Performance - Audi S5 B8 (8T) 2007-2016

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!

Read more less

High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!  

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

 This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only. Large-bore Downpipes - Manual-only  fits: Audi S5 4.2 V8 B8 Coupé (Manual Only) 2007 to 2011 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Change the tone of your Audi S5 3.0T exhaust with an easy-to-install upgrade from ECS Tuning! The ECS Tuning Center X-Pipe installs in place of the resonator located in the middle of the factory exhaust system to increase exhaust note and allow for better flow of exhaust gases. The engineers at ECS Tuning have designed a direct fit dual exhaust pipe featuring an X cross section in the center to balance exhaust pulses and increase expulsion of spent exhaust gases from the engine. But more importantly, installation of the Center X-Pipe increases the factory exhaust system note exponentially giving a more tuned European sound. The ECS X-pipe is fully CNC mandrel bent from high quality 304L stainless steel, tig welded with smooth merged pipe joints for optimal flow, and finished off with a soft brushed finish for exceptional looks. Installation is a breeze and can be easily performed with the vehicle lifted on proper jack stands in your own driveway. Our in-depth installation PDF, located under the Installation Tab, walks you through everything from proper measurement, cutting, and install to ensure a perfect fit to your OEM exhaust. We've even included a complete set of clamps to make sure everything is properly installed without worry of leaks. 304L Stainless Steel Engineered and tested in-house Precision CNC mandrel bent TIG welded joints Adds increased tuned European sound with minimal interior dB/drone Will NOT cause CEL (Check Engine Light) *Installation requires cutting of the OEM exhaust using an exhaust pipe cutter, reciprocating saw, or other similar tool. The Schwaben Exhaust Pipe Cutter is available for order as es3106581. Cross Reference res delete, resonator delete, x pipe, xpipe This Part Fits the Following Vehicles Make Model Submodel Engine Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. This Audi S5 performance exhausts is made in 2.5"/63.5mm pipework and fits from the centre section backwards replacing the rear boxes. All relevant fittings and gaskets are supplied. Press Release Keen to build upon the success of their existing cat back exhaust systems for the Audi S5, Cobra Sport were keen to offer a dual rear box exhaust system which will fit both the coupe and cabriolet models. The new system improves the exhaust tone through subtly changes to the pitch and tone whilst upgrading the styling featuring quad exhaust tips which fit perfectly with the S5 rear diffuser. Due to the additional strengthening on the cabriolet chassis, the Cobra Sport cat back exhaust systems are only available for the S5 coupe. Keen to offer a system for all Audi S5 models, the Cobra Sport research and development team have created a system that replaces only the rear section of the exhaust manufactured in mandrel bent 2.5" (63.5mm) pipework. Matched with twin rear boxes, the Cobra Sport system fit directly to the existing pipework and is finished with a choice of highly polished 3.5" tailpipes. Cobra Sport were keen to make the most of the beautiful tone produced by the 3.0 TFSI engine. The completed Cobra Sport system, although minimal in size produces a beautifully improved exhaust tone with a slightly deeper pitch. During the 4,000 rpm static sound test the replacement rear section increased sound levels by +4.6db to record 75.5db on the sound meter. This subtle upgrade is further demonstrated by a similar +4.5db increase in sound levels when idle. The Cobra Sport systems also offer an impressive 1.66kg weight saving over the standard system weighing in at only 12.34kg. The styling of the system is finished off with a choice of subtle twin 3.5" (88.9mm) slash-cut tailpipes both finished in highly polished T304 stainless steel. Matt Thomas, Sales Manager at Cobra Sport says "We're excited to offer this alternative Cobra Sport system for the Audi S5 for those looking to subtly improve the sound and improve the looks of the S5. The styling of the system blends well the Audi character with the quad tailpipes fitting perfectly into the rear diffuser. Expanding our direct fit systems for the S5 to include the cabriolet model was always on the agenda, our Research and Development department have produced a system." Media Example of Audi S5 3.0 TFSI Rear Exhaust British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

Fits Coupe model only. Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Audi S5 performance exhausts are made in 2.5"/63.5mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. The resonated exhaust option includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version (excluding the centre silencer) which is a louder option as it excludes the centre silencer and therefore, has a sportier exhaust note. All relevant fittings and gaskets are supplied. Press Release Fitted with Cobra Sports specialist exhaust technology, the new exhaust systems for the S5 give substantial increases in power and torque from the V6 3.0 TFSI engine. Cobra Sport's Sales Manager, Matt Thomas, Sales Manager at Cobra Sport says "We are impressed with the results which we have achieved on the Audi S5, but for me, the real improvement lies is the enhanced engine tone which the exhaust provides. After testing the car both with the OE system and a range of our upgrades, I feel that the Cobra Sport system delivers a smoother more responsive drive and gives the car more of a performance edge with a sound track to match." The unbelievable sound quality is pitch perfect for this engine and when under full load the exhaust system really comes to life with an aggressive tone. Under part throttle or idle the volume is both subtle, and sporty, therefore is also suited to daily driving. Great sound comes as standard with Cobra Sport! This is backed up by our sound testing where the Cobra Sport systems were quieter at idle (-1db) but during the stationary test at 4,000 rpm the volume of the non resonated cat back system increased by +15.7db to 67.2db. The bore size of the mandrel bent T304 stainless steel pipework has been increased by 0.25" to 2.5" (63.5mm) to allow for smoother gas flow. Matched with the upgraded resonators and rear box, the Cobra Sport cat back system weighs in at 32.14kg. Power testing of the completed Cobra Sport cat back system on the rolling road revealed an impressive +7.3bhp increase in power along with an 8.2 lb-ft increase in torque. The systems come with Cobra Sport's own unique quad tailpipe selection all designed to fit neatly within the S5's showcase rear diffuser. Tailpipes choices consist of a 3.5" twin slash cut & angled or a 3.5" twin inverted slash cut & angled version. Media Example of Audi S5 sports exhaust (Cat-back - Resonated) Example of Audi S5 sports exhaust (Cat-back - Non Resonated) British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less

FITS: Audi S5 3.0 TFSI B8.5 Sportback 2012 to 2016 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

FITS: Audi S5 3.0 TFSI B8 Sportback 2010 to 2011 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

 FITS: Audi S5 3.0 TFSI B8.5 Coupé & Cabriolet 2011 to 2016 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

 FITS: Audi S5 3.0 TFSI B8 Coupé & Cabriolet (S tronic) 2009 to 2011 NOTES: Race Version not recommended for road use. Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

 FITS: Audi S5 4.2 V8 B8 Coupé (Manual Only) 2007 to 2011 Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less