ECS Tuning

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Rear Diffuser. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of the Audi B9 S4. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Features a dual tip/dual outlet design to fit the factory and most aftermarket exhaust systems and is designed to accept exhaust tips up to 4" in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.   To compliment the look of your new diffuser, check out the other ECS Carbon Fiber products! **Not compatible with hands free open/close feature Cross Reference valance This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your B8 S4 with the ECS Tuning Carbon Fiber Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a similar look to the RS model front bumper covers. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. The ECS Tuning Carbon Fiber Grille Accent Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. 3M dual sided tape has been pre-applied to each piece, ready for installation right out of the box.  Note:  Due to slight variations in bumpers, we include extra 3M tape to use as needed.  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. To compliment the look of your new grille accents, check out the ECS Carbon Fiber Trunk Spoiler, Side Blades, Diffuser, and Front Lip, only available from ECS Tuning.   Previous Revisions 018360ECS01 Cross Reference grill This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your Facelift B8 A4 S-Line or S4 with the ECS Tuning Carbon Fiber Front Lip Spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Carbon Fiber Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. To compliment the look of your new front lip, check out the ECS Carbon Fiber Trunk Spoiler, Side Blades, and Diffuser, only available from ECS Tuning. *Note* For additional installation security, ECS Tuning recommends adding self tapping screws the ensure the front lip is secured properly at high speeds. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Rear Diffuser. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of the Facelift B8 A4 & S4. The diffuser is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.   To compliment the look of your new diffuser, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Trunk Spoiler. This trunk spoiler was engineered in-house and designed to follow the curves and lines of the body to offer a more aggressive look that matches the factory appeal of the B8 A4 & S4. The spoiler is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides a sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. After you have everything lined up, simply remove the liner on the already attached high strength dual sided tape and press the spoiler firmly onto the trunk lid.  *For B8 chassis vehicles with an integrated trunk spoiler. Fits all B8/B8.5 S4. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. Cross Reference Spoiler This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your pre-facelift B8 S4 or A4 S-Line with the ECS Tuning Carbon Fiber Grille Accent Set. This quality addition was engineered and designed in-house to fit directly to your factory front bumper cover, with no modifications required. The accents were designed to provide the vehicle with a more aggressive look by accentuating the area around the fog light grilles, providing a drastic improvement to the front end aesthetic. An exclusive design only available through ECS Tuning, this grille accent set will be sure to catch attention and turn heads. PART DESIGN The ECS Tuning Carbon Fiber Grille Accent Set is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability Applies directly to the front bumper cover using the pre-applied adhesive tape to accentuate the area around the inlet grilles, providing an aggressive style. Features from the bumper, grille, and inlet grille integrated into our design  Grille Flares extend around the inside of the inlet grille to cover any exposed paint   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Grille Accent Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Installation is very simple and non-permanent. Simply clean the impacted area and apply the Grille Flares directly to the front bumper cover using the pre-applied adhesive tape.   Note:  Ensure the bumper is clean and free of any dirt, debris, or wax prior to installation. 4 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Raise the level of style on your Pre-facelift B8 A4 S-Line/S4 with the ECS Tuning carbon fiber front lip spoiler. This quality piece was engineered and designed in-house to fit directly to your factory front bumper to provide a much more aggressive visual appearance and the appearance of a much lower ride height. An exclusive design only available through ECS Tuning, this front lip spoiler will be sure to catch attention and turn heads. The ECS Tuning Front Carbon Fiber Lip Spoiler is made of authentic, hand laid carbon fiber material with pre-impregnated carbon fiber cloth and epoxy resin and finished in a beautiful gloss clear coat for UV-protection and extra durability. To compliment the look of your new front lip, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. *Note* For additional installation security, ECS Tuning recommends adding self tapping screws the ensure the front lip is secured properly at high speeds. 4 sterile antiseptic alcohol wipes (ES2918127) are suggest for proper installation. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Rear Diffuser. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of the Pre-Facelift B8 A4 & S4. The diffuser is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.   To compliment the look of your new diffuser, check out the ECS Carbon Fiber Trunk Spoiler and Side Blades, only available from ECS Tuning. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Protection of your undercarriage and oil pan is vital. Between giant potholes, speed bumps and bumpy terrain your vehicle is exposed to a variety of impacts that can ruin your oil pan or other critical components. Protect your vitals with our ECS Tuning in-house design and engineered Street Shield Aluminum Skid Plate Kit. Constructed from strong and sturdy 5052 lightweight aluminum, our skid plate is sure to stand up to harsh road conditions that your OEM plastic belly pan could not. This plate is laser cut for a perfect fit and includes all new mounting hardware for the perfect finish.  We have incorporated an oil drain plug door so you don't have to remove the skid plate for an oil change.  It is designed to sit flush with the rest of the skid plate so there is nothing hanging down to catch on any road debris.  Engineered and manufactured in the USA, you can expect nothing but the best performance and longevity with our superior Aluminum Street Shield Skid Plate Kit from ECS Tuning! Be sure to check out our PDF attached below for complete installation instructions.

