All

Racingline Bonnet/Hood Gas Strut A Gas Strut conversion to lift & hold your bonnet/hood for Golf Mk8 (all models). A PRODUCT YOU SHOULDN’T NEED…..BUT DO! Just like it should have come from the factory… Our new Golf Mk8 Gas Strut conversion kit lets you get rid of the cheap bonnet prop that the car now comes with. Simple, and fully reversible DIY fit in ten minutes. No cutting or drilling required. After some experimentation, we have produced a gas strut with the correct length and pressure for the Golf 8 bonnet. Lifts and closes with the perfect resistance. Included is a high-grade stainless steel ball-end bracket, which screws onto the existing bonnet latch bracket stud – no new holes or drilling needed. At last – your bonnet will open easily and stay open while you’re working in the engine bay. Note: Will only fit Mk8 Golf models (nothing else!) Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR810002

Read more less

Racingline Brake Kit 5mm Hub Adaptor (Pair) 5×112 – VWR620005MM Clearance over big brake kits is always a challenge, especially with factory wheels. All of RacingLine’s brake kits feature our unique design that allows these 5mm Hub Adaptors to be solidly, mechanically mounted onto the front face of the disc to give you that extra clearance. No more adding loose spacers onto your car. Fitting and removal of the Hub Adaptor is a simple, reversible upgrade that takes minutes to do. If you ever plan to change wheels in the future, or if you run different wheels for road or track, or winter and summer, just fit or remove the adaptors to suit. As these Hub Adaptors are mechanically locked onto the disc hub, They aren’t  classified as spacers in countries where spacers are illegal. The 5mm of extra space will mean that the OEM factory wheels will fit over our brake kits. POSITIVE FIXATION  Clever ‘petal’ design (female on the disc, male on the Hub Adaptor) plus a fixing screw physically locks the two parts together. HIGH QUALITY Beautiful midnight-black gloss anodised finish will keep the Hub Adaptors looking beautiful and  corrosion -free. INSTALL & REMOVE Removal and refit just takes minutes to do if you ever change your wheels. Perfect for the: RacingLine Stage 2 Monoblock Performance Brake Kit RacingLine Stage 3 Forged Monoblock Performance Brake Kit​ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR620005MM

Read more less

Racingline Carbon Fibre Air Intake System RS4/RS5 (B9) 2.9 V6 TFSI Our latest Cold-Air Intake System kit for the current ‘B9’ Audi S4, RS4 and S5, RS5 enables cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for great power gains. Our High-Flow TriFoam™ triple-layer construction is simply the best filtration material on the market, and is the key to the power gains achieved Each filter is handmade in the UK The intake uses a clever design which retains the original Audi lower box of the intake, adding in a replacement lid, TriFoam™ filter and front intake scoop By reducing turbo spool by up to 500rpm in some cases through the enhanced efficiency of the system, lightning fast turbo response is guaranteed.  In our experience, no other intake kit gives higher gains It’s not just about performance; the beautiful carbon weave of the intake will enhance your engine bay every time you lift the bonnet! How does it sound? You’ll hear the rich induction noise from this race-bred intake as soon as you accelerate hard. However, as a fully-enclosed intake, volume levels are well-contained. Confirmed Applications Audi RS4 (B9) 2.9 V6 TFSI 2018+ Audi RS5 (B9) 2.9 V6 TFSI 2018+ Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR1241RS4

