FREE SHIPPING ON ALL EXHAUSTS (UK Mainland Only)
TrustPilot Rating 4.6 ★★★★☆ - EXCELLENT - Read our 840+ Reviews

Oil Coolers

30 products

  • Forge Motorsport - Oil Cooler for Hyundai Kona N

    forge Motorsport Forge Motorsport - Oil Cooler for Hyundai Kona N

    Developed, designed, and influenced from our direct involvement with BTCC and success with the Hyundai i30N, we are proud to release an oil cooling solution for the Hyundai Kona N. This oil cooler radiator is lifted straight from our motorsport department, so we know that this product performs well, and has been proven in several race events and winning vehicles over the past years. The cores are durable enough to last full race seasons and are perfect for fast road and track use. The cooler has now also been utilised in both of our other Hyundai oil cooling solutions and cleverly redesigned for a 100% plug and play solution for the Kona N. During our time developing world leading products for the Kona N, we found a significant flaw with the vehicle, especially when tuned, just as we did with the I30N. Oil temperatures can climb to dangerous levels when on track or when driven hard in hotter climates. Rising oil temperatures will result in only one outcome: a reduction of sufficient lubrication of your engines internal components, which, in due course, can potentially lead to engine damage. We saw oil temperatures reduce significantly during the development of this product when locating the oil cooler heat exchanger at the front of the vehicle’s radiator grill, this allowed for superior air flow. FMOC14 is a must-have product for the keen driver to protect their vehicles longevity, and perform safely and reliably. Unlike many oil cooler kits on the market, FMOC14 keeps the factory oil to water cooler in position - this essentially doubles your engines oil cooling. This product is not to be confused with a universal oil cooler, FMOC14 has a laser cut aluminium bracket which makes for perfect fitment to the Kona N. The kit is completely bespoke for this vehicle, with perfect length braided oil lines and our intelligent sandwich plate design making for a straightforward installation. The oil cooler is also designed to be mounted in the most efficient way possible as shown in the diagram below. This is to avoid oil cavitation which can also in some cases lead to potential engine damage over a long period of time. Manufactured in Gloucester, UK, FMOC14 is made to the uppermost standard and is backed up by the Forge Motorsport lifetime warranty. The kit comes with the following:1x Forge Aluminium sandwich plate1x Twin pass oil cooler 4x M6x20 fasteners4x M6 washers2x Oil lines 4x M6 Rubber Riv nuts1x M20x1.5 adaptor1x weather stripAll the fixings required and a comprehensive fitting guide

    £573.94

  • AIRTEC Motorsport Oil Cooler for Hyundai I20N

    Airtec AIRTEC Motorsport Oil Cooler for Hyundai I20N

    As part of our expanding Hyundai platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the i20N model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified i20N owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the bumper with the limited space available. As a result, our kit includes a bespoke oil cooler design with the mounting brackets welded into position to ensure the perfect fitment. The comprehensive package also includes high quality braided hose lines with Aerotec fittings and mounting brackets to route the lines, a CNC-machined sandwich plate and all fixtures and fittings, including instructions for a bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features although minor drilling is required. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified i20N models. PLEASE NOTE: There is the option of either FOUR bolt or FIVE bolt oil modine/sandwich plates. If you car is a potential crossover (late 2022/early 2023) then we advise you check the one on your car.  2021 models: Five bolt2022 models: Five bolt2023 models: Four bolt2024 models: Four bolt  Features: Comprehensive kit designed specially for the i20N platform Four or Five bolt oil modine/sandwich plate Reduces temperatures on track and road Designed and developed in the UK Bespoke large capacity external oil cooler with built-in brackets  CNC-machined sandwich plate for the i20N model High-quality hoses and fittings Includes all fixtures and detailed fitting instructions AIRTEC part no: ATMSHYU11

    £369.95

  • AIRTEC Motorsport Gearbox Oil Cooler for Honda Civic FL5 Type R

    Airtec AIRTEC Motorsport Gearbox Oil Cooler for Honda Civic FL5 Type R

    As part of our expanding Honda product range, AIRTEC Motorsport are proud to launch our uprated gearbox oil cooler suitable for track or fast road use. To date, there is no other company offering a gearbox oil cooler on the market, but our kit hasn’t just been designed to help cool the transmission, it also helps remove heat from the engine’s cooling system, which helps reduce crucial operating temperatures. This is because from the factory, there is a simple heat exchanger/oil Modine located by the gearbox that uses the engine’s coolant to help cool the gearbox oil. But by adding an external oil cooler into this existing loop, both gearbox and engine running temperature are effectively reduced. The substantial increase in gearbox oil volume thanks to the cooler and lines also help keep temperatures lower for longer. The oil cooler itself mounts neatly to a supplied replacement lower brace bar behind the rad pack that is stronger and more rigid than the original Honda brace it replaces. The comprehensive package also features an air duct panel to direct fresh air to the oil cooler. Made from lightweight aluminium that is laser cut for a perfect fitment, the panel features more ventilation slots for additional passive cooling under the engine and uses all the original fixings for a direct replacement. Finished in a high-quality black powder coat, the kit requires no trimming or cutting and can be reverted back to standard. The fitting kit includes oil lines and fittings, as all fixtures required to fit, including a detailed installation guide. Features: Unique kit designed specifically for the Honda Civic FL5 Reduces transmission AND engine running temperatures Direct replacement kit that requires no cutting or trimming Features air scoop panel to feed fresh air to the oil cooler Finished in high-quality black powder coat Includes all fittings and fixtures Features detailed fitting guide Registered Design Right number: Application Pending  AIRTEC Part No: ATMSHON6