Read more less

Flimsy, broken and mangled OEM plastic battery covers can leave your engine bay looking a little out of date and in need of repair. If your battery cover is in need of replacement or if your engine bay could use a touch of beauty then we have you COVERED! Our ECS Tuning in-house designed and engineered Battery Cover kit includes a precision 3D designed heat resistant, textured matte black polymer battery lid with a durable CNC-bent powder-coated aluminum battery case.    PART DESIGN BATTERY LID Made from heat resistant, textured matte black polymer; special attention paid to the heat found in the engine bay throughout product testing, in addition to OE-type textured material to match OEM underhood components.  Stepped edge allows for secure fitment to the battery case quick latches  Further design characteristics such as the raised center lid add styling aspects that looks great in any engine bay BATTERY CASE CNC-bent from heavy duty 5052 aluminum for precise fitment and durability  Powder-coated in a tough wrinkle black finish for a sleek and OEM-type finish  Pre-installed "Quick Latches" make installation and serviceability of the battery lid quick and easy  Laser cut mounting tabs engage the OEM battery tray with precision, locking the case into position for rigid mounting  Pre-installed neoprene rubber edge trim outlines the positive battery cable pass-through for abrasion protection and a clean, finished appearance    PRODUCT DEVELOPMENT Our ECS Tuning Battery Cover Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing. This Part Fits the Following Vehicles Make Model Submodel Engine Audi A3 8P FWD 2.0T Audi A3 8P Quattro 2.0T Audi A3 8P FWD TDI Volkswagen Beetle All 2.0T Volkswagen Beetle All 2.5L Volkswagen Beetle All TDI Volkswagen CC FWD 2.0T Volkswagen EOS All 2.0T Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sedan Facelift 1.4T Volkswagen Jetta VI Sedan 1.4T Hybrid Volkswagen Jetta VI Sedan Facelift 1.4T Hybrid Volkswagen Jetta VI Sedan 1.8T Gen3 Volkswagen Jetta VI Sedan Facelift 1.8T Gen3 Volkswagen Jetta VI Sedan 2.0 Volkswagen Jetta VI Sedan Facelift 2.0L Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sedan 2.0T Gen3 GLI Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VI Sedan 2.5 Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sedan GLI Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B7 All 2.5L Volkswagen Passat B7 All TDI Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Boring, torn and deteriorating cloth battery covers can leave your engine bay looking a little outdated and in need of something more. If your battery cover is in need of replacement or if your engine bay could use a touch of beauty then we have you COVERED! Our ECS Tuning in-house designed and engineered Battery Cover kit includes a precision 3D designed heat resistant, textured matte black polymer battery lid with a durable CNC-bent powder-coated aluminum battery case.    PART DESIGN BATTERY LID Made from heat resistant, textured matte black polymer; special attention paid to the heat found in the engine bay throughout product testing, in addition to OE-type textured material to match OEM underhood components.  Stepped edge allows for secure fitment to the battery case quick latches  Further design characteristics such as the raised center lid add styling aspects that looks great in any engine bay BATTERY CASE CNC-bent from heavy duty 5052 aluminum for precise fitment and durability  Powder-coated in a tough wrinkle black finish for a sleek and OEM-type finish  Pre-installed "Quick Latches" make installation and serviceability of the battery lid quick and easy  Laser cut mounting tabs engage the OEM battery tray with precision, locking the case into position for rigid mounting  Pre-installed neoprene rubber edge trim outlines the positive battery cable pass-through for abrasion protection and a clean, finished appearance    PRODUCT DEVELOPMENT Our ECS Tuning Battery Cover Kit was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.4 e-tron Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V FWD TDI Audi A3 8V Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

