ECS Tuning

This polyester tow strap is far and above the best tow strap available for the Volkswagen chassis. ECS Tuning uses a heavy-duty, chemical-resistant polyester strap webbed around a stainless steel stud. There is plenty of length available for tow hooks to grab onto without hitting your bumper and damaging paint or causing cracks. This tow strap installs into the factory tow hook location in the front or rear bumper support.  A tow strap is a better pickup point than a fixed steel ring, which will add weight and protrude past the bumper. Some racing series have banned the steel rings because they increase the likelihood of contact during close racing. Our straps are sold in bright red, black or VW's famous MK7 plaid (red suggested for racing use as it makes it easy for tow truck operators and safety crews to spot).  Key Features:  303 stainless steel construction Machined flats to tighten the hook down with a wrench Lab tested to a break strength of 4,000 lbs.  Box stitched strap for strength Threads into factory tow hook locations Designed to be SCCA and NASA compliant for racing Black, Flame Red or MK7 Plaid strap color options Proudly engineered in-house and made in America! *Proper recovery and safety techniques should always be followed.  Never exceed the manufacturers recommended factory tow hook weight limit - not rated for aggressive recovery techniques or situations.  Previous Revisions 025265ECS01-07 Cross Reference tow hook, recovery This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your driving experience and interior appearance all at once with ECS Tuning!  Our in-house designed and engineered Paddle Shifters provide you with a much larger contact area for activation of the upshift and downshift paddles, meaning you're no longer confined to holding the steering wheel at a precise location when utilizing your paddle shifters   PART DESIGN Designed in-house using 3D laser scanning and CAD technology for precision fitment Inspired by OEM interior surfaces and contours for seamless integration into the interior Features -/+ symbol decals adhered under the clear coat, to resemble the OEM shift paddle Two-piece construction comes pre-assembled for ease-of installation Replaces factory plastic paddle, making for a crisp and concise feel Recessed finger grip area along entire back edge of paddle for enhanced grip ECS carbon fiber products are made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured Clear coated for excellent finish durability and UV resistance   PERFORMANCE FEATURES Paddle shifter extends along circumference of steering wheel and provides additional area for up/down shifting for greater working range while cornering  Maintains positive driving position by limiting “reach” to upshift/downshift   PRODUCT DEVELOPMENT Our ECS Paddle Shifters were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts in detail! See our Installation PDF under the INSTALLATION Tab for more information. Cross Reference flappy paddle, shift paddle, DSG, Tiptronic This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VII GLI 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum and Type II black anodized for appearance and corrosion resistance.  This cap is not only designed to look great, featuring a post-machined universal "brake fluid" symbol, but fit and function just like the factory part with improved ergonomics.  The interior is designed to retain the OE gasket, simply transfer the gasket from your OEM cap to our ECS Billet Cap. Every detail was thought out, even the custom designed threads that maintain OEM ventilation functionality!  Proudly designed, engineered and made in the U.S.A!   Replaces OE# 5Q0611349A This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8S TTRS Quattro 2.5T Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.4 e-tron Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V FWD TDI Audi A3 8V Quattro 2.0T Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 A5 Quattro 2.0T Audi B9 A5 Quattro 2.0T Sportback Audi B9 Q5 Quattro 2.0T Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Tiguan MQB 4Motion 2.0T Gen3 Volkswagen Tiguan MQB FWD 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum and Type II black anodized for appearance and corrosion resistance.  This cap is not only designed to look great, featuring a post-machined universal "brake fluid" symbol, but fit and function just like the factory part with improved ergonomics.  The interior is designed to retain the OE gasket, simply transfer the gasket from your OEM cap to our ECS Billet Cap. Every detail was thought out, even the custom designed threads that maintain OEM ventilation functionality!  Proudly designed, engineered and made in the U.S.A!   Replaces OE# 5Q0611349A This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8S TTRS Quattro 2.5T Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.4 e-tron Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V FWD TDI Audi A3 8V Quattro 2.0T Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 A5 Quattro 2.0T Audi B9 A5 Quattro 2.0T Sportback Audi B9 Q5 Quattro 2.0T Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Tiguan MQB 4Motion 2.0T Gen3 Volkswagen Tiguan MQB FWD 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Enhance the intake system on your 2015+ Volkswagen GTI or Golf R to its fullest potential with our ECS Tuning Performance Air Inlet Scoops! Strategically placed within the grille, these help to grab and direct ambient air right into your aftermarket or modified OEM intake system's opening.  