    £449.95

  • AIRTEC MOTORSPORT OIL COOLER FOR PEUGEOT 308 GTI - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL COOLER FOR PEUGEOT 308 GTI

    As part of our expanding Peugeot product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the 308 GTi model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified 308 GTi owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track, road and competition cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the upper grille area without affecting or intruding the enclosed space.  The package includes an AIRTEC Motorsport oil cooler, a billet sandwich plate, bespoke laser-cut and powder coated brackets, high-quality braided hose lines with Aerotec fittings and all fixtures and fittings, including instructions for a bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified 308 GTi models. Features: Comprehensive kit designed specially for the Peugeot 308 GTi platform Reduces temperatures on track and road Billet sandwich plate included Designed and developed in the UK No cutting or drilling required to fit Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures and detailed instructions AIRTEC Part No: ATMSP&C3

    £398.95

  • AIRTEC MOTORSPORT OIL COOLER FOR MINI R56 COOPER S - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL COOLER FOR MINI R56 COOPER S

    Following an extensive development process, AIRTEC Motorsport are proud to launch our new oil cooler kit aimed at modified R56 Mini Cooper S owners who struggle to maintain steady oil temperatures on track, or during fast road use.  Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. The challenge with this kit was to integrate a large capacity, external oil cooler mounted neatly behind the upper grille for direct airflow, whilst integrating seamlessly with the car’s existing fixtures and fittings. The result is a comprehensive package that includes a tried-and-tested 13-row AIRTEC Motorsport oil cooler, a billet aluminium take-off adapter, a bespoke laser-cut and powder coated mounting bracket and high-quality braided hose lines with Aerotec fittings, as well as all fixtures and detailed instructions for a simple, bolt-on installation.  Its cooling efficiency and easy fitment makes it an essential modification for all modified R56 Mini Cooper S models. Please note: Trimming of the upper plastic grille is required to fit. Key features: •     Designed and developed in the UK •     Reduces oil temperatures on track and road •     Proven AIRTEC large capacity external oil cooler •     Billet aluminium take-off adapter plate •     Bespoke laser-cut and powder coated brackets •     High-quality hoses and fittings •     Comprehensive kit with all fixtures, fittings and instructions AIRTEC part no: ATMSMINI6

    £389.00

  • AIRTEC MOTORSPORT OIL COOLER KIT FOR FIESTA MK8.5 ST (FACELIFT) - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL COOLER KIT FOR FIESTA MK8.5 ST (FACELIFT)

    TECHNICAL DATA As part of our expanding Mk8.5 Fiesta platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the ST model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified Mk8.5 ST owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the front bumper. However, the Mk8.5 Fiesta has very limited available space directly behind the open grille area, which meant we developed an innovative solution that mounts the oil cooler in front of the right-hand side arch liner and is fed a constant flow of cool air by an air feed duct that’s included in the kit. The package also includes a AIRTEC Motorsport oil cooler, bespoke laser-cut and powder coated AIRTEC brackets, high quality braided hose lines with Aerotec fittings, a thermostat-controlled sandwich plate and all fixtures and fittings, including instructions, for a simple bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk8.5 ST models. Features: Comprehensive kit designed specially for the Mk8.5 Fiesta ST platform Reduces temperatures on track and road Front intake directs constant feed of cold air to the filter Designed and developed in the UK No cutting or drilling required to fit Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures and detailed instructions AIRTEC Part No: ATMSFO139