    In most vehicle applications, the corrugated turbo inlet hose found in the intake system is not designed for performance or modification. It was designed to get the job done, and when adding a performance filter, intake, or tune the stock inlet hose can start to show it's weakness when suction from the turbocharger is increased. The ECS Carbon Fiber Turbo Inlet Pipe was designed in-house and made with high quality hand laid carbon fiber layers providing a strong and secure fit. A smooth interior provides unimpeded airflow, while the carbon fiber exterior adds an appearance upgrade to any engine bay.    PART DESIGN The carbon fiber pipe is constructed from 2x2 twill weave carbon fiber, gloss clear coated for UV and heat protection for continuous operating temperatures of up to 300°. Designed to fit perfectly in place of the factory accordion pipe, our CAD design assures a smooth gradual transition from the intake/airbox to the turbo inlet. The included silicone hose couplers allow clean fitment of any intake setup; The smooth, straight coupler is used with a hard mounted intake pipe configurations to the engine (such as ECS Kohlefaser Luft-Technik mounted to the cylinder head) The accordion rubber coupler is used with OE-type mounting configurations (such as OEM airbox)   PERFORMANCE FEATURES With its smooth interior surface as compared to the OEM accordion tube's ribbed, turbulent interior you can expect a smoother transition from air filter to the turbo inlet. We found that utilizing the carbon inlet tube over silicone provides a stronger, more pronounced induction noise that we all love!    PRODUCT DEVELOPMENT Our ECS Carbon Fiber Turbo Inlet Pipe was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts in detail and how to select each coupler! See our Installation PDF under the INSTALLATION Tab for more information.   Cross Reference APR Tube, APR Inlet Pipe, carbon fiber inlet tube This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Audi MK3 TT (2014+) Quattro 2.0T Audi TTS MK3 (2014+) 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Looking to spice up your interior? Our ECS Tuning Carbon Fiber Steering Wheel Hub Overlay drastically improves your interior with race-inspired carbon fiber material! Our in-house designed and engineered overlay covers the trim on the steering hub, from the switches to the lower emblem and remains in place with automotive-grade 3M tape. Installation is accomplished within minutes and does NOT require removal of the airbag.    PART DESIGN Made from lightweight, hand-laid carbon fiber material with pre-impregnated 2x2 twill weave carbon fiber cloth and epoxy resin, then autoclave cured and finished in a durable gloss clear coat for UV and heat protection for continuous operating temperatures of up to 300° F. 3D laser scanned OEM steering wheel to ensure optimal fitment Designed to cover the trim on steering hub for optimal coverage  Emblem cutout to display "GTI", "R" or "GLI" logo  Pre-installed automotive 3M double-sided adhesive to make installation a breeze Minimal carbon fiber material thickness to offer the least amount of intrusion.   