Performance - Audi RS3 8V (2012-2020)

RacingLine Rear Wiper Delete Kit Stripping weight out of your track car? Prefer that clean, uncluttered look without the rear wiper? Then this Rear Wiper Delete kit is for you…. Unlike some wiper deletes, our design sits fully flush with the glass, making it near-invisible once fitted. The single-piece design is CNC-machined from Type-6061 Billet Aluminium, with the RacingLine logo delicately machined in. The glossy surface is hand-polishing, before being anodised in gloss midnight black for a long-lasting finish that blends almost invisibly with the rear screen. The kit is supplied with a RTV Silicone sealant for simple DIY fitment from the inside of the window, ensuring a strong, waterproof install. What’s included? Wiper Delete RTV Silicone Sealant Confirmed Applications Multiple applications for any car with a 26.5mm hole opening, meaning fitment for just about every modern Volkswagen Group car with a rear wiper. (See vehicle compatibility) Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR810000

Read more less

Stage 3 Forged MonoblockPerformance Big Brake Kitfor VW/Audi/Cupra/Skoda Our Stage 3 Forged Monoblock 6-piston Big Brake upgrade is simply a level above anything else on the market. Designed without compromise for ultimate stopping performance, it's packed with motorsport-inspired features, bringing a true supercar look and feel in the braking department Why upgrade? The RacingLine Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.   Our design vision was made possible by our advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail. Each lightweight Forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits. The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing. Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent. The kit offers a choice of 355mm or 380mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. Whichdisc/rotor size? 380mm DISCS/ROTORS: Minimum 19" wheel diameter required. 355mm DISCS/ROTORS: Minimum 18" wheel diameter required​.   MONOBLOCK The 'Forged Monoblock' construction of our 6-piston aluminium thin-profile calipers give extreme stiffness and light weight, and aid in wheel clearance packaging. DISC QUALITY Two-piece floating high cast carbon discs - a mixture of high quality steel combined with carbon; giving a far higher friction coefficient compared to normal steel rotors. In either 355mm or 380mm diameter, 32mm thickness. FULLY-FLOATING Fully floating mounting between disc and bell allow for thermal expansion and contraction to avoid cracking. The anti-rattle mounts keep it quiet.  VWG-SPECIFIC As our kit is engineered exclusively for VWG cars, we've developed piston sizes perfectly matched to master cylinders and servos for beautiful progressive pedal response.   PAD CHOICE Composite Ceramic Fast-Road Pads are included. We use a generic pad size, meaning a wide choice of pad brands & compounds are available if you're planning hard track use.  FULL INSTALL KIT Everything you need for installation: discs, callipers, mounting brackets, fast road pads, braided steel lines. Plus the option of Hub Adaptors for extra wheel clearance. Bolt on & drive!   Confirmed applications. 355mm x 32mm kit: Minimum 18" wheel diameter required​. 380mm x 32mm kit: Minimum 19" wheel diameter required​. Our Hub Adaptors recommended for use with factory wheels. MQB CARS 355mm VWR650001 RED/BLK/ANO/CHR/BLU 380mm VWR650000 RED/BLK/ANO/CHR/BLU > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ A5 PLATFORM 355mm VWR650002 RED/BLK/ANO/CHR/BLU 380mm VWR650003 RED/BLK/ANO/CHR/BLU > VW Golf 5 GTI 2005-2008 > VW Golf 5 R32 2005-2008 > VW Golf 5 GTI ED30/Pirelli 2006-2007 > VW Golf 6 GTI 2009-2014 > VW Golf 6 R 2009-2014 > VW Scirocco R 2009-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > SEAT Leon II Cupra/R 1P 2006-2012 > SEAT Leon II 1P 2005-2012 > Skoda Octavia II vRS 1Z 2004-2013 * Fitment of the Stage 3+ brake kit on 2.5 TFSI RS3 Sportback/Saloon or TTRS, requires shims between the bearing housing/upright and caliper mounting bracket to centralise the disc between the pad surfaces – failure to do so will cause caliper and rotor damage. Please check with your dealer before fitment.

Read more less

Stage 2 'EVO' MonoblockPerformance Big Brake Kit. Our new Stage 2 'EVO' Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it's the same pad as a Ferrari F40!).   Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. Why upgrade? All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 'EVO' Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars.   We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars.   MONOBLOCK The 'Monoblock' construction of our 4-piston aluminium thin-profile calipers give extreme stiffness and light weight, and aid in wheel clearance packaging (min 17" wheel). GROOVED & VENTED The 345mm x 30mm discs, with integral mounting bells, use our ‘Triple Groove’ design across the face for improved bite and debris clearance. DISC QUALITY A one-piece disc (rotor) made from high cast carbon - a mixture of high quality steel combined with carbon; giving a far higher friction coefficient compared to normal steel rotors. VWG-SPECIFIC Engineered exclusively for VWG cars, with piston sizes matched to master cylinders and servos for perfect responses and a beautiful pedal feel. SPORT PADS Composite Ceramic Sport Pads are included with the Stage 2 'EVO' kit with the ideal compound for fast-road use. The kit uses generic pad dimensions, meaning you can choose your ideal pad/brand. FULL INSTALL KIT Everything you need for installation: discs, callipers, mounting brackets, fast road pads, braided steel lines. Plus the option of Hub Adaptors for extra wheel clearance. Bolt on & drive Track use? This Stage 2 'EVO' kit has been developed as a highly effective fast road kit that also works for occasional track day usage. ​ However, if you're into regular heavy track use, this probably not the right kit for you! For track users, we strongly recommend our Stage 3 Forged Monoblock Brake Kit. BLACK CALIPER VWR652000-BLK VWR652003-BLK Sophisticated high gloss black RED CALIPER VWR652000-RED VWR652003-RED Colour matched to factory GTI BLUE CALIPER VWR652000-BLU VWR652003-BLU Colour matched to factory Golf 8R Hub Adaptors forperfect fitment. RacingLine’s brake kit features our unique design that allows these 5mm Hub Adaptors to be solidly, mechanically mounted onto the front face of the disc to give you that extra clearance. No more adding loose spacers onto your car (and approved in markets where spacers are illegal). ​ We recommend this 5mm Hub Adaptor for anyone using this brake kit under factory wheels. ​ PART NUMBER:  VWR620005MM Loseweight. Saving unsprung weight is really important on a performance car.    So we've spend a lot of our development and design time making sure that our 'EVO' Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving - as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers.   Confirmed applications. VWR652000 RED/BLK/BLU (MQB) > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ VWR652003 RED/BLK/BLU (A5 PLATFORM) > VW Golf 5 GTI 2005-2008 > VW Golf 5 R32 2005-2008 > VW Golf 5 GTI ED30/Pirelli 2006-2007 > VW Golf 6 GTI 2009-2014 > VW Golf 6 R 2009-2014 > VW Scirocco R 2009-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > SEAT Leon II Cupra/R 1P 2006-2012 > SEAT Leon II 1P 2005-2012 > Skoda Octavia II vRS 1Z 2004-2013

