Performance - Audi RS4 B9 (2015-Present)

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Replacement motor for the exhaust valve on the MK8 Fiesta ST Ideal if yours is damaged or if you have a post 2020 model with the different valve which wont fit with exhausts! These are plug and play fitment 

Read more less

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!

Read more less

High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!  

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

FITS: Audi RS4 B9 2.9 V6 Turbo Avant (OPF/GPF Models) 2019 and Later GPF Back With Oval Trims Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU832 GPF Back Non-Resonated (Louder) with Burnt Titanium Oval Trims 70 2.76 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

 This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. FITS:  Audi RS4 B9 2.9 V6 Turbo Avant (OPF/GPF Models) 2019 and Later Audi RS5 B9 2.9 V6 Turbo Coupe (OPF/GPF Models) 2019 and Later Audi RS5 B9 2.9 V6 Turbo Sportback (OPF/GPF Models) 2019 and Later Decat / Sports Cat and OPF/GPF Bypass Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU820 Decat and OPF/GPF Bypass 70 2.76 Yes No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Active Valve Control (AVC) is available to support both vehicles equipped with factory valves on the exhaust as well as a growing range of upgrades Milltek Sport offers to have performance exhaust systems with Valve Control. Also with optional App control on selected models, via iPhone or Android smartphone app’s, AVC brings total control of the exhaust to the drivers finger tips, via full CAN BUS integration with built in safety controls, Milltek’s AVC enables the driver to choose when the valves open and close to tune the sound and volume of the exhaust.       All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

Read more less

FITS: Audi RS4 B9 2.9 V6 Turbo Avant (Non OPF/GPF Models) 2018 and later Part No. Description Pipe Ø (MM) Pipe Ø (INCHES) EC approved Race System Valvesonic SSXAU808 Cat-back 70 2.76 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

 This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. FITS: Audi RS4 B9 2.9 V6 Turbo Avant (Non OPF/GPF Models) 2018 and later Audi RS5 B9 2.9 V6 Turbo Coupe (Non OPF/GPF Models) 2017 and 2019 Audi RS5 B9.5 2.9 V6 Turbo Coupe (Non OPF Models) 2019 and Later Audi RS5 B9 2.9 V6 Turbo Sportback (Non-OPF/GPF Models) 2018 and 2019 Audi RS5 B9.5 2.9 V6 Turbo Sportback (Non OPF Models) 2019 and Later Cat Replacement Pipes - LH & RH Decat Downpipes with Heat Wrap Protection Requires Stage 2 ECU Remap Part No. Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU816 76.2 3 Yes No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Active Valve Control (AVC) is available to support both vehicles equipped with factory valves on the exhaust as well as a growing range of upgrades Milltek Sport offers to have performance exhaust systems with Valve Control. Also with optional App control on selected models, via iPhone or Android smartphone app’s, AVC brings total control of the exhaust to the drivers finger tips, via full CAN BUS integration with built in safety controls, Milltek’s AVC enables the driver to choose when the valves open and close to tune the sound and volume of the exhaust.       All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

Read more less