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Steering Wheel Hub Overlay was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish. See our Installation PDF under the INSTALLATION Tab for more information. Please note, airbag removal is NOT required! This simply slides around the airbag cover.  We recommend cleaning the steering hub with isopropyl alcohol prior to installation. 1 packet - ES2918127  Please be advised that this part is a hand-trimmed, carbon overlay. Details of product fitment can be observed in our installation photography. This part will rest above the steering wheel hub and some discernable rise off of the hub may be observed.  This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VII GLI 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The ECS Carbon Fiber Core Support Braces replace the weak stamped steel lock carrier support braces, found over top the headlights, for increased durability and underhood appeal.  Made from ultra-lightweight, hand laid carbon fiber material, our braces will outperform and outshine the OEM set. Simple to install, these make for a great stand-alone addition or complementary to other underhood carbon fiber products for outstanding beauty!   PART DESIGN Made from lightweight, hand laid carbon fiber material with pre-impregnated carbon fiber cloth, epoxy resin and then finished in a durable gloss clear coat for UV and heat protection for continuous operating temperatures of up to 300° F. Retains all of the critical features to mount to the core support and fender. Utilizes zinc-plated rivet nuts for mounting the headlights while providing good corrosion resistance to the elements. Retains hood latch tab feature that allows left hand drive, or right hand drive customers to mount their hood latch cable just like the OE component.   PRODUCT DEVELOPMENT Our ECS Carbon Fiber Core Support Brace Set was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Looking for installation tips? Look no further, we put together a full installation tutorial from start to finish including how to remove your OEM parts ! See our Installation PDF under the INSTALLATION Tab for more information. 100% reversible, these reuse all OEM mounting hardware.  Looking for shiny new bolts? See ES471667 - QTY 5 required per each side Cross Reference Lock Carrier support This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf R All 2.0T Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum and Type II anodized for appearance and corrosion resistance.  This cap is not only designed to look great, but fit and function just like the factory part with improved ergonomics.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi 100 FWD V6 Audi 100 Quattro V6 Audi 4M Q7 Quattro 2.0T Audi 4M Q7 Quattro 3.0T Audi 4M Q8 Quattro 3.0T Audi 8S TTRS Quattro 2.5T Audi 8U Q3 FWD 2.0T Audi 8U Q3 Quattro 2.0T Audi 8V S3 Quattro 2.0T Audi A3 8P FWD 2.0T Audi A3 8P FWD TDI Audi A3 8P Quattro 2.0T Audi A3 8P Quattro 3.2L Audi A3 8P Quattro V6 3.2L Audi A3 8V FWD 1.4 e-tron Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V FWD TDI Audi A3 8V Quattro 2.0T Audi A7 C7 3.0 TDI Audi A7 C7 3.0T Audi B5 A4 FWD 1.8T Audi B5 A4 FWD V6 12v Audi B5 A4 FWD V6 30v Audi B5 A4 Quattro 1.8T Audi B5 A4 Quattro V6 12v Audi B5 A4 Quattro V6 30v Audi B5 S4 All 2.7T Audi B6 A4 FWD 1.8T Audi B6 A4 FWD V6 30v Audi B6 A4 Quattro 1.8T Audi B6 A4 Quattro V6 30v Audi B6 S4 All V8 Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi B7 A4 Quattro V6 3.2L Audi B7 RS4 All V8 Audi B7 S4 All V8 Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 Allroad Quattro 2.0T Audi B8 RS5 All 4.2L Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi B8 SQ5 Quattro 3.0T Audi C4 A6 FWD 2.8 Audi C4 A6 Quattro 2.8 Audi C4 S4 Quattro 20v T Audi C4 S6 Quattro 20v T Audi C5 A6 FWD V6 2.8L Audi C5 A6 FWD V6 