Read more less

TAKE THE PRESSURE. BEAUTIFUL BILLET REPLACEMENT EXPANSION CAP. Doesn't your pride and joy deserve better than cheap plastic parts in the engine bay?  WHY CHANGE? The RacingLine Coolant Expansion Tank Cap will keep your coolant expansion tank at its perfect pressure to be sure that your high-performance engine’s coolant system is performing exactly as it should.  The cap's a critical part of your car's cooling system to ensure that correct pressure is maintained, and never exceeded. Older, worn stock coolant caps loose the ability to hold correct pressure to keep the coolant at maximum efficiency. This is an engineered, billet replacement coolant cap to replace the cheap plastic one, with sophisticated internal springing and bleed off.  Don’t confuse this RacingLine full replacement cap with other cheap covers - which simply stick on over the plastic cap. We think your car deserves better than that. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC 5-axis technology. Each cap starts life as a solid billet of aerospace-quality 6061 aluminium. Sophisticated internal Japanese-made springing and bleed off mechanism. Polished, then gloss-anodised in stunning Midnight Black to stay beautiful for year after year. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 5 GTI 1.4 TSI 6R 2008-2015 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > VW ID.Buzz 2023+ > VW ID.4 2020+ > VW Amarok 2010-2020 > VW ID.3 2019+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Audi Q5 3.0 TDI II FY 2017+ > Audi Q4 E-tron 20210+ > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Arona 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Cupra Born 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Enyaq 2021+

Read more less

Replacement Brake Pads for the Racingline 'Stage 2 Evo' 4-Piston Calipers - Stock CompoundThese are designed for standard road use and light fast road use. These are the ones which come in the kit when new. Wear indicators are not fitted to these pads - Track CompoundThese are designed for heavy fast road use only and light track use. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators are not fitted to these pads - EBC Yellowstuff CompoundDesigned for fast road use and light track day use. These 'R90' Approved pads are road legal, and offer slightly lower dust levels than stock pads. Wear indicators cannot be fitted to these pads- Ferodo DS PerformanceThese are designed for standard road use and enthusiastic fast road use.These are probably the best all rounder available for this kit and suit the needs of most of our customer's for Non-Tracked vehicles.Wear indicators cannot be fitted to these pads- Ferodo DS2500 CompoundThese are designed for more aggressive fast road use and ocasional 'beginner' track days. They have the same bite from cold as the stock compound, but an extended heat range. Some additional 'pad noise' and brake dust will be noticedWear indicators cannot be fitted to these pads - Ferodo DS3000 CompoundThese are designed for Track use only. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators cannot be fitted to these pad- Pagid RSL-29 CompoundThese are designed for Track use only. They do not bite as well from cold, however they have a higher heat range and a better bite under temperature. Additional pad noise and brake dust will be noticed. Wear indicators cannot be fitted to these pads - EBC RP1 CompoundDesigned for vehicles that are driven hard on track, RP1 possesses a modeately high friction level of 0.45 between 100 and 750 Celcius. This compound is an ideal heavy track use compound for over servo'd vehicles such as the VAG range. Wear indicators cannot be fitted to these pads - Tarox Corsa CompoundThese are ideal for fairly aggressive fast road use and ocasional 'beginner' track days. They have a reasonably good bite from cold as the stock compound, but an extended heat range. Some additional 'pad noise' and brake dust will be noticedWear indicators cannot be fitted to these pads- Tarox Competizione CompoundThese are designed for Track use only. They don't bite great from cold, however they have a higher heat range and a really good bite once up to temperature. Additional 'pad noise' and brake dust will be noticed. Wear indicators cannot be fitted to these pad Do I have the Old kit, or the EVO Kit? We have included an image in our listing to help customers check if they have the Older kit or the EVO Kit. EVO Kit - The EVO Kit can be identified by the shape of the caliper pistons being highlighted in the extenal design of the caliper. As well as this, the EVO Kit has a brace bar running down the Length of the Caliper.  VWR0323

Read more less

FULL ALIGNMENT. KEEP YOUR ALIGNMENT WHERE IT SHOULD BE. Our new MQB RacingLine Subframe Alignment Bolt Collar kit cuts out the huge factory tolerances for accurate alignment each time, every time. WHAT'S THE PROBLEM? The RacingLine Alignment Bolt Collar kit is a simple ‘why not’ upgrade to eliminate the challenges caused by large tolerances in the factory subframe mounts, both front and rear.   The OEM subframe design uses really oversized bolt holes – giving a wide range of adjustments to shuffle the whole subframe assembly back and forth, side to side.   Whilst that may be ideal for dealers & repairers to lazily mask other misalignments in the chassis, it means that there are also huge opportunities for inaccuracy every time your subframes are refitted, not to mention the risk of the car’s alignment creeping out of tolerance with hard driving over time. WHAT IT DOES. Our precision-engineered, push-in Bolt Collars centralise the subframes by cutting out the huge hole tolerances, so perfectly centring the bolt locations every time you refit. The result? With correct alignment, you’ll keep precise steering, sharper handling and braking responses every time. By ensuring complete accuracy every time you refit your subframes, you’ll save time and cost by ensuring consistent, hassle-free alignment each time, every time.  With no need for alignments after refitting subframes in future, this really affordable upgrade will likely pay for itself many times over. No additional NVH transfer into the car and no more creaking mounts. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Full kit of 16x Bolt Collars for front and rear subframes High quality T6061 billet aluminium construction CNC construction, anodised gloss black to last Precision machining means tighter alignment specs  Simple, quick push-in fitment into OEM subframes No modification to subframe or car body is required, so fitment is completely reversible. CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq vRS 2018+