    £418.90 - £628.32

  • Hyundai i30N MK3.5 (Facelift) Oil Cooler - Car Enhancements UK

    forge Motorsport Forge Motorsport - Hyundai i30N MK3.5 (Facelift) Oil Cooler

    Developed from our direct involvement with BTCC and success with the previous generation I30N, Forge Motorsport is proud to release an oil cooler kit for the Hyundai i30N MK3.5. This oil cooler radiator is lifted straight from our motorsport department, so we know this component performs extremely well, as well as the cores tough and durable construction. Next stage was to design a kit incorporating this core which will fit the i30N Mk3.5 perfectly - the result is a bespoke oil cooler kit with true motorsport development behind it. During our time developing new products for the second generation i30N we found a significant floor with the vehicle especially when tuned. Oil temperatures can climb to dangerous levels when on track or when driven hard in hotter climates, The rising oil temperatures change the viscosity potentially thinning the oil, this will result in only one outcome, a reduction of sufficient lubrication of your engines internal components. Therefore, the FMOC13 is a must have product for the keen driver. The location of the oil cooler at the front of the vehicle’s radiator grill allows for superior air flow. During our development of this product, we have seen oil temperatures reduced significantly. Unlike many oil cooler kits, the FMOC13 keeps the factory oil to water cooler in position. This essentially doubles your engines oil cooling. This new product is not to be confused with a universal oil cooler. FMOC13 has a laser cut aluminium bracket which makes for perfect fitment to the i30N crash bar and has an incorporated side ducting which guides air flow through the core. Manufactured in Gloucester UK, FMOC13 is made to the uppermost standard and is backed up by the Forge Motorsport lifetime warranty. It is available in raw finish or black powder coat finish for the stealthier look. We’ve incorporated a thermostat that is built into the oil cooler sandwich plate, this has been set to open at 85C as this was observed to be the optimal working temperature of the oil cooler when testing, this means the engine is working at its most efficient oil temperature range however hard you push the vehicle.   The kit comes with the following: 1x Forge aluminium sandwich plate1x twin pass oil cooler 4x M6x20 fasteners4x M6 washers2x oil lines 4x M6 Rubber Riv nuts1X M20x1.5 adaptor1X weather stripAll the fixings required 

    £517.69

  • AIRTEC MOTORSPORT OIL COOLER KIT FOR FOCUS MK4 ST 2.3 - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL COOLER KIT FOR FOCUS MK4 ST 2.3

    As part of our expanding Mk4 Focus platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the ST 2.3-litre model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified Mk4 ST owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the upper grille area without obstructing the air intakes. As a result, our design includes a designated scoop on the left-hand side that supports the oil cooler and channels cold air towards the intakes. The package also includes an AIRTEC Motorsport oil cooler, bespoke laser-cut and powder coated brackets, high quality braided hose lines with Aerotec fittings, a thermostat-controlled sandwich plate and all fixtures and fittings, including instructions for a bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk4 Focus ST models. Features: Comprehensive kit designed specially for the Mk4 Focus ST platform Reduces temperatures on track and road Scoop directs constant feed of cold air to the intake Designed and developed in the UK No cutting or drilling required to fit Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures and detailed instructions

    £409.45

  • AIRTEC MOTORSPORT OIL COOLER KIT FOR FIESTA ST MK8 - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL COOLER KIT FOR FIESTA ST MK8

    As part of our expanding Mk8 Fiesta platform product range, AIRTEC Motorsport is proud to launch our oil cooler kit for the ST model. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s oil cooling ability for modified Mk8 ST owners who struggle to maintain steady oil temperatures on track, or during fast road use. With vast experience in developing uprated oil cooler packages for a variety of modified track and road cars, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the front bumper. However, the Mk8 Fiesta has very limited available space directly behind the open grille area, which meant we developed an innovative solution that mounts the oil cooler in front of the right-hand side arch liner and is fed a constant flow of cool air by an air feed duct that’s included in the kit. The package also includes a AIRTEC Motorsport oil cooler, bespoke laser-cut and powder coated AIRTEC brackets, high quality braided hose lines with Aerotec fittings, a thermostat-controlled sandwich plate and all fixtures and fittings, including instructions, for a simple bolt-on installation. The kit is designed to integrate seamlessly with the car’s existing features and requires no drilling or cutting, so is completely reversible if need be. Its improved cooling efficiency and easy fitment makes it an essential modification for all modified Mk8 ST models. Features: Comprehensive kit designed specially for the Mk8 Fiesta ST platform Reduces temperatures on track and road Front intake directs constant feed of cold air to the filter Designed and developed in the UK No cutting or drilling required to fit Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Includes all fixtures and detailed instructions AIRTEC Part No: ATMSFO129

    £418.90 - £628.38

  • AIRTEC MOTORSPORT OIL COOLER KIT FOR FIAT 500/595/695 ABARTH - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL COOLER KIT FOR FIAT 500/595/695 ABARTH

    It’s cooling efficiency and easy fitment makes it an essential modification for all modified Fiat 500/595/695 Abarth models. AIRTEC part no: ATMSFT1 TECHNICAL DATA As part of our expanding Fiat product range, AIRTEC Motorsport is proud to launch our oil cooler kit upgrade suitable for track or fast road use. Following an extensive development process, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Fiat 500/595/695 Abarth owners who struggle to maintain steady oil temperatures on track, or during fast road use. Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. The challenge with this kit was to locate an external oil cooler in the small space available from where the original intercooler set up was positioned, whilst integrating seamlessly with the car’s existing fixtures and fittings to ensure no drilling or cutting was required. As a result, we have developed a kit that is completely reversible if need be. The comprehensive package includes a tried and tested 19-row oil cooler, our own design of sandwich plate made from billet and powder coated black, bespoke laser-cut and powder coated brackets, high quality braided hose lines with Aerotec fittings, and all fixtures for a simple bolt-on installation, including instructions. It’s cooling efficiency and easy fitment makes it an essential modification for all modified Fiat 500/595/695 Abarth models. PLEASE NOTE: THIS OIL COOLER KIT HAS BEEN DESIGNED TO FIT WITH AN AIRTEC MOTORSPORT UPRATED INTERCOOLER IN PLACE AND WILL NOT FIT WITH THE STANDARD TWIN-INTERCOOLER SETUP. WE CAN NOT CONFIRM IF THIS WILL FIT WITH ANY OTHER AFTER MARKET INTERCOOLER.  Key features: Designed and developed in the UK No cutting or drilling required to fit Reduces temperatures on track and road Billet sandwich plate finished in power coated black Bespoke laser-cut and powder coated brackets High quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions AIRTEC part no: ATMSFT1