The factory grille leaves provisions that allow intake air into the inlet duct on the passenger side but leaves out a direct flow-path to the air inlet on the driver's side. From aftermarket dual air intake ducts to DIY'ers modifying their OEM grille to allow for a more direct route on the driver's side, our Product Development Team saw an opportunity to serve the aftermarket with a clean, OEM-type solution that not only provides for a cleaner install, but directs cool outside air directly into the air intake passage(s). To help you achieve the best results during installation each kit includes an adhesive-backed vinyl trim template for both left and right side positions that align to OEM features on the grille. Once in place, the scoop opening can then be easily cut open with a Dremel or hack saw/drill combo.    PART DESIGN The ECS Inlet Scoops are designed to work with OEM honeycomb and slant/bar style grilles on MK7 / MK7.5 GTI, Golf R and Alltrack models Manufactured from laser cut and CNC-bent 5052 sheet aluminum  Trim Plates are designed to replicate the OEM Honeycomb design and are fine wrinkle black powdercoated to match OEM-textured surfaces  Inlet Scoops are available in either fine wrinkle black or fine wrinkle red powdercoated finishes and available in either left-side, right-side, or combined locations   KIT CONTENTS Upper Trim Plate (Fine Wrinkle Black Honeycomb design)  Performance Inlet Scoop Kit  Pre-Installed ECS Tuning "Luft-Technik" Logo Plate with aluminum rivets  Pre-Installed Stainless steel press fit nuts  Stainless steel mounting bolts and washers  Trim Templates - Left & Right (Driver's and Passenger's Side)   PERFORMANCE FEATURES Maximizes the performance benefits of dual inlet intake systems by directing cold air coming through the grille up into the duct on both sides   PRODUCT DEVELOPMENT Our ECS Performance Inlet Scoop Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT MK7 GTI, Golf R, Alltrack and MK7.5 Golf R customers: Installation requires trimming and drilling of your factory grille to allow for intended use. MK7.5 Customers: Installation requires drilling and optional trimming of your factory grille to allow for intended use. We put together a full installation tutorial from start to finish including how to trim the inlet opening in detail! See our Installation PDF under the INSTALLATION Tab for more information. Due to confined space these are NOT compatible with our ECS Tuning Supertone Horn Kit.  Previous Revisions 022155ECS01-01 022155ECS01-03 022155ecs01-01KT 022155ECS01-02KT 022155ECS02-01KT 022155ECS02-02KT Cross Reference ram air This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Why just replace your commonly worn, peeling, or otherwise failed start/stop button, when you could upgrade with a reliable, "red" starter switch from the helpful folks at ECS Tuning? Using an OEM start/stop switch from a Genuine OEM source, the Research and Development Team at ECS Tuning were able to adapt this starter switch to your VW. Conveniently packaged and ready for install out of the box without any additional modifications or coding required. Simply replace and enjoy the newfound décor and quality.    FEATURES: Genuine OEM sourced  Modified in-house for VW MK7 / MK7.5 specific fitment In-house tested and validated to function on MK7 models with factory start/stop ignition switch Illuminated just like the factory silver starter switch  Direct replacement; no modifications or coding required   *Please note* You may notice a slight "ledge" on the driver's side edge of the push button hole opening.  This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

If you're looking for an easy, inexpensive way to enhance your underhood appearance or if your engine bay could use a touch of premium carbon fiber then we have you COVERED! Our ECS Tuning in-house designed and engineered Carbon Fiber Expansion Tank Cover Kit features precision 3D designed, gloss clear-coated carbon fiber overlays that simply lay over top of your OEM expansion tank and enhances the underhood appeal while covering up the ugly, grey plastic coolant tank. Our precisely modeled 2-piece overlays feature a smooth, appealing exterior design with provisions machined for clearance on OE features such as coolant hose connections and the coolant level sensor. Pre-applied high-temperature automotive-grade 3M foam tape ensures the parts stay in position while creating a great seal between the upper and lower covers.    PART DESIGN Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Made from lightweight, hand-laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured. Clear coated for excellent finish durability and UV resistance.  Hides the ugly, grey plastic expansion tank  Pre-applied foam tape creates a lasting connection to the expansion tank while creating a seal between the upper/lower covers. 3M foam tape is resistant to the continuous heat in the engine bay and is resistant to chemical degradation.  Lug features on the upper overlay covers the expansion tank vent and create a unique stylistic design  Incorporated sight-window allows visibility of coolant level with both covers installed  Expansion tank mounting bolts remain accessible, allowing removal of expansion tank while keeping the covers in place  Compatible with the following expansion tank caps: OEM, Audi R8, Porsche 991 and Gen3 "B"     PRODUCT DEVELOPMENT Our ECS Carbon Fiber Expansion Tank Cover Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Ensure your OEM expansion tank is clean and free of debris prior to installing self-adhesive foam strips. We recommend wiping the contact surfaces with isopropyl alcohol prior to installation. Reference our General Installation Guide for tips and suggestions.    