ECS Tuning

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your facelift B8.5 S5 or A5 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade the exterior styling on your VW MK7 Golf R with our ECS Tuning Gloss Black Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Gloss Black Diffuser!    PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment.  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Additional, unique design feature extends the flaring lines of the OEM rear bumper cover to transition into our diffuser  Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" quad, round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal. Please note: May not be compatible with larger, aftermarket oval tips.  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.​ Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer   KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - OE-type self-tapping torx screws   PRODUCT DEVELOPMENT Our ECS MK7 Golf R Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM valance in detail! See our Installation PDF under the INSTALLATION Tab for more information.   *1 sterile antiseptic alcohol wipe (ES2918127) is suggested for proper installation.*

Read more less

Fits pre-facelift models without integrated tips in the rear valance FITS SEDAN ONLY Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your pre-facelift B9 S4. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your facelift B8.5 S4 or A4 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

ECS Tuning Gloss Black Rear Diffuser - Mk7 Golf GTI Upgrade the exterior styling on your 2013 - 2017 Volkswagen MK7 GTI with our ECS Tuning Gloss Black Rear Diffuser.An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads!Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with the ECS Gloss Black Diffuser!  PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Houses 4.0" exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser. Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side) PRODUCT DEVELOPMENT The ECS MK7 GTI Rear Diffuser was designed, engineered, tested and quality inspected by ECS's own Research and Development team in their Wadsworth, Ohio facility. ECS strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.

Read more less

Upgrade your exterior styling on your Audi with the ECS Tuning Gloss Black Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B8/B8.5 A5 (with integrated trunk spoiler) and S5. The spoiler is crafted of a durable UV stabilized ABS polymer to achieve it's deep high gloss shine and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up and the surface clean of any contaminants, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  Install the spoiler as-is or with proper surface prep, this spoiler can be painted to any color you like! 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your facelift B8.59 S5 or A5 S-Line with the ECS Tuning Gloss Black Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Grille Accent Set is made of beautiful vacuum formed and bonded gloss black polymer with UV-protection for extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design  Grille Flares extend around the inside of the inlet grille to cover any exposed paint   PRODUCT DEVELOPMENT Our ECS Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape. *Does not fit Competition models Note:  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your pre-facelift B8 S4 or A4 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade the exterior styling on your VW MK7 Golf R with our ECS Tuning In-House designed and engineered Carbon Fiber Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Carbon Fiber Diffuser!    PART DESIGN Made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured then clear coated for UV resistance. Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Additional, unique design feature extends the flaring lines of the OEM rear bumper cover to transition into our diffuser  Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" quad, round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal. Please note: May not be compatible with larger, aftermarket oval tips.  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.   KIT CONTENTS Carbon Fiber Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - OE-type self-tapping torx screws   PRODUCT DEVELOPMENT Our ECS MK7 Golf R Carbon Fiber Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts in detail! See our Installation PDF under the INSTALLATION Tab for more information. *1 sterile antiseptic alcohol wipe (ES2918127) is suggested for proper installation.*

Read more less

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your pre-facelift B9 A4 S-Line. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a single tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling on your Audi with the ECS Tuning Gloss Black Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the C7 A6 and S6. The spoiler is crafted of a durable UV stabilized ABS polymer to achieve it's deep high gloss shine and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up and the surface clean of any contaminants, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  Install the spoiler as-is or with proper surface prep, this spoiler can be painted to any color you like! 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi C7 A6 FWD 2.0T Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro 2.0T Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 Quattro V6 3.0T Audi C7 S6 Quattro 4.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