Read more less

Higher Output Ignition Coils.for all VW Group 2.0 TSI engines and bigger. RacingLine's Higher Output Ignition Coils deliver greater energy output, ensuring a stronger and more consistent spark. A simple plug-and-play upgrade over the OE factory coils. What dothey do? The RacingLine Higher Output Ignition Coils are a direct plug-and-play upgrade from your OE ignition coils. Whether your engine is standard or Stage 3 tuned, it will immediately benefit from the greater energy output and stronger, more consistent spark generated by a set of RacingLine Coil Packs. The RacingLine Higher Output Ignition Coils deliver a 10% increase in output energy versus OE. This greater output is perfect for drivers looking to maximise output from either their stock or modified car Why have we settled on a 10% gain in output energy for our Coil Packs? Because this is the optimum increase level for VWG's TSI engines. Beyond this, no additional benefit is gained, yet the coil's internal temperatures begin to rise sharply. So, at this level, our Coil Packs can maintain coil voltage under load with little or no drop-off, performing consistently from idle through to the shift point or red-line Replacement is all the more worthwhile on older engines still running the OE Coil Packs. A new set makes a great preventative maintenance upgrade to avoid the risk of misfires caused as the OE Coil Packs age and gradually break down. Fitment couldn't be easier. These are a simple plug and play replacement. Remove the OE Coil Packs, replace with our Higher Output versions. Three Colour choices: 'R' BLUE VWR900000 GTI RED VWR900001 NARDO GREY VWR900002 Sold individually - remember to order sets of four, five, six or eight as required.  Confirmed applications VWR900000 – BLUE  I   VWR900001 – RED  I  VWR900002 – GREY All vehicles fitted with the following engines: 1.8 TSI : EA888.3 2.0 TSI : EA888.3 & 3B 2.0 TSI : EA888.4  2.5 TFSI : EA855 EVO 3.0 V6 TFSI : EA839 2.9 V6 TFSI : EA839 4.0 V8 TFSI : EA825 ​ Sold individually.  Most popular models with these engines include: > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 6 AW 2017+ > Audi S1 2.0 TFSI 2015-2018 > Audi A1 GB 2019+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C8 2018+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C8 4K8 2018+ > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi A8 / S8 D5 2017+ > Audi A8 / S8 D4 2010-2017 > Audi Q8 4M8 50 TDI & 45 TDI 2018+ > Audi Q8 / SQ8 / RSQ8 4M8 2018+ > Audi Q7 / SQ7 4M 2016-2019 > Audi R8 2015+ > SEAT Ibiza Cupra 1.8TSI 6J 2017-2018 > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq 2018+ > Porsche Panamera 970 2010-2017 > Porsche Macan 2014+ > Porsche Cayenne 2019+ > Lamborghini Urus 2018-2021 > Bentley Bentayga 2016-2021

Read more less

Racingline Performance ‘R360’ 19″ Alloy Wheels The R360 takes all the attributes of our race wheels of strength, lightness and the peace of mind of UK manufacture – then adds in a large helping of style. Three luxurious finishes://  Gunmetal Grey//  Star Silver// Gloss Black *NEW* At 10.5kg, 23.15lb, each R360 weighs up to 2kg less than the OEM wheels. Produced to the highest specification in the UK to meet (and exceed) OEM standards and the reassurance of full TÜV international approval. Combining lightness, strength and a stunning OEM+ inspired 10 spoke design finished in a gloss gunmetal finish. Technical This 19″x 8.5″ rim has an offset of ET44. That’s perfect for all Golf 7 and other MQB-platform cars, together with the A5-platform cars (such as Golf 5/6 ) and other 5x112pcd VWG vehicles.  It looks simply perfect on these models, filling the arches to perfection. We recommend a tyre size of 235/35 R19 for these wheels to maintain wheel arch clearance.  Note that for Golf 5/6 applications, where arch clearance is tight we would recommend a 225/35 R19 tyre. Notes:* 8.5J x 19″* 5 x 112 PCD* ET44 Offset* Sold as a Set of 4x Alloy wheels* Also available individually – contact usfor details* Tyres not included but available as an extra – contact us for details SKU: VWR600360BLK

Read more less

The finishing touch for your RacingLine-equipped pride and joy. Our 100mm long OEM-quality car badge is just what is needed to differentiate your car from all the the rest.   This order is for a SINGLE car badge in your choice of Bright Chrome or Gloss Black. Each badge is made from high quality injection moulded ABS, supplied with strong 3M self-adhesive backing for simple fixing.

Read more less

ADJUSTABLE REAR DROPLINKS. RACE-PROVEN FOR YOUR ROAD CAR. The RacingLine Adjustable Rear Droplinks are an essential upgrade to any lowered or performance car WHAT THEY DO. Our Rear Sway Bar End Links replace the soft factory rubber bushings with their weak plastic bodies with these beautifully engineered adjustable aluminium billet replacements.Designed with one aim in mind: to help achieve optimum suspension performance and geometric accuracy, and thus increase the effectiveness of your rear anti-roll bar. Each heavy-duty, high-articulation rear droplink attaches the rear anti roll bar ends to the lower suspension arm. Replacing the failure-prone, weak plastic OEM links with our rigid billet aluminium links greatly reduces flex and allows a sharp, uncompromised transfer of suspension movement through to the sway bar. As well as the link itself, extra stiffness and precision comes from replacing the flex-prone stock plastic ball joint with motorsport-spec ball joints. An especially valuable upgrade on older, higher mileage cars. Fully adjustable by +/- 5mm to zero the pre-load on the anti-roll bar geometry. Clever design means that adjustment can be carried out at both ends whilst the droplinks are in-situ, making neutral positioning much easier.  Direct replacement – can be used with either factory or Aftermarket rear anti roll bar, and returned to standard at any time. ADJUSTABLE When you lower ride height, the geometry will now be adding preload to your anti roll bar. It's vital to adjust this back to neutral with the +/- 5mm adjustment built-in. PRECISE Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners. Increase durometer rubber bushing creates direct response for anti-roll bar under cornering conditions RACE-PROVEN Developed for our race cars - adjusting out the sway bar preload allows the anti roll bar to work within its correct operating envelope is an essential part of geometry set-up. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Motorsport-specification ball joint ends - high strength teflon-lined steel +/- 5mm of adjustable length with stainless steel insert to zero Anti Roll Bar preload  Increase durometer rubber bush to create direct response for anti-roll bar under cornering conditions Rubber dust boots fitted to protect the joints  Left / Right threaded ends make for easy length adjustment in-situ without having to detach and re-attach Lightweight CNC-machined 6061-T6 Aluminum bodies with beautiful gloss black anodised coating CONFIRMED APPLICATIONS VWR520000 (supplied as a pair) > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+