Read more less

2.0 TSI DSGgearbox oil cooler ​ For DQ 250 6-speed and DQ381 7-speed It's not just your engine oil that you need to protect. Your DSG gearbox is very susceptible to overheating, leading to protection mode that reduces engine power and eventually prevents gear selection. Why fit theDSG oil cooler kit? Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation.   Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues.  Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the engine torque, increase shift times and eventually loose gear selection. ooThe RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  - 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler - doubling up your cooling capability when it's needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. HIGH EFFICIENCY COOLER Our 10-row stacked plate design efficiently forces the hot oil through a series of aluminium pressed plates. Heat dissipates as cold air moves across the plates. 210 SERIES BRAIDED HOSE Our oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience. Protective external sheath avoids any rubbing damage in use.   TEMPERATURE CONTROL Our unique adaptor block oil take-off includes a clever internal thermostatic-control valve to direct oil flow through the cooler only when temperature hits 82°c/180°F. COLD AIR LOCATION The front-mount location brackets of the RacingLine cooler kit places it in the optimum airflow and ensures that oil temperature drops and excess heat is funnelled out efficiently. PRECISION MACHINED Precision machined billet components utilising the latest 5 Axis CNC machines for perfect accuracy, first time, every time.  LOW PROFILE COOLER The kit includes a replacement factory-spec oil/water cooler with a lower height, allowing for easy fitment without affecting the battery tray above it. CONFIRMED APPLICATIONS VWR29G7250 / DQ250 6-SPEED GEARBOXES ONLY * VWR29DQ381 / DQ381 7-SPEED GEARBOXES ONLY ​ *not for US-spec DQ250 with Secondary Air Intake (SAI) system > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+   DSG COOLER  FITMENT. As you’d expect, the RacingLine DSG Oil Cooler is a beautifully detailed complete kit, developed exclusively for MQB cars with either DQ250 6-speed or DQ381 7speed DSG gearbox.   The system is designed for straightforward fitting and ultimate reliability. Everything needed for perfect fitment is included.  Unlike other DSG oil cooler kits, the RacingLine package keeps the oil/water cooler and adds to it with the oil/air cooler 10 row stacked-plate oil cooler radiator, flowed to obtain maximum heat dissipation without undue pressure drop Optimum front mounted location behind left side front lower grill aperture with all necessary brackets and fixing kit supplied 210 Series stainless steel, nylon braided feed and return lines run past the chassis leg into the bumper cavity, then connecting to the oil cooler core DOUBLE COOLING. Our DSG Cooler design is a unique design: it retains the factory oil/water gearbox cooling system, plus adds our oil/air cooling as well. Why? The DSG oil will still quickly warm up from the hot water in the engine's coolant system, reaching full operating temperature as soon as possible. But that's where the problem begins on a hard-driven car. The hot engine coolant will now have little to no cooling effect on the DSG oil, and gearbox temps start to rise rapidly. That's the point at which our sophisticated thermostatic control valve inside the adaptor block will then divert hot oil out to the new 10-row cooler located in the cool fresh air flow. After the cooled transmission oil returns from the cooler, it carries less heat to be absorbed into the engine coolant system - helping control all the temperatures under the bonnet. Our replacement oil/water cooler (that's the silver part in the picture) is lower in height than the factory one. So the total height of both parts still fits perfectly under the battery location above it.  WHAT'S IN THE KIT?Oil cooler mounting brackets  AN10 210 series Nylon braided feed and return line Billet CNC thermostatic adaptor block Replacement, low-profile oil/water cooler AN10 10-row oil/air cooler core Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins BRACKET SETS The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models.  ​ Mounting for the bracket set requires drilling bolt holes through the front crash bar. GOLF 7 & 7.5 PLUS OTHER MQB MOUNTING AUDI S3 8V MOUNTING WHAT'S THE PROBLEM ON TRACK? When oil temperature reaches 138°C/280°F, the DSG's control system initiates a reduction in engine torque, meaning a serious drop in performance.   Carry on driving, and if temperatures then rise above 145°C/293°F, your DSG clutches no longer get the fluid pressure they require and you loose drive altogether as the box goes into a safety mode. ​ If you're in a hot climate this can happen after only about 15 minutes at the track - meaning a long wait while your gearbox cools down again. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Sophisticated thermostatic control adaptor block to divert oil flow around new cooling system - but only when needed Billet gloss-anodised for long-lasting protection and good looks Oil lines with protective outer nylon braid strengthened by a stainless steel inner weave for maximum resilience.  T6 6061 CNC aluminium used throughout for precision accurate fit 10-row stacked plate-design cooler efficiently forces the hot oil through a series of aluminium pressed plates.

Read more less

High-Flow Panel Air Filter – TT RS (8S) RS3 (8V) – VWR1130RS Looking for a simple, warranty-friendly upgrade for your car? Racingline’s HIgh-Flow Panel Air Filter for the latest and greatest Audi RS3 8V.2 and TTRS 2.5 TFSI cars replaces the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam filter. Allow your engine to breathe better and operate more efficiently – improve the engine’s airflow, and power and fuel economy gains will follow. By removing the inevitable restrictions that the standard paper panel filter gives, Racingline’s Panel Filter allows a small but worthwhile increase in airflow through to the turbo.    Simply put, it’s the best panel air filter you can buy. TRIFOAM® FILTER Racingline’s unique Trifoam® filter construction allows them to sandwich three different foams together for the perfect filtration and minimum restriction. HAND-MADE IN UK Each filter construction is hand-made in the UK for the reassurance of the highest quality together with exceptional dust-loading properties. EFFICIENCY GAINS The result?  More mid-range power and improved economy, without wrecking your warranty. CONFIRMED APPLICATIONS > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TTRS 2.5 TFSI 8S 2017+ > Audi RSQ3 F3 2019+ > Cupra Formentor VZ5 2.5 TFSI 2020+

Read more less

Racingline Performance High-Flow Replacement Filter - Audi RS6 / RS7 (C8) 4.0TFSIThe RacingLine High-Flow Panel Air Filter for Audi RS6 & RS7 C8 4.0 TFSI replaces the restrictive factory paper filter element with a much higher flow, reusable triple-layer Trifoam filter. Put simply, it’s the best Panel Air Filter you can buy for the V8TT. By allowing your engine to breathe better and operate more efficiently, you'll improve the engine’s airflow, and power and fuel economy gains will follow.By removing the significant restrictions that the standard paper panel filter gives, our giant Panel Filter allows a small but worthwhile increase in airflow through to the turbos. It's the perfect complement to either a stock car, or to Stage 1 tuning Confirmed applications. VWR1160RS >   Audi RS6 C8                                                          2018+ >   Audi RS6 Performance C8                            2023+ ​ >   Audi RS7 C8 4K8                                                2018+ >   Audi RS7 Performance C8 / 4K8                2023+