NOTE: This part is for QTY 2 covers (upper and lower). All other items shown are for media reference only. This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Audi A3 8V FWD TDI Audi MK3 TT (2014+) Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Atlas 4Motion 2.0T Gen3 Volkswagen Atlas FWD 2.0T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Tiguan MQB 4Motion 2.0T Gen3 Volkswagen Tiguan MQB FWD 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Our ECS Tuning Textured Black Engine Cover transforms the engine bay in your VW/Audi MQB Gen3 vehicle with sharp styling, covering what needs covered and leaving the rest to the already-great appearance of the engine bay. Our design features incorporate the factory intake manifold design elements, while covering the unsightly, plastic parts that are often difficult to keep clean. Oil changes and between service top-offs can be completed with the engine cover in place as we designed ample clearance for the oil filter housing, dipstick and oil fill cap. Exposed ignition cutouts allow for visibility of upgraded coil packs. Finally a decorative aluminum logo plate completes the design.    PART DESIGN Designed and engineered in-house using FARO laser scanning for reverse engineering and SolidWorks 3D CAD modeling for precision fitment  Made from a high temperature engineered thermoplastic to withstand extreme engine bay temperatures  OE-type textured matte black material specifically chosen to match OEM underhood components for OE+ appearance  A brushed aluminum logo plate, featuring a screen-printed ECS Tuning logo, is pre-installed onto the engine cover using stainless hardware and high temperature 3M adhesive for timeless appeal and décor  Pre-installed billet aluminum mounting posts bolt on to the engine cover to avoid potential bonding adhesive failure at high temperatures Further design considerations were strategically made such as clearance for "most" aftermarket intake systems and ECS catch can hoses   KIT CONTENTS MQB Gen3 Textured Black Engine Cover - With pre-installed mounting posts & grommets and ECS logo plate  2 Ball Stud Mounting Posts (secure the engine cover to the intake manifold)    PRODUCT DEVELOPMENT Our ECS MQB Gen3 Textured Black Engine Cover was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT The included ball studs thread quickly into the unused OE plastic intake manifold bosses. From there the pre-installed engine cover mounting grommets snap right over the ball studs. The ECS Engine Cover can then be installed or removed just like the factory cover without any further tools needed.  * While removing the engine cover, please pull from the underside mounting post area during removal to avoid any potential damage.  ** Other brand underhood parts may or may not fit with our engine cover such as oil catch can systems, oil filter housings, blow off and diverter valves (including spacers), boost taps, etc.   *Upgraded ignition coil ground strap / securing nuts are available separately to further enhance the underhood appearance: Engine Cover Hardware Set Upgrade - Chrome Acorn Nuts - ES3194182 Engine Cover Hardware Set Upgrade - Spiked Polished Nuts - ES3194183 This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Protection of your undercarriage and oil pan is vital. Between giant potholes, speed bumps and bumpy terrain your vehicle is exposed to a variety of impacts that can ruin your oil pan or other critical components. Protect your vitals with our ECS Tuning in-house design and engineered Street Shield Aluminum Skid Plate Kit. Constructed from strong and sturdy 5052 lightweight aluminum, our skid plate is sure to stand up to harsh road conditions that your OEM plastic belly pan could not. This plate is laser cut for a perfect fit and includes all new mounting hardware for the perfect finish.  We have incorporated an oil drain plug door so you don't have to remove the skid plate for an oil change.  It is designed to sit flush with the rest of the skid plate so there is nothing hanging down to catch on any road debris.  Engineered and manufactured in the USA, you can expect nothing but the best performance and longevity with our superior Aluminum Street Shield Skid Plate Kit from ECS Tuning! Be sure to check out our PDF attached below for complete installation instructions. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 SQ5 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Flimsy, broken and mangled OEM plastic battery covers can leave your engine bay looking a little out of date and in need of repair. If your battery cover is in need of replacement or if your engine bay could use a touch of beauty then we have you COVERED! Our ECS Tuning in-house designed and engineered Battery Cover kit includes a precision 3D designed heat resistant, textured matte black polymer battery lid with a durable CNC-bent powder-coated aluminum battery case.    PART DESIGN BATTERY LID Made from heat resistant, textured matte black polymer; special attention paid to the heat found in the engine bay throughout product testing, in addition to OE-type textured material to match OEM underhood components.  