Read more less

Racingline Audi Paddle Shifters Please check the applications listed below. Cool, sharp and positive changes are guaranteed from our replacement S-Tronic blades for Audi B9 Platform A4/S4/RS4, A5/S5/RS5 S3/RS3/TTRS (flat bottomed). The new billet aluminium blades, unlike cheaper alternatives, completely replace the standard paddles. Look great, feel great with precision shifting. PERFORMANCE AT YOUR FINGERTIPSWe have extended the size of the paddles above and below the steering wheel spokes to make pulling that next gear easier in tight turns when your hands are busy steering. This ensures that your performance behind the wheel is never compromised. NEVER SETTLE FOR LESSThere are many cheap ‘stick-on’ paddles available. As a full replacement unit, the Racingline Performance Racingline Performance DSG Paddles are completely different. The ‘stick-ons’ rely on double-sided foam tape laid on top of the factory plastic paddles and this will never give the positivity or long term rigidity that car and driver deserve. EXQUISITE DETAIL AND EXCEPTIONAL QUALITYAs with all our upgrades, the quality and attention to detail on our Racingline Performance DSG Paddle Replacements is instantly apparent. The +/- symbols are delicately cut out of the top of each blade. Polished, then gloss-anodised in a choice of Piano Black or Titanium-Silver before a laser-etched Racingline logo is placed on the bottom of each blade as a discreet assurance of quality. SIMPLE FITTINGFitting Racingline Performance DSG Paddles couldn’t be easier. With long-nosed pliers, simply pull out the pin from underneath the standard paddle – and the paddle comes away. Position your new VWR DSG Paddle into place, slide the pin back in fully and you’re good to go. Note: Some steering wheel variations may require airbag removal, we advise professional fitting in these instances. Confirmed Applications (FOR A3/S3 WITH OPTION SPORT STEERING WHEEL) Audi S3 8V 2013-2020 Audi A3 8V 2013-2020 Audi RS3 2.5 TSI 8V evo 2017-2020 Audi TTS 3 2.0 TSI 8S 2015+ Audi TTRS 3 2.5 TSI 8S 2017+ Audi A4 B9 2015+ Audi A4 3.0 TDI B9 2015+ Audi S4 B9 2016+ Audi S4 TDI B9 2019+ Audi RS4 B9 2017+ Audi A5 B9 2016+ Audi A5 3.0 TDI B9 2016+ Audi S5 B9 2016+ Audi S5 TDI B9 2019+ Audi RS5 B92017+ Audi R8 2015+ Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR494100

Read more less

Racingline Billet Aluminium Fuel Cap Racingline’s new Billet Fuel Filler Cap is beautifully over-engineered, meticulously machined with the latest CNC 5-axis technology from solid billet of 6061 aerospace-grade aluminium in customary Racingline fashion to give an exquisite feel and beautiful appearance. Making opening that fuel cap just a little more pleasurable. It’s all about the detail… Machined from a solid billet of aluminium, lovingly hand-polished then anodised in glossy midnight black The design still allows you to prop the cap in the factory locater in the filler flap while you’re filling up Comes complete with new rubber o-ring seal and locating tag to match all the functionality of the plastic factory cap A new pressure relief valve integrated into the cap always maintains balanced tank pressure Closes with a satisfying engineered ‘click’ each time you fill up Confirmed Applications The fuel cap fits many VWG vehicles – main ones listed below. But if your car’s not listed below and your factory cap is a screw-on type then the RacingLine Cap will NOT fit. If it is ‘push and twist’ then it should fit. VW Golf 8 GTI 2020+VW Golf 8 R 2020+VW Golf 8 2020+VW Golf 7 & 7.5 GTI & Clubsport 2013-2020VW Golf 7 & 7.5 R 2013-2020VW Golf 7 & 7.5 2013-2020VW Passat B8 2015+VW Arteon 2017+VW T-Roc 2017+VW Tiguan II 2016+VW Jetta VII GLI 2019+VW Polo 6 GTI 2.0 TSI AW 2017+VW Polo 6 AW 2017+VW T-Cross 1.0 TSI 2017+ Audi A1 GB 2019+Audi S3 8Y 2020+Audi A3 8Y 2020+Audi S3 8V 2013-2020Audi A3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi SQ2 2018+Audi RSQ3 F3 2019+Audi A4 / S4 / RS4 B9 2015+Audi A5 / S5 / RS5 B9 2015+Audi A6 / S6 / RS6 4G 2011-2018Audi A7 / S7 / RS7 4G 2011-2018Audi Q5 II FY 2017+Audi Q5 3.0 TDI II FY 2017+Audi SQ5 2017+Audi Q3 2019+Audi Q2 2017+ SEAT Ibiza 6F 2017+SEAT Leon IV Cupra FW 2020+SEAT Leon IV FW 2020+SEAT Leon III Cupra 5F 2014-2020SEAT Leon III 5F 2015-2020SEAT Ateca Cupra 2018+SEAT Ateca 1.0 TSI 2016+SEAT Arona 1.0 TSI 2017+SEAT Tarraco 2.0 TSI 2018+ Skoda Octavia IV vRS 2.0 TSI NX 2020+Skoda Octavia IV NX 2020+Skoda Octavia III vRS 2.0 TSI 5E 2014-2020Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020Skoda Fabia III NJ 2015+Skoda Karoq 2.0 TSI 190hp 2018+Skoda Kodiaq vRS 2018+ Porsche 911 991 2012+Porsche Boxster & Cayman 981/982 2012+Porsche Panamera 970 2010-2017Porsche Cayenne 958/9YO 2011+Porsche Macan 2014+ Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR19G711