3.0L Audi C5 A6 Quattro 2.7T Audi C5 A6 Quattro 4.2 Audi C5 A6 Quattro V6 2.8L Audi C5 A6 Quattro V6 3.0L Audi C5 Allroad Quattro 2.7T Audi C5 Allroad Quattro 4.2L Audi C5 S6 Quattro 4.2 Audi C6 A6 FWD V6 3.2L Audi C6 A6 Quattro V6 3.2L Audi C6 A6 Quattro V8 4.2L Audi C6 S6 All V10 5.2L Audi C7 A6 FWD 2.0T Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro 2.0T Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 Quattro V6 3.0T Audi C7 S6 Quattro 4.0T Audi C7 S7 Quattro 4.0T Audi D2 A8 FWD 3.7 Audi D2 A8 Quattro 4.2 Audi D2 S8 Quattro D2 4.2L Audi D3 A8 Quattro 4.2 Audi D3 A8 Quattro W12 Audi D3 S8 Quattro D3 V10 Audi MK3 TT (2014+) Quattro 2.0T Audi Q5 Quattro 2.0T Audi Q5 Quattro 3.0 TDI Audi Q5 Quattro 3.0T Audi Q5 Quattro 3.2L Audi Q7 All 3.0T Audi Q7 All TDI Audi Q7 All V6 Audi Q7 All V8 Audi RS3 8V (2018+) 2.5T Audi RS7 Quattro 4.0T Audi TTS MK3 (2014+) 2.0T Volkswagen 337/20AE All 1.8T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Arteon 4Motion 2.0T Gen3 Volkswagen Arteon FWD 2.0T Gen3 Volkswagen Atlas 4Motion 2.0T Gen3 Volkswagen Atlas 4Motion 3.6L V6 Volkswagen Atlas FWD 2.0T Gen3 Volkswagen Atlas FWD 3.6L V6 Volkswagen Beetle All 1.8T Gen3 Volkswagen Beetle All 2.0T Volkswagen Beetle All 2.0T Gen3 Volkswagen Beetle All 2.5L Volkswagen Beetle All TDI Volkswagen CC 4Motion VR6 Volkswagen CC FWD 2.0T Volkswagen CC FWD VR6 Volkswagen Corrado All G60 Volkswagen Corrado All VR6 12v Volkswagen EOS All 2.0T Volkswagen EOS All 3.2L Volkswagen Eurovan T4 All 5cl Diesel Volkswagen Eurovan T4 All 5cyl Volkswagen Eurovan T4 All VR6 Volkswagen Eurovan T4 All VR6 12v Volkswagen Eurovan T4 All VR6 24v Volkswagen Golf IV All 1.8T Volkswagen Golf IV All 2.0 Volkswagen Golf IV All TDI Volkswagen Golf IV All VR6 12v Volkswagen Golf IV All VR6 24v Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Hatchback e-Golf Volkswagen Golf VII Hatchback TDI Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta IV All 1.8T Volkswagen Jetta IV All 16v Volkswagen Jetta IV All 2.0 Volkswagen Jetta IV All TDI Volkswagen Jetta IV All VR6 12v Volkswagen Jetta IV All VR6 24v Volkswagen Jetta IV Wagon All Volkswagen Jetta IV GLI All 1.8T Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sedan 1.4T Hybrid Volkswagen Jetta VI Sedan 1.8T Gen3 Volkswagen Jetta VI Sedan 2.0 Volkswagen Jetta VI Sedan 2.0T Gen3 GLI Volkswagen Jetta VI Sedan 2.5 Volkswagen Jetta VI Sedan GLI Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift 1.4T Volkswagen Jetta VI Sedan Facelift 1.4T Hybrid Volkswagen Jetta VI Sedan Facelift 1.8T Gen3 Volkswagen Jetta VI Sedan Facelift 2.0L Volkswagen Jetta VI Sedan Facelift 2.0T Gen3 GLI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen New Beetle All 1.8T Volkswagen New Beetle All 16v Volkswagen New Beetle All 2.0 Volkswagen New Beetle All 2.5L Volkswagen New Beetle All TDI Volkswagen Passat B3 All 16v Volkswagen Passat B3 All VR6 12v Volkswagen Passat B4 All 2.0 Volkswagen Passat B4 All TDI Volkswagen Passat B4 All VR6 12v Volkswagen Passat B5 4 Motion 1.8T Volkswagen Passat B5 4 Motion V6 30v Volkswagen Passat B5 4 Motion W8 Volkswagen Passat B5 FWD 1.8T Volkswagen Passat B5 FWD TDI Volkswagen Passat B5 FWD V6 30v Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen Passat B7 FWD 1.8T Gen3 Volkswagen Passat B7 FWD 2.0T Gen3 Volkswagen Phaeton 4 Motion V8 Volkswagen Phaeton 4 Motion W12 Volkswagen R32 MKIV All 3.2 Volkswagen R32 MKV All 3.2 Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T Volkswagen Tiguan MQB 4Motion 2.0T Gen3 Volkswagen Tiguan MQB FWD 2.0T Gen3 Volkswagen Touareg 1 All TDI Volkswagen Touareg 1 All V6 Volkswagen Touareg 1 All V8 Volkswagen Touareg 2 All TDI Volkswagen Touareg 2 All V10 TDI Volkswagen Touareg 2 All V6 Volkswagen Touareg 2 All V6 TDI Volkswagen Touareg 2 All V8 Volkswagen Touareg 3 Hybrid All *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum and Type II anodized for appearance and corrosion resistance.  