Read more less

2.0 TSI EA888.3 & EA888.3BBillet magneticoil sump plugfor all Volkswagen  I  Audi  I  Cupra  I  Skoda Catch any particles in your oil with our new Magnetic Oil Sump Drain Plug to protect your 2.0 TSI EA888 gen3 & 3B engine. What doesit do? Our Magnetic Oil Sump Drain Plug is now available for the 1.8 & 2.0 TSI EA888 gen3 and 2.0 TSI gen3B engines. These engines use a plastic oil pan, meaning that normal metal, screw-in sump plugs simply can't be used. Our new 'True-Lock' fitting system means that, at last, you can protect your engine. By attracting and separating out the minute abrasive and ferrous metal particles that are carried by the oil, it prevents them from circulating throughout your engine’s lubrication systems. The harder your engine works, the greater the risk of nasty metallic debris, the greater the benefit of using a magnetic sump plug. Our unique 'True-Lock' fitting works with a simple quarter-turn to install the plug, then a PolyCarbonate locking ring ensures that it stays tight and sealed at all times. It's a lifetime-use plug - simply replace the O-ring at each service. Install couldn’t be simpler – insist on our new Magnetic Billet Sump Plug with your next oil-change and simply screw it in!  PRECISION ENGINEERED FOR PERFECT PERFORMANCE. The large surface area of the magnetic end ensures any metallic particles in your oil are collected. Clever quarter-turn thread fits straight into the factory oil-pan with no changes needed. CNC constructed from billet 6061-T6 aircraft grade aluminium with gloss-black anodised finish. PolyCarbonate retaining clip allow simple and secure fitment with each oil service. The white laser-etched RacingLine logo is all part of the detail. CONFIRMED APPLICATIONS VWR180004 2.0 TSI & 1.8 TSI / EA888 Gen 3 engines 2.0 TSI  / EA888 Gen 3B engines > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Passat 2.0 TSI 190hp B8 2018+ > VW Arteon 2.0 TSI 2017+ > VW Arteon 2.0 TSI 190hp 2017+ > VW Arteon R 2.0 TSI 320ps 2020+ > VW T-Roc R 2.0 TSI 2019+ > VW T-Roc 2.0 TSI 190hp 2017+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi A3 40TFSI 2.0 TSI 190hp 2016-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi SQ2 2018+ > Audi Q2 40 TFSI 2.0 TSI 190hp 2017+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > Audi Q3 40 TFSI 2.0 TSI 190hp 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 2.0 TSI 190hp 5F 2018+ > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Ateca 2.0 TSI 190hp 2017+ > SEAT Tarraco 2.0 TSI 2018+ > SEAT Tarraco 2.0 TSI 190ps 2018+ > SEAT Tarraco 2.0 TSI 245ps 2021+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Octavia III 2.0 TSI 190hp 5E 2017-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+ > Skoda Superb III 2.0 TSI 190hp 3V 2019+ > Skoda Kodiaq 2018+ > Skoda Kodiaq 2.0 TSI 190hp 2018+

Read more less

Racingline MQB Propshaft Bearing Alignment Kit Our new MQB RacingLine Propshaft Bearing Alignment kit cuts out the factory tolerances to maintain accurate propshaft alignment every time, all of the time. Our precision-engineered, Propshaft Bearing Alignment Kit centralises the factory centre support bearing carrier by cutting out the enlarged factory hole tolerances. Meaning your propshaft is held in perfect true orientation at all times. The oversize holes on the factory brackets are designed to allow several degrees of ‘twist’ on the centre bearing carrier, causing unnecessary long-term stresses on the prop, bushes and bearings. That may be great to help the factory with quick production-line assembly, but will lead to accelerated wear on the bush and rubber housing from misalignment. Every hard launch & shift provokes movement in the drivetrain – over time this risks shifting the factory prop mount out of alignment. This simple alignment kit reduces the bolt hole size down from M14 to M8, allowing no further twist from the brackets and ensuring that your prop cannot move from this position. Fit this Propshaft Bearing Alignment Kit once, then forget it. Drive your car safe in the knowledge that your propshaft will remain in the correct alignment forever more and prolong the life of the bearings and bushings. Prior to our development, we were amazed how many cars were out of alignment from factory! Confirmed Applications For all MQB & MQB Evo AWD modelsVWR810009 VW Golf 8 R 2020+VW Golf 7 & 7.5 R 2013-2020VW Passat 2.0 BiTDI 4Motion B8 2015+VW Arteon 2.0 BiTDI 4Motion 2017+VW Arteon R 2.0 TSI 320ps 2020+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 BiTDI 2016+ Audi S3 8Y 2020+Audi S3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon III Cupra ST 4Drive 5F 2017-2020SEAT Tarraco 2.0 TSI 190ps 2018+Cupra Ateca 2018+Cupra Formentor 310PS 2020+ Skoda Superb III 2.0 TDI 3V 2015-2020Skoda Kodiaq vRS 2018+

