Exhaust Systems

Are you content with the factory exhaust on your Volkswagen GTI but would like to upgrade to larger exhaust tips to properly fill out your diffuser, or just enhance the overall look? ECS Tuning has just what you need with our direct-fit , clamp-on 4.0" Exhaust Tips! Our ECS 4.0" Exhaust Tips were designed and engineered in-house as a direct-fit replacement to the factory tips. Simply cut the spot welds off your factory tips, slide on and clamp down your new ECS tips, then stand back and enjoy.    PART DESIGN Designed and Engineered in-house to fit directly to your OEM exhaust system, after removal of the OE tips Tips are made from T304 Stainless Steel and feature T304 band clamps, stainless bolts and zinc coated nuts Available in either chrome or black chrome finishes Tips feature a 4.0" Double Wall, Rolled Edge, Slant Cut outlet Precision laser etched "ECS Tuning" stacked logo    PRODUCT DEVELOPMENT Our ECS Exhaust Tips were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Requires cutting of the OE exhaust tip spot welds to remove the OEM tip.  Due to the OEM tailpipe length some of the OE pipe may be visible when looking inside the exhaust tip. For an improved aesthetic look you can trim the OE tailpipes to suit by using our Schwaben Exhaust Pipe Cutting Tool -  ES3106581.  Fits 2010 - 2017 Volkswagen GTI's with OEM catback exhaust. This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VI All 2.0T Volkswagen Golf VII Hatchback 2.0T Gen3