    £385.83

  • DSG Oil Cooler System for MQB DQ381 (7 Speed Only) – VWR29DQ381 - Car Enhancements UK

    Racingline DSG Oil Cooler System for MQB DQ381 (7 Speed Only) – VWR29DQ381

    2.0 TSI DSGgearbox oil cooler ​ For DQ 250 6-speed and DQ381 7-speed It's not just your engine oil that you need to protect. Your DSG gearbox is very susceptible to overheating, leading to protection mode that reduces engine power and eventually prevents gear selection. Why fit theDSG oil cooler kit? Our unique DSG Oil Cooler Kit is an essential fit for any hard-driven MQB 2.0 TSI car running high power levels or in hot climates. It's a complete ready to install package, using a clever sandwich plate design for straightforward and completely reliable installation.   Transferring more power and torque through the DSG gearbox generates ever more heat to dissipate.  Significantly increased oil temperatures means only one thing: a decrease in the ability for your DSG box to stay properly cooled, eventually causing power drop and gear selection issues.  Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade - losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the engine torque, increase shift times and eventually loose gear selection. ooThe RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  - 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler - doubling up your cooling capability when it's needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. HIGH EFFICIENCY COOLER Our 10-row stacked plate design efficiently forces the hot oil through a series of aluminium pressed plates. Heat dissipates as cold air moves across the plates. 210 SERIES BRAIDED HOSE Our oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience. Protective external sheath avoids any rubbing damage in use.   TEMPERATURE CONTROL Our unique adaptor block oil take-off includes a clever internal thermostatic-control valve to direct oil flow through the cooler only when temperature hits 82°c/180°F. COLD AIR LOCATION The front-mount location brackets of the RacingLine cooler kit places it in the optimum airflow and ensures that oil temperature drops and excess heat is funnelled out efficiently. PRECISION MACHINED Precision machined billet components utilising the latest 5 Axis CNC machines for perfect accuracy, first time, every time.  LOW PROFILE COOLER The kit includes a replacement factory-spec oil/water cooler with a lower height, allowing for easy fitment without affecting the battery tray above it. CONFIRMED APPLICATIONS VWR29G7250 / DQ250 6-SPEED GEARBOXES ONLY * VWR29DQ381 / DQ381 7-SPEED GEARBOXES ONLY ​ *not for US-spec DQ250 with Secondary Air Intake (SAI) system > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8V 2013-2020 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TT 3 8S 2014+ > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi SQ2 2018+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Ateca 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+   DSG COOLER  FITMENT. As you’d expect, the RacingLine DSG Oil Cooler is a beautifully detailed complete kit, developed exclusively for MQB cars with either DQ250 6-speed or DQ381 7speed DSG gearbox.   The system is designed for straightforward fitting and ultimate reliability. Everything needed for perfect fitment is included.  Unlike other DSG oil cooler kits, the RacingLine package keeps the oil/water cooler and adds to it with the oil/air cooler 10 row stacked-plate oil cooler radiator, flowed to obtain maximum heat dissipation without undue pressure drop Optimum front mounted location behind left side front lower grill aperture with all necessary brackets and fixing kit supplied 210 Series stainless steel, nylon braided feed and return lines run past the chassis leg into the bumper cavity, then connecting to the oil cooler core DOUBLE COOLING. Our DSG Cooler design is a unique design: it retains the factory oil/water gearbox cooling system, plus adds our oil/air cooling as well. Why? The DSG oil will still quickly warm up from the hot water in the engine's coolant system, reaching full operating temperature as soon as possible. But that's where the problem begins on a hard-driven car. The hot engine coolant will now have little to no cooling effect on the DSG oil, and gearbox temps start to rise rapidly. That's the point at which our sophisticated thermostatic control valve inside the adaptor block will then divert hot oil out to the new 10-row cooler located in the cool fresh air flow. After the cooled transmission oil returns from the cooler, it carries less heat to be absorbed into the engine coolant system - helping control all the temperatures under the bonnet. Our replacement oil/water cooler (that's the silver part in the picture) is lower in height than the factory one. So the total height of both parts still fits perfectly under the battery location above it.  WHAT'S IN THE KIT?Oil cooler mounting brackets  AN10 210 series Nylon braided feed and return line Billet CNC thermostatic adaptor block Replacement, low-profile oil/water cooler AN10 10-row oil/air cooler core Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins BRACKET SETS The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models.  ​ Mounting for the bracket set requires drilling bolt holes through the front crash bar. GOLF 7 & 7.5 PLUS OTHER MQB MOUNTING AUDI S3 8V MOUNTING WHAT'S THE PROBLEM ON TRACK? When oil temperature reaches 138°C/280°F, the DSG's control system initiates a reduction in engine torque, meaning a serious drop in performance.   Carry on driving, and if temperatures then rise above 145°C/293°F, your DSG clutches no longer get the fluid pressure they require and you loose drive altogether as the box goes into a safety mode. ​ If you're in a hot climate this can happen after only about 15 minutes at the track - meaning a long wait while your gearbox cools down again. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Sophisticated thermostatic control adaptor block to divert oil flow around new cooling system - but only when needed Billet gloss-anodised for long-lasting protection and good looks Oil lines with protective outer nylon braid strengthened by a stainless steel inner weave for maximum resilience.  T6 6061 CNC aluminium used throughout for precision accurate fit 10-row stacked plate-design cooler efficiently forces the hot oil through a series of aluminium pressed plates.