Read more less

Magnetic Differentialoil plug kitfor all Volkswagen  I  Audi  I  Cupra  I  Skoda KEEP YOUR AWD DIFFERENTIALS AND TRANSFER BOX PROTECTED Catch any ferrous particles in your oil with our RacingLine Magnetic Differential Oil Sump Plug set. What doesit do? Our new Magnetic Differential Sump Plug set attracts and separates out the minute abrasive and ferrous metal particles that are carried by the oil, stopping them circulating through your diff's lubrication system. Under the skin of your MQB Haldex AWD car you've got a rear differential and centre transfer box working hard underneath you. The harder you use your car, the higher your power, the greater the risk of minute metallic debris and the greater the benefit of using this Magnetic Differential Sump Plug set. The Magnetic Differential Sump Plug traps and removes those microscopic metal particles from your diff's lubricating oil. Install couldn’t be simpler – choose our Magnetic Differential Sump Plug set with your next oil-change and simply screw the new plugs in!  WHAT'S IN THE KIT? As the factory plugs are single use, our kit gives you enough washers for five services - meaning you might even save money in the long-term! MAGNETIC OIL DRAIN PLUG NON-MAGNETIC OIL REFILL PLUG 10x WASHERS - ENOUGH FOR FIVE SERVICES PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Magnetic end to ensure any metallic particles in differential oil are collected. CNC constructed from billet T6-6061 aircraft grade aluminium. The white laser-etched RacingLine logo is all part of the detail. CONFIRMED APPLICATIONS VWR180003 (for all applications) ALL WHEEL DRIVE 'HALDEX' CARS   Suitable for all recent 'Haldex' all wheel drive cars & SUVs, all engine types.   Two Sump Plug Sets per car :  front AWD Transfer Box and Rear Differential. (For older cars such as Golf 6 R, Audi S3 8P, Golf 5 R32 only rear diff plug fits) ​ Including: > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 Alltrack 2013-2020 > VW Passat 2.0 BiTDI 4Motion B8 2015+ > VW Arteon 2.0 BiTDI 4Motion 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 BiTDI 2016+ > VW Tiguan II 2.0 TSI 190ps 2018+ > VW Golf 5 R32 2005-2008 > VW Golf 6 R 2009-2014 > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TT 2.0 TFSI 8S 2014+ > Audi TTS 2.0 TFSI 8S 320ps (EA888.4) 2021+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi TTS II 8J 2008-2014 > Audi TTRS II 8J 2009-2014 > SEAT Leon III Cupra ST 4Drive 5F 2017-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 310ps 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 190ps 2018+ > Skoda Superb III 3V 2015+ > Skoda Kodiaq vRS 2018+

Read more less

Lower Motor MountTwin Dogbone Inserts.MQB/MQB Evo models. Get your power to the road or track where you need it!   The Twin Dogbone Inserts fill the large voids in the factory lower engine mount with two billet inserts, limiting drivetrain movement for greatly improved strength and a much more enjoyable drive. What do they do? The RacingLine upper and lower Twin Dogbone Mount Insert is one of the most affordable and transformative upgrades you can do to your MQB/MQB Evo car.    By slipping the RacingLine Twin Dogbone Insert into the voids of your factory lower engine mount you will stiffen the whole location of the drivetrain greatly to give a much tighter, sharper, more responsive feeling to your car.    Crucially, fitting both the two-piece upper and lower inserts of the RacingLine Twin Dogbone Insert eliminates the bending forces that can cause damage and ultimately failure if just one insert is fitted (as many others offer).  The RacingLine Twin Dogbone Insert limits the compliance of the lower engine mount by filling the large voids with our two billet inserts. All of the forwards/backwards rocking movement in your drivetrain is controlled by this Lower Mount – fitment of the RacingLine Twin Dogbone Insert adds strength to the drivetrain, helping to protect from future wear and breakages. The risk of wheel-hop under hard acceleration is almost eliminated as the whole engine and 'box assembly is firmly prevented from juddering when wheelspin occurs and through aggressive gearchages. Fitment of the Twin Inserts will only add a minimal increase NVH to the car’s characteristics, but most keen drivers love the sense that they are more 'connected' to their car, and the gentle 'growl' that the mount conveys.  Transformed Drive Transform the drive through eliminating wheel-hop off the line and through aggressive gearchanges - especially valuable on FWD cars. Durability guaranteed Unlike polyurethane or steel insert options on the market, this billet aluminum part will not deform and wear over time, and guarantees long-lasting performance. Twin Protection The Twin Dogbone Insert uses not one but two precision machined billet inserts to avoid the damaging bending moment that comes from fitment of a single insert. Added Strength Machined from billets of T6061 Aluminium, the Twin Dogbone Insert is more than strong enough to keep the drivetrain properly located on high power, hard driven cars. Twin Inserts.Working together. Upper Insert: slides into the voids along the rear side of mount. Lower Insert: inserts into the voids from underneath.  Confirmed Applications. MQB & MQB 'evo' 2.0 TSI, 1.8 TSI, 2.5 TFSI, 2.0 TDI MODELS VWR150003/4 see below to identify which type > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Kodiaq vRS 2018+   Select yourcorrect version. The factory mount comes in two version across MQB models. To ensure fitment on your vehicle, please visually verify the mount you have, then select the correct insert below:  OE part: 5Q0 198 037 A – You’ll require the Version 1 Insert OE part: 5Q0 198 037 F – You’ll require the Version 2 Insert We recommend a visual check to make certain you have the right version:   Precision Engineered forPerfect Performance. Each Twin Dogbone Insert start life as a billet of T6061 Aluminium, before being precision CNC-machined into shape Carefully developed for minimal transference of NVH through to the cabin RacingLine’s trademark black anodised finish for durability over many years Engineered to slip easily into the voids In factory lower mount Easy, straightforward installation designed to be fitted without subframe removal takes minutes  