Read more less

BILLET OIL FILTER HOUSINGAUDI B9 S4, RS4, S5, RS5, SQ5 STUNNING MIDNIGHT-BLACK GLOSS BILLET REPLACEMENT It’s all about the details, and that includes your engine compartment. WHY CHANGE? Tired of staring at your cheap, brittle plastic oil filter housing every time you lift your bonnet? Us too, and that's why we've come up with our beautiful billet Oil Filter Housing to replace it. It's made to match OEM dimensions right down to the original factory size hex nut. The Filter Housing accepts the factory engine oil filter to maintain simplicity and keep that OEM fitment for your future oil changes.  A quality part means you can forget about the problems of cracked plastic housings forevermore. CONFIRMED APPLICATIONS Audi S4 (B9) 3.0 V6 TFSI 2017+ Audi S5 (B9) 3.0 V6 TFSI 2017+ Audi RS4 (B9) 2.9 V6 TFSI 2018+ Audi RS5 (B9) 2.9 V6 TFSI 2018+ Audi SQ5 (B9) 3.0 V6 TFSI 2018+   PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC 5-axis technology. Polished, then gloss-anodised to stay beautiful for year after year.

Read more less

STYLE. WITH SUBSTANCE STUNNING CARBON FIBRE LID FOR R600 The RacingLine R600 Intake is the world's most sophisticated and best-selling MQB-platform cold air intake.If you already have an R600, why not add a Carbon Fibre Replacement Lid update to give your existing R600 intake a whole new look.  WHYUPGRADE? If you’re already running an R600 intake, you’ll know that it’s the most sophisticated intake available, combining OEM-standard design & quality with significant power gains.   But there's more good news. This new R600 Carbon Fibre Lid upgrade now gives you a chance to update your existing R600 with a whole new look in the engine bay. A simple replacement for any existing R600 intake lid. Simply unscrew the old lid and replace with the stunning new Carbon replacement. The quality of our carbon weave and finish is second to none. Offered in your choice of either a sophisticated matte finish, or stunning high gloss surface. Each lid is carefully hand-laid using pre-preg carbon fibre - which means we can achieve a smooth internal surface, stunning appearance and perfect fitment. This is supplied as a replacement lid only - to retrofit to any existing R600 intake. SOPHISTICATED MATTE CARBON FIBRE VWR121001 STUNNING HIGH GLOSS​ CARBON FIBRE VWR121000 SIMPLE FIT Fitted in minutes to any existing R600 intake of any age. Simply unscrew the old lid and replace it with the new carbon version. BEAUTIFUL  The exquisite detail of the carbon weave and the flawless surface finish will transform your engine bay appearance. In fact, it's almost a shame to hide it away! STRONG & LIGHT Each R600 lid is carefully hand-laid using autoclaved pre-preg carbon fibre for a strong & light construction with perfect dimensional accuracy. CONFIRMED APPLICATIONS ANY R600 INTAKE FOR 2.0 TSI & 1.8 TSI MQB / EA888.3 / 3B ​ GLOSS LID: VWR121000      MATTE LID: VWR121001 ​ NOTES: This is a lid only, for retro-fitting to any R600 Intake (VWR12G7R600/1/2) of any age. NOTE: this lid does not fit the new MQB 'EVO' intake. The Carbon Lid for this intake is coming soon.

Read more less

Stage 2 'EVO' MonoblockPerformance Big Brake Kit. Our new Stage 2 'EVO' Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it's the same pad as a Ferrari F40!).   Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. Why upgrade? All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 'EVO' Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars.   We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars.   MONOBLOCK The 'Monoblock' construction of our 4-piston aluminium thin-profile calipers give extreme stiffness and light weight, and aid in wheel clearance packaging (min 17" wheel). GROOVED & VENTED The 345mm x 30mm discs, with integral mounting bells, use our ‘Triple Groove’ design across the face for improved bite and debris clearance. DISC QUALITY A one-piece disc (rotor) made from high cast carbon - a mixture of high quality steel combined with carbon; giving a far higher friction coefficient compared to normal steel rotors. VWG-SPECIFIC Engineered exclusively for VWG cars, with piston sizes matched to master cylinders and servos for perfect responses and a beautiful pedal feel. SPORT PADS Composite Ceramic Sport Pads are included with the Stage 2 'EVO' kit with the ideal compound for fast-road use. The kit uses generic pad dimensions, meaning you can choose your ideal pad/brand. FULL INSTALL KIT Everything you need for installation: discs, callipers, mounting brackets, fast road pads, braided steel lines. Plus the option of Hub Adaptors for extra wheel clearance. Bolt on & drive Track use? This Stage 2 'EVO' kit has been developed as a highly effective fast road kit that also works for occasional track day usage. ​ However, if you're into regular heavy track use, this probably not the right kit for you! For track users, we strongly recommend our Stage 3 Forged Monoblock Brake Kit. BLACK CALIPER VWR652000-BLK VWR652003-BLK Sophisticated high gloss black RED CALIPER VWR652000-RED VWR652003-RED Colour matched to factory GTI BLUE CALIPER VWR652000-BLU VWR652003-BLU Colour matched to factory Golf 8R Hub Adaptors forperfect fitment. RacingLine’s brake kit features our unique design that allows these 5mm Hub Adaptors to be solidly, mechanically mounted onto the front face of the disc to give you that extra clearance. No more adding loose spacers onto your car (and approved in markets where spacers are illegal). ​ We recommend this 5mm Hub Adaptor for anyone using this brake kit under factory wheels. ​ PART NUMBER:  VWR620005MM Loseweight. Saving unsprung weight is really important on a performance car.    So we've spend a lot of our development and design time making sure that our 'EVO' Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving - as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers.   Confirmed applications. VWR652000 RED/BLK/BLU (MQB) > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ VWR652003 RED/BLK/BLU (A5 PLATFORM) > VW Golf 5 GTI 2005-2008 > VW Golf 5 R32 2005-2008 > VW Golf 5 GTI ED30/Pirelli 2006-2007 > VW Golf 6 GTI 2009-2014 > VW Golf 6 R 2009-2014 > VW Scirocco R 2009-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > SEAT Leon II Cupra/R 1P 2006-2012 > SEAT Leon II 1P 2005-2012 > Skoda Octavia II vRS 1Z 2004-2013

