Performance - Audi S3 8V (2012-2020)

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm bore pipework and fits from the turbo to the standard centre section. The sports cat exhaust option will enable you to pass a UK MOT emissions test or police road side checks. The de-cat sports exhaust is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks. All relevant fittings and gaskets are supplied. (Except turbo clamp). Media British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S3 performance exhaust is made in 3"/76.2mm pipework and fits from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated sports exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust is also available as a non-resonated version (excluding the centre silencer) which is a louder optionåÊas it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Please Note - This performance exhaust removes the use of exhaust valves. When switching drive modes (e.g. Comfort to Dynamic mode) your exhaust tone will not change from quieter to louder as before. Using a Non-Valved exhaust will not harm the running of your vehicle, you will simply not have exhaust sound options, however the Cobra Sport exhaust has been designed with this in mind. åÊ Press Release Cars of the calibre of Audi's S3 require more careful consideration prior to development of a performance enhancing exhaust system. Both Cobra Sport's Technical and R&D teams were involved in the planning and preparation that went into the product testing and development of this new system to ensure that the correct balance was achieved between aesthetics and power to make the most of the S3's 2.0 TFSi engine. The Cobra Sport system delivers significant power increases, but its glory has to be in the weight saving achieved. Swapping the Cat-back system results in a staggering 30% reduction in weight from the OE system's 26.9kg, with the Cobra Sport alternative weighing in at 18.8kg on like for like components. You can be assured of only the highest quality materials being used in the production of all Cobra Sports exhaust systems with the highest quality grade 304 stainless steel used throughout the components and each exhaust being hand finished and individually TIG welded at our Sheffield factory. The levels of quality achieved enables us to offer a lifetime guarantee on all exhaust systems which provides the ultimate piece of mind for the customer. The Cobra Sport's quad exit system benefits from angled 88.9mm tailpipes which can be finished in either matt black or original highly polished stainless steel. The end result of this attention to detail, is an ultra-lightweight system which compliments the S3's body styling and sporting pedigree while delivering enhanced performance and handling capabilities. Media Example of Audi S3 (3 door) sports exhaust (cat-back - resonated). Example of Audi S3 (3 door) sports exhaust (turbo-back system - sports cat & resonated). Example of Audi S3 (saloon) sports exhaust (cat-back - non-resonated). British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

