Bushes & Inserts

034Motorsport is pleased to present Billet Aluminum MQB Rear Subframe Mount Inserts for the MkVII Volkswagen Golf R & 8V Audi A3/S3 Quattro!MQB Audi/Volkswagen vehicles equipped with Haldex AWD use rubber rear subframe mounts which deflect under load, causing the rear end to feel vague and loose, as well as leading to less-than-optimal suspension geometry and increased understeer. These precision-machined billet aluminum inserts are designed to fill voids in the factory rear subframe mounts, and limit subframe movement without sacrificing ride quality or introducing any perceivable additional noise, vibration, or harshness into the cabin. The result is a more refined, connected driving experience, as well as improved effectiveness of aftermarket rear sway bar upgrades and suspension components.Designed to work in conjunction with the factory rubber mounts, this insert package was engineered using CAD software and thoroughly tested and refined to provide a significant improvement in handling performance and feel.These inserts were tested extensively by 034Motorsport and independent Audi/Volkswagen enthusiasts before release on new MQB chassis AWD vehicles. Installation is very simple, can be performed in under an hour, and is completely reversible.Features: T6-6061 Billet Aluminum Construction CNC-Machined In-House Clear Anodized Finish for Durability Engineered to Fill Voids In Factory Rear Subframe Mounts Helps Maintain Proper Suspension Geometry When Cornering Reduces Rear Subframe Movement During Launches & Acceleration Improves Shifting Feel, Resulting in Crisper Shifts Virtually No Additional NVH Transfer Inside Cabin Easy, Straightforward Installation What's Included: 034Motorsport Billet Aluminum MQB AWD Rear Subframe Insert - Front (Pair) 034Motorsport Billet Aluminum MQB AWD Rear Subframe Insert - Rear (Pair) Installation Instructions: PDF Fitment: Shop By Car/Volkswagen/Passat B8 Shop By Car/Volkswagen/Tiguan (Mk2) Shop By Car/Volkswagen/Arteon Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Volkswagen/Golf Mk7/Engine Mounts Shop By Car/Volkswagen/T-Roc Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Skoda/Superb (3V 2015-) Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 Please Note: The factory rear subframe bolts are torque-to-yield bolts, and we recommend replacing them when installing these inserts. A new set of four OEM bolts is available separately.

Read more less

034Motorsport's Density Line Mounts are the new standard in comfort and performance. Our mounts are redesigned with performance in mind, and manufactured from high-durometer rubber for increased performance and durability, without sacrificing comfort. Density Line Mounts are void-free and fluid-free, eliminating the slop associated with the factory mounts. Street Density: The Street Density Strut Mount is manufactured from 70 durometer rubber, which is approximately 50% stiffer than stock. The rubber is also fully vulcanized to the center cups to increase the lifespan and performance of the mounts significantly. The steel strut mount bodies have also been redesigned to cope with the added stresses of spirited driving. The result is a significant reduction in deflection of the strut mount. These mounts will also eliminate the annoying "squeaking" sound often caused by the stock strut mounts when paired with coilover suspensions. Street Density Strut Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts. Features: Manufactured from 70 Durometer Rubber Rubber Fully Vulcanized to Center Cups Eliminates "Squeaking" Sound Caused by Factory Strut Mounts Reduced Strut Mount Deflection Maintain Proper Suspension Geometry Under Load Improved Steering Feel & Handling Complete Drop-In Replacement of Factory Strut Mounts Priced as a pair Fitment: Shop By Car/SEAT/CUPRA/Toledo Mk3 (5P) Shop By Car/Volkswagen/Polo (AW) Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Coilover Kits Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 Installation Guide: Click Here! Replaces: 5Q0 412 331D  5Q0412331D