Read more less

TIGHTEN UP YOUR DYNAMICS Want to sharpen up your Polo GTI AW handling responses? Our beautiful billet and carbon Rear Body Brace reinforces the bodyshell at its weakest point for a more precise and pleasurable drive. WHAT DOES THE BODY BRACE DO? Modern cars like the Polo AW & other MQB A0 have a pretty stiff laser-welded bodyshell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially with stiff suspension. That's why cars like the Golf Clubsport S gets a factory rear brace.   The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together. The RacingLine Rear Body Brace uses solid billet aluminium mounts secured into the beautiful, ultra-stiff carbon fibre link bar drastically stiffening the rear of the chassis. By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the bodyshell flex, and the suspension geometry can work as it was designed to do. Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin The clever design means that installation GLOSS BLACK & CARBON POLO GTI AW VWR810003 IMPORTANT: Not to be used as a mounting point for seatbelts or race harnesses PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Brackets locate into rear seat mounts, no drilling or cutting All mounts are CNC 5-axis machined from solid billet 3K twill weave carbon fibre ultra-stiff 35mm link bar FEA design maximises stiffness whilst keeping weight down Aerospace-grade T6-6061 Aluminium bracketry used throughout CONFIRMED APPLICATIONS VWR810003 >    VW Polo GTI (AW) 2017+ >    Audi A1 (GB) 40 TFSI 2017+ >    SEAT Ibiza 6F 2017+ LOW PROFILE Thin, low-profile design means minimum impact on boot space and no effect on rear seat operation, up or down. EASY INSTALL/REMOVE Clever design means fitting is quick and simple. Completely reversible without trace for removal.  NO DRILLING No cutting, no drilling needed. By cleverly re-using the strongest parts of the body, there's no need to modify.   WHAT'S IN THE KIT? 2x Billet Mounting brackets Carbon Brace Bar All required fitting hardware

Read more less

POLO GTI mk6 AW 2017-2021 BOOST HOSE UPGRADE KIT. INTERNALLY WIRED, STEPPED, SUPER-STRONG SILICONE. The RacingLine Boost Hose Kit for Polo 6 GTI AW (2017-2021) smooths airflow and optimises routing - for more effective performance in high boost, high temperature use.  WHAT DO THEY DO? Welcome to the ultimate Boost Hose Kit for Polo GTI AW. The RacingLine Boost Hose package replaces the original rubber charge pipes with beautiful smooth-flowing silicone replacements, uniquely reinforced with internal wiring for guaranteed stiffness under the demands of high heat and boost levels.  By minimising restrictions, the smoother airflow and optimised routing ensures the turbo meets less resistance and can thus perform more effectively - moving a larger volume of air and minimising turbulence  Direct OEM replacement: simply remove the old weak, flexible rubber hoses and replace them with our four-piece kit Pressure tested far beyond the turbo’s capabilities, the system maintains performance under extreme temperature and high-boost conditions  Stepped internal joint transitions give a port-matched laminar airflow path, greatly reducing turbulence versus non-stepped designs FOUR PIECE KIT: The RacingLine Boost Hose Kit comes with four hoses included. 1. INTERCOOLER INLET 2. INTERCOOLER OUTLET 3. THROTTLE BODY 4. TURBO OUTLET PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Constructed from internally-wired reinforced high quality silicone, guaranteeing great rigidity to prevent deformation under high boost or heat loads Fluorosilicone interior surface resists oil and gasoline permeation providing extra protection against deterioration  Stainless steel Mikalor-brand clamps reduce the risk of boost leaks with increased connection strength and decreased hose slippage Multi-ply silicone outer construction is hand-wound for performance under extreme conditions, ensuring both heat and burst resistance    INTERNALLY-WIRED INTERCOOLER HOSES Within the kit, our unique super-strength Intercooler Boost Hoses have steel wire helix buried within the silicone construction to eliminate the very real risk of hose collapse, yet still allowing sufficient flexibility without wall distortion and minimising airflow blockage.    CONFIRMED APPLICATIONS MQB A0 with 2.0 TSI EA888 Gen 3B engines ​ >    VW Polo 6 GTI 2.0 TSI AW   2017-2021 ​ >    Audi A1 40TFSI GB   2019+