Read more less

Change the tone of your Audi S5 3.0T exhaust with an easy-to-install upgrade from ECS Tuning! The ECS Tuning Center X-Pipe installs in place of the resonator located in the middle of the factory exhaust system to increase exhaust note and allow for better flow of exhaust gases. The engineers at ECS Tuning have designed a direct fit dual exhaust pipe featuring an X cross section in the center to balance exhaust pulses and increase expulsion of spent exhaust gases from the engine. But more importantly, installation of the Center X-Pipe increases the factory exhaust system note exponentially giving a more tuned European sound. The ECS X-pipe is fully CNC mandrel bent from high quality 304L stainless steel, tig welded with smooth merged pipe joints for optimal flow, and finished off with a soft brushed finish for exceptional looks. Installation is a breeze and can be easily performed with the vehicle lifted on proper jack stands in your own driveway. Our in-depth installation PDF, located under the Installation Tab, walks you through everything from proper measurement, cutting, and install to ensure a perfect fit to your OEM exhaust. We've even included a complete set of clamps to make sure everything is properly installed without worry of leaks. 304L Stainless Steel Engineered and tested in-house Precision CNC mandrel bent TIG welded joints Adds increased tuned European sound with minimal interior dB/drone Will NOT cause CEL (Check Engine Light) *Installation requires cutting of the OEM exhaust using an exhaust pipe cutter, reciprocating saw, or other similar tool. The Schwaben Exhaust Pipe Cutter is available for order as es3106581. Cross Reference res delete, resonator delete, x pipe, xpipe This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Change the tone of your S4 3.0T exhaust with an easy-to-install upgrade from ECS Tuning! The ECS Tuning Center X-Pipe installs in place of the resonator located in the middle of the factory exhaust system to increase exhaust note and allow for better flow of exhaust gases. The engineers at ECS Tuning have designed a direct fit dual exhaust pipe featuring an X cross section in the center to balance exhaust pulses and increase expulsion of spent exhaust gases from the engine. But more importantly, installation of the Center X-Pipe increases the factory exhaust system note exponentially giving a more tuned European sound. The ECS X-pipe is fully CNC mandrel bent from high quality 304L stainless steel, tig welded with smooth merged pipe joints for optimal flow, and finished off with a soft brushed finish for exceptional looks. Installation is a breeze and can be easily performed with the vehicle lifted on proper jack stands in your own driveway. Our in-depth installation PDF, located under the Installation Tab, walks you through everything from proper measurement, cutting, and install to ensure a perfect fit to your OEM exhaust. We've even included a complete set of clamps to make sure everything is properly installed without worry of leaks. 304L Stainless Steel Engineered and tested in-house Precision CNC mandrel bent TIG welded joints Adds increased tuned European sound with minimal interior dB/drone Will NOT cause CEL (Check Engine Light) *Installation requires cutting of the OEM exhaust using an exhaust pipe cutter, reciprocating saw, or other similar tool. The Schwaben Exhaust Pipe Cutter is available for order as es3106581. Cross Reference resonator delete, res delete This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Product Details Got a couple hours in your afternoon or Saturday? Here is a great way to increase the sound quality of your RS4 along with increasing top end performance. ECS RS4 H-Pipe eliminates your factory center resonator with a H-pipe that really enhances the sound quality of your RS4 without any sacrifice in interior cabin drone. Dyno charts have also shown a increase of 3-5hp between 6-8000 rpm. Installing this ECS H-pipe still allows use of the factory flapper valves in the rear mufflers. With the ECS H-pipe installed the difference between the flapper valves being open or closed is much more dramatic that with the stock exhaust system.Quite simply this is a fantastic way of increasing sound quality of your RS4 without having to go through the large expense of replacing the whole "cat" back system. This upgrade is a simple bolt on modification and measures 2.25" in diameter. Simply cut the center resonator out (between the center resonator & the rear mufflers) & install the ECS H-pipe using the factory sleeve clamps & two supplied clamps.Limited lifetime warranty to the original purchaser. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B7 RS4 All V8 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Enhance the exhaust note on your VW MK7 or MK8 GTI with our in-house engineered ECS Resonator Delete Pipe Kit! Our Resonator Delete Pipe Kit removes the heavy and restrictive factory resonator assembly and replaces it with our high flow, straight-through exhaust section. This adds a deeper exhaust note in a simple, cost effective way without replacing the entire exhaust system. The resonator delete creates a noticeable increase in exhaust sound and more exhilarating turbo noise, without adding significant drone at cruising speeds.   PART DESIGN Our in-house designed and engineered resonator delete pipe is made of durable T304 stainless steel 1.25mm wall thickness CNC mandrel bent tubing for straight-through exhaust gas routing. A high quality stainless steel, solid tube, barbed exhaust hanger is TIG-welded into the factory location for direct fitment, and flared ends match the original exhaust system perfectly. Stainless steel exhaust clamps are included for the inlet and outlet location for an easy installation. Our Resonator Delete Pipe Kit is CNC mandrel bent for OE quality fitment and is designed to avoid interference with other components, while removing sharp bends in favor of smoother transitions.   KIT CONTENTS Resonator Delete Pipe for OEM catback exhaust system  Stainless Steel Exhaust Band Clamp - QTY 1 Stainless Steel Exhaust Sleeve Clamp - QTY 1   PERFORMANCE FEATURES Lessens total system backpressure while reducing overall weight    PRODUCT DEVELOPMENT Our ECS Resonator Delete Pipe Kit was was designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Installation is as easy as cut, place it in position, and clamp!  See our installation PDF for more information. Cross Reference res delete, exhaust system, mid pipe This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VIII FWD 2.0T Gen3 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Are you content with the factory exhaust on your Volkswagen GTI but would like to upgrade to larger exhaust tips to properly fill out your diffuser, or just enhance the overall look? ECS Tuning has just what you need with our direct-fit , clamp-on 4.0" Exhaust Tips! Our ECS 4.0" Exhaust Tips were designed and engineered in-house as a direct-fit replacement to the factory tips. Simply cut the spot welds off your factory tips, slide on and clamp down your new ECS tips, then stand back and enjoy.    PART DESIGN Designed and Engineered in-house to fit directly to your OEM exhaust system, after removal of the OE tips Tips are made from T304 Stainless Steel and feature T304 band clamps, stainless bolts and zinc coated nuts Available in either chrome or black chrome finishes Tips feature a 4.0" Double Wall, Rolled Edge, Slant Cut outlet Precision laser etched "ECS Tuning" stacked logo    PRODUCT DEVELOPMENT Our ECS Exhaust Tips were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We strive for the highest level of precision and quality through leading-edge product development technology including FARO laser scanning for reverse engineering and quality inspection, SolidWorks 3D CAD modeling, rapid prototyping utilizing our in-house 3D printer, and rigorous long term product testing.   INSTALLATION AND SUPPORT Requires cutting of the OE exhaust tip spot welds to remove the OEM tip.  Due to the OEM tailpipe length some of the OE pipe may be visible when looking inside the exhaust tip. For an improved aesthetic look you can trim the OE tailpipes to suit by using our Schwaben Exhaust Pipe Cutting Tool -  ES3106581.  Fits 2010 - 2017 Volkswagen GTI's with OEM catback exhaust.  This Part Fits the Following Vehicles Make Model Submodel Engine Volkswagen Golf VI All 2.0T Volkswagen Golf VII Hatchback 2.0T Gen3