    £687.96 - £719.41

  • AIRTEC MOTORSPORT OIL COOLER KIT FOR HONDA CIVIC FK8 TYPE R - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL COOLER KIT FOR HONDA CIVIC FK8 TYPE R

    AIRTEC Motorsport Oil Cooler Kit for Honda Civic FK8 Type R As part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is proud to launch our oil cooler kit suitable for track or fast road use. AIRTEC part no: ATMSFK802 TECHNICAL DATA AIRTEC Motorsport Oil Cooler Kit for Honda Civic FK8 Type R As part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is proud to launch our oil cooler kit suitable for track or fast road use. Following an extensive development process, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Type R for track or fast road use. Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. With limited space, the challenge with this kit was to integrate a large capacity, external oil cooler neatly behind the bumper where it could still benefit from a direct airflow, whilst integrating seamlessly with the car’s existing fixtures and fittings with no drilling or cutting required. As a result, we have developed a kit that is completely reversible if need be. The comprehensive package includes a tried and tested 13-row AIRTEC oil cooler, bespoke laser-cut and powder-coated AIRTEC bracket, high quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. To ensure the maximum amount of air flow, we recommend removing the near side fog light and/or installing the exit vent into the wheel arch liner to provide better flow. However, these are not essential and the oil cooler will still work fine using the bumper’s original intake slots. Its increased cooling efficiency and easy fitment makes it an essential modification for all modified FK8 Type R models. Key features: Designed and developed in the UK Reduces temperatures on track and road Proven AIRTEC large capacity oil cooler Bespoke laser-cut and powder-coated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions Registered Design Right number: AIRTEC part no: ATMSFK802

    £407.90

  • AIRTEC MOTORSPORT OIL COOLER KIT FOR TOYOTA YARIS GR - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL COOLER KIT FOR TOYOTA YARIS GR

    Following an extensive development process, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Yaris GR owners who struggle to maintain steady oil temperatures on track, or during fast road use. AIRTEC Part No: ATMSYGR04 TECHNICAL DATA AIRTEC Motorsport Oil Cooler Kit for Toyota Yaris GR. Following an extensive development process, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Yaris GR owners who struggle to maintain steady oil temperatures on track, or during fast road use. Our kit has been designed in the UK after thorough research and huge experience in developing uprated oil cooler packages for a variety of modified track and road cars. The challenge with this kit was to integrate a large capacity, external oil cooler mounted neatly behind the grille for direct airflow, whilst integrating seamlessly with the car’s existing fixtures and fittings with no drilling or cutting required. As a result, we have developed a kit that is completely reversible if need be. The comprehensive package includes a tried and tested 13-row AIRTEC oil cooler, bespoke laser-cut and powdercoated AIRTEC brackets, high quality braided hose lines with Aerotec fittings, and all fixtures, including instructions, for a simple bolt-on installation. Its cooling efficiency and easy fitment makes it an essential modification for all modified Yaris GR’s. Key features: Designed and developed in the UK No cutting or drilling required to fit Reduces temperatures on track and road Proven AIRTEC large capacity external oil cooler Bespoke laser-cut and powder coated brackets High-quality hoses and fittings Comprehensive kit with all fixtures, fittings and instructions Registered Design Right numbers:  AIRTEC part no: ATMSYGR04

