Auto Specialists

After being very popular for other ford models, AutoSpecialists are pleased to announce their Bonnet spacer kit for Fiesta Mk7 and 7.5 including ST180 The spacers raise the rear of the bonnet up by 23mm and can be fitted within 30 minutes with special inverted bolts. HOW DO THEY FIT? Lift the bonnet up and put a soft cloth under the bottom corner of the bonnet and then one side at a time remove the 2 x 10mm bolts attaching the bonnet hinge to the bonnet, discard the old bolts and install the billet spacer block and use new inverted bolts to secure. It's that easy! A great low cost way to change the look of your Fiesta and release high under bonnet temperatures for Fast Road or Track use  complete kit 2 x Billet spacers and complete with stainless fixings. 

Read more less

Mirror finish stainless steel, easy fit and comes with stainless fixings. Fits all Petrol & Diesel Fiesta Mk7 Directly Replaces fords mild steel version, with something a little more shiney. Fittings included. x2 stainless washers and x2 stainless nylon nuts. If you wish to have the logo, please message us after ordering otherwise plain will be sent.

Read more less

To fit Black Top Zetec, Mk6, Mk7, Mk8 Fiesta, Mk3 FocusPush ‘n’ twist oil Filler Cap, with Raised Oil Can Logo.Made from solid billet alloy and polished to a mirror finish, this is a complete replacement cap.Please note this replacement cap is not made from stainless steel

Read more less

The Original ford camcover doesn't look great does it? well our new Bolt on design camcover will sort that out nicely. Easy bolt on Design, will finish off your Camshaft cover a treat! Fits All 1.6 Petrol Fiesta Mk7 Zetec models (Except ST) Comes with stainless steel fittings, please choose from plain or logo. Please note, come with full instructions and fittings. Very Basic Mechanical Knowledge needed to fit.

Read more less

  After being very popular for other ford models, AutoSpecialists are pleased to announce their Bonnet spacer kit for Focus Mk2 including RS & ST The spacers raise the rear of the bonnet up by 23mm and can be fitted within 30 minutes with special inverted bolts. HOW DO THEY FIT? Lift the bonnet up and put a soft cloth under the bottom corner of the bonnet and then one side at a time remove the 2 x 10mm bolts attaching the bonnet hinge to the bonnet, discard the old bolts and install the billet spacer block and use new inverted bolts to secure. It's that easy! A great low cost way to change the look of your Focus and release high under bonnet temperatures for Fast Road or Track use -complete kit 2 x Billet spacers and complete with stainless fixings

Read more less

The Original ford camcover doesn't look great does it? well our new Bolt on design camcover will sort that out nicely. Easy bolt on Design, will finish off your Camshaft cover a treat! Fits All 1.25 & 1.4 Petrol Fiesta Mk7 Zetec models Comes with stainless steel fittings, please choose from plain or logo.

Read more less

Focus Mk2 Wing rail covers, fit over existing plastic trims Fits Focus ST Turbo & all Mk2 models from 2008 on-wards Fitting, simply remove black plastic screws with inserts, place new stainless covers on then replace plastic screws & inserts to secure.  Price is per pair

Read more less

Brake reservoir cap cover with information logosGrooved inside so it fits perfectly over original Ford brake reservoir capA must for any show car, or detailed, road car!Please note, this cap is machined from alloy not stainless steel. Fits all Focus Mk2 & Fiesta Mk7 & MK8 (Including STs)

Read more less

Fits Mk2 Focus and Cosworth Aluminium dipstick handle, easy fit Takes about 5 minutes to fit and looks great! Fitting. Cut the top off the original yellow dipstick handle then slide the aluminium handle on and then tighten grub screw located on the side of the stainless handle. Made from quality Aluminium, comes with grub screw securing system

Read more less

ST and RS brake servo pipe cover with stainless fittings Covers up the brake servo pipe that runs above the cam cover at the rear of the engine bay Comes with HOT! logo and arrows pointing to exhaust manifold. Takes about 15 minutes to fit.