This cap is not only designed to look great, but fit and function just like the factory part with improved ergonomics.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8U Q3 FWD 2.0T Audi 8U Q3 Quattro 2.0T Audi A3 8P FWD 2.0T Audi A3 8P Quattro 2.0T Audi A3 8P FWD TDI Audi A7 C7 3.0 TDI Audi B6 A4 FWD V6 30v Audi B6 A4 Quattro V6 30v Audi B6 S4 All V8 Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi B7 A4 Quattro V6 3.2L Audi B7 RS4 All V8 Audi B7 S4 All V8 Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 S4 Quattro 3.0T Audi C5 A6 FWD V6 3.0L Audi C5 A6 Quattro V6 3.0L Audi C5 A6 All V6 30v Audi C5 Allroad Quattro 4.2L Audi C6 A6 All 4.2 Audi C6 A6 All V6 3.0T Audi C6 A6 FWD V6 3.2L Audi C6 A6 Quattro V6 3.2L Audi C6 A6 Quattro V8 4.2L Audi C7 A6 FWD 2.0T Audi C7 A6 Quattro 2.0T Audi C7 A6 Quattro 3.0 TDI Audi D3 A8 Quattro 4.2 Audi Q5 Quattro 2.0T Audi Q5 Quattro 3.0T Audi TT MKII Quattro 2.0T Audi TTS MK2 (2006-2013) 2.0T Audi TTS MK2 (2006-2013) 2.0T Volkswagen Beetle All 2.0T Volkswagen Beetle All TDI Volkswagen CC FWD 2.0T Volkswagen EOS All 2.0T Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf VI All 2.0T Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sedan TDI Volkswagen Jetta VI Sedan Facelift TDI Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B7 All TDI Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T Volkswagen Touareg 1 All V8 Volkswagen Touareg 2 All V8 Volkswagen Touareg 3 All V6 TDI *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The ECS Tuning Textured Fuse Box / ECU Cover adds unique, affordable styling to the underhood of your MQB platform vehicle without any permanent modifications. Easily installs with our  conveniently pre-applied 3M tape to the underside of the cover. It's unique styling not only covers the black plastic fuse box lid, but it also has a wing that extends over the unsightly ECU clamshell bracket to further enhance engine bay styling.    PART DESIGN Our in-house engineering team was tasked with making our cover fit perfectly atop the fuse box lid and to also cover the ugly ECU clamshell bracket. It's design perfectly works with both standard AND lock-box cover ECU's.  It also retains the quick disengagement feature of locking clips for easy removal and installation to service the fuses underneath.  The included plastic-purpose 3M tape is properly selected for the harsh goings within the engine-bay environment and easily sticks on to the fuse box lid with relative ease once cleaned and dried.  Manufactured from a specific resin with a heat additive to stand up to temperatures in excess of 300°F.    PRODUCT DEVELOPMENT Our ECS Textured Fuse Box / ECU Cover was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Remove the fuse box lid, clean the surface with isopropyl alcohol, peel the tape and press firmly to stick the 3M tape to the surface. *2 sterile antiseptic alcohol wipes (ES2918127) are suggested for proper installation.* This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Audi MK3 TT (2014+) Quattro 2.0T Audi RS3 8V (2018+) 2.5T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Atlas 4Motion 2.0T Gen3 Volkswagen Atlas 4Motion 3.6L V6 Volkswagen Atlas FWD 2.0T Gen3 Volkswagen Atlas FWD 3.6L V6 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Sportwagen TDI Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII Sedan 1.4T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum and Type II anodized for appearance and corrosion resistance.  This cap is not only designed to look great, but fit and function just like the factory part with improved ergonomics.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum and Type II anodized for appearance and corrosion resistance.  This cap is not only designed to look great, but fit and function just like the factory part with improved ergonomics.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