    £385.82

  • Oil Cooler Kit for Hyundai i30N - Car Enhancements UK

    forge Motorsport Forge Motorsport - Oil Cooler Kit for Hyundai i30N

    Developed from our direct involvement within the BTCC and Mini Challenge race series where we have provided race proven cooling packages, we have directly transferred our knowledge from this over to our road going products. FMOC11 has been developed with the same engineering expertise that is applied to our Mini Challenge Oil coolers, these see extensive driving over the race season calendar, so we are proud to give the I30N the same motorsport treatment. Lowering your oil temps on and off the track whilst providing a product that does not skimp on quality, so much so that it is backed by our Forge Lifetime Guarantee* With our extensive range of performance parts out on the market allowing the limits of the i30N/Veloster N to be pushed in the chase for top power gains, the addition of power and speed creates heat. Rising oil temperatures will result in only one outcome, a reduction of sufficient lubrication of your engines internal components. Therefore, the FMOC11 is a must have product for the keen driver, the location of the oil cooler radiator at the front of the vehicle’s radiator grill allows for superior air flow. During our development of this product we have seen oil temperatures reduced significantly. The Hyundai oil cooler has its inlet and outlets placed in the correct position for optimum flow , when oil coolers are fitted upside-down this can lead to cavitation (air locks) within the system, this can over a prolonged period of time lead to engine fatigue and potentially internal component damage due to insufficient engine lubrication. Unlike many oil cooler kits, the FMOC11 keeps the factory oil to water cooler in position. This essentially doubles your engines oil cooling. We’ve also developed the kit to use a bespoke laser cut aluminium bracket which makes for perfect fitment to the i30N crash bar. Supplied with the kit are 2x pre-assembled, high quality double braided AN-8 oil lines. We’ve incorporated a thermostat that is built into the oil cooler sandwich plate, this has been set to open at 85C as this was observed to be the optimal working temperature of the oil cooler when testing, this means the engine is working at its most efficient oil temperature range however hard you push the vehicle.   The kit comes with the following: 1x Forge Aluminium sandwich plate1x Twin pass oil cooler 4x M6x20 fasteners4x M6 washers2x Oil lines 4x M6 Rubber Riv nuts1X M20x1.5 adaptorAll the fixings required    Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £568.07

  • Forge Motorsport - Oil Cooler for Fiat 500/595/695

    forge Motorsport Forge Motorsport - Oil Cooler for Fiat 500/595/695

    PLEASE NOTE: This Oil Cooler Kit has been designed for use in conjunction with the Forge Motorsport front mount intercooler (FMINT500). It will not fit with the OEM intercooler. Forge Motorsport cannot confirm fitment with any other manufacturers' aftermarket intercooler. The Forge Motorsport oil cooler kit for the Fiat 500/595/695 uses a custom fabricated oil cooler with a large core dimension of 165(w) x 200(h) x 47mm(d). Although there are lots of universal oil coolers on the market, this oil cooler has been specifically designed to fit perfectly in the Fiats OEM intercoolers location, The oil cooler is manufactured at Forge Motorsport’s HQ in Gloucestershire, England by our highly skilled fabricators and carries a lifetime warranty*.Sitting in full air flow and mounted correctly with the oil flowing into the top of the oil cooler and exiting though the lower outlet, this avoids any chance of cavitation occurring within the oil cooler. Many people mount their oil coolers incorrectly which in turn stops them from working as well as they could. The oil filter housing on modern Fiat engines does not allow for the previously common take off plates to fit under the filter and divert oil into an oil cooler mounted elsewhere on the vehicle. Instead they now use an oil to water cooling ‘block’ bolted to the front of the engine, and in many cases an undersized filter or a paper drop in element, which prevents easy fitting of an oil cooler. As many people have found, if the vehicle is tuned or driven hard, oil temperatures can rocket to over 120°C (250°F) being easily achieved, which is close to the point that engine oil starts to break down. Therefore, it is essential to fit a Forge Motorsport oil cooler to your modified Fiat 500. Forge Motorsport have designed a CNC machined billet adaptor that replaces the oil to water cooling block. Although it still allows coolant to circulate, it more importantly offers two AN-10 take offs which allow fitment of the supplied oil cooler lines between the cooler itself and the Fiats engine oil galleries. In turn, this means oil temperatures can be significantly reduced resulting in an engine that can be worked harder for longer. The whole oil cooler unit has been designed to use the OEM intercoolers ducting to ensure maximum airflow is achieved creating the most superior oil kit on the market that is 100% plug and play. Perfect for track and fast road use on any Fiat 500.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £703.84

  • Forge Motorsport - Engine Oil Cooler for the Audi RS4 4.2 (B7 2006-2008)

    forge Motorsport Forge Motorsport - Engine Oil Cooler for the Audi RS4 4.2 (B7 2006-2008)

    This kit has been designed to address the weakness of the stock oil cooler – the cooler fitted to your car from Audi is aluminium, but the fittings on the ends of the cooler hoses are steel. The result is corrosion between the two different metals which cracks the fittings over time, causing a slow oil leak that gets worse with age, and eventually ends in a catastrophic failure of the oil cooler lines - and if you are unlucky, the engine too. Due to the corrosion setting in on the lines, they usually cannot be removed from the oil cooler without damaging it. This results in the need for the oil cooler and both lines to be replaced at a cost of over £1100 from the dealer, before you factor in consumables and labour to change the parts. Our solution uses tried and test products. It is a full replacement right from the fitting on the engine block which is precision made from 6082 billet aluminium, and then anodised to prevent any possibility of corrosion. This fitting leads to -12 AN Hose Technik black anodised aluminium fittings on Hose Technik braided lines with black overbraid. Cooling is accomplished by a 19 row Setrab oil cooler, the same manufacturer that supplies Audi and several F1 teams, again with a black finish. All the mating parts are similar materials and are tried and tested in Motorsport - there is no fear of corrosion affecting the fittings after a few years of use. The cooler is supported on a laser cut and powder coated frame that also holds the Audi fan control module in place. With everything finished in black, it makes for the ultimate stealth installation and unless you know what you are looking for, you won’t see it. The original remit of this replacement was to do away with all the troublesome Audi parts, which this kit accomplishes, but by relocating the oil cooler slightly higher than stock, we have also reduced the chances of damage from road debris. All parts needed for installation are included - bolts, nuts, washers, brackets, and full instructions, though you will need up to additional 2 litres of engine oil to account for the loss from removing your old oil cooler, and for filling the new cooler and lines.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £1,101.59

