Performance - Audi RS3 8V (2012-2020)

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!

Read more less

High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!  

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Downpipe (GPF removed) Removes OE catalyst and GPF - for either De-Cat or Sports Cat Fits GPF Models Only For Motorsport Use Only Pipe Diameter: 100mm/4" Notes: Engine management light will be activated, Stage 2 ECU remap required FITS: RS3 8V Sportback 19-20 Facelift GPF Model TT RS MK3 GPF Model RS3 8V Saloon/Sedan 19-20 GPF Model RS3 8Y Saloon/Sedan 21-Current GPF Model RS3 8Y Sportback 21-Current GPF Model PRODUCT INFORMATION Pipe Diameter 100mm/4" Notes Engine management light will be activated, Stage 2 ECU remap required Year To 2019 on Fits To OEM / Scorpion EC Approved NO Black Ceramic Tailpipe NO CARB Compliant (American Market Only) NO OEWeight(KG) 13.5 ScorpionWeight(KG) 6.63 Scorpion Exhausts - Hand Crafted Performance Car Exhausts Scorpion exhausts look the way they do in order to perform the way they must. Thankfully that no-compromise performance driven approach means stunning welding and forming craftsmanship, the finest grade materials, and beautiful designs. Turn the key and you get even more. Not just that unmistakable Scorpion soundtrack, but something else; something no other exhaust brand can give you. Red Power - the way a Scorpion exhaust feels, and makes you feel. The sum of a rich heritage of racing, development and innovation gives you a system sure to turn heads, but also one which feels amazing! If you are upgrading your exhaust, insist on the enthusiasts’ brand. Proven to perform at the very highest level. Built to stir your soul. TAKING ACOUSTICS TO THE NEXT LEVEL As with all Scorpion’s high performance products interchange ability with O.E systems are a priority, which is why Scorpion have developed solutions for both the earlier generation of vacuum exhaust valves as well as the latest generation. Scorpion Stainless Steel Performance Exhausts Life Time Guarantee For The First Purchase (Excluding Cats & Flexes) High Quality Type-304 Aircraft Grade Stainless Steel Over 25 Years of Continuous Exhaust Development and Technical Expertise Hand Crafted Performance Exhausts Designed & Made in The UK Substantial Weight Saving Over Original Equipment Exhaust Systems

Read more less

Fits Audi RS3 (8V) Sportsback (2015-17) with the engine Code CZGB (2.5 TFSI Quattro) Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi RS3 performance exhaust is made in stainless steel pipework and replaces the primary catalyst (Cat Bypass). This de-cat exhaust is sold for motorsport and off road use only worldwide. All relevant fittings and gaskets are supplied (Except turbo gasket). Media British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi RS3 performance exhaust is made in 2.5"/63.5mm bore pipework and replaces the secondary catalyst (Cat Bypass). This de-cat exhaust is sold for motorsport and off road use only worldwide. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. All relevant fittings and gaskets are supplied. Media Example of the Audi RS3 8V Performance Exhausts (Secondary Catalyst Delete Pipes).

Read more less

Want to tighten your grip on the road? Scorpion’s lightweight aluminium chassis braces tick all the boxes. The single-piece manufacturing process ensures a high-strength connection under load. Braces are powder-coated black and etched with the Scorpion mark.Our underbody bracing reduces performance loss due to chassis twist during hard braking or cornering. Enhanced body rigidity translates to a more direct feel with the road surface. (Fits both the Scorpion and OEM pipework.) FITS: AUDI  RS3 8V Saloon/Sedan 17-18 Non-GPF Model RS3 8V Saloon/Sedan 19-20 GPF Model RS3 8V Sportback 15-17 PFL RS3 8V Sportback 17-18 Facelift Non-GPF Model RS3 8V Sportback 19-20 Facelift GPF Model S3 2.0T 8V (3 Door & Sportback) Facelift GPF Model S3 2.0T 8V (3 Door & Sportback) Facelift Non-GPF Model S3 2.0T 8V (3 Door & Sportback) PFL S3 2.0T 8V (Saloon) Facelift GPF Model S3 2.0T 8V (Saloon) Facelift Non-GPF Model S3 2.0T 8V (Saloon) PFL S3 2.0T 8Y Quattro (Saloon) GPF Model S3 2.0T 8Y Quattro (Saloon) ROW S3 2.0TFSi 8Y Quattro (Sportback) GPF Model S3 2.0TFSI 8Y Quattro (Sportback) ROW SQ2 19-24 TT MK3 2.0TFSi Quattro Non GPF Model TT RS MK3 GPF Model TT RS MK3 Non GPF Model TT S MK3 Coupe Non-GPF Model CUPRA Formentor 2.0 TSI 4Drive Leon 245 GPF Model Leon 245 ROW Ateca SEAT Leon Cupra 2.0 TSI 280, 290 & 300 Non GPF Model Leon Cupra 2.0 TSI 280/290 ST Leon Cupra 2.0 TSI 290 GPF Model Leon Cupra ST 300 4Drive (GPF Model) Leon Cupra ST 4Drive Carbon Edition SKODA Octavia vRS 2.0 Tsi VW MK7 Golf Estate R (pre facelift) MK7 Golf GTi (including Clubsport & Clubsport S) MK7 Golf R (pre facelift) MK7 GTD MK7.5 Golf Estate R (facelift) GPF Model MK7.5 Golf Estate R (facelift) Non GPF Model MK7.5 Golf GTi (Non-GPF Model) MK7.5 Golf GTi (TCR & GPF Models) MK7.5 Golf R (facelift) GPF Model MK7.5 Golf R (facelift) Non GPF Model MK8 Golf GTI Clubsport GPF Model MK8 Golf GTI Clubsport ROW MK8 Golf GTI GPF Model MK8 Golf GTI ROW MK8 Golf R GPF Model MK8 Golf R ROW