Read more less

Polo GTI (AW) Cold Air Intake (2017+) Our latest Cold-Air Intake System kit for the Polo GTI Mk6 AW enables cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for great power gains, particularly on tuned cars. Our giant High-Flow TriFoam™ triple-layer construction is simply the best filtration material on the market, and is the key to the power gains achieved Each filter is handmade in the UK, with a surface area over 20% larger than the factory filter at 51,950mm2 The intake uses stunning 3K twill carbon fibre for the one-piece front scoop and filter housing for ultra-light weight and improved thermal insulation to keep IATs down It’s not just about performance; the stunning carbon weave of the intake (in your choice of gloss or matte finish) will enhance your engine bay every time you lift the bonnet! Our unique giant Trifoam® filter construction at the heart of this intake is over 20% larger than factory, and hand-made in the UK for the perfect filtration and minimum restriction. You’ll hear the rich induction noise from this race-bred intake as soon as you accelerate hard. However, as a fully-enclosed intake, volume levels are well-contained. Lots of cold, fresh air is collected via the single-piece intake scoop, with CFD-developed internal airflow to feed the whole filter surface area, with minimal turbulence. Intake Options VWR12P2GTG Gloss Finish VWR12P2GTM Matte Finish Applications Please note, customers are wholly responsible for checking fitment for their vehicle.

Read more less

POLO GTI MK6 AWUPRATED ENGINE MOTOR MOUNT. TRANSFORM YOUR DRIVE. Get your power to the road or track where you need it from the RacingLine Engine Mounts. WHAT IT DOES. To harness your power increases, and transfer that power to the road or track where you need it, our ultra-strong Uprated Engine Mount will give a much more solid drive, and crucially add durability to any high-powered or hard-driven car. Our Uprated Engine Mount is a CNC-machined, fully engineered replacement part, designed to greatly decrease engine and transmission rocking movement, ensuring clean transfer of power to the road.    The risk of that horrible wheel-hop under launches and hard acceleration is almost eliminated as the whole engine and 'box assembly is now firmly prevented from juddering when wheelspin occurs. CONFIRMED APPLICATIONSFor MQB A0 models with 2.0 TSI EA888.3 & 2.0 TSI EA888.4 VWR150001 >    VW Polo 6 GTI 2.0 TSI AW   2017+ >    Audi A1 40TFSI GB   2019+

Read more less

Racingline 1.0TSI Inlet & Air Filter Package – EA211 Engines Looking for a simple, upgrade for your 1.0TSI? Together these upgrades allow greatly increased airflow from your intake into the turbocharger for lightning fast turbo response and a worthwhile power gain. The High-Flow Panel Air Filter is now available for cars fitted with the latest 1.0 TSI engine to replace the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam® filter. Put simply, it’s the best Panel Air Filter you can buy. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part. Allow your engine to breathe better and operate more efficiently – improve the engine’s airflow, and power and fuel economy gains will follow. By removing the inevitable restrictions that the standard paper panel filter gives, our Panel Filter allows a small but worthwhile increase in airflow through to the turbo. Confirmed Applications All models fitted with the current EA211 1.0 TSI engine; Volkswagen UP GTI 2016+ Volkswagen UP 1.0 TSI 2016+ Volkswagen Polo 1.0 TSI 2017+ AW Volkswagen Polo 1.0 TSI 2014+ AW Volkswagen Golf 7 & 7.5 1.0 TSI 2015-2020 Volkswagen Caddy 1.0 TSI 2015-2020 Volkswagen T-Roc 1.0 TSI 2017+ Volkswagen T-Cross 1.0 TSI 2017+ Volkswagen Touran 1.0 TSI 2018+ Audi A1 1.0 TSI 2015+ Audi Q2 1.0 TSI 2016+ Audi A3 1.0 TSI 2016+ Seat Ibiza 1.0 TSI 2015+ Seat Leon 1.0 TSI 2015+ Seat Arona 1.0 TSI 2017+ Seats Ateca 1.0 TSI 2016+ Seats Toledo 1.0 TSI 2017+ Skoda Fabia 1.0 TSI 2014+ Skoda Octavia 1.0 TSI 2016+ Skoda Karoq 1.0 TSI 2017+ Skoda Rapid 1.0 TSI 2017+ Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR11UPINTPKG