  • Forge Motorsport - Oil Cooler Kit for VW T5.1 Twin Turbo

    forge Motorsport Forge Motorsport - Oil Cooler Kit for VW T5.1 Twin Turbo

    This Oil Cooler kit has been specifically designed to fit the VW T5.1 fitted with the twin turbo diesel engine (180hp). The kit includes a filter sandwich adaptor which incorporates a thermostat, so that the additional cooling only takes place when required. The kit also includes a 13 row oil cooler and braided oil hoses, mounting brackets, and everything else required. Please note: This product can only be installed in combination with our Intercooler FMINTVWT52 This kit is ideally suited to tuned vehicles or those that will experience extended periods of additional load e.g. when towing, or when operating in warm climates. The additional cooling will help improve engine longevity and may also ensure greater reliability.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

    £469.58

  • Forge Motorsport - VW, Audi, Skoda, and Seat 1.6TDi and 2.0TDi Oil Cooler Take-Off Plate

    forge Motorsport Forge Motorsport - VW, Audi, Skoda, and Seat 1.6TDi and 2.0TDi Oil Cooler Take-Off Plate

    The oil filter housing on modern VAG engines does not allow for the previously common takeoff plates to fit under the filter and divert oil into an oil cooler mounted elsewhere on the vehicle. Instead they now use a oil to water cooling ‘block’ bolted to the front of the engine, and in many cases an undersize filter, or a paper drop in element, which prevents easy fitting of an oil cooler. As many people have found, if the vehicle is tuned, or if it is towing a heavy load, oil temperatures can rocket, with oil temperatures over 120°C (250°F) being easily achieved, which is close to the point that engine oil starts to break down. The Forge Motorsport FMOC2 replaces the oil to water cooling block, and although it still allows coolant to circulate, it more importantly gives two M22 takeoffs which, when fitted with the appropriate adaptor, allow fitment of oil cooler lines between an -6 and an -10 in size which can then be attached to an external oil cooler. Oil temperatures are stabilised, and engines can be worked harder for longer. To confirm fitment, please check the list of compatible vehilces below. This plate replaces the VAG OEM Part No. 03L 117 021 C. It fits ALL of the 2.0TDi and 1.6 TDi engines in the vehicles listed below. VW 2010-on Amarok, 2012-on Beetle, 2010-on Caddy, 2012-on CC, 2012-on Crafter, 2011-2016 Eos, 2012-on Golf Cabriolet, 2009-on Golf, 2009-2014 Golf Plus, 2011-on Jetta, 2011-on Passat, 2010-on Polo, 2009-on Scirocco, 2008-on Tiguan, 2011-on Touran, and 2010-on Transporter Audi 2011-on A1, 2009-2013 A3, 2008-on A4, 2012-on A5, 2011-on A6, 2012-on Q3, 2009-on Q5, and 2011-on TT Skoda 2011-on Fabia, 2009-on Octavia, 2012-on Rapid, 2011-on Roomster, 2008-on Superb, and 2010-on Yeti Seat 2011-on Alhambra, 2007-on Altea, 2009-on Exeo, 2009-on Ibiza, 2011-on Leon, and 2013-on Tolde   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Cars

    £147.66

  • AIRTEC MOTORSPORT REMOTE OIL COOLER KIT FOR VOLKSWAGEN GOLF MK7 R - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT REMOTE OIL COOLER KIT FOR VOLKSWAGEN GOLF MK7 R

    TECHNICAL DATA AIRTEC Motorsport Oil Cooler Kit for Mk7 Golf R   Following an extensive development process over the past year, AIRTEC Motorsport are proud to launch its new oil cooler kit aimed at modified Golf R owners who struggle to maintain steady oil temperatures on track, or during fast road use.   Our kit has been designed in the UK after thorough research. The challenge was to integrate a large capacity, external oil-cooler, mounted behind the grille for direct airflow. This would replace the basic OEM oil heat-exchanger but would still integrate seamlessly by utilising the car’s original oil take-off fittings.   The comprehensive package we subsequently developed includes AIRTEC Motorsport’s CNC, billet take-off adapter, an AIRTEC oil cooler, a laser-cut oil cooler bracket, high quality braided hose lines with Aerotec fittings and all fixtures and fittings including instructions, for a bolt-on installation.   The kit has undergone extensive testing on race tracks throughout Europe to ensure engine running temperatures remain low and steady in a variety of different climates. Testing showed that even under heavy and continuous track use, oil temperatures continually remained below 110 degrees Celsius, where previously the engine would see peak temperatures as high as 127 degrees Celsius under the same circumstances.   Its proven cooling efficiency and fitment makes it an essential modification for all modified Golf Rs.   Key features: Proven to reduce temperatures on track and road Designed and developed in the UK Comprehensive kit with all fixtures, fittings and instructions AIRTEC large capacity external oil cooler CNC custom made billet take-off Laser cut bracket High-quality hose and fittings Bolt-on installation AIRTEC part no: ATMSVAG5

