Exhaust Systems

REAR DIFFUSER + MILLTEK RS UPGRADE KIT - FORD FIESTA MK8 ST & MK8.5 ST (2018-2024) FITS ONLY:Ford Fiesta ST Mk8 till september 2020 COMPLETE SET CONTAINS: GLOSS BLACK REAR DIFFUSER MILLTEK GPF EXHAUST TWIN EXIT ADDON KIT MILLTEK DESCRIPTION: Every Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.Mandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance. We always recommend the exhaust is fitted by a competent garage or tuning workshop so normally avoid issuing install guides. MILLTEK EU TYPE-APPROVAL CERTIFICATE REAR DIFFUSER DESCRIPTION: ** This product is a replacement for original diffuser **  CHARACTERISTICS OF REAR DIFFUSER:- Gloss Black- Adds aesthetic value.- Lightweight and offers some flexibility.- This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION ABOUT REAR DIFFUSER:- No additional work is required to finish the product.- The product will arrive with a protective film.- Removal of the protective film will void any returns, only remove once you are certain the product will fit.- We cannot be held responsible for the incorrect installation or use of this product.- Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.- We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.- This product has been TUV MATERIALGUTACHTEN certified.- The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk. Product is made of ABS plastic. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

FORD FIESTA MK7 2008-2017 HIGH QUALITY DUAL EXIT STAINLESS STEEL AXEL-BACK EXHAUST SYSTEM WITH SILENCER AND EXHAUST PIPES fits : FORD FIESTA MK 7 2008-2017 ALL VERSIONS - STANDARD, ZETEC S, ST   Works Perfectly with the Maxton Design RS Style Rear Bumper- FO-FI-7-RS-R1F Pipe Diameter: 2.5 Inch Tip Diameter: 4 inch   COMPLETE SET CONTAINS: READY FOR MOUNTING DUAL EXIT STAINLESS STEEL AXEL-BACK EXHAUST SYSTEM WITH SILENCER AND EXHAUST PIPES    Product is made of Stainless Steel.Designed for all types of Ford Fiesta (2008-2017) :* Ford Fiesta Standard * Ford Fiesta Titanium * Ford Fiesta ZETEC * Ford Fiesta ZETEC S (ST-Line)* Ford Fiesta ST System has EEC Type-Approval certificate Homologation CEE.Approval number : e3*70/157/*2007/34*0014*00 Silencer type : 3540/Ford Fiesta   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

REAR DIFFUSER + MILLTEK RS UPGRADE KIT - FORD FIESTA MK8 ST (2018-2022) FITS ONLY: Kit designed for Ford Fiesta MK8 ST & MK8.5 ST with Milltek sport exhaust system already installed (changing car look to RS style). Change the look to RS style with no additional hassle!  COMPLETE SET CONTAINS:- Rear diffuser IN GLOSS BLACK- Milltek GPF/OPF back exhaust system    MILLTEK DESCRIPTION: Every Milltek system is designed, developed and hand-finished here in the UK by time-served craftsmen, each one produced in aerospace grade type 304, non-magnetic stainless steel. This superior material is less susceptible to discolouration, lasts almost indefinitely and is used throughout the entire construction of our pipework, silencers and associated hardware.Mandrel bending ensures constant radius bends for optimised gasflow, and bore diameters are carefully enlarged over stock to ensure ultimate performance without the loss of mid-range torque. All of the Milltek exhaust systems endure a comprehensive acoustic development process to deliver a tone that is sporty and crisp, without ever inducing NVH, drone or cabin resonance. MILLTEK EU TYPE-APPROVAL CERTIFICATE   REAR DIFFUSER DESCRIPTION: ** This product is a replacement for original diffuser **    CHARACTERISTICS OF REAR DIFFUSER:- Adds aesthetic value.- Lightweight and offers some flexibility.- This product is made from ABS plastic. The same material is used widely in the automotive industry.   MORE INFORMATION ABOUT REAR DIFFUSER:- No additional work is required to finish the product.- The product will arrive with a protective film.- Removal of the protective film will void any returns, only remove once you are certain the product will fit.- We cannot be held responsible for the incorrect installation or use of this product.- Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.- We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual.- This product has been TUV MATERIALGUTACHTEN certified.- The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.   Product is made of ABS plastic. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).   Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