​​​​​​Fitting this part increases the airflow into the turbo by replacing the restrictive plastic OEM turbo inlet pipe. This innovative product fits all MQB platforms as well as both left and right hand drive vehicles and is a direct replacement for OEM part code 5Q0129635L. When fitting this part, you will increase the available airflow and create an impressive sound by creating a larger, smoother transition between the turbo inlet hose and compressor housing inlet. An all-aluminium construction that fits with standard inlet hose or aftermarket systems, featuring a precision mandrel bent CNC formed pipe along with a precision CNC high flow machined flange. Twin o-ring seal design between the turbo coupler and inner surface of the turbo inlet ensures no leaks and no debris can be drawn into the turbo internals. This part also fits with our induction hose, FMMK7INDH Increased airflow. All aluminium construction. CNC machined couplers for a precision fit. No check engine lights Black hardwearing powdercoated finish. Compatible with LHD and RHD Up to 8 BHP and 16 ft/lbs or torque improvement Made in Great Britain.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Before fitment, please ensure the spacer fits flat to the back of the wheel. These wheel spacers are hubcentric These CNC machined precision alloy wheel spacers are 13 mm thick with a dual 5 stud bolt pattern for both 100 and 112mm PCD fitments. The spacers are anodised black to inhibit corrosion and "bonding" to the wheel or hub. These spacers are suitable for most vehicles produced by Volkswagen Group. A 13mm spacer will give an overall track increase of 26mm when fitted to both sides of an axle. These spacers are priced and sold per pair. Extended wheel bolts are not supplied.   In The Box:2 x FMWS13 13mm Wheel Spacer1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A Big Brake kit with 6 pot calipers and 356 x 32mm ventilated discs. The discs are grooved to remove braking residuals and maintain optimum performance. Included in the kit are Forge braided brakes hoses, mountings, and brake pads. This kit is suitable for the Golf Mk7 and Audi S3 8V Chassis, as long as they are fitted with 18inch or larger wheels. This brake kit is supplied with either our Forge Ceramic Brake Pads (FMBKPAD) or  EBC Yellow Pads. For further information on EBC pads please see EBC website. Depending on your wheel design, you may need spacers between the hub and the wheel in order to clear the calipers. We have a stencil available for you to place behind your wheels to work out fitment. Please email Jamie@forgemotorsport.co.uk These kits do not have CE / TUV approval and are recommended for race use only   Each Caliper weighs 3.25kg Each Disc weighs 9.35kg   Torque Settings: Carrier to Hub 343NM Caliper to Carrier 139NM   Colour Code: Dark Blue- ZAK Beam Blue Download our guide on how to clean and maintain your Forge Motorsport Big Brake Kit   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This precision-machined bush insert has been carefully designed to reduce the range of movement in the OEM Lower Dogbone bush that counter acts engine movement under heavy acceleration and braking, resulting a firmer feel when shifting. To be sure that you have selected the correct bush insert for your vehicle please check the fitment guide below: CNC Machined from a single billet of aluminium alloy. All Forge machined parts go through a rigorous quality control procedure to ensure that they have been made to the highest standard (working to a tolerance of less than 0.1mm). With a hardwearing black anodised finish which protects the part from oxidation to ensure it looks its best for longer. Developed in house at our Gloucester R&D workshop with working prototypes 3D printed and test fitted. Part of a wider range of bush inserts Forge currently have in development, please see the Forge Motorsport website for details. This Bush Insert appears on the following vehicles:  Audi RS3 2.5TFSI. Audi TTRS 2.5TFSI. Audi TTRS 8s Audi TTS 2.0TSFI. Audi  S3  Seat Leon (290-300bhp) 2.0TFSI. Volkswagen Golf MK7 GTI 2.0TFSI. *When fitting please Torque to 135 Nm If your vehicle has this bush (part number : 5Q0 198 037 B) fitted  you need a type “A” insert, part number FMAM-B2 If your vehicle has the alternative bush (part number: 5Q0 198 037 C) fitted you need type “B” insert, part number FMAM-B3   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Following on from the success of our billet catch can kit for the Golf Mk5 and Golf Mk6, we are pleased to present another of our latest kits for the Golf Mk7R and Audi S3. If your engine bay looks like the image below, you will need to also purchase the washer bottle. This can be selected on the drop down menu above.  If your engine bay looks like the image below you do not need to purchase the washer bottle. In house testing has proven our oil catch can kit's ability to effectively reduce sludge and carbon build up, allowing the Golf Mk7R and Audi S3 engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend to any owner to seriously consider, particularly if they are planning more advanced power tuning later. The 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain. Included is a dipstick for level inspection and a well-placed drain tap. Throughout the development of this product the design has been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless-steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement for the tank to be resistant to both pressure expansion and vacuum collapse, and to enable the kit to function within a clearly defined temperature range -54°C to +150°C (-65°F to +300°F) The black external hose braiding and push fit fittings form an OEM-looking product when installed.   Highlights 0.4L capacity* A drain tap for ease of emptying A dipstick for simple level inspection 2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous look Fully assembled with fittings to suit the OEM connections Inner tube is constructed from anti-static smooth fuel resistant nitrile rubber Outer cover is constructed from reinforced stainless-steel wire braid consisting of partial inner braid & full cover outer braiding which is resistant to pressure expansion and vacuum collapse Temperature Range: -54°C to +150°C (-65°F to 300°F) The engine cover does not need to be removed Installation is straight forward and all the necessary fittings and instructions included You will not need to modify any original equipment which means this kit is fully reversible.            *Dipstick level is set at less than 0.4L for optimum breathing.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Scorpion Exhausts Audi S3 2.0T 8V Saloon Resonated cat-back system with no valves Fits Years 2013 to 2016 Fits to OEM / Scorpion Pipe Diameter 76mm/3 One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAU052D Product Type Cat-Back Resonated Resonated Valve No Fitment Years 2013 - 2016 Fits To OEM / Scorpion Model Fitment 8V Pipe Diameter 76mm/3" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 119cm x 60cm x 28cm OEM Scorpion Change Power Difference 284.6 BHP 288.3 BHP +3.7BHP Weight Difference 24 KG 21 KG -3 KG

Read more less

Scorpion Exhausts Audi S3 2.0T 8V Saloon Resonated cat-back system with electronic valves Fits Years 2013 to 2016 Fits to OEM / Scorpion Pipe Diameter 76mm/3 One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAU051D Product Type Cat-Back Resonated Resonated Valve Yes Fitment Years 2013 - 2016 Fits To OEM / Scorpion Model Fitment 8V Pipe Diameter 76mm/3" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 119cm x 60cm x 28cm Notes Valves require O.E motors. OEM Scorpion Change Power Difference 284.6 BHP 288.3 BHP +3.7BHP Weight Difference 24 KG 21 KG -3 KG