    £480.13

  • AIRTEC MOTORSPORT OIL COOLER KIT FOR VOLVO C30 T5 - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL COOLER KIT FOR VOLVO C30 T5

    TECHNICAL DATA AIRTEC Motorsport are proud to offer the oil cooler kit for the Volvo C30 T5. Long overdue but it’s been worth the wait, making every part of our AIRTEC Motorsport oil cooler kit unique and finished to a stunning level of quality. Grill mounted to achieve maximum cold air flow. Kit Includes. 13 row high performance AIRTEC motorsport oil cooler Aeroquip 90 degree Black anodised fittings with Black Pro-Lite Oil hose Billets anodised Black hose line separators x 2 Gearbox mounted hose securing bracket finished in Pro-Series Black Today’s high performance vehicles pack a lot of power in a smaller package. In order to save both weight and space, the typical OEM cooling system is designed for normal driving conditions. When driven hard for extended periods, the cooling system may prove less than adequate. AIRTEC offers the solution to marginal cooling systems race proven lightweight and efficient oil coolers designed to fit in the smallest practical space. AIRTEC part no: ATOILVOL1

    £358.58

  • AIRTEC MOTORSPORT OIL COOLER KIT FOR ASTRA H VXR - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL COOLER KIT FOR ASTRA H VXR

    TECHNICAL DATA AIRTEC Motorsport oil cooler kit for Astra H VXR.Designed and developed in house at AIRTEC HQ this makes our oil cooler kit unique and finished to a stunning level of quality.Grill mounted to achieve maximum cold airflow and fits either side of grill as not to affect cold air feed for air filters. Kit Includes. 13 row high performance AIRTEC motorsport oil cooler Aeroquip -8 90 & 45 degree Black anodised fittings with Black Pro-Lite Oil hose Gearbox mounted hose securing bracket finished in ProSeries Black Designed to fit with AIRTEC stage 3 intercooler & supplied with a bracket for cars running standard or other aftermarket intercooler!Today’s high performance vehicles pack a lot of power in a smaller package.In order to save both weight and space, the typical OEM cooling system is designed for “normal” driving conditions.When driven hard for extended periods, the cooling system may prove less than adequate.AIRTEC offers the solution to marginal cooling systems—race proven lightweight and efficient oil coolers designed to fit in the smallest practical space.

    £358.58 - £419.35

  • AIRTEC OIL COOLER ADAPTOR PLATE ONLY FOR MINI COOPER S R53 - Car Enhancements UK

    Airtec AIRTEC OIL COOLER ADAPTOR PLATE ONLY FOR MINI COOPER S R53

    TECHNICAL DATA AIRTEC Mini R53 Cooper S Oil Cooler ADAPTOR PLATE ONLY – Oil cooler ADAPTER PLATE – If you want to add an oil cooler to your Gen 1 MINI but do not fancy installing a full kit, here is our AIRTEC adapter plate that allows you to tap into the existing oil system. Comes with #10 fittings. Fits 2003-2006 R53 MINI Cooper S Hatchback with Manual Transmissions.

    £72.87

  • AIRTEC OIL COOLER KIT WITH OR WITHOUT THERMOSTAT FOR MINI COOPER S R53 - Car Enhancements UK

    Airtec AIRTEC OIL COOLER KIT WITH OR WITHOUT THERMOSTAT FOR MINI COOPER S R53

    TECHNICAL DATA The new AIRTEC oil cooler kit for R53 Supercharged Mini’s is a must mod for all modified cars Perfect for Fast Road and Track, keep those oil temps in check Features Earl’s temp ‘a’ cool oil cooler Powder coated Black AIRTEC logo securing bracket with fixings Satin Black High pressure oil lines Anodised Black Aero style fixing (made by Aerotec) Genuine Mocal thermostat Billet oil line separators Billet alloy oil adaptor plate ONLY AVAILABLE IN BLACK DOES NOT FIT WITH AIRTEC FRONT MOUNT INTERCOOLER KIT Airtec Part No: ATOILMINI1 

    £358.58 - £419.35

  • AIRTEC MOTORSPORT OIL CATCH CAN KIT FOR HYUNDAI I30N - Car Enhancements UK

    Airtec AIRTEC MOTORSPORT OIL CATCH CAN KIT FOR HYUNDAI I30N

    AIRTEC Motorsport Oil Catch Can Kit for Hyundai i30N Essential upgrade for any direct injection car, the oil catch can is designed to collect oil and moisture passing through the vacuum system, minimising the build up of carbon on the back of the inlet valves. Designed with a dipstick allowing you to check the oil level inside the catch can so you know when to drain it. Supplied with step-by-step instructions giving this an easy DIY install, taking less than 30 minutes to fit. Features: Baffled oil catch can Oil level dipstick Three Pro Hoses silicone hoses Step-by-step fitting guide Billet fitting brackets Helps reduce carbon build-up on intake valves Will fit with standard or AIRTEC Motorsport i30N Header Tank Registered Design Right number: 6082523

    £273.43

Login

Forgot your password?

Don't have an account yet?
Create account