So you changed the look of the front and rear of your B8/B8.5 A4 or S4 but forgot the sides?  Upgrade your exterior styling with the ECS Tuning Gloss Black Flat Side Splitters. These side skirts simply bolt on underneath the rocker panel with included self tapping screws and add a more sporty appearance to your vehicle. A great looking stand-alone body part or one that compliments other existing exterior styling upgrades.  Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment, each set is crafted of gloss black, UV stabilized ABS polymer to achieve its world class appearance and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Convenient, pre-drilled mounting holes allow you to correctly align and secure the side skirt extensions to the rocker panels. We suggest putting a dab of a rust preventative (anti seize or similar) on the tip of each screw before install.  This will lubricate the screw and protect the newly threaded holes.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Fits up to 2019 model year with *pre-facelift* front bumpers Raise the level of style on your pre-facelift B9 S4 or A4 S-Line with the ECS Tuning Gloss Black Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Grille Accent Set is made of beautiful vacuum formed and bonded gloss black polymer with UV-protection for extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design  Grille Flares extend around the inside of the inlet grille to cover any exposed paint   PRODUCT DEVELOPMENT Our ECS Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape.   Note:  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B8.5 A4 S-Line or S4 with the ECS Tuning gloss black front lip spoiler. With a flatter "splitter" style profile, this quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Lip Spoiler is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. If you are looking for a whole package, this splitter style front lip is designed to match and compliment our flat side skirts (ES4045736) and rear bumper side splitters (ES4044452).  To further compliment the look of your new front lip, check out all of the other ECS gloss black accessories, only available from ECS Tuning! *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your Volkswagen MK7 Golf R with the ECS Tuning Carbon Fiber Front Bumper Grille Flares. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required.  These were designed to provide the vehicle with a more aggressive look by accentuating the area around the inlet grilles, providing a bold, aggressive styling similar to that of the VW R400 Concept Car. An exclusive design only available through ECS Tuning, these will be sure to catch attention and turn heads.   PART DESIGN The ECS Tuning Carbon Fiber Front Bumper Grille Flare Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the outer bumper grilles, providing a similar, aggressive look to the R400 concept car Grille Flares extend around the inside of the inlet grille to cover any exposed paint Precision machined metal tooling for dimensional accuracy and consistency. Quality inspected by our in-house Engineering Team.    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Front Bumper Grille Flare Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape.   ** All other products shown in installed photography are NOT included... This kit is for QTY 2 front bumper flares ONLY!  ** *2 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.*

Read more less

Upgrade the exterior styling on your 2015+ Volkswagen MK7 / MK7.5 GTI or Golf R with the ECS Tuning Gloss Black Hatch Spoiler Extension. Our Hatch Spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the GTI and Golf R. Crafted from high quality vacuum formed gloss black ABS polymer that is enhanced with UV-stabilizer to achieve its world class appearance and durability while providing a sporty style that's sure to set your vehicle apart from the rest. Installs atop the factory hatch spoiler with no drilling, cutting or any permanent modifications.    PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Accentuates the OE body lines throughout the outer edge of the spoiler Designed to be an offset of the OE spoiler with a seamlessly integrated duck bill for the most OE plus appearance Smooth / seamless transition from the OE lines to ECS spoiler Retained OE side blade dimple feature that carries on above the doors Utilizes 3M double sided tape for a strong bond to the body on the top and bottom side of the OE spoiler to avoid any paint chafing Made from lightweight, vacuum formed gloss black ABS polymer that is enhanced with UV-stabilizer    PRODUCT DEVELOPMENT Our ECS Gloss Black Hatch Spoiler was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Once you have the spoiler lined up, simply remove the liner on the pre-installed high strength dual sided tape sections and press the spoiler firmly onto the trunk lid. See our Installation Guide for general surface prep and installation.  4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. Previous Revisions 005098LA01 Cross Reference wing, lip This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade the exterior styling on your VW MK7.5 Golf R with our ECS Tuning In-House designed and engineered Carbon Fiber Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Carbon Fiber Diffuser!    PART DESIGN Made from lightweight, hand laid epoxy resin pre-impregnated 2x2 twill weave carbon fiber cloth and autoclave cured then clear coated for UV resistance. Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Additional, unique design feature extends the flaring lines of the OEM rear bumper cover to transition into our diffuser  Designed in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Houses 4.0" quad, round exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal. Please note: May not be compatible with larger, aftermarket oval tips.  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser.   KIT CONTENTS Carbon Fiber Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7.5 Golf R Carbon Fiber Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts in detail! See our Installation PDF under the INSTALLATION Tab for more information. Cross Reference valance, splitter This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Fits 2019 Mid-Facelift Bumpers Raise the level of style on your Mid-Facelift B9 A4 S-Line or S4 with the ECS Tuning gloss black front chin spoilers. These quality pieces were engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, these front lip spoilers will be sure to catch attention and turn heads. These ECS Tuning Front Chin Spoilers are made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. To compliment the look of your new front chin spoilers, check out the other ECS gloss black accessories, only available from ECS Tuning. *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. *Front Chin Spoilers were test fit on North American bumper models - Due to variances in front bumpers on ROW models, we cannot confirm fitment on models outside North America* This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Only Fits 2019 Mid-Facelift Bumpers Raise the level of style on your Mid-Facelift B9 A4 S-Line or S4 with the ECS Tuning gloss black 3-piece front lip. These quality pieces were engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, these front lip spoilers will be sure to catch attention and turn heads. This ECS Tuning Front Lip is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. To compliment the look of your new front lip, check out the other ECS gloss black accessories, only available from ECS Tuning. *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. *Front lip was test fit on North American bumper models - Due to variances in front bumpers on ROW models, we cannot confirm fitment on models outside North America* This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling on your Audi with the ECS Tuning Gloss Black Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B5 S4 and A4. The spoiler is crafted of a durable UV stabilized ABS polymer to achieve it's deep high gloss shine and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up and the surface clean of any contaminants, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  Install the spoiler as-is or with proper surface prep, this spoiler can be painted to any color you like!   4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B5 A4 FWD 1.8T Audi B5 A4 FWD V6 12v Audi B5 A4 FWD V6 30v Audi B5 A4 Quattro 1.8T Audi B5 A4 Quattro V6 12v Audi B5 A4 Quattro V6 30v Audi B5 S4 All 2.7T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade the exterior styling on your 2018+ Volkswagen MK7.5 GTI with our ECS Tuning Gloss Black Rear Diffuser. An exclusive design only available through ECS Tuning, our rear diffuser will be sure to catch attention and turn heads! Featuring a deep profile, an aggressive vein design and extending the entire width of the rear bumper to maximize it's aggressive appearance, it will be sure to turn heads! Make a bold statement and let your VW stand out with our Gloss Black Diffuser!    PART DESIGN Designed and engineered in-house using state of the art 3D laser scanning and CAD technology for precision fitment  Mimics the lower section of the bumper & OE diffuser lines to accentuate OEM features Houses 4.0" exhaust tips; compatible with the OEM exhaust, although, we recommend larger exhaust tips for visual appeal  Mounts to OE clip locations and OE holes on the outer edges of the bumper with supplied, stainless hardware. Includes wrinkle black powdercoated, 5052 aluminum brackets to add rigid mounting to the center of the diffuser. Made from lightweight, vacuum formed UV-stabilized gloss black ABS polymer   KIT CONTENTS Gloss Black Rear Diffuser  Inner Mounting Brackets (2) and stainless steel mounting hardware (socket screws, washers and nylon lock nuts)  Outer Mounting Hardware - Stainless steel socket screws, washers and nylon lock nuts (2 sets per side)   PRODUCT DEVELOPMENT Our ECS MK7.5 GTI Rear Diffuser was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modelling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM valance in detail! See our Installation PDF under the INSTALLATION Tab for more information. Cross Reference valance, splitter This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Facelift FWD 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