Stepped edge allows for secure fitment to the battery case quick latches  Further design characteristics such as the raised center lid add styling aspects that looks great in any engine bay BATTERY CASE CNC-bent from heavy duty 5052 aluminum for precise fitment and durability  Powder-coated in a tough wrinkle black finish for a sleek and OEM-type finish  Pre-installed "Quick Latches" make installation and serviceability of the battery lid quick and easy  Laser cut mounting tabs engage the OEM battery tray with precision, locking the case into position for rigid mounting  Pre-installed neoprene rubber edge trim outlines the positive battery cable pass-through for abrasion protection and a clean, finished appearance    PRODUCT DEVELOPMENT Our ECS Tuning Battery Cover Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing. This Part Fits the Following Vehicles Make Model Submodel Engine Audi A3 8P FWD 2.0T Audi A3 8P Quattro 2.0T Audi A3 8P FWD TDI Volkswagen Beetle All 2.0T Volkswagen Beetle All 2.5L Volkswagen Beetle All TDI Volkswagen CC FWD 2.0T Volkswagen EOS All 2.0T Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sedan Facelift 1.4T Volkswagen Jetta VI Sedan 1.4T Hybrid Volkswagen Jetta VI Sedan Facelift 1.4T Hybrid Volkswagen Jetta VI Sedan 1.8T Gen3 Volkswagen Jetta VI Sedan Facelift 1.8T Gen3 Volkswagen Jetta VI Sedan 2.0 Volkswagen Jetta VI Sedan Facelift 2.0L Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sedan 2.0T Gen3 GLI Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VI Sedan 2.5 Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sedan GLI Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B7 All 2.5L Volkswagen Passat B7 All TDI Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Boring, torn and deteriorating cloth battery covers can leave your engine bay looking a little outdated and in need of something more. If your battery cover is in need of replacement or if your engine bay could use a touch of beauty then we have you COVERED! Our ECS Tuning in-house designed and engineered Battery Cover kit includes a precision 3D designed heat resistant, textured matte black polymer battery lid with a durable CNC-bent powder-coated aluminum battery case.    PART DESIGN BATTERY LID Made from heat resistant, textured matte black polymer; special attention paid to the heat found in the engine bay throughout product testing, in addition to OE-type textured material to match OEM underhood components.  Stepped edge allows for secure fitment to the battery case quick latches  Further design characteristics such as the raised center lid add styling aspects that looks great in any engine bay BATTERY CASE CNC-bent from heavy duty 5052 aluminum for precise fitment and durability  Powder-coated in a tough wrinkle black finish for a sleek and OEM-type finish  Pre-installed "Quick Latches" make installation and serviceability of the battery lid quick and easy  Laser cut mounting tabs engage the OEM battery tray with precision, locking the case into position for rigid mounting  Pre-installed neoprene rubber edge trim outlines the positive battery cable pass-through for abrasion protection and a clean, finished appearance    PRODUCT DEVELOPMENT Our ECS Tuning Battery Cover Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.4 e-tron Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V FWD TDI Audi A3 8V Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Looking to spice up your interior? Our ECS Tuning Carbon Fiber Steering Wheel Hub Overlay drastically improves your interior with race-inspired carbon fiber material! Our in-house designed and engineered overlay covers the trim on the steering hub, from the switches to the lower emblem and remains in place with automotive-grade 3M tape. Installation is accomplished within minutes and does NOT require removal of the airbag.    PART DESIGN Made from lightweight, hand-laid carbon fiber material with pre-impregnated 2x2 twill weave carbon fiber cloth and epoxy resin, then autoclave cured and finished in a durable gloss clear coat for UV and heat protection for continuous operating temperatures of up to 300° F. 3D laser scanned OEM steering wheel to ensure optimal fitment Designed to cover the trim on steering hub for optimal coverage  Emblem cutout to display "GTI", "R" or "GLI" logo  Pre-installed automotive 3M double-sided adhesive to make installation a breeze Minimal carbon fiber material thickness to offer the least amount of intrusion.   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Steering Wheel Hub Overlay was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish. See our Installation PDF under the INSTALLATION Tab for more information. Please note, airbag removal is NOT required! This simply slides around the airbag cover.  We recommend cleaning the steering hub with isopropyl alcohol prior to installation. 1 packet - ES2918127  Please be advised that this part is a hand-trimmed, carbon overlay. Details of product fitment can be observed in our installation photography. This part will rest above the steering wheel hub and some discernable rise off of the hub may be observed.  This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VII GLI 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum and Type II anodized for appearance and corrosion resistance.  This cap is not only designed to look great, but fit and function just like the factory part with improved ergonomics.