Performance - Audi RS4 B7 (2004-2008)
Airtec AIRTEC MOTORSPORT MIL LIGHT CHEATER
AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.
£21.87£19.68
ECS Tuning ECS TUNING - RS4 Exhaust H-Pipe Kit
Product Details Got a couple hours in your afternoon or Saturday? Here is a great way to increase the sound quality of your RS4 along with increasing top end performance. ECS RS4 H-Pipe eliminates your factory center resonator with a H-pipe that really enhances the sound quality of your RS4 without any sacrifice in interior cabin drone. Dyno charts have also shown a increase of 3-5hp between 6-8000 rpm. Installing this ECS H-pipe still allows use of the factory flapper valves in the rear mufflers. With the ECS H-pipe installed the difference between the flapper valves being open or closed is much more dramatic that with the stock exhaust system.Quite simply this is a fantastic way of increasing sound quality of your RS4 without having to go through the large expense of replacing the whole "cat" back system. This upgrade is a simple bolt on modification and measures 2.25" in diameter. Simply cut the center resonator out (between the center resonator & the rear mufflers) & install the ECS H-pipe using the factory sleeve clamps & two supplied clamps.Limited lifetime warranty to the original purchaser. This Part Fits the Following Vehicles Make Model Submodel Engine Audi B7 RS4 All V8 *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.
£486.37
forge Motorsport Forge Motorsport - Gold Heat Resistant Wrap
State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…
£26.97
Auto Specialists High Temperature White Exhaust Wrap
High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!
£23.15 - £31.84
Milltek Sport Milltek Sport - Cat Back Exhaust (Multiple Options) Audi RS4 B7 (Saloon, Avant & Cabriolet)
FITS: Audi RS4 B7 4.2 V8 Saloon, Avant and Cabriolet 2006 to 2008 Available in resonated or none resonated, with or without valve and 2 tailpipe options Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase in volume of their exhaust and/or add a more suitably aggressive tone. All our products are made from 304L “Aircraft” Grade stainless steel. This quality material will ensure that your Cat-Back system will last through any harsh conditions. All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.
£1,361.00 - £2,461.36
Milltek Sport Milltek Sport - Downpipe (decat or sports cat) Audi RS4 B7 4.2 V8
This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Fits: Audi RS4 B7 4.2 V8 Saloon, Avant and Cabriolet 2006 to 2008 The part is used to bypass the catalyst from the exhaust to create a ‘Decat’ or Sports Cat system. Eliminating the catalyst will greatly enhance the gas-flow and the performance, adding significant Hp to your vehicle by removing the density of the catalyst in which exhaust gases are pushed through. All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.
£724.31 - £1,380.00
Auto Specialists Titanium Exhaust Wrap Higher Temperture Wrap for Turbo Manifolds
Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!
£28.89 - £37.56