Performance - Audi S5 B9 (F5) 2016-Present

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!

Read more less

High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!  

Read more less

AIRTEC Motorsport MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, however we do recommend a re-map to ensure the issue is resolved.

Read more less

IMAGES ARE ONLY TO SHOW THE FINISH OF THE TIPS AND ARE NOT SPECIFICALLY THE TIPS YOU WILL RECIEVE! 2x 90mm Tip Assembly replacement tips for milltek system To replace existing or change current colour scheme

Read more less

State of art polymer laminated glass cloth Superb heat barrier qualities Withstands radiant temperatures up to 450°C/850°F Ultra thin for minimal clearance As used in WRC and F1 Each roll is 50mm wide x 5 metres long (2" x 16ft) Adhesive backing for ease of fitting After extensive market research Forge Motorsport are proud to release a state of the art metalized polymer laminated glass cloth with adhesive backing that is both extremely light and capable of handling continuous radiant temperatures of up to 450°C. It reflects up to 80% of all radiant heat, whilst offering weight savings against other heat reflecting materials. Forge Motorsport's gold reflective heat barrier requires minimal clearance and is an extremely pliable material with a pressure sensitive adhesive backing that is easy to apply and remove. As used in WRC and F1, make no mistake this gold reflective heat barrier tape is of excellent quality and superb value for money. When used correctly this tape can be used to protect intake components thus lowering IATs resulting in a more efficient and reliable engine cycle. Typical uses are: Wrapping wiring, inside engine covers, bulkheads and firewalls, boost pipes, fuel lines, under seats, intake pipes, airboxes, engine compartments, fuel cells…  

Read more less

FITS: Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Sport Diff Models Only & Without Brace Bars) - Left Hand Drive Cars Only 2016 and Later Audi S5 3.0 V6 Turbo Sportback B9 (Sport Diff Models Only & without Brace Bars) 2017 and Later Non GPF Models  Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

 This product alters a factory emissions control device and does not meet current emission laws. For motorsport use only.  fits: Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Non Sport Diff Models) - Left Hand Drive Cars Only 2016 and Later Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Non Sport Diff Models) - Right Hand Drive Cars Only 2016 and Later Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Sport Diff Models Only & Without Brace Bars) - Left Hand Drive Cars Only 2016 and Later Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Sport Diff Models Only & Without Brace Bars) - Right Hand Drive Cars Only 2016 and Later Audi S5 3.0 V6 Turbo Coupe/Cabrio B9 (Non Sport Diff Models Only) 2017 and Later Audi S5 3.0 V6 Turbo Coupe Only B9 (Sport Diff Models Only & Without Brace Bars) 2017 and Later Audi S5 3.0 V6 Turbo Sportback B9 (Non Sport Diff Models Only) 2017 and Later Audi S5 3.0 V6 Turbo Sportback B9 (Sport Diff Models Only & without Brace Bars) 2017 and Later notes: Cat Replacement Pipe SSXAU674Cat Bypass, fits with OE and Milltek Sport Cat back Systems Hi-Flow Sports Cat and Downpipe SSXAU673200 Cell HJS High Flow Sport Cat, fits with OE and Milltek Sport Cat back Systems Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

FITS: Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Non Sport Diff Models) - Left Hand Drive Cars Only 2016 and Later Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Non Sport Diff Models) - Right Hand Drive Cars Only 2016 and Later Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Sport Diff Models Only & Without Brace Bars) - Left Hand Drive Cars Only 2016 and Later Audi S4 3.0 Turbo V6 B9 - Saloon/Sedan & Avant (Sport Diff Models Only & Without Brace Bars) - Right Hand Drive Cars Only 2016 and Later Audi S5 3.0 V6 Turbo Coupe/Cabrio B9 (Non Sport Diff Models Only) 2017 and Later Audi S5 3.0 V6 Turbo Coupe Only B9 (Sport Diff Models Only & Without Brace Bars) 2017 and Later Audi S5 3.0 V6 Turbo Sportback B9 (Non Sport Diff Models Only) 2017 and Later Audi S5 3.0 V6 Turbo Sportback B9 (Sport Diff Models Only & without Brace Bars) 2017 and Later Audi SQ5 3.0TFSI V6 Turbo 2017 and Later Active Valve Control (AVC) is available to support both vehicles equipped with factory valves on the exhaust as well as a growing range of upgrades Milltek Sport offers to have performance exhaust systems with Valve Control. Also with optional App control on selected models, via iPhone or Android smartphone app’s, AVC brings total control of the exhaust to the drivers finger tips, via full CAN BUS integration with built in safety controls, Milltek’s AVC enables the driver to choose when the valves open and close to tune the sound and volume of the exhaust.       All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

Read more less

FITS: Audi A6 3.0 Bi-TDI C7 2011 to 2018 Audi A7 C7 3.0 Bi-TDI 2011 to 2018 Audi S4 3.0 Bi-TDI B9 Saloon/Avant (Diesel) 2019 and Later Audi S5 3.0 Bi-TDI B9 Coupe (Diesel) 2019 and Later Audi S6 3.0 TDI C8 Saloon / Avant (Diesel) 2019 and Later Audi S7 Sportback 3.0 TDI C8 (Diesel) 2019 and Later Audi SQ5 3.0 V6 Bi-TDI (Diesel) 2014 to 2016 Audi SQ7 4.0 V8 TDI 2016 to 2020   Active Sound (ASU) from Milltek Sport is an innovative solution to enable a user controllable exhaust sound to be made on vehicles that traditionally lack the sound and tone that owners desire; suitable for a wide range of vehicles, the growing range includes Hybrid’s, EV and diesels. Including 8 selectable sound files, volume, pitch and tone adjustment with user configurable profiles all controlled via Milltek’s own iPhone or Android app All our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

Read more less

 FITS: Audi S5 3.0 V6 Turbo Coupe Only B9 (Sport Diff Models Only & Without Brace Bars) 2017 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

FITS: Audi S5 3.0 V6 Turbo Sportback B9 (Non Sport Diff Models Only) 2017 and Later (Non OPF/GPF Models)  Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

 FITS: Audi S5 3.0 V6 Turbo Coupe/Cabrio B9 (Non Sport Diff Models Only) 2017 and Later Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less