Read more less

RacingLine's high-performance cold-air induction systems for MQB 2.0 TDI cars. WHAT'S SO SPECIAL? One of our most popular products is the VWR Cold-Air Intake System kit, enabling cold, dense air from outside the engine bay to reach the fuel metering unit more efficiently for 2.0 TDI engined Golf 7 and other MQB-platform cars Our giant high-flow filter construction is simply the best filtration material on the market, and is the key to the power gains achieved.  Each filter is handmade in the UK.   Developed for use in our TDI Volkswagen Racing cars, the system delivers really impressive airflow gains - as much as 9% higher at peak power than original intake system.  By reducing turbo spool by up to 500rpm in some cases through the enhanced efficiency of the system, lightning fast turbo response is guaranteed.  In our experience, no other intake kit gives higher gains. GIANT FILTER Your choice of our unique Trifoam® or Pleated Cotton filter construction, hand-made in the UK for the perfect filtration and minimum restriction. SOUND QUALITY You'll hear the rich induction noise from this race-bred intake as soon as you accelerate hard. However, as a fully-enclosed intake, volume levels are well-contained. POWER GAINS Efficient filtration and huge filter surface area means power and torque gains support higher power remaps PRECISION ENGINEERED FOR PERFECT PERFORMANCE. A fully-enclosed gloss Midnight Black anodised aluminium spinning contains the high flow triple-layer cone filter Giant Trifoam™ or Pleated Cotton filter construction, gives an exceptionally high level of filtration Fully-formed front scoop for perfect fitment to front panel A sophisticated hose clamp allows for continuous clamping pressure around the entire hose CONFIRMED APPLICATIONS > VW Golf 7 & 7.5 2.0 TDI / GTD 2013-2020 > VW Passat 2.0 TDI B8 2015+ > VW Arteon 2.0 TDI 2017+ > VW T-Roc 2.0 TDI 2017+ > Audi A3 8V 2.0 TDI 2013-2020 > Audi TT 2.0 TDI 8S 2014+ > Audi Q2 2.0 TDI 2017+ > SEAT Leon III 2.0 TDI 5F 2013-2020 > SEAT Ateca 2.0 TDI 2016+ > Skoda Octavia III vRS 2.0 TDI 5E 2014-2020 > Skoda Octavia III 5E 2.0 TDI 2014-2020 > Skoda Superb III 2.0 TDI 3V 2015+

Read more less

2.0 TSI & 2.0 TDIHigh-FlowPanel Air Filter. Set your MQB & MQB 'Evo' 2.0 TSI, 1.8 TSI or 2.0 TDI engine free by allowing it to breathe better and operate more efficiently.VWR11G701 What doesit do? Looking for a simple, warranty-friendly upgrade for your car? ​ Our High-Flow Panel Air Filters, available for all Volkswagen Group 'MQB' 2.0 TSI, 1.8 TSI & 2.0 TDI cars, replace the restrictive factory paper filters with an improved, high flow and reusable lifetime triple-layer Trifoam® filter. Put simply, it’s the best Panel Air Filter you can buy. OEM-standards of design, quality, materials and construction, hand-made in the UK. Fits like a factory part; lasts like a factory part Allow your engine to breathe better and operate more efficiently – improve the engine’s airflow, and power and fuel economy gains will follow.  By removing the inevitable restrictions that the standard paper panel filter gives, our Panel Filter allows a small but worthwhile increase in airflow through to the turbo.    TRIFOAM® FILTER Our unique Trifoam® filter construction allows us to sandwich three different foams together for the perfect filtration and minimum restriction. HAND-MADE IN UK Each filter construction is hand-made in the UK for the reassurance of the highest quality together with exceptional dust-loading properties. EFFICIENCY GAINS The result?  More mid-range power and improved economy, without wrecking your warranty PETROL/GAS ENGINES All MQB/MQBE 1.8 & 2.0 TSI DIESEL ENGINES All MQB/MQBE 2.0 TDI   Confirmed applications. VWR11G701All MQB / MQB 'Evo' VW / AUDI / SEAT / CUPRA / SKODA2.0 TSI EA888.3 & EA888.41.8 TSI EA888.32.0 TDI EA288 & EA189 > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Golf 7 & 7.5 2.0 TDI / GTD 2013-2020 > VW Passat 2.0 TDI B8 2015+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TDI 2017+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW T-Roc 2.0 TDI 2017+ > VW Tiguan II 2.0 TDI 2016+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi A3 8V 2.0 TDI 2013-2020 > Audi TT 2.0 TDI 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 2018+ > Audi Q2 2.0 TDI 2017+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > SEAT Leon III 2.0 TDI 5F 2013-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Ateca 2.0 TDI 2016+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Octavia III vRS 2.0 TDI 5E 2014-2020 > Skoda Octavia III 5E 2.0 TDI 2014-2020 > Skoda Superb III 2.0 TDI 3V 2015+ > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

Replacement Brake Pads for the Racingline ‘Stage 2’ 4-Piston Calipers – Stock CompoundThese are designed for standard road use and light fast road use. These are the ones which come in the kit when new.Wear indicators are fitted to these pads – Sport Plus CompoundThese are designed for more aggressive fast road use and ocasional ‘beginner’ track days. They have the same bite from cold as the stock compound, but an extended heat range.Some additional ‘pad noise’ and brake dust will be noticedWear indicators are not fitted to these pads – Track CompoundThese are designed for Track use only. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature.Additional pad noise and brake dust will be noticed.Wear indicators are not fitted to these pads Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR67000