Read more less

FITS: Audi RS3 Sportback (8V MQB - Pre Facelift Only) 2015 to 2017 Audi RS3 Sportback 400PS (8V MQB - Facelift Only) - Non-OPF/GPF Models 2017 to 2018 Audi RS3 Saloon / Sedan 400PS (8V MQB) - Non-OPF/GPF Models 2017 and Later Audi RS3 Saloon/Sedan 400PS (8Y MQB EVO) - Non-OPF/GPF Models 2022 and Later Audi TT Mk3 TTRS 2.5TFSI Quattro (Non-OPF/GPF Models) 2016 and Later NOTES: Large-bore Downpipe and De-catFits both OE and Milltek Sport Cat Back Systems - NOTE to Customers - Due to Design of Turbo Waste Gate fitting a decat can cause metallic rattle to be heard more than the OE Cat Downpipe Large-bore Downpipe and De-catV2 Downpipe with Decat - Fits both OE and Milltek Sport Cat Back Systems - NOTE to Customers - Due to Design of Turbo Waste Gate fitting a decat can cause metallic rattle to be heard more than the OE Cat Downpipe Large Bore Downpipe and Hi-Flow Sports CatFits both OE and Milltek Sport Cat Back Systems - NOTE to Customers - Due to Design of Turbo Waste Gate fitting a decat can cause metallic rattle to be heard more than the OE Cat Downpipe Secondary Catalyst BypassFits both OE and Milltek Sport Cat Back Systems, Not required on Turbo Back System *** Not all vehicles come equipped with secondary cats, visual check recommended before ordering *** (Non-OPF/GPF Models Only) Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU727 Large-bore Downpipe and De-cat-Fits both OE and Milltek Sport Cat Back Systems 76.2 3 Yes No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Valve delete module - plugs into exhaust valve plug when a vehicle is fitted with a none valved system Please note, this product fits multiple models. Cupra Ateca S3 2.0T 8V (3 Door & Sportback) PFLS3 2.0T 8V (Saloon) PFLMK7 Golf R (pre facelift)RS3 8V Sportback 15-17 PFLTT S MK3 Coupe Non GPF ModelMK7.5 Golf R (facelift) Non GPF ModelMK7.5 Golf R (facelift) GPF ModelSQ2 19-24MK8 Golf R GPF ModelS3 2.0TFSi 8Y Quattro (Sportback) GPF ModelFormentor 2.0 TSI 4DriveS3 2.0T 8V (Saloon) Facelift GPF ModelS3 2.0T 8V (Saloon) Facelift Non-GPF ModelS3 2.0T 8V (3 Door & Sportback) Facelift Non-GPF ModelS3 2.0T 8V (3 Door & Sportback) Facelift GPF ModelS3 2.0T 8Y Quattro (Saloon) GPF ModelS3 2.0TFSI 8Y Quattro (sportback) ROWS3 2.0T 8Y Quattro (saloon) ROWMK8 Golf R ROW

Read more less

FITS: Audi RS3 Saloon / Sedan 400PS (8V MQB) - Non-OPF/GPF Models 2017 and Later Audi RS3 Saloon / Sedan 400PS (8V MQB) - OPF/GPF Models 2019 and Later   Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU896 80mm Non-Resonated Cat Back with Burnt Titanium Trims 80 3.15 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

FITS: Audi RS3 Sportback 400PS (8V MQB - Facelift Only) - Non-OPF/GPF Models 2017 to 2018 Audi RS3 Sportback 400PS (8V MQB - Facelift Only) - OPF/GPF Models 2019 and Later Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU887 80mm Non-Resonated Cat Back with Burnt Titanium Trims 80 3.15 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

NON-VALVED Resonated Cat Back System With Polished Oval Trims Part No. Description Tailpipe Pipe Diameter Race EC MSVALVEDEL x2 Valve Delete Module MSAU677 Front Silencer Assembly 3.00" (76.20mm) MSAU714 Non Valved Rear Silencer MSTIP146 LH Polished Tip 150 X 95mm Polish Oval MSTIP147 RH Polished Tip 150 X 95mm Polish Oval Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