The details matter!  Dress up your engine bay by removing the cheap and generic plastic cap and replacing it with a full billet cap - not just an overlay.  Designed and engineered in-house by ECS Tuning, this precision machined billet aluminum cap is just what you need!  Our caps are made out of a solid piece of 6061-T6 billet aluminum.  This cap is not only designed to look great, but fit and function just like the factory part with improved ergonomics.   This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 A5 Quattro 2.0T Audi B9 A5 Quattro 2.0T Sportback Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

If you're looking for an easy, inexpensive way to enhance your underhood appearance or if your engine bay could use a touch of premium carbon fiber then we have you COVERED! Our ECS Tuning in-house designed and engineered Carbon Fiber Fuse Box Cover features a precision 3D designed gloss clear-coated carbon fiber overlay that simply lays over top your OEM fuse box lid and enhances the underhood appeal. Our precisely modeled overlay features sleek lines and edges for that ultra-smooth look. Our design eliminates the awkward edge found on the outer, front edge of the OEM fuse box lid and creates a smooth, attractive flat surface. Trapped dirt on the upper surface is now a thing of the past with our cover, keeping your engine bay tidier and easier to clean.  In addition to our design elements, there is no concern of water or other environmental impacts on your critical electrical components as our fuse box overlay simply works in harmony with the OEM fuse box lid to simply add to the cosmetic appeal with beautiful gloss carbon fiber material. Furthermore, the factory release latches remain fully functional allowing for uninterrupted serviceability of the fuse box cover if access is ever needed.  The carbon fiber overlay is made from 2x2 twill weave that is gloss clear coated for UV and heat protection and to seal against environmental impact for prolonged durability. The included foam tape makes installation a breeze. Simply peel and stick the foam pads to your OEM fuse box cover to the areas shown in our installed photos and then stick on our carbon fiber overlay. No need to worry about the tape's integrity as it's rated for up to 200° F.  and made from strong adhesive backing with polyurethane foam material.  Easy to install, easy to style, get your ECS Carbon Fiber Fuse Box Overlay Kit today!   Be sure to check out our other ECS Tuning Carbon Fiber Underhood Products for your vehicle: 1. Carbon Fiber Engine Cover - 2.0T TSI - ES2804425 2. Carbon Fiber Intake Systems (MK6 GTI / Jetta GLII) ES2979256 (Carbon Tube/Carbon Box) ES2966359 (Carbon Tube/Aluminum Heat Shield) ES2863350 (Wrinkle Black Aluminum Tube/Carbon Box) ES2863351 (Polished Aluminum Tube/Carbon Box) 3. Carbon Fiber Oil Filter Cover - 2.0T TSI - ES3200158 4. Carbon Fiber Battery Cover Kit - ES3187910   **Installation Note: Ensure your OEM fuse box lid is clean and free of debris prior to installing self-adhesive foam strips. Reference our installation photos for foam strip installation locations.  