Read more less

ADJUSTABLEDROP LINKS. RACE-PROVEN FOR YOUR ROAD CAR. The RacingLine Adjustable Droplinks are an essential upgrade to any lowered or performance car. WHAT THEY DO. If you’ve lowered your car, our Adjustable Drop Links are an essential upgrade to zero the pre-load on your anti-roll bar geometry, plus add stiffness and precision by replacing the stock rubber joints with ball joints.  The drop link attaches the front anti roll bar ends to the front damper.  The OEM links were made the length they are for a reason - to compliment the standard ride height.  But when you lower ride height, the car will now be pulling your anti roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle. Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners. These links were developed for our race cars to allow the anti roll bar to work the way it should. Adjusting the height of droplinks to the equivalent of the lowering amount is a must. Available in two lengths: 250mm for almost all applications. Or, 200mm length for cars running our TrackSport suspension or any other coilover kit with adjustable sway-bar perch. ADJUSTABLE 30mm of adjustable length to zero preload on the Anti Roll Bar. Choice of two lengths to suit different ride heights. ​ ​ PRECISE By replacing the soft rubber bushing in the factory links with motorsport-spec ball joints, cornering and steering responses are sharpened. RACE-PROVEN Developed for our race cars, yet no compromise for road cars. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. 30mm of adjustable length to zero the preload on the Anti Roll Bar Lightweight CNC-machined 6061-T2 Aluminum bodies with beautiful gloss black anodised coating Left / Right threaded ends make for easy length adjustment Motorsport-specification ball joint ends - high strength teflon-lined steel Rubber dust boots fitted to protect the joints  CONFIRMED APPLICATIONS VWR420000250mm length -All applications VWR420001200mm length - Coilover set-ups with adjustable roll-bar drop link mounts > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi TT II 8J 2006-2014 > Audi TTRS II 8J 2009-2014 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Leon II 1P 2005-2012 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Octavia II 1Z 2004-2013 > Skoda Superb III 3V 2015+

Read more less

ADJUSTABLE REAR DROPLINKS. RACE-PROVEN FOR YOUR ROAD CAR. The RacingLine Adjustable Rear Droplinks are an essential upgrade to any lowered or performance car WHAT THEY DO. Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements.Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar. Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar. As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars. Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier.  Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time. ADJUSTABLE When you lower ride height, the geometry will now be adding preload to your anti roll bar. It's vital to adjust this back to neutral with the +/- 5mm adjustment built-in. PRECISE Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners. Increase durometer rubber bushing creates direct response for anti-roll bar under cornering conditions RACE-PROVEN Developed for our race cars - adjusting out the sway bar preload allows the anti roll bar to work within its correct operating envelope is an essential part of geometry set-up. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Motorsport-specification ball joint ends - high strength teflon-lined steel +/- 5mm of adjustable length with stainless steel insert to zero Anti Roll Bar preload  Increase durometer rubber bush to create direct response for anti-roll bar under cornering conditions Rubber dust boots fitted to protect the joints  Left / Right threaded ends make for easy length adjustment in-situ without having to detach and re-attach Lightweight CNC-machined 6061-T6 Aluminum bodies with beautiful gloss black anodised coating CONFIRMED APPLICATIONS VWR520000 (supplied as a pair) > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+

Read more less

Racingline Audi Mk2 TT 2.0 Air Intake System This Racingline cold air intake system has been developed exclusively for the 2.0 TFSI K03 engine – meaning that fitting is straight forward and the original mounting points are retained. The Trifoam filter construction, a triple-layer laminate of open-cell polyurethane foam, which gives an exceptionally high level of filtration, the very same technology as some Formula One engines use. With efficient filtration and huge filter surface area means power and torque gains support higher power remaps, and can even show an economy improvement. This is a ‘lifetime’ filter, so never needs replacement in normal service. Cleaning is only required every 20,000 miles (30,000km) in normal usage. This Racingline Cold air intake is hand-built in the UK, using the highest quality materials and construction. With regards to sound quality you will hear the rich induction noise from this race-bred intake as soon as you accelerate hard. However, as a fully-enclosed intake, volume levels are well-contained. Professional fitting strongly recommended. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR121020

Read more less

Racingline Air Intake System Audi TT 2.0 TFSI 211ps (EA888 Gen 2) – VWR121020ML For IHI Turbos (no MAF sensor). Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR121020ML

Read more less

Sharpen up the Audi S4/S5 B9’s handling response and steering feel. Racingline Performance’s beautiful new billet Strut Brace replaces the cheap factory bars to reinforce the bodyshell for a more pleasurable and precise drive. Modern cars like the B9 Audi run a pretty stiff bodyshell. Load your car hard in the corners though, and the thin, pressed aluminium factory brace won’t be doing much to prevent chassis flex as the strut towers deflect laterally. The result? Imprecise steering input and a vague, disconnected feeling from the front end. – The RacingLine Body Brace is a stiff, solid billet aluminium replacement which drastically stiffens the front end of the chassis– By reinforcing and tying the front strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads and provides consistent steering response, ensuring a more connected driving experience– Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin– Installation is simple, and is completely reversible– The stunning appearance of the RacingLine Body Brace will finish off your engine bay to the standard the B9 deserves. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR814100

Read more less