Read more less

TRACKSPORT COILOVER KITFOR MQB, MQB EVO & A5 PLATFORM CARS Simply the ultimate. Bringing all of our motorsport track experience to your car's performance with the RacingLine Tracksport Coilovers. WHAT'S SO SPECIAL? The VWR TrackSport kit has been developed directly from our full race kits; the only differences are in the internal valving settings and the spring rate/lengths that are supplied.  The kit really is that special. Coilover rear dampers, plus 45mm inverted ‘thick-stem’ front damper providing a super stiff front McPherson strut, unique in the market. Easy set up: 12-point adjustment of bump and rebound damping, adjustable with no tools or jacking via the beautifully over-engineered adjuster knobs. Includes Adjustable Top Mounts, 60mm ID linear rate springs, CNC Machined and pre installed pillow ball bearing, for super accurate camber set up. INVERTED FRONT  The TrackSport kit uses inverted ‘thick-stem’ front dampers, giving a much stiffer strut to avoid flex under intense load. ADJUSTABLE DROP LINKS When you lower your car, the VWR Adjustable Drop Links should be paired with Tracksport to readjust the preload on your anti roll bar and add precision to handling response.   COILOVER REAR Rear dampers are now coilover, allowing a full range of spring travel at the rear, rather than relying on shorter springs (as non-coilover rear kits do). LINEAR SPRINGS Supplied with 60mm id linear springs (with helper springs on front); in standard sizes to make them easily swapped for different rates for full set-up options. LIGHTWEIGHT Lightweight, shortened aluminium bodies, exactly as our race kits use for a really significant weight saving. ADJUSTABLE TOP MOUNTS Adjustable Top Mounts are included, allowing camber adjustment and a transformation in precision. Please note: for full adjustment the front suspension strut-top domes must be cut off. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Lightweight, shortened aluminium bodies, exactly as our race kits use for a really significant weight saving. Inverted ‘thick-stem’ front dampers with 45mm ultra-rigid shaft Motorsport-style Monotube construction suspension system for optimum wheel-control. 60mm id linear springs with helper springs on front; standard sizes for easy swap for different rates. 12-point adjustment of bump and rebound rates. Adjusted with no tools, and with no need to jack your car up. CONFIRMED APPLICATIONS MQB & MQB 'EVO' VWR340000-G7 > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Superb III 3V 2015+ A5 PLATFORM VWR340000-G6 > VW Golf 5 GTI 2005-2008 > VW Golf 5 R32 2005-2008 > VW Golf 5 GTI ED30/Pirelli 2006-2007 > VW Golf 6 GTI 2009-2014 > VW Golf 6 R 2009-2014 > VW Scirocco R 2009-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > SEAT Leon II Cupra/R 1P 2006-2012 > SEAT Leon II 1P 2005-2012 > Skoda Octavia II vRS 1Z 2004-2013

Read more less

BRAKE PRESSURE. BEAUTIFUL BILLET REPLACEMENT BRAKE FLUID CAP. Replace your brake fluid reservoir cap for improved pressure equalisation and stunning appearance. WHY CHANGE? The RacingLine Brake Fluid Cap will hold your brake master cylinder at perfect pressure equalisation to ensure that your high-performance braking system is performing exactly as it should.  Especially with big brake kits on track, rapid pad wear can create negative pressure in the master cylinder Our replacement Brake Fluid Cap has a better pressure equalisation system than the factory cap, ensuring zero pressure variance This is an engineered, billet replacement coolant cap to replace the cheap plastic one. Don’t confuse this RacingLine full replacement cap with other cheap covers - which simply stick on over the plastic cap. We think your car deserves better than that. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined with the latest CNC 5-axis technology Each cap starts life as a solid billet of aerospace-quality 6061 aluminium Breathing system ensures perfect pressure balance Polished, then gloss-anodised in stunning Midnight Black to stay beautiful for year after year CONFIRMED APPLICATIONS > VW Golf 8 2020+ > VW Golf 8 GTI 2020+ > VW Golf 8 GTI Clubsport 2020+ > VW Golf 8 R 2020+ > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 5 GTI 1.4 TSI 6R 2008-2015 > VW Polo 6 AW 2017+ > VW T-Cross 2017+ > VW ID.Buzz 2023+ > VW ID.4 2020+ > VW Amarok 2010-2020 > VW ID.3 2019+ > Audi S1 2.0 TFSI 2015-2018 > Audi S3 8Y 2020+ > Audi A3 2.0 TSI 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Audi Q5 3.0 TDI II FY 2017+ > Audi Q4 E-tron 20210+ > SEAT Ibiza 6F 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 5F 2015-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Arona 2017+ > SEAT Tarraco 2.0 TSI 2018+ > Cupra Born 2021+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 3V 2015+ > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Enyaq 2021+