  The ECS MK6 Golf Side Skirt Extensions quickly install over the OEM skirts and add a wider, more aggressive stance without the troubles of a complete side skirt swap. They feature durable materials and are 3D designed for optimum fitment. 10 counter-sunk screw holes allow for rigid installation with the included Genuine VW self tapping torx screws.  Manufactured from a lightweight fibre composite material with a polymer matrix for enhanced durability and precision fitment. It’s finished in a gloss black clear coated finish to match other gloss black exterior components and is ready for install without the need of further paint or body work required. The lightweight side skirt extensions simply screw to your existing MK6 Golf R side skirts with the included hardware. Simply line up the skirt and hold into position, carefully drill 10 holes per side through the pre-molded countersunk mounting holes and enjoy your new visual transformation!  This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf R All 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Gloss Black Rear Diffuser for your B7 A4. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of your Audi. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of a UV stabilized ABS polymer to achieve it's deep high gloss shine and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a single tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.  Make sure all tabs are lined up and lightly press the diffuser in place until the tabs click into position.  To compliment the look of your new diffuser, check out the other ECS gloss black exterior products! This Part Fits the Following Vehicles Make Model Submodel Engine Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi B7 A4 Quattro V6 3.2L *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B8.5 A5 S-Line or S5 with the ECS Tuning gloss black front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Lip Spoiler is made of a durable UV stabilized ABS polymer and includes pre-applied adhesive tape and includes self tapping screws for a complete installation. Check out all of the other ECS gloss black accessories, only available from ECS Tuning! *Note* 4 sterile antiseptic alcohol wipes (ES2918127) to clean the surface are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A5 Quattro 2.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less