EXHAUST V1 FORD FOCUS ST LINE MK4 (2018- ) FITS ONLY:Ford Focus ST-Line Mk4 (2018-2022) Ford Focus ST-Line Mk4 Facelift (2022–) Fit only with rear valance (FO-FO-4-STLINE-RS1). Exhaust only fits gasoline engines. 108-339A/16 - Fits cars with torsion beam rear axle only. 108-335/16 - Fits cars with multilink suspension only. Homologation includes only engines 1.5 150 hp and 1.5 182 hp. Fits 1.0 Engine. COMPLETE SET CONTAINS:-> EXHAUST  Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Exhaust V.2 Ford Focus ST Line Mk4 FITS ONLY:Ford Focus ST-Line Mk4 (2018-2022) Ford Focus ST-Line Mk4 Facelift (2022–) Fit only with rear valance (FO-FO-4-STLINE-RS2). Exhaust only fits petrol engines. Please ensure the correct type of Rear Suspension is selected. Homologation includes only engines 1.5 150 hp and 1.5 182 hp. Fits 1.0 Engine. COMPLETE SET CONTAINS:-> EXHAUST Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox We can only accept a return within 30 days of delivery, if the product is in its original condition including protective film still on. A refund will be processed excluding shipping costs.All products arrive with a protective film, this is a very thin plastic vacuum sealed around the product to avoid the item sustaining any damage. Once removed you will notice the product does not have any scuffs or scratches.

Read more less

Rear Valance V.3 Ford Fiesta ST Mk8 FITS ONLY: Ford Fiesta ST Line Mk8 (2018-2021) Ford Fiesta ST Mk8 (2018-2021) Ford Fiesta ST Line Mk8 Facelift (2021-2024) Ford Fiesta ST Mk8 Facelift (2021-2024)  The rear Diffuser only fits custom exhaust tips with dimensions as in the photo EXHAUST NOT INCLUDED! DIFFUSER ONLY The purpose of this product is for customers who want the look of the "Maxton | Milltek" but do not want a milltek exhaust, you will need to have a custom exhaust built to suit the diffuser COMPLETE SET CONTAINS: -> Rear DiffuserCOLOUR:-> Gloss Black This product requires the removal of the original diffuser, self-tapping screws are needed to secure fitment of the new diffuser. CHARACTERISTICS: Adds aesthetic value. Lightweight and offers some flexibility. This product is made from ABS plastic. The same material is used widely in the automotive industry. MORE INFORMATION: No additional work is required to finish the product. The product will arrive with a protective film.  Removal of the protective film will void any returns, only remove once you are certain the product will fit. We cannot be held responsible for the incorrect installation or use of this product. Please compare the vehicle in the listing photos and title to your own, to ensure correct fitment.  We advise trusting installation to a qualified professional unless you are confident following the provided fitting manual. This product has been TUV MATERIALGUTACHTEN certified. The removal of the holographic verification sticker will void a return, this identifies the item as an official and authentic Maxton Design product, removal is at buyer’s risk.

Read more less

EXHAUST TIPS VW POLO MK5 (6R) FITS WITH DOUBLE MIDDLE EXHAUST REAR VALANCE !Fits only: VW Polo MK5 (6R) Standard/ GTI (2009 - 2014) Complete set contains: READY FOR MOUNTING EXHAUST TIPS VW POLO MK5 (6R) FITS WITH DOUBLE MIDDLE EXHAUST REAR VALANCE  More information: Product is made of Stainless Steel.Designed for all types of VW POLO MK5 (6R) 2009-2014 : VW Polo MK5 (6R) Standard VW Polo MK5 (6R) GTI System has EEC Type-Approval certificate Homologation CEE. Approval number : e3*70/157/*2007/34*0014*00This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).