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi 100 FWD V6 Audi 100 Quattro V6 Audi 4M Q7 Quattro 2.0T Audi 4M Q7 Quattro 3.0T Audi 4M Q8 Quattro 3.0T Audi 8S TTRS Quattro 2.5T Audi 8U Q3 FWD 2.0T Audi 8U Q3 Quattro 2.0T Audi 8V S3 Quattro 2.0T Audi A3 8P FWD 2.0T Audi A3 8P FWD TDI Audi A3 8P Quattro 2.0T Audi A3 8P Quattro 3.2L Audi A3 8P Quattro V6 3.2L Audi A3 8V FWD 1.4 e-tron Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V FWD TDI Audi A3 8V Quattro 2.0T Audi A7 C7 3.0 TDI Audi A7 C7 3.0T Audi B5 A4 FWD 1.8T Audi B5 A4 FWD V6 12v Audi B5 A4 FWD V6 30v Audi B5 A4 Quattro 1.8T Audi B5 A4 Quattro V6 12v Audi B5 A4 Quattro V6 30v Audi B5 S4 All 2.7T Audi B6 A4 FWD 1.8T Audi B6 A4 FWD V6 30v Audi B6 A4 Quattro 1.8T Audi B6 A4 Quattro V6 30v Audi B6 S4 All V8 Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi B7 A4 Quattro V6 3.2L Audi B7 RS4 All V8 Audi B7 S4 All V8 Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 Allroad Quattro 2.0T Audi B8 RS5 All 4.2L Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi B8 SQ5 Quattro 3.0T Audi C4 A6 FWD 2.8 Audi C4 A6 Quattro 2.8 Audi C4 S4 Quattro 20v T Audi C4 S6 Quattro 20v T Audi C5 A6 FWD V6 2.8L Audi C5 A6 FWD V6 3.0L Audi C5 A6 Quattro 2.7T Audi C5 A6 Quattro 4.2 Audi C5 A6 Quattro V6 2.8L Audi C5 A6 Quattro V6 3.0L Audi C5 Allroad Quattro 2.7T Audi C5 Allroad Quattro 4.2L Audi C5 S6 Quattro 4.2 Audi C6 A6 FWD V6 3.2L Audi C6 A6 Quattro V6 3.2L Audi C6 A6 Quattro V8 4.2L Audi C6 S6 All V10 5.2L Audi C7 A6 FWD 2.0T Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro 2.0T Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 Quattro V6 3.0T Audi C7 S6 Quattro 4.0T Audi C7 S7 Quattro 4.0T Audi D2 A8 FWD 3.7 Audi D2 A8 Quattro 4.2 Audi D2 S8 Quattro D2 4.2L Audi D3 A8 Quattro 4.2 Audi D3 A8 Quattro W12 Audi D3 S8 Quattro D3 V10 Audi MK3 TT (2014+) Quattro 2.0T Audi Q5 Quattro 2.0T Audi Q5 Quattro 3.0 TDI Audi Q5 Quattro 3.0T Audi Q5 Quattro 3.2L Audi Q7 All 3.0T Audi Q7 All TDI Audi Q7 All V6 Audi Q7 All V8 Audi RS3 8V (2018+) 2.5T Audi RS7 Quattro 4.0T Audi TTS MK3 (2014+) 2.0T Volkswagen 337/20AE All 1.8T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Arteon 4Motion 2.0T Gen3 Volkswagen Arteon FWD 2.0T Gen3 Volkswagen Atlas 4Motion 2.0T Gen3 Volkswagen Atlas 4Motion 3.6L V6 Volkswagen Atlas FWD 2.0T Gen3 Volkswagen Atlas FWD 3.6L V6 Volkswagen Beetle All 1.8T Gen3 Volkswagen Beetle All 2.0T Volkswagen Beetle All 2.0T Gen3 Volkswagen Beetle All 2.5L Volkswagen Beetle All TDI Volkswagen CC 4Motion VR6 Volkswagen CC FWD 2.0T Volkswagen CC FWD VR6 Volkswagen Corrado All G60 Volkswagen Corrado All VR6 12v Volkswagen EOS All 2.0T Volkswagen EOS All 3.2L Volkswagen Eurovan T4 All 5cl Diesel Volkswagen Eurovan T4 All 5cyl Volkswagen Eurovan T4 All VR6 Volkswagen Eurovan T4 All VR6 12v Volkswagen Eurovan T4 All VR6 24v Volkswagen Golf IV All 1.8T Volkswagen Golf IV All 2.0 Volkswagen Golf IV All TDI Volkswagen Golf IV All VR6 12v Volkswagen Golf IV All VR6 24v Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta IV All 1.8T Volkswagen Jetta IV All 16v Volkswagen Jetta IV All 2.0 Volkswagen Jetta IV All TDI Volkswagen Jetta IV All VR6 12v Volkswagen Jetta IV All VR6 24v Volkswagen Jetta IV Wagon All Volkswagen Jetta IV GLI All 1.8T Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sedan 1.4T Hybrid Volkswagen Jetta VI Sedan 1.8T Gen3 Volkswagen Jetta VI Sedan 2.0 Volkswagen Jetta VI Sedan 2.0T Gen3 GLI Volkswagen Jetta VI Sedan 2.5 Volkswagen Jetta VI Sedan GLI Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift 1.4T Volkswagen Jetta VI Sedan Facelift 1.4T Hybrid Volkswagen Jetta VI Sedan Facelift 1.8T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0L Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen New Beetle All 1.8T Volkswagen New Beetle All 16v Volkswagen New Beetle All 2.0 Volkswagen New Beetle All 2.5L Volkswagen New Beetle All TDI Volkswagen Passat B3 All 16v Volkswagen Passat B3 All VR6 12v Volkswagen Passat B4 All 2.0 Volkswagen Passat B4 All TDI Volkswagen Passat B4 All VR6 12v Volkswagen Passat B5 4 Motion 1.8T Volkswagen Passat B5 4 Motion V6 30v Volkswagen Passat B5 4 Motion W8 Volkswagen Passat B5 FWD 1.8T Volkswagen Passat B5 FWD TDI Volkswagen Passat B5 FWD V6 30v Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen Passat B7 FWD 1.8T Gen3 Volkswagen Passat B7 FWD 2.0T Gen3 Volkswagen Phaeton 4 Motion V8 Volkswagen Phaeton 4 Motion W12 Volkswagen R32 MKIV All 3.2 Volkswagen R32 MKV All 3.2 Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T Volkswagen Tiguan MQB 4Motion 2.0T Gen3 Volkswagen Tiguan MQB FWD 2.0T Gen3 Volkswagen Touareg 1 All TDI Volkswagen Touareg 1 All V6 Volkswagen Touareg 1 All V8 Volkswagen Touareg 2 All TDI Volkswagen Touareg 2 All V10 TDI Volkswagen Touareg 2 All V6 Volkswagen Touareg 2 All V6 TDI Volkswagen Touareg 2 All V8 Volkswagen Touareg 3 Hybrid All *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum and Type II anodized for appearance and corrosion resistance.  This cap is not only designed to look great, but fit and function just like the factory part with improved ergonomics.