Read more less

BILLET OIL FILLER CAPFOR 2.0 TSI VW, AUDI, SKODA, SEAT/CUPRA CLICK BAIT. Make topping your oil up a pleasure.For all EA888.3 1.8 & 2.0 TSI - and now, a new version for 2.0 TSI EA888.4 WHY CHANGE YOUR OIL CAP? The RacingLine Billet Oil Cap is beautifully over-engineered in customary RacingLine fashion to give an exquisite feel and exceptional product experience.  Our oil cap is all about the 'click'. Never again will you worry whether you tightened your oil cap fully - as our internally sprung cap clicks hard and locks into place. An internal springing mechanism provides the click - and ensures absolute tightness when fitted, even with the heat soak from a high performance engine. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with these TSI engines. Please note, you will need to transfer the rubber seal from you old factory car over to your new oil cap. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. Meticulously machined  with the latest CNC 5-axis technology. Each cap starts life as a solid billet of 6061 aerospace-grade aluminium. Sophisticated internal springing mechanism. Polished, then gloss-anodised Midnight Black to stay beautiful year after year. CONFIRMED APPLICATIONS VWR19G702 For all 2.0 and 1.8 TSI EA888.3 & EA888.3B Engines ​ Please note, you will need to transfer the rubber seal from your old factory cap over to your new oil cap before use. > VW Golf 7 & 7.5 GTI & Clubsport 2013-2020 > VW Golf 7 & 7.5 R 2013-2020 > VW Golf 7 & 7.5 1.8 TSI 2013-2020 > VW Passat 2.0 TSI B8 2015+ > VW Arteon 2.0 TSI 2017+ > VW T-Roc R 2.0 TSI 2019+ > VW Tiguan II 2.0 TSI 2016+ > VW Jetta / GLI 7 2018+ > VW Polo 5 GTI 1.8 TSI 6C 2015-2018 > VW Polo 6 GTI 2.0 TSI AW 2017-2021 > VW Amarok 2010-2020 > Audi S1 2.0 TFSI 2015-2018 > Audi A1 2.0 40TFSI GB 2019-2021 > Audi S3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi A3 2.0 TSI / 1.8 TSI 8V 2013-2020 > Audi TTS 2.0 TFSI 8S 2015-2021 > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 45 TFSI 2.0 TSI 2018+ > Audi RSQ3 F3 2019+ > SEAT Ibiza Cupra 1.8TSI 6J 2017-2018 > SEAT Leon III Cupra 5F 2014-2020 > SEAT Leon III 1.8 TSI 5F 2014-2020 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia III vRS 2.0 TSI 5E 2014-2020 > Skoda Superb III 1.8 / 2.0 TSI 3V 2015+

Read more less

RacingLine Performance Oil Cap - 1.0TSI 1.2TSI 1.4TSI and GTERacingLine Performance's billet aluminium Oil cap to suit the EA211 Small engine TSI models comes complete ready to fit; including a new seal!  WHY CHANGE YOUR OIL CAP?The precision engineering ensures absolute tightness when fitted, even with the heat soak from a high performance engine. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with all TSI enginesThe precision engineering ensures absolute tightness when fitted, even with the heat soak from a high performance engine. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with all TSI enginesThe precision engineering ensures absolute tightness when fitted, even with the heat soak from a high performance engine. This cap will ensure that you'll never again have the problem of 'weeping' oil leaks from the standard cap - a known issue with all TSI engines. CONFIRMED APPLICATIONS VWR190004 All EA211 engines: 1.0 TSI 1.2 TSI 1.4 TSI 1.4 GTE/hybrid ​ Multiple vehicle types with this engine, including: > VW Golf 8 2020+ > VW Golf 8 GTE 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Up! GTI 2016+ > VW Up! 1.0 TSI 2016+ > VW Passat B8 2015+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco TSI / TDI 2008-2017 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > VW Polo 5 6C/6R 2008-2018 > VW Polo 6 AW 2017+ > VW Caddy 1.0 TSI 2015+ > VW T-Cross 2017+ > Audi A1 2010-2018 > Audi A1 GB 2019+ > Audi A3 8Y 2020+ > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi Q2 2017+ > Audi A3 8P 2003-2012 > SEAT Ibiza 6J 2008-2017 > SEAT Ibiza 6F 2017+ > SEAT Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Leon II 1P 2005-2012 > SEAT Ateca 2016+ > SEAT Arona 2017+ > SEAT Toledo 2012+ > SEAT Tarraco 2018+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Octavia II 1Z 2004-2013 > Skoda Fabia IV 2021+ > Skoda Fabia III NJ 2015+ > Skoda Karoq 2017+ > Skoda Rapid 2017+ > Skoda Kamiq 2019+ > Skoda Scala 2019+ > Skoda Kodiaq 2018+ > Porsche 911 991 2012+ > Porsche Boxster & Cayman 981/982 2012+

Read more less

Racingline Filter Oil & Cleaning Kit The Racingline Oil and Cleaner Kit will help you keep your filter in peak condition at all times and ensure that the complex triple-layer foam continues to deliver its power and filtration benefits for many years. Instructions are provided for cleaning and maintenance. It’s a simple process, but please take time to read through, or ensure that your technician reads them, before you begin. We would suggest that you keep these notes with your car for future maintenance/owners. We recommend that the filter element is cleaned and reoiled every 10,000 miles/16,000 km, and/or a visual inspection at least every 12 months. This is a simple procedure, and will ensure that your filter continues to deliver the power improvements over a standard car. If your car is regularly used in a dry/dusty environment, we advise that you clean and re-oil your filter more regularly If you don’t clean your filter at the above intervals, no loss of filtration will occur, and your engine will still be fully protected. However, the performance advantages from the additional air flow of a clean filter will be lost. You will also shorten the life of the filter element. REPLACEMENT FILTER Like all the other filters on your car, it’s worth replacing the air filter element itself periodically. Rather than cleaning and re-oiling, lots of customers prefer to simply replace their filter element for what is a relatively low cost. We recommend replacement after 2 years for optimum performance. Of course, the filter will last for a longer period of time with correct maintenance and inspection for condition of foam as laid out below. BUY REPLACEMENT FILTER Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR120000

Read more less

Racingline 380mm Carbon Ceramic Disc UpgradeThis pair of replacement Complete Discs come ready to install as a replacement for your Racingline Stage 3 Carbon Ceramic Brake kit.They can also be used to Upgade an existing Racingline Stage 3 Brake kit with Steel Discs, however you must also purchase the appropriate padss. Please note: They are not compatible with the Older generations of Racingline Big Brake Kit. requires carbon spec pads for upgrading to carbon-ceramics  