NON-VALVED Resonated Cat Back System With Cerakote Black Oval Trims Part No. Description Tailpipe Pipe Diameter Race EC MSVALVEDEL x2 Valve Delete Module MSAU677 Front Silencer Assembly 3.00" (76.20mm) MSAU714 Non Valved Rear Silencer MSTIP144 LH Black Tip 150 X 95mm Black Oval MSTIP145 RH Black Tip 150 X 95mm Black Oval Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

NON-VALVED Cat Back System Non-Resonated (Louder) With Polished Oval Trims Part No. Description Tailpipe Pipe Diameter Race EC MSVALVEDEL x2 Valve Delete Module MSAU677REP Front Silencer Bypass 3.00" (76.20mm) MSAU714 Non Valved Rear Silencer MSTIP146 LH Polished Tip 150 X 95mm Polish Oval MSTIP147 RH Polished Tip 150 X 95mm Polish Oval Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

NON-VALVED Cat Back System Non-Resonated (Louder) With Cerakote Black Oval Trims Part No. Description Tailpipe Pipe Diameter Race EC MSVALVEDEL x2 Valve Delete Module MSAU677REP Front Silencer Bypass 3.00" (76.20mm) MSAU714 Non Valved Rear Silencer MSTIP144 LH Black Tip 150 X 95mm Black Oval MSTIP145 RH Black Tip 150 X 95mm Black Oval Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Audi RS3 Sportback (8V MQB - Pre Facelift Only) 2015 to 2017 Part No. Description Tailpipe Pipe Diameter Race EC MSAU677REP Front Silencer Bypass 3.00" (76.20mm) MSAU678 Rear Silencer featuring HollowTek Technology {Re-uses Electronic Valves from OE System} MSTIP144 LH Black Tip 150 X 95mm Black Oval MSTIP145 RH Black Tip 150 X 95mm Black Oval Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

 This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Audi RS3 Sportback (8V MQB - Pre Facelift Only) 2015 to 2017 Part No. Description Tailpipe Pipe Diameter Race EC MSAU679 100mm Hi-Flow Turbo Elbow 3.00" (76.20mm) MSAU680 High Flow 200cpsi Cat Assembly            Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Active Valve Control (AVC) is available to support both vehicles equipped with factory valves on the exhaust as well as a growing range of upgrades Milltek Sport offers to have performance exhaust systems with Valve Control. Also with optional App control on selected models, via iPhone or Android smartphone app’s, AVC brings total control of the exhaust to the drivers finger tips, via full CAN BUS integration with built in safety controls, Milltek’s AVC enables the driver to choose when the valves open and close to tune the sound and volume of the exhaust.       All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.   COMPATIBLE WITH: Audi > RS3 > 8V (2015 - Present) > Sportback (Pre Facelift Only)Audi > TT > Mk3 (2014 - Present) > TTRS 2.5TFSI QuattroAudi > RS3 > 8V (2015 - Present) > Saloon | Sedan 400PS (Non OPF GPF Models)Audi > RS3 > 8V (2015 - Present) > Sportback 400PS (Facelift) Non GPF OPF ModelsAudi > RS3 > 8V (2015 - Present) > Saloon | Sedan 400PS (OPF GPF Models Only)Audi > RS3 > 8V (2015 - Present) > Sportback 400PS (Facelift) OPF GPF ModelsAudi > TT > Mk3 (2014 - Present) > TTRS 2.5TFSI Quattro (OPF GPF Models)  

Read more less

NON-VALVED Resonated Cat Back System With Polished Oval Trims Part No. Description Tailpipe Pipe Diameter Race EC MSVALVEDEL x2 Valve Delete Module MSAU677 Front Silencer Assembly 3.00" (76.20mm) MSAU714 Non Valved Rear Silencer MSTIP146 LH Polished Tip 150 X 95mm Polish Oval MSTIP147 RH Polished Tip 150 X 95mm Polish Oval Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

NON-VALVED Resonated Cat Back System With Cerakote Black Oval Trims Part No. Description Tailpipe Pipe Diameter Race EC MSVALVEDEL x2 Valve Delete Module MSAU677 Front Silencer Assembly 3.00" (76.20mm) MSAU714 Non Valved Rear Silencer MSTIP144 LH Black Tip 150 X 95mm Black Oval MSTIP145 RH Black Tip 150 X 95mm Black Oval Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

NON-VALVED Cat Back System Non-Resonated (Louder) With Polished Oval Trims Part No. Description Tailpipe Pipe Diameter Race EC MSVALVEDEL x2 Valve Delete Module MSAU677REP Front Silencer Bypass 3.00" (76.20mm) MSAU714 Non Valved Rear Silencer MSTIP146 LH Polished Tip 150 X 95mm Polish Oval MSTIP147 RH Polished Tip 150 X 95mm Polish Oval Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

NON-VALVED Cat Back System Non-Resonated (Louder) With Cerakote Black Oval Trims Part No. Description Tailpipe Pipe Diameter Race EC MSVALVEDEL x2 Valve Delete Module MSAU677REP Front Silencer Bypass 3.00" (76.20mm) MSAU714 Non Valved Rear Silencer MSTIP144 LH Black Tip 150 X 95mm Black Oval MSTIP145 RH Black Tip 150 X 95mm Black Oval Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less