes ready to be prepared, sanded and painted/ hydrodipped, and OEM factory style textured plastic. These covers are now also available in a range of coloured plastics, including our gloss carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. These kits are designed to fit over the top of your existing covers and are secured in place using high quality adhesive Velcro so there is no need to remove your OE covers. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the kit creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. Please ensure you select the correct variant for your vehicle as the header tank cover shape varies. The kit includes: Header Tank Cover Battery Cover Fuse Box Cover Fitting Kit Including Instructions

Read more less

Tidy up your engine bay with a Proform Engine Bay coolant tank cover. Supplied in smooth plastic; ready to be prepped and painted/hydrodipped; textured plastic for the OEM factory look or carbon fibre effect plastic. These covers are now also available in gloss black, gloss red, gloss blue, gloss white, gloss orange and gloss grey. The covers have been manufactured from coloured material rather than prepped painted and lacquered. This saving in labour is reflected in the price but please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. If you would like a colour matched set, please view our painted/ hydrodipped dress up kits listed elsewhere on the site. A registered and bespoke design to us, each of our covers have been carefully thought through so they are easy to prep, sand, paint and polish with no awkward tricky corners and recesses. The covers can simply be removed for servicing or should you fancy changing the theme of your engine bay. When fitted, the coolant tank cover creates a clean and tidy appearance to the engine bay, hiding the unsightly clips and brackets. When painted/ hydrodipped to a high standard the curved tops of these covers really shows off the paint finish or hydrodip print, and will really make your engine bay stand apart from the rest.  Fits all Mk7/7.5 Fiestas from 2009-2017 inc Diesel and 1.0 litre Ecoboost variants (inc ST Line) and the Fiesta ST180. Also available as part of our three piece Dress Up Kit.  This will only fit the Mk7.5 ST180 Fiestas that have not yet had the Ford coolant tank recall.  If your vehicle has had the recall, you will need this cover. NB: Please note raw parts (smooth plastic for painting) may contain manufacturing marks that would be easily removed during the preparation process.

Read more less

Tidy up your engine bay with one of our new domed Proform Coolant Cap Covers. Item fits over your existing cap to hide the unsightly mouldings. Supplied in smooth plastic, the item comes ready to be prepared, sanded and painted/ hydrodipped. Also available in OE style textured plastic, and range of coloured plastics including gloss black plastic and carbon fibre effect plastic. The covers have been manufactured from coloured material rather than prepped, painted and lacquered. Please bear in mind before purchasing that these are not perfectly colour matched to the vehicle colours. Fits all Mk 6/7/8 Fiesta and Mk 2/3/4 Focus models. NB: Please note the raw plastic parts may contain manufacturing marks that would be easily removed during the preparation process.

Read more less