Read more less

Racingline Replacement 352mm Rotors - STAGE 3 - VWR680000These replacement Rotors come without bells ready to build onto the original bells of your 2013-2016 Volkswagen Racing 6-Pot Brake kit.Please note: They are not compatible with the Other generations of Racingline Big Brake Kit. Racingline Replacement 360mm Rotors - STAGE 3 - VWR680001 These replacement Rotors come without bells ready to build onto the original bells of your 2016-2018 Racingline 6-Pot Brake kit.Please note: They are not compatible with the Other generations of Racingline Big Brake Kit. Racingline 345mm Replacement Rotors (Complete) - STAGE 2 - VWR680002These replacement rotors are suitable for the Racingline 'Stage 2' Brake Kit for the PQ35 Platform and MQB Platform ModelsSold as a Pair of Rotors.- The discs have a new thickness of 30mm- The min thickness is 28mm- The max wear thickness is 1.4mm per side Racingline Replacement 355mm Rotors - STAGE 3 - VWR680003These replacement Rotors come without bells ready to build onto the original bells of your Current Generation 355mm Racingline Stage 3 Big Brake Kit.- The discs have a new thickness of 32mm- The min thickness is 30mm- The max wear thickness is 1.4mm per sidePlease note: They are not compatible with the Older generations of Racingline Big Brake Kit. Racingline Replacement 380mm Rotors - STAGE 3 - VWR680004These replacement Rotors come without bells ready to build onto the original bells of your Current Generation 380mm Racingline Stage 3 Big Brake Kit.- The discs have a new thickness of 32mm- The min thickness is 30mm- The max wear thickness is 1.4mm per sidePlease note: They are not compatible with the Older generations of Racingline Big Brake Kit.

Read more less

Racingline Wheel Stud & Nut Kit - M14x1.50Remove and install your wheels at the track all the time? Then you’ll know how frustrating the factory wheel bolts can be. Lining up the bolt holes, bashing the wheel against your beautiful brakes calipers, then cross-threading the bolts at the same time. All while balancing the weight of the wheel. Our Stud & Nut kit gives a stronger fixing method than using the original wheel bolts. Plus they’re a much quicker method to swap wheels for motorsport / track use as well. Converting your car to our Stud & Nut Kit is a simple, reversible upgrade that will speed up your wheel changes. Our Stud & Nut Kit also allow for the safe use of different spacer size setups without the risk of running out of bolt threads. Beautiful midnight-black gloss anodised finish on the nuts will smarten up your car’s looks as well as its practicality. Both conical and ball seat lug nuts are available to suit either factory or aftermarket wheels. Which Stud Lengths do I need?- If your vehicle is No wheel spacers, or wheel spacers upto 10mm in width, You need the 70mm Studs- If your vehicle has 11-20mm Wheel Spacers installed, You need the 80mm Studs.Stronger FixingM14 x 1.5 High Tensile Steel Motorsport Studs and larger anodised Wheel Nuts exceed the strength of the factory bolts for ultimate strength and safety. Quick Wheel ChangesStud and Nut kits are suited to any car that sees track use with regular wheel swaps. The studs really help to speed things up when you are trackside. Easy InstallationThese studs screw in place of your original wheel bolts with allen drive inserts to make installation a breeze. Plus easily removed in future. Precision engineered; for perfect performance!M14 x 1.5 heat treated high carbon steel stud with chrome plated finishLightweight M14 x 1.5 7000-series aluminium open-ended nuts with gloss anodised nutsInternal 6mm allen stud drive for accurate fixationsKnurled outer collar for much easier finger grip8mm of unthreaded stud shank for brake disc clearanceOversize 19mm nuts – greater surface area for contact & ease of use IMPORTANT NOTES: - Max Vehicle Weight 2500KG- This is not a 'Locking' or Security solution

Read more less

Racingline Racing Brake Fluid - 500 mlWhether you're running stock brakes for Fast Road, or a Big Brake Kit on the track, the new Racing Brake Fluid from Racingline is a fantastic upgrade to any braking system! * Compatible with all brake set ups - from standard factory brakes right up to our mighty Stage 3 Big Brake Kits on track* One of the highest specification brake fluids on the market* Suitable for any form of motorsport as well as day to day road use without compromise* Since our Racing Brake Fluid is significantly less expensive than buying new pads or a big brake kit, this is your ideal first braking modification* A Highly Refined Super-DOT4 fluid, giving significantly higher boiling point than regular DOT4 or DOT5.1* Racingline's Racing Brake Fluid has a Dry Boiling point of 312ºc, and a wet boiling point of 204ºc PLEASE NOTE: We can only ship this product within Mainland UK. This item or subsequently any orders with this item on from outside mainland UK will be cancelled and refunded. 

Read more less

ADJUSTABLEDROP LINKS. RACE-PROVEN FOR YOUR ROAD CAR. The RacingLine Adjustable Droplinks are an essential upgrade to any lowered or performance car. WHAT THEY DO. If you’ve lowered your car, our Adjustable Drop Links are an essential upgrade to zero the pre-load on your anti-roll bar geometry, plus add stiffness and precision by replacing the stock rubber joints with ball joints.  The drop link attaches the front anti roll bar ends to the front damper.  The OEM links were made the length they are for a reason - to compliment the standard ride height.  But when you lower ride height, the car will now be pulling your anti roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle. Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners. These links were developed for our race cars to allow the anti roll bar to work the way it should. Adjusting the height of droplinks to the equivalent of the lowering amount is a must. Available in two lengths: 250mm for almost all applications. Or, 200mm length for cars running our TrackSport suspension or any other coilover kit with adjustable sway-bar perch. ADJUSTABLE 30mm of adjustable length to zero preload on the Anti Roll Bar. Choice of two lengths to suit different ride heights. ​ ​ PRECISE By replacing the soft rubber bushing in the factory links with motorsport-spec ball joints, cornering and steering responses are sharpened. RACE-PROVEN Developed for our race cars, yet no compromise for road cars. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. 30mm of adjustable length to zero the preload on the Anti Roll Bar Lightweight CNC-machined 6061-T2 Aluminum bodies with beautiful gloss black anodised coating Left / Right threaded ends make for easy length adjustment Motorsport-specification ball joint ends - high strength teflon-lined steel Rubber dust boots fitted to protect the joints  CONFIRMED APPLICATIONS VWR420000250mm length -All applications VWR420001200mm length - Coilover set-ups with adjustable roll-bar drop link mounts > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi TT II 8J 2006-2014 > Audi TTRS II 8J 2009-2014 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Leon II 1P 2005-2012 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Octavia II 1Z 2004-2013 > Skoda Superb III 3V 2015+

Read more less