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8U Q3 FWD 2.0T Audi 8U Q3 Quattro 2.0T Audi A3 8P FWD 2.0T Audi A3 8P Quattro 2.0T Audi A3 8P FWD TDI Audi A7 C7 3.0 TDI Audi B6 A4 FWD V6 30v Audi B6 A4 Quattro V6 30v Audi B6 S4 All V8 Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi B7 A4 Quattro V6 3.2L Audi B7 RS4 All V8 Audi B7 S4 All V8 Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T Audi C5 A6 FWD V6 3.0L Audi C5 A6 Quattro V6 3.0L Audi C5 A6 All V6 30v Audi C5 Allroad Quattro 4.2L Audi C6 A6 All 4.2 Audi C6 A6 All V6 3.0T Audi C6 A6 FWD V6 3.2L Audi C6 A6 Quattro V6 3.2L Audi C6 A6 Quattro V8 4.2L Audi C7 A6 FWD 2.0T Audi C7 A6 Quattro 2.0T Audi C7 A6 Quattro 3.0 TDI Audi D3 A8 Quattro 4.2 Audi Q5 Quattro 2.0T Audi Q5 Quattro 3.0T Audi TT MKII Quattro 2.0T Audi TTS MK2 (2006-2013) 2.0T Audi TTS MK2 (2006-2013) 2.0T Volkswagen Beetle All 2.0T Volkswagen Beetle All TDI Volkswagen CC FWD 2.0T Volkswagen EOS All 2.0T Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf VI All 2.0T Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B7 All TDI Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T Volkswagen Touareg 1 All V8 Volkswagen Touareg 2 All V8 Volkswagen Touareg 3 All V6 TDI *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The ECS Tuning Textured Fuse Box / ECU Cover adds unique, affordable styling to the underhood of your MQB platform vehicle without any permanent modifications. Easily installs with our  conveniently pre-applied 3M tape to the underside of the cover. It's unique styling not only covers the black plastic fuse box lid, but it also has a wing that extends over the unsightly ECU clamshell bracket to further enhance engine bay styling.    PART DESIGN Our in-house engineering team was tasked with making our cover fit perfectly atop the fuse box lid and to also cover the ugly ECU clamshell bracket. It's design perfectly works with both standard AND lock-box cover ECU's.  It also retains the quick disengagement feature of locking clips for easy removal and installation to service the fuses underneath.  The included plastic-purpose 3M tape is properly selected for the harsh goings within the engine-bay environment and easily sticks on to the fuse box lid with relative ease once cleaned and dried.  Manufactured from a specific resin with a heat additive to stand up to temperatures in excess of 300°F.    PRODUCT DEVELOPMENT Our ECS Textured Fuse Box / ECU Cover was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Remove the fuse box lid, clean the surface with isopropyl alcohol, peel the tape and press firmly to stick the 3M tape to the surface. *2 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.* This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Audi MK3 TT (2014+) Quattro 2.0T Audi RS3 8V (2018+) 2.5T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Atlas 4Motion 2.0T Gen3 Volkswagen Atlas 4Motion 3.6L V6 Volkswagen Atlas FWD 2.0T Gen3 Volkswagen Atlas FWD 3.6L V6 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum and Type II anodized for appearance and corrosion resistance.  This cap is not only designed to look great, but fit and function just like the factory part with improved ergonomics.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum and Type II anodized for appearance and corrosion resistance.  This cap is not only designed to look great, but fit and function just like the factory part with improved ergonomics.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum.  This cap is not only designed to look great, but fit and function just like the factory part with improved ergonomics.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 A5 Quattro 2.0T Audi B9 A5 Quattro 2.0T Sportback Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

If you're looking for an easy, inexpensive way to enhance your underhood appearance or if your engine bay could use a touch of premium carbon fiber then we have you COVERED! Our ECS Tuning in-house designed and engineered Carbon Fiber Fuse Box Cover features a precision 3D designed gloss clear-coated carbon fiber overlay that simply lays over top your OEM fuse box lid and enhances the underhood appeal. Our precisely modeled overlay features sleek lines and edges for that ultra-smooth look. Our design eliminates the awkward edge found on the outer, front edge of the OEM fuse box lid and creates a smooth, attractive flat surface. Trapped dirt on the upper surface is now a thing of the past with our cover, keeping your engine bay tidier and easier to clean.  In addition to our design elements, there is no concern of water or other environmental impacts on your critical electrical components as our fuse box overlay simply works in harmony with the OEM fuse box lid to simply add to the cosmetic appeal with beautiful gloss carbon fiber material. Furthermore, the factory release latches remain fully functional allowing for uninterrupted serviceability of the fuse box cover if access is ever needed.  The carbon fiber overlay is made from 2x2 twill weave that is gloss clear coated for UV and heat protection and to seal against environmental impact for prolonged durability. The included foam tape makes installation a breeze. Simply peel and stick the foam pads to your OEM fuse box cover to the areas shown in our installed photos and then stick on our carbon fiber overlay. No need to worry about the tape's integrity as it's rated for up to 200° F.  and made from strong adhesive backing with polyurethane foam material.  Easy to install, easy to style, get your ECS Carbon Fiber Fuse Box Overlay Kit today!   Be sure to check out our other ECS Tuning Carbon Fiber Underhood Products for your vehicle: 1. Carbon Fiber Engine Cover - 2.0T TSI - ES2804425 2. Carbon Fiber Intake Systems (MK6 GTI / Jetta GLII) ES2979256 (Carbon Tube/Carbon Box) ES2966359 (Carbon Tube/Aluminum Heat Shield) ES2863350 (Wrinkle Black Aluminum Tube/Carbon Box) ES2863351 (Polished Aluminum Tube/Carbon Box) 3. Carbon Fiber Oil Filter Cover - 2.0T TSI - ES3200158 4. Carbon Fiber Battery Cover Kit - ES3187910   **Installation Note: Ensure your OEM fuse box lid is clean and free of debris prior to installing self-adhesive foam strips. Reference our installation photos for foam strip installation locations.  