Read more less

The 034Motorsport Rear Trailing Arm Spherical Bearing Upgrade Kit is designed to replace the factory rubber bushings, resulting in improved handling, and more predictable and precise cornering. Factory rubber rear trailing arm bushings deflect under load, causing the rear end to feel vague and loose, as well as leading to improper suspension geometry and increased understeer. This becomes especially apparent when cornering on uneven surfaces, where the back of the car can feel floaty or unpredictable. The same exact rubber bushing was used by Audi/Volkswagen on a variety of applications, from the Volkswagen Golf to the Audi RS3, leaving much to be desired by enthusiasts and competitive drivers alike.  This kit replaces the rubber bushings with motorsport-quality Aurora Spherical Bearings, which allow for proper articulation without any deflection, ensuring precise handling, and confidence-inspiring road feel. Unlike polyurethane bushings, spherical bearings allow for full suspension articulation without binding, while completely eliminating slop from bushing flex.  Features: Fully Assembled with New Factory Steel Trailing Arms - Simple Bolt-In Installation! Genuine Aurora Spherical Bearings Featuring Teflon Race Lining Billet Aluminum Bearing Holders - Anodized Black Stainless Steel Bearing Spacers Improved Handling & Road Feel More Precise & Predictable Handling Fully Rebuildable Fitment: Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4 Shop By Car/Volkswagen/Golf Mk7/Control Arms Shop By Car/Audi/A3 (8V 12-20)/Control Arms Shop By Car/Audi/RS3 (8V)/Control Arms Shop By Car/Audi/S3 (8V)/Control Arms Shop By Car/Audi/TT Mk3 (8S)/Control Arms Shop By Car/Audi/TT RS (8S)/Control Arms Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Control Arms Shop By Car/Skoda/Octavia Mk3 (5E)/Control Arms Replaces:  5QM505223  5QM 505 223 5QM505224  5QM 505 224 5Q0505541A  5Q0 505 541 A Installation Instructions: Click Here! Please Note: We recommend getting an alignment to factory specifications after installing the 034Motorsport Rear Trailing Arm Spherical Bearing Upgrade Kit.

Read more less

034Motorsport is proud to offer Street Density Rear Shock Mounts for the MkVII Volkswagen Golf/GTI & 8V Audi A3 FWD! Street Density Rear Shock Mounts for the MkVII Volkswagen Golf/GTI & 8V Audi A3 FWD are engineered for increased performance and durability over the factory rear shock mounts. Featuring 50 Durometer Density Line Rubber, these performance rear shock mounts are able to cope with increased loads from spirited driving and upgraded suspension components. Designed to be a complete, drop-in replacement for the factory rear shock mounts, Street Density Rear Shock Mounts significantly reduce deflection under hard cornering, which helps maintain proper suspension geometry for better handling. In addition, the Density Line Rubber features enhanced bonding to the cast aluminum mount body - reducing the likelihood of separation and dreaded "clunk" associated with the factory mounts. Features: Complete, Drop-In Replacement for Factory Rear Shock Mounts Manufactured with 50 Durometer Rubber High-Quality Cast Aluminum Mount Body Reduced Strut Deflection for Improved Handling Vulcanized Rubber for Increased Longevity Replaces: 5Q0513353G / 5Q0 513 353 G Fitment: (2wd Only) Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes

Read more less

034Motorsport is proud to offer Street Density Rear Shock Mounts for the MkVII Volkswagen Golf R & 8V/8S Audi A3/S3/RS3 & TT/TTS/TTRS! Street Density Rear Shock Mounts for the MkVII Volkswagen Golf R & 8V/8S Audi A3/S3/RS3 & TT/TTS/TTRS are engineered for increased performance and durability over the factory rear shock mounts. Featuring 60 Durometer Density Line Rubber, these performance rear shock mounts are able to cope with increased loads from spirited driving and upgraded suspension components. Designed to be a complete, drop-in replacement for the factory rear shock mounts, Street Density Rear Shock Mounts significantly reduce deflection under hard cornering, which helps maintain proper suspension geometry for better handling. In addition, the Density Line Rubber features enhanced bonding to the cast aluminum mount body - reducing the likelihood of separation and dreaded "clunk" associated with the factory mounts. Features: Complete, Drop-In Replacement for Factory Rear Shock Mounts Manufactured with 60 Durometer Rubber High-Quality Cast Aluminum Mount Body Reduced Strut Deflection for Improved Handling Vulcanized Rubber for Increased Longevity Replaces: 5Q0513353E / 5Q0 513 353 E 8V0513353 / 8V0 513 353 Fitment: (4wd Only) Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes

Read more less

MORE CAMBER, MORE GRIP 034Motorsport's Dynamic+ Camber Mounts are engineered to significantly improve handling performance for MkVII Volkswagen Golf/GTI/Golf R & 8V/8S Audi A3/S3/RS3, TT/TTS/TTRS models. Designed as a true drop-in upgrade, the Dynamic+ Camber Mount Pair provides an additional 1.4 degrees of negative camber at each of the front wheels to improve both turn in and cornering grip. Most importantly, Dynamic+ Camber Mounts provide a fixed camber increase without the cost, noise, and complexity of adjustable camber plates. Dynamic+ Camber Mounts are the ideal solution for enthusiasts in search of enhanced handling performance, confidence-inspiring grip, and precise steering response. Equally well-suited for the street and track, Dynamic+ Camber Mounts deliver a perfect balance of performance, durability, and comfort.   DYNAMIC+ CAMBER MOUNT BENEFITS Revamped Suspension Geometry for Performance Driving Additional 1.4 Degrees of Negative Camber at Each Front Wheel (Compared to Factory Strut Mounts) Significantly Enhanced Grip When Cornering Improved Steering Feel & Handling Response Reduced Strut Mount Deflection to Maintain Proper Strut Alignment Under Cornering Load Significantly Reduced NVH (Noise, Vibration, Harshness) Increase Compared to Spherical Camber Plates Billet Aluminum Construction with Replaceable Density Line Rubber Inner Pucks Learn More   Dynamic+ Camber Mounts are machined from 6061-T6 Aluminum and feature 75 Durometer Density Line Rubber center pucks to minimize strut shaft deflection, while simultaneously preventing unwanted noise, vibration, or harshness (NVH) from being transmitted into the cabin. The Dynamic+ Camber Mount Pair is fully rebuildable, and includes new high-grade strut mount bolts for installation. These mounts will also eliminate the annoying "squeaking" sound often caused by the stock strut mounts when paired with coilover suspensions. Dynamic+ Camber Mounts will only cause a minimal increase in noise, vibration, and harshness (NVH) inside of the cabin. These mounts are a completely re-engineered performance solution, not just inserts for use with the factory mounts. Dynamic+ Camber Mounts were tested extensively on the street and at the track with multiple 034Motorsport Development Vehicles before release to ensure that they deliver excellent performance and durability. FEATURES & FITMENT Features: Complete Drop-In Replacements for Factory Strut Mounts CNC-Machined from 6061-T6 Aluminum with Clear Anodized Finish Proprietary 75 Durometer Rubber Inner Pucks Durable, Rebuildable Design Sold in Pairs - New High-Grade Strut Mount Bolts Included Fitment: Shop By Car/SEAT/CUPRA/Toledo Mk3 (5P) Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes INSTALLATION & WARRANTY Installation Guide: Click Here! Replaces: 5Q0 412 331D  5Q0412331D Warranty: 1 Year Limited Replacement Warranty (If you encounter any issues with our products outside of the warranty period, we will work with you to provide a resolution.)