Read more less

Focus ST Battery cover top trim with logo, transforms that boring plastic battery cover. This battery top trim fits over original battery cover and is secured by x4 m5 button head allen key bolts  Easy fit, takes 5 minutes to fit. Please note: Now comes with 'FST' logo - NOT 'ST Turbo' logo  

Read more less

Focus ST engine cover centre plate plain or with logo Please note, the logo is a self adhesive transfer which is provided seperatley with the cover. Easy fit takes 5 minutes to fit, simply sticks over existing cover with strong double sided sticky pads provided Please choose from the options list which you would prefer 1.Plain 2.Silver Team with silver ST 3.Silver Team with Red ST Red engine cover not included, just to show how it looks fitted on.

Read more less

Power steering cap cover with Power steering logo Perfectly cnc'd with cog type profile inside for the perfect fit, then polished to a mirror finish To fit Mk4, Mk5, Mk6, Mk7, Mk8 Fiesta, Mk1/2 Focus and Mondeo mk2 puma Now made in Aluminium.

Read more less

Bonnet latch surround with stainless fittings fits all Focus Mk2 including ST models Surround has cut out for bonnet ajar switch Fitting is really simple, remove old bonnet latch bolts fit new stainless latch surround and secure with new stainless bolts provided.

Read more less

AutoSpecialists Design extended wheel arches for the Facelift Focus ST 250 Suitable for the Focus MK3 ST Facelift to fit with standard front bumpers. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Registered Design Right number 6012611

Read more less

Focus ST/RS Turbo Oil filler cap. Only available in a polished finish. Machined to look like the original but better, made from quality alloy and polished to perfection. This is a replacement part not a cover. Fits all 20v turbo engines, RS & ST models

Read more less

Focus ST Turbo and Mk2 focus fuse box cover with logo's Made from top quality 1.6mm stainless steel with laser cut logo's and then expertly polished to mirror finish. This cover fits over existing plastic fuse box lid and is secured by high strength double sided adhesive tape.

Read more less

ST Camshaft cover recess cover with 20v Turbo logo Mirror finish polished Alloy, machined to to fit. Takes seconds to fit and finishes off Camshaft cover a treat!

Read more less

Fits all Petrol & Diesel Mk7 Fiesta's including ST Turbo This cover, covers up black plastic auxilary fuse box cover which is located in the Engine bay. Finished in mirror finish stainless steel and comes with strong self adhesive pads for easy fitting.

Read more less

Currently made to order, please allow 2-3 weeks before dispatch. Due to shipping costs, ALL CUSTOMERS please contact us for a shipping quote before ordering. Clubsport by AutoSpecialists lightweight composite wide arch front wings for the Fiesta Mk7 – will fit all models including ST180 variant. Made from a high-quality, single-skin fibreglass construction, these lightweight panels are designed to directly replace the entire standard front wings and incorporate our AutoSpecialists Design wider exterior wheel arch to allow the fitment of bigger wheels and tyres. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed.  Designed to attach using original Ford mounting points, holes and fixings. Features: High quality direct replacement Huge weight saving and improved performance Approx. 30mm wider each side to allow a larger wheel and tyre Ideal for race and track focused cars   OPTIONAL front arch extension finishing pieces are available Front wings – 750g!

Read more less

Pro-Series Satin Black round washer bottle stopper with washer logo,'o' ring securing system. Grooved inside for pefect fit! Made from solid billet alloy. Totally original finish, anodised satin black alloy and engraved logo which show up in silver

Read more less

Focus ST Turbo Main Air deflector trim - Brightens up the front deflector panel. . New bolt on version, no sticking or bonding, comes with stainless steel fixings. Fits pre-face lift only 2005 up to 2008

Read more less

Focus MK2 water header tank cover HOT logo cap cover available  please choose from options to add to your order This cover has been made to the highest standard and can only be described as THE ULTIMATE WATER HEADER TANK COVER Fitting. Remove water header tank cap and install new stainless cover, your water cap will hold tank cover on but you can use some sealer for extra security.

Read more less

Customers outside of the UK, please contact us for a shipping quote before ordering. Clubsport by AutoSpecialists have designed and released a bolt-in rear cage for the Ford Focus RS/ST Mk2 – NO drilling or cutting required. Constructed from FIA spec E355+N cold drawn seamless steel, aimed at strengthening and tightening the chassis in a simple and effective manner. No need for any additional mounting brackets to be welded in. Will fit 3 door and 5 door models. Registered Design Right number: 6041779

Read more less