This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8J TTRS Quattro 2.5T Audi A3 8P FWD 2.0T Audi A3 8P Quattro 2.0T Audi TT MKII FWD 2.0T Audi TT MKII Quattro 2.0T Audi TT MKII TTS 2.0T Audi TT MKII Quattro 3.2L Audi TTS MK2 (2006-2013) 2.0T Audi TTS MK3 (2014+) 2.0T Volkswagen CC 4Motion VR6 Volkswagen CC FWD 2.0T Volkswagen CC FWD VR6 Volkswagen EOS All 2.0T Volkswagen EOS All 3.2L Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen R32 MKV All 3.2 Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details If you're looking for an easy, inexpensive way to enhance your underhood appearance or if your engine bay could use a touch of premium carbon fiber then we have you COVERED! Our ECS Tuning in-house designed and engineered Carbon Fiber Expansion Tank Cover Kit features precision 3D designed, gloss clear-coated carbon fiber overlays that simply lay over top of your OEM expansion tank and enhances the underhood appeal while covering up the ugly, opaque white plastic coolant ball. Our precisely modeled 2-piece overlays feature a smooth, appealing exterior design with provisions machined for clearance on OE features such as coolant hose connections and the coolant level sensor. Pre-applied high-temperature automotive-grade 3M foam tape ensures the parts stay in position while creating a great seal between the upper and lower covers.    PART DESIGN Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment Made from lightweight, hand-laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured. Clear coated for excellent finish durability and UV resistance.  Hides the ugly, opaque, white plastic expansion tank  Pre-applied foam tape creates a lasting connection to the expansion tank while creating a seal between the upper/lower covers. 3M foam tape is resistant to the continuous heat in the engine bay and is resistant to chemical degradation.  Lug feature on upper overlay covers the expansion tank vent  Incorporated sight-window allows visibility of coolant level with both covers installed  Expansion tank mounting bolts remain accessible, allowing removal of expansion tank while keeping the covers in place  Compatible with all windshield washer reservoir mounting locations on various models  Compatible with the following expansion tank caps: OEM, Audi R8, Porsche 991 and Gen3 "B"    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Expansion Tank Cover Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Ensure your OEM expansion tank is clean and free of debris prior to installing self-adhesive foam strips. We recommend wiping the contact surfaces with isopropyl alcohol prior to installation. Reference our General Installation Guide for tips and suggestions.    NOTE: This part is for QTY 2 covers (upper and lower). All other items shown are for media reference only. This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8U Q3 FWD 2.0T Audi 8U Q3 Quattro 2.0T Audi A3 8P FWD 2.0T Audi A3 8P FWD TDI Audi A3 8P Quattro 2.0T Audi A3 8P Quattro 3.2L Audi A3 8P Quattro V6 3.2L Audi TT MKII FWD 2.0T Audi TT MKII Quattro 2.0T Audi TT MKII Quattro 3.2L Audi TT MKII TTS 2.0T Audi TTS MK2 (2006-2013) 2.0T Volkswagen Beetle All 1.8T Gen3 Volkswagen Beetle All 2.0T Volkswagen Beetle All 2.0T Gen3 Volkswagen Beetle All 2.5L Volkswagen Beetle All TDI Volkswagen CC 4Motion VR6 Volkswagen CC FWD 2.0T Volkswagen CC FWD VR6 Volkswagen EOS All 2.0T Volkswagen EOS All 3.2L Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sedan 1.4T Hybrid Volkswagen Jetta VI Sedan 1.8T Gen3 Volkswagen Jetta VI Sedan 2.0 Volkswagen Jetta VI Sedan 2.0T Gen3 GLI Volkswagen Jetta VI Sedan 2.5 Volkswagen Jetta VI Sedan GLI Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift 1.4T Volkswagen Jetta VI Sedan Facelift 1.4T Hybrid Volkswagen Jetta VI Sedan Facelift 1.8T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0L Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen Passat B7 FWD 1.8T Gen3 Volkswagen Passat B7 FWD 2.0T Gen3 Volkswagen R32 MKV All 3.2 Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The ECS Carbon Fiber Fuse Box / ECU Cover adds unique, authentic carbon fiber styling to the underhood of your MQB platform vehicle without any permanent modifications. Easily installs with our  conveniently pre-applied 3M tape to the underside of the cover. It's unique styling not only covers the black plastic fuse box lid, but it also has a wing that extends over the unsightly ECU clamshell bracket to further enhance engine bay styling.   PART DESIGN Our in-house engineering team was tasked with making our cover fit perfectly atop the fuse box lid and to also cover the ugly ECU clamshell bracket. It's design perfectly works with both standard AND lock-box cover ECU's.  It also retains the quick disengagement feature of locking clips for easy removal and installation to service the fuses underneath.  The included plastic-purpose 3M tape is properly selected for the harsh goings within the engine-bay environment and easily sticks on to the fuse box lid with relative ease once cleaned and dried.  The ECS Carbon Fiber Fuse Box / ECU Cover is made from lightweight, hand laid carbon fiber material with pre-impregnated carbon fiber cloth, epoxy resin and then finished in a durable gloss clear coat for UV and heat protection for continuous operating temperatures of up to 300° F.   