Read more less

Scorpion Exhausts Audi S3 2.0T 8V 3 Door & Sportback Resonated cat-back system with no valves Fits Years 2013 to 2016 Fits to OEM / Scorpion Pipe Diameter 76mm/3 One of the VAG group of companies Audi really got noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro the world’s first all-wheel drive turbo production car. A real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available now. We are proud to offer a new development for the Audi range of cars. Manufactured from premium 80mm/3.14” T304 Stainless Steel the Audi S3 8V 2.0T and our CNC Mandrel bent large bore design permits maximum performance by allowing a greater flow of exhaust gas. Currently available options are resonated valved, resonated non-valved, non-resonated valved and non-resonated non-valved. Valved - which uses the original motor and can be operated by the driver with the drive mode select button inside the car. There is also a non-valved which deletes the valve completely for a continuous sportier tone. Our system once fitted gives the car a measurable reduction in weight when compared to the OE system this is an improvement most drivers will find hard to rebuff. When applicable Scorpion systems are fitted with an acoustically developed silencer to ensure zero drone throughout the rev range. To compliment the Audi’s facelift aesthetics, we can offer three handpicked styles of our signature Scorpion tailpipes. For this system you can choose from quad Polished Daytona, Black Ceramic Daytona, or Carbon Ascari.  For those wanting to take the next step with performance upgrades our Scorpion technicians have also developed a de-cat downpipe which vastly improves flow and power over the OEM figures, or we offer a precision engineered Sports cat downpipe which has greater flow over OEM. (For closed circuit use only) If you are upgrading your exhaust insist on the enthusiast’s brand. Proven to perform at the very highest level. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAU050D Product Type Cat-Back Resonated Resonated Valve No Fitment Years 2013 - 2016 Fits To OEM / Scorpion Model Fitment 8V Pipe Diameter 80mm/3.15" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 101cm x 62cm x 35cm OEM Scorpion Change Weight Difference 24 KG 22.45 KG -1.55 KG

Read more less

Scorpion Exhausts Audi S3 2.0T 8V Saloon Non-resonated cat-back system with no valves Fits Years 2013 to 2016 Fits to OEM / Scorpion Pipe Diameter 76mm/3 One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAUS052D Product Type Cat-Back Resonated Non-resonated Valve No Fitment Years 2013 - 2016 Fits To OEM / Scorpion Model Fitment 8V Pipe Diameter 76mm/3" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 119cm x 60cm x 28cm OEM Scorpion Change Power Difference 284.6 BHP 288.3 BHP +3.7BHP Weight Difference 24 KG 18.5 KG -5.5 KG

Read more less

Scorpion Exhausts Audi S3 2.0T 8V 3 Door & Sportback Non-resonated cat-back system with no valves Fits Years 2013 to 2016 Fits to OEM / Scorpion Pipe Diameter 76mm/3 One of the VAG group of companies Audi really got noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro the world’s first all-wheel drive turbo production car. A real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available now. We are proud to offer a new development for the Audi range of cars. Manufactured from premium 80mm/3.14” T304 Stainless Steel the Audi S3 8V 2.0T and our CNC Mandrel bent large bore design permits maximum performance by allowing a greater flow of exhaust gas. Currently available options are resonated valved, resonated non-valved, non-resonated valved and non-resonated non-valved. Valved - which uses the original motor and can be operated by the driver with the drive mode select button inside the car. There is also a non-valved which deletes the valve completely for a continuous sportier tone. Our system once fitted gives the car a measurable reduction in weight when compared to the OE system this is an improvement most drivers will find hard to rebuff. When applicable Scorpion systems are fitted with an acoustically developed silencer to ensure zero drone throughout the rev range. To compliment the Audi’s facelift aesthetics, we can offer three handpicked styles of our signature Scorpion tailpipes. For this system you can choose from quad Polished Daytona, Black Ceramic Daytona, or Carbon Ascari.  For those wanting to take the next step with performance upgrades our Scorpion technicians have also developed a de-cat downpipe which vastly improves flow and power over the OEM figures, or we offer a precision engineered Sports cat downpipe which has greater flow over OEM. (For closed circuit use only) If you are upgrading your exhaust insist on the enthusiast’s brand. Proven to perform at the very highest level. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAUS050D Product Type Cat-Back Resonated Non-resonated Valve No Fitment Years 2013 - 2016 Fits To OEM / Scorpion Model Fitment 8V Pipe Diameter 80mm/3.15" * Tailpipe Daytona Tailpipe Diameter 90mm Shipping Dimensions 101cm x 62cm x 35cm OEM Scorpion Change Weight Difference 24 KG 19.8 KG -4.2 KG

Read more less