Bushes & Inserts

OEM strut mounts are known to wear within a very short lifespan, typically associated with annoying squeaks and groans as the vehicle goes over bumps and slow speed turns. The ECS Tuning Heavy Duty Front Strut Mounts are made to last, with an increased durometer and a black E-coating that protects against salt and corrosion. ECS Tuning's Heavy Duty Front Strut Mounts offer a significant performance upgrade to your vehicle's handling and long term durability when compared to stock strut mounts. With the increased durometer over stock, the 75A durometer rubber strut mounts will better resist deflection and premature wear that commonly plagues the OE strut mounts. A must have if you are installing sport springs or coilovers.  Designed in-house by our ECS Engineers and subjected through rigorous real world, on-car testing, and salt spray analysis, we are pleased to offer a high quality performance strut mount for your VW or Audi. This kit includes the front left and right ECS Performance Upper Strut Mounts and are paired with brand new upper strut bearings to ensure you're getting the most out of your new mounts. This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.4 e-tron Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V FWD TDI Audi A3 8V Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII GLI Facelift 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Jetta VII Sedan 1.5T

Read more less

Our ECS Tuning MQB Billet / Polyurethane Dogbone Mount Bushing Insert offers a more engaging driving experience, with crisper throttle response and reduced driveline slop without significant increases to in-cabin NVH*.  The performance subframe mount bushing insert was engineered in-house by our industry leading R&D department, resulting in countless hours of research and testing to establish the best possible design for minimizing driveline deflection while retaining the vehicles everyday driving comfort. ECS Tuning's primary goal was to achieve a comfortable and compliant ride while maximizing performance, and real world test miles put down on multiple vehicles has proven just that. This kit has everything you need for installation including new hardware to replace the torque-to-yield securing bolt installed from the factory, required to be replaced any time they are removed. With the ECS Tuning Dogbone Mount Bushing Insert, power lost through mount deflection is redirected right where you want it, straight to the wheels.   Features include: Reduction in dogbone/subframe mount movement  Increased drivetrain rigidity and response Black anodized 6061-T6 aluminum mounting plate for durability and corrosion resistance ​90A durometer polyurethane bushing insert features upper subframe bushing engagement, which was specifically engineered to keep loading along the axis of the pendulum arm mount. Our unique design maintains low levels of NVH* and accommodates fitment of both Version 1 and Version 2 subframe bushings. Long-term tested on multiple vehicles for real-world qualification Includes hardware to replace the factory torque-to-yield bolts for the pendulum mount and subframe bushing insert  Proudly engineered in-house and made in America!   Being a relatively simple process, if you're mechanically inclined you should have no problem installing the mount in your own garage in under 30 minutes. For assistance with installation, please see our in-depth installation PDF available under the Installation tab. This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.4 e-tron Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V FWD TDI Audi A3 8V Quattro 2.0T Audi MK3 TT (2014+) Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII All 2.0T Gen3 Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Golf VIII FWD 2.0T Evo4 Volkswagen Golf VIII R 4Motion 2.0T Evo4 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII GLI Facelift 2.0T Gen3 * DSG/Automatic transmission models may experience more NVH than manual transmissions.

Read more less

The ECS Heavy Duty Rear Shock Mount offers significant performance to your vehicle's handling and long term durability as compared to stock shock mounts. With the increased durometer over the squishy, foam, OEM 50A durometer shock mounts, the ECS void-free 75A durometer rubber shock mounts will better resist deflection and premature wear that commonly plague the OE mounts without sacrificing ride comfort. This is a must have if you are installing sport springs, coilovers or when replacing rear shocks. OEM shock mounts are known to wear within 100k miles, typically associated with annoying pops and rattles as the vehicle goes over bumps and uneven terrain. The ECS Heavy Duty Rear Shock Mounts are made to last, with their higher durometer over stock and precision to OE tolerances.   PART DESIGN 75A durometer solid rubber bushing assembled with precisely controlled preload for superior durability and resistance to axial forces which cause the OE units to fail OE style cast aluminum housing with a black E-Coat to ensure all surfaces are covered Quiet, long-lasting, dependable operation   The ECS Heavy Duty Rubber Rear Shock Mount Kit includes the following: ECS Heavy Duty Rubber Rear Shock Mounts - QTY 2 Shock Mount Dust Caps - QTY 2 Lower Shock Mounting Bolts - QTY 2 This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Arteon 4Motion 2.0T Evo4 Volkswagen Arteon 4Motion 2.0T Gen3 Volkswagen Arteon FWD 2.0T Evo4 Volkswagen Arteon FWD 2.0T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII All 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII GLI Facelift 2.0T Gen3

Read more less

Are you installing new suspension on your vehicle? If so, don’t let them get the best of you, pick up this new ECS Complete Cup Kit/Coilover Install Kit and make the job easier than ever. This new kit includes two upper strut bearings, two Heavy Duty ECS upper front strut mounts, two ECS HD upper rear shock mounts and all the mounting hardware needed for installation. Getting this means no need to use a spring compressor to retrieve your old hardware to install your new suspension. On top of that, it also leaves your old suspension fully assembled so that it may be quickly swapped back onto the vehicle if needed, that way, you can take your coilovers with you when it comes time to sell your vehicle.   Kit includes : [FRONT] (2) ECS Heavy Duty Front Strut Mounts (2) Front Upper Strut Bearings (2) Front Upper Strut Nuts (6) Front Upper Strut mount Bolts (2) Front Axle Bolts (2) Front Strut Pinch Bolts (2) Front Strut Pinch Bolt Nuts (2) Front Sway Bar End Link Nuts (6) Ball Joint Nuts [REAR] (2) ECS Heavy Duty Rear Shock Mounts (2) Rear Shock Upper Mounting Nuts (2) Rear Shock Upper Mount Dust Caps (4) Rear Shock Upper Mounting Bolts (2) Rear Shock Lower Mounting Bolts (2) Rear Shock Lower Mounting Nuts (2) Rear Sway Bar End Link Mounting Bolts (2) Rear Sway Bar End Link Mounting Nuts This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII All 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3

Read more less