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Fuse Box / ECU Cover was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. Our engineering team went through multiple prototypes between both physical part and tape selection and tape locations to ensure the best product was delivered to you.    INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish! See our Installation PDF under the INSTALLATION Tab for more information. *2 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation.* Previous Revisions 019725ECS01 013913LA03 This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Audi MK3 TT (2014+) Quattro 2.0T Audi RS3 8V (2018+) 2.5T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Atlas 4Motion 2.0T Gen3 Volkswagen Atlas 4Motion 3.6L V6 Volkswagen Atlas FWD 2.0T Gen3 Volkswagen Atlas FWD 3.6L V6 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details       If you've been looking for a clean, un-obstructed, stealthy wiper delete plug that features premium fitment and quality components then look no further, we've got you covered! Introducing our in-house designed and engineered ECS Billet 2-Piece Rear Wiper Delete Plug.  Featuring a smooth, logo-less, bright dip black anodized cap for the outside that has dual radii design features to follow the complex curvature of the rear hatch glass, we designed this with ultra-stealth characteristics in mind! The exterior cap is made from Type-6463 Billet Aluminum to achieve the ultra-high gloss bright dip anodized finish to match the rear hatch glass and to maintain protection against ultraviolet light. The cap features a threaded body that penetrates the hatch glass where the flat sealing washer and hardware capture from within. This design approach allows for a rigid and dependable assembly that cannot be altered from the exterior, so no worries of vandals pushing the cap in from the outside while you're not around.  Once installed the complete assembly seals against water intrusion by way of a double-O-ring sealing design. Our engineering team selected durable Buna-N material for both the exterior O-ring and interior flat sealing gasket for their water, salt and high temperature resiliency. The interior hardware includes a stainless steel black oxide washer and a black-phosphate coated flanged securing nut for long-term, dependable operation. Complete your vehicle's rear styling appearance with the ECS Billet 2-Piece Rear Wiper Delete Plug.  Fits 26.5mm hole openings.  MINI Coopers: 2002-2006 R50/R53 MINI Cooper Hatch (hardtop)   See our YouTube video DIY for a full installation tutorial! Search: "ECS Tuning VW/Audi Rear Wiper Delete Plug Install DIY" Previous Revisions MK5WPBLNK This Part Fits the Following Vehicles Make Model Submodel Engine Audi A3 8P FWD 2.0T Audi A3 8P FWD TDI Audi A3 8P Quattro 2.0T Audi A3 8P Quattro 3.2L Audi A3 8P Quattro V6 3.2L MINI All All All Volkswagen 337/20AE All 1.8T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf IV All 1.8T Volkswagen Golf IV All 2.0 Volkswagen Golf IV All TDI Volkswagen Golf IV All VR6 12v Volkswagen Golf IV All VR6 24v Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta IV All 1.8T Volkswagen Jetta IV All 2.0 Volkswagen Jetta IV All TDI Volkswagen Jetta IV All VR6 12v Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen R32 MKIV All 3.2 Volkswagen R32 MKV All 3.2 Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T Volkswagen Tiguan MQB 4Motion 2.0T Gen3 Volkswagen Tiguan MQB FWD 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Designed in-house by our industry leading engineering staff, the ECS Tuning Carbon Fiber Engine Cover Kit incorporates beauty with OE function. Made from authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin, and finished in a beautiful gloss clear coat for UV-protection and extra durability, this engine cover is sure to be turning heads!  This kit gives your engine bay the look it should have came with from the factory. ECS Tuning has created a simple overlay kit that installs directly over the factory front and rear engine covers, while still retaining the Audi rings logo and the V6 TFSI nameplate for an OEM plus look! Installation is a breeze, simply peel the paper backing from the adhesive tape, line up the overlays with your OEM engine covers, and press down firmly. The ECS Tuning Carbon Fiber Engine Cover Kit was made to follow the contours of your OEM engine cover and sit perfectly in place.  ECS Tuning recommends removing the engine covers from the vehicle before installation of the overlays to make it easier to ensure that everything is lined up properly.  This Part Fits the Following Vehicles Make Model Submodel Engine Audi A7 C7 3.0T Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 SQ5 Quattro 3.0T Audi C6 A6 All V6 3.0T Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro V6 3.0T Audi Q5 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details These harnesses from ECS are the perfect items to help make your new LED taillight install hassle free. Two harnesses are included for both your rear lights. The harnesses are made to adapt to your new LED taillights so no wiring modifications will be needed. Taillight installation doesn’t have to be complex and with these new harnesses from ECS Tuning, it won’t be. This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf R All 2.0T Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less