Read more less

Change the tone of your B9 S4 3.0T exhaust with an easy-to-install upgrade from ECS Tuning! The ECS Tuning Center X-Pipe installs in place of the resonator located in the middle of the factory exhaust system to increase exhaust note and allow for better flow of exhaust gases.  Weighing in at 11.7 pounds, our X-Pipe also shaves off 4.6 pounds from the OEM center resonator! The engineers at ECS Tuning have designed a direct fit dual exhaust pipe featuring an X cross section in the center to balance exhaust pulses and increase expulsion of spent exhaust gases from the engine. But more importantly, installation of the Center X-Pipe increases the factory exhaust note giving a more tuned European sound. The ECS X-pipe is fully CNC mandrel bent from high quality 304L stainless steel, tig welded with smooth merged pipe joints for optimal flow, and finished off with a soft brushed finish for exceptional looks. Installation is a breeze and can be easily performed with the vehicle lifted on proper jack stands in your own driveway. Our in-depth installation PDF, located under the Installation Tab, walks you through everything from proper measurement, cutting, and install to ensure a perfect fit to your OEM exhaust. We've even included a complete set of clamps to make sure everything is properly installed without worry of leaks. 304L Stainless Steel Engineered and tested in-house Precision CNC mandrel bent TIG welded joints Adds increased tuned European sound with minimal interior dB/drone X-Pipe is 11.7 lbs compared to the OEM center resonator at 16.3 lbs Will NOT cause CEL (Check Engine Light) Head over to our YouTube Channel for sound clips of the X-Pipe! *Installation requires cutting of the OEM exhaust using an exhaust pipe cutter, reciprocating saw, or other similar tool. The Schwaben Exhaust Pipe Cutter is available for order as ES3106581. **Does not include ECS Tunnel Brace shown in photograph Cross Reference x pipe, xpipe, resonator delete, res delete This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 S4 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Change the tone of your Audi B9 SQ5 3.0T exhaust with an easy-to-install upgrade from ECS Tuning! The ECS Tuning Center X-Pipe installs in place of the resonator located in the middle of the factory exhaust system to increase exhaust note and allow for better flow of exhaust gases. The engineers at ECS Tuning have designed a direct fit dual exhaust pipe featuring an X cross section in the center to balance exhaust pulses and increase expulsion of spent exhaust gases from the engine. But more importantly, installation of the Center X-Pipe increases the factory exhaust system note exponentially giving a more tuned European sound. The ECS X-pipe is fully CNC mandrel bent from high quality 304 stainless steel, TIG welded with smooth merged pipe joints for optimal flow, and finished off with a soft brushed finish for exceptional looks. Installation is a breeze and can be easily performed with the vehicle lifted on proper jack stands in your own driveway. Our in-depth installation PDF, located under the Installation Tab, walks you through everything from proper measurement, cutting, and install to ensure a perfect fit to your OEM exhaust. We've even included a complete set of clamps to make sure everything is properly installed without worry of leaks. Head over to our YouTube channel for a comparison video @ ECS Tuning! 60mm 304 Stainless Steel with 1.5mm wall thickness Engineered and tested in-house Precision CNC mandrel bent Utilizes OE hanger position Barbed exhaust hangers TIG welded joints Adds increased tuned European sound with minimal interior dB/drone Includes all necessary exhaust clamps for installation 4.6 pound weight savings over OEM resonator  Will NOT cause CEL (Check Engine Light) *See install PDF below.  Installation requires cutting of the OEM exhaust using an exhaust pipe cutter, reciprocating saw, or other similar tool. The Schwaben Exhaust Pipe Cutter is available for order as es3106581. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 SQ5 Quattro 3.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less