Read more less

034Motorsport Stainless Steel Subframe Locking Collar Upgrade Kit - MQB Models W/Steel Subframe 034Motorsport is pleased to present the Stainless Steel Subframe Locking Collar Upgrade Kit for the Steel-Subframe MQB Models!Designed to center the subframe using precision-engineered stainless steel insert bushings and large-diameter bolts, this kit eliminates clunks caused by the subframe shifting, and increases chassis rigidity for improved handling performance. This kit addresses subframe clunk/pop/creak which presents itself when taking slow turns, entering driveways, coming to a stop, and starting from a standstill. These locking collars and new factory bolts are a permanent, affordable solution to address the fundamental issue with the factory subframe design. The upper and lower collars in our kit are specifically machined to locate the subframe and bolts perfectly and ensure hassle-free installation. The supplied bolts feature factory-correct tips and thread engagement points to prevent thread stripping. Unlike other kits on the market that use softer alloys, our MQB Subframe Locking Collars are made from stainless steel to prevent deformation and ensure a lifetime of performance. Installation is very straightforward and can be performed in approximately one hour. No permanent modification to the subframe is required, and this upgrade is completely reversible. FEATURES: CNC-Machined Stainless Steel Locking Collars Application-Specific Design for Both Upper & Lower Locking Collars Engineered to Properly Locate (Center) Factory Front Subframe & Eliminate Shifting/Clunks Includes New Factory Subframe Bolts Improves Chassis Rigidity & Handling Performance Addresses Volkswagen Subframe Knocking Noise Permanently! Will Not Cause Additional NVH Transfer Inside Cabin Easy, Straightforward Installation Takes Approximately 1 Hour! WHAT'S INCLUDED: 034Motorsport Stainless Steel Upper Subframe Locking Collars (Set of 4) 034Motorsport Stainless Steel Lower Subframe Locking Collars (Set of 4) Factory Replacement Subframe Bolts (Set of 4) FITMENT: Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Volkswagen/Golf Mk8 Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/A3 (8Y 2020-) Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk4 Shop By Car/Skoda/Octavia Mk4

Read more less

Replace your fixed, stamped steel factory rear toe links on your 8V/8V.5 Audi A3/S3/RS3, MkIII Audi TT/TTS/TTRS or MkVII Volkswagen Golf/GTI/R with this performance engineered adjustable set from 034Motorsport! 034Motorsport's MQB Motorsport Line Adjustable Rear Toe Links facilitate simple and precise toe adjustments, making alignment changes for optimal track performance or even tire wear easier than ever. In addition, Motorsport Line Adjustable Rear Toe Links feature Aurora spherical rod ends for ultimate precision and durability - ensuring that proper suspension geometry is maintained during hard cornering. MQB Motorsport Line Adjustable Rear Toe Links were thoroughly tested on the street and track on 034Motorsport's 8V.5 Audi RS3 Development Vehicle before release. These adjustable toe links are direct replacements for the stock parts, and designed to be fully serviceable and rebuildable. FEATURES: CNC Machined 6061-T6 Aluminum Tie Rod Bodies - Anodized Black for Durability CNC Machined Aluminum Rod End Spacers Aurora Spherical Rod Ends Designed For Easy, Precise, On-Car Adjustability  Direct Drop-In Replacements for Factory Toe Links Sold In Pairs FUNCTIONS: Precise Toe Adjustment Eliminates All Bushing Deflection Improved Handling WHAT'S INCLUDED: 034Motorsport Billet Adjustable Motorsport Rear Toe Link Pair REPLACES: OE Part: 5Q0 501 529C FITS: Shop By Car/Audi/S3 (8V)/Bushes Shop By Car/Volkswagen/Golf Mk7/Bushes Shop By Car/Skoda/Octavia Mk3 (5E)/Bushes Shop By Car/Audi/RS3 (8V)/Bushes Shop By Car/Audi/TT RS (8S)/Bushes Shop By Car/Audi/A3 (8V 12-20)/Bushes Shop By Car/Audi/TT Mk3 (8S)/Bushes Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Bushes Shop By Car/Volkswagen/Golf Mk7/Control Arms Shop By Car/Audi/A3 (8V 12-20)/Control Arms Shop By Car/Audi/RS3 (8V)/Control Arms Shop By Car/Audi/S3 (8V)/Control Arms Shop By Car/Audi/TT Mk3 (8S)/Control Arms Shop By Car/Audi/TT RS (8S)/Control Arms Shop By Car/SEAT/CUPRA/Leon Mk3 (5F)/Control Arms Shop By Car/Skoda/Octavia Mk3 (5E)/Control Arms

Read more less