This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8J TTRS Quattro 2.5T Audi A3 8P FWD 2.0T Audi A3 8P Quattro 2.0T Audi TT MKII FWD 2.0T Audi TT MKII Quattro 2.0T Audi TT MKII TTS 2.0T Audi TT MKII Quattro 3.2L Audi TTS MK2 (2006-2013) 2.0T Audi TTS MK3 (2014+) 2.0T Volkswagen CC 4Motion VR6 Volkswagen CC FWD 2.0T Volkswagen CC FWD VR6 Volkswagen EOS All 2.0T Volkswagen EOS All 3.2L Volkswagen Golf R All 2.0T Volkswagen Golf V All 2.0T Volkswagen Golf V All 2.5 Volkswagen Golf V All TDI Volkswagen Golf VI All 2.0T Volkswagen Golf VI All 2.5 Volkswagen Golf VI All TDI Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI Volkswagen Jetta VI Sportwagen 2.0T Volkswagen Jetta VI Sportwagen 2.5 Volkswagen Jetta VI Sportwagen TDI Volkswagen Passat B6 4 Motion 3.6L Volkswagen Passat B6 FWD 2.0T Volkswagen Passat B6 FWD 3.6L Volkswagen R32 MKV All 3.2 Volkswagen Tiguan 1 4 Motion 2.0T Volkswagen Tiguan 1 FWD 2.0T Volkswagen Tiguan 2 4 Motion 2.0T Volkswagen Tiguan 2 FWD 2.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

From the factory, the B9 Audi comes with plastic 3 pronged caps to plug the holes in both wheel wells.  Unfortunately when driving in wet, dirty, or snowy conditions, these unsealed gaps allow all of that mess to sling off of your tires, directly onto the cap and into the engine bay.  This results in not only a messy look but allows corrosive salt to enter the engine compartment.  Check out our before and after photos for a side by side comparison, or better yet, go check under the hood of your car - we'll wait.   ECS Tuning has you covered -- literally.  Our in-house Product Development and Engineering team has come up with a perfect solution.  These flexible injection molded polymer plugs seal out all of the nasty, leaving your engine bay and strut tower area squeaky clean.  Featuring a matte black soft textured finished with a subtle embossed ECS logo, they look great and correct the factory mistake!   Our ECS Engine Bay Block Off Plugs were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing. *Note:  Caps are side specific (marked DS for left side and PS for right side), see installation PDF below for more information on the install procedure.  This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 A5 Quattro 2.0T Audi B9 A5 Quattro 2.0T Sportback Audi B9 Allroad Quattro 2.0T Audi B9 RS5 Quattro 2.9T Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Upgrade your exterior styling with the ECS Tuning Carbon Fiber Rear Diffuser. This diffuser was engineered and designed in-house to add a more aggressive appearance to the rear of your vehicle that matches with the factory appeal of the Audi 8V RS3. An exclusive design only available through ECS Tuning, this rear diffuser will be sure to catch attention and turn heads. The diffuser is crafted of high quality hand laid carbon fiber to achieve it's world class appearance and durability and provides an aggressive and sporty style that's sure to set your vehicle apart from the rest. Designed to fit the factory oval and also dual round tips up to 102mm in diameter.  Installs with no drilling, cutting, or modification of any kind required. Simply remove your currently installed valance and install the diffuser using the factory mounting locations and hardware.     Cross Reference valance This Part Fits the Following Vehicles Make Model Submodel Engine Audi RS3 8V (2018+) 2.5T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Open up your left and right bumper vents to match the center honeycomb grille and to get increased airflow to your engine bay. These vents are designed to swap directly for the stock units. A quick upgrade using simple handle tools. Cross Reference Grill This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf V All 2.0T Volkswagen Jetta V All 2.0T Volkswagen Jetta V All 2.5 Volkswagen Jetta V All TDI *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less