Read more less

SPORTS EXHAUST MUFFLER EXHAUST-VOLKSWAGEN GOLF MK5-VOLKSWAGEN GOLF MK6Fits:  VW GOLF MK5 with following engines: 1.4 75 PS (55 kW; 74 hp) 1.4 80 PS (59 kW; 79 hp) 1.4 90 PS (66 kW; 89 hp) 1.4 TSI 140 PS (103 kW; 138 hp) 1.4 TSI 170 PS (125 kW; 168 hp) 1.6 102 PS (75 kW; 101 hp) 1.6 FSI 115 PS (85 kW; 113 hp)        2.0 FSI 150 PS (110 kW; 148 hp) 1.9 TDI 90 PS (66 kW; 89 hp) 1.9 TDI 105 PS (77 kW; 104 hp) 2.0 SDI 75 PS (55 kW; 74 hp) 2.0 TDI 140 PS (103 kW; 138 hp) 2.0 TDI DPF 140 PS (103 kW; 138 hp) 2.0 TDI DPF 170 PS (125 kW; 168 hp)       2.0 TFSI GTI 200 PS (147 kW; 197 hp) 2.0 TFSI GTI 210 PS (155 kW; 210 hp) 2.0 TFSI 230 PS (169 kW; 227 hp)   GTI and Edition 30 VW GOLF MK6 with following engines: 1.2 TSI  63kW 1.2 TSI  77kW 1.4 16V 59kW 1.4 TSI 90kW 1.4 TSI  120kW 1.6 16V  75kW 1.8 TSI  120kW 2.0 TFSI GTI 150kW  2.0 TFSI GTI 173kW   1.6 TDI  77kW 2.0 TDI 81kW 2.0 TDI 103kW 2.0 TDI 125kW ---------------------------------------- This item is new, high quality.Exhaust end is made of polished stainless steel. FEATURES: Diameter 100mm. Connection pipe diameter 65mm. Full approval entry into service of TUV. The sport exhaust comes with an EC approval / ABE.In our offer we have rear valance adapted to exhaust. Professional installation is highly recommended.

Read more less

EXHAUST VW GOLF 8 V.1 (GTI LOOK) FITS ONLY:VW GOLF 8 (2019-) Fit only with rear valance (VW-GO-8-RS1O__O). The exhaust only fits the petrol version (1.5 TSI). Fits cars with multilink suspension only. COMPLETE SET CONTAINS:-> EXHAUST

Read more less

EXHAUST VW GOLF 8 V.2 (R32 LOOK) FITS ONLY:VW GOLF 8 (2019-) Fit only with rear valance (VW-GO-8-RS1_OO_). The exhaust only fits the petrol version (1.5 TSI). Fits cars with multilink suspension only. COMPLETE SET CONTAINS:-> EXHAUST SHIPPING AND RETURNS DOWNLOAD FITTING MANUAL

Read more less

SPORTS EXHAUST TIPSVOLKSWAGEN SCIROCCO R R32 LOOKVOLKSWAGEN GOLF V R R32 LOOKVOLKSWAGEN GOLF VI R R32 LOOK** For the standard version, modifications to the mounting brackets are required **This item is new, high quality.Exhaust end is made of polished stainless steel.REPLACES REAR OEM EXHAUST.Diameter 100mm. Professional installation is highly recommended. Fits cars with following engines: 1 1.4 16V 2 1.4 FSI 3 1.4 TSI 4 1.6 16V 5 1.6 FSI 6 2.0 FSI 7 2.0 TFSI 8 2.0 SDI 9 1.9 TDI 10 2.0 TDI

Read more less

SPORTS EXHAUST TIPS   -VOLKSWAGEN SCIROCCO R R32 LOOK   -VOLKSWAGEN GOLF V R R32 LOOK   -VOLKSWAGEN GOLF VI R R32 LOOK   This item is new, high quality.   Exhaust end is made of polished stainless steel.   REPLACES REAR OEM EXHAUST.   Diameter 100mm.       Professional installation is highly recommended.Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less