Performance - Audi S5 B9 (F5) 2016-Present

PFC13-14 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 13-14mm --- PFC15-16 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 15-16mm --- PFC17-18 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 17-18mm --- PFC19-20 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 19-20mm --- PFC21-22 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 21-22mm --- PFC23-24 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 23-24mm --- PFC25-27 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 25-27mm --- PFC28-30 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 28-30mm --- PFC31-33 Made in precision CNC-machined 6082-T6 grade aluminium and anodised Black, with sizes to suit anti-roll bar diameters ranging from 13mm to 33 mm, these easy-to-fit, two-bolt clamps bolt to the side of each anti-roll bar bush to add lateral support and prevent any sidewards movement of the bar itself that might cause inconsistent handling. Size 31-33mm

Read more less

Racingline Wheel Stud & Nut Kit - M14x1.50Remove and install your wheels at the track all the time? Then you’ll know how frustrating the factory wheel bolts can be. Lining up the bolt holes, bashing the wheel against your beautiful brakes calipers, then cross-threading the bolts at the same time. All while balancing the weight of the wheel. Our Stud & Nut kit gives a stronger fixing method than using the original wheel bolts. Plus they’re a much quicker method to swap wheels for motorsport / track use as well. Converting your car to our Stud & Nut Kit is a simple, reversible upgrade that will speed up your wheel changes. Our Stud & Nut Kit also allow for the safe use of different spacer size setups without the risk of running out of bolt threads. Beautiful midnight-black gloss anodised finish on the nuts will smarten up your car’s looks as well as its practicality. Both conical and ball seat lug nuts are available to suit either factory or aftermarket wheels. Which Stud Lengths do I need?- If your vehicle is No wheel spacers, or wheel spacers upto 10mm in width, You need the 70mm Studs- If your vehicle has 11-20mm Wheel Spacers installed, You need the 80mm Studs.Stronger FixingM14 x 1.5 High Tensile Steel Motorsport Studs and larger anodised Wheel Nuts exceed the strength of the factory bolts for ultimate strength and safety. Quick Wheel ChangesStud and Nut kits are suited to any car that sees track use with regular wheel swaps. The studs really help to speed things up when you are trackside. Easy InstallationThese studs screw in place of your original wheel bolts with allen drive inserts to make installation a breeze. Plus easily removed in future. Precision engineered; for perfect performance!M14 x 1.5 heat treated high carbon steel stud with chrome plated finishLightweight M14 x 1.5 7000-series aluminium open-ended nuts with gloss anodised nutsInternal 6mm allen stud drive for accurate fixationsKnurled outer collar for much easier finger grip8mm of unthreaded stud shank for brake disc clearanceOversize 19mm nuts – greater surface area for contact & ease of use IMPORTANT NOTES: - Max Vehicle Weight 2500KG- This is not a 'Locking' or Security solution

Read more less

If you’re looking to improve the handling of your Audi B9, this is the best place to start! These cars have a lot more body roll than desired, and the stock sway bars don't quite do enough for most owners to be satisfied. Engineered, designed, and tested in-house at ECS Tuning, you know these sway bars are built to last with the highest quality. Larger diameter sway bars have a higher torsional spring rate which helps resist excessive body roll. By eliminating the excessive body roll and changing the stiffness of the sway bars front to rear, we can improve handling characteristics by reducing understeer and keep the tire in full contact with the ground.  By upgrading to the ECS Tuning Adjustable Front Sway Bar, you will experience less body roll, and a massive improvement to the handling characteristics of your vehicle, with virtually no sacrifice in ride quality.  In our testing with both bars installed, we found up to a 1.5° reduction in body roll!  Testing shows a significant and consistent increase in slalom speed of approximately 2 mph. On average there was a gain of ~0.5 seconds through the ~4.5 second total slalom run time. The slalom testing consisted of 5 gates spread 50’ apart. The increased stiffness gives the car a much more stable feel and allows the driver to stay consistent and in control: The sway bars are also adjustable, and allow for a “softer” setting, or a “stiffer” setting, depending on your driving preferences. Adjustable Front Sway Bar:  Design: 1.25” (31.75mm) OD, 0.120” (3.05mm) wall DOM (hollow) tubing Black powder coated for corrosion resistance 80A Durometer custom polyurethane greasable bushings - reduces flex at mount as compared to OEM rubber Grooved bushing inside diameter for improved grease retention Black anodized 6061-T6 billet brackets with check valve grease port Fully reversible back to factory components Performance: 58% stiffness increase on “soft” setting 68% stiffness increase on “stiff” setting Reduced body roll without excessive change in dynamic F/R balance Increased cornering speed and response time Works in unison with ECS 22mm rear sway bar Testing has shown up to a 1.5° reduction in body roll when both bars are installed Recommended use with ECS adjustable front sway bar end links   Adjustable Rear Sway Bar:  Design: 22.2mm OD solid steel bar Black powder coated for corrosion resistance 80A Durometer polyurethane greasable bushings - reduces flex at mount as compared to OEM rubber Grooved bushing inside diameter for improved grease retention Black anodized 6061-T6 billet brackets with check valve grease port Zinc coated class 12.9 hardware included for mounting brackets Fully reversible back to factory components Performance: 190% stiffness increase on “soft” setting 210% stiffness increase on “stiff” setting  Reduced body roll without excessive change in dynamic F/R balance Increased cornering speed and response time Testing has shown up to a 1.5° reduction in body roll when both bars are installed   *All testing shown was completed with both front and rear sway bars installed.  This Part Fits the Following Vehicles Make Model Submodel Engine Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 A5 Quattro 2.0T Audi B9 A5 Quattro 2.0T Sportback Audi B9 RS5 Quattro 2.9T Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

Adjustable sway bar end links allow you to lower your car without worrying about clearance issues between your sway bar and axles. As a vehicle is lowered, the sway bar and axle geometry is changed and can result in the sway bar contacting the axles and/or other components during suspension travel. The ECS Tuning Front Adjustable Sway Bar End Link Set allows for just under 2" of adjustability over the OEM component, allowing you to fine tune the suspension to your liking.  The main body is constructed from 6061-T6 billet aluminum and anodized red for corrosion protection. They feature machined hex wrenches at either side for easy on the car adjustments. Zinc black chromate lock nuts and wave washers secure the center body length to maintain adjustment height. Gray zinc coated heavy duty ball joint ends complete the connection from the sway bar to the chassis. The ball joint end includes weather resistant rubber boots with stainless steel wire retainers with the opposing side containing a red polyurethane bushing for added deflection resistance and extended durability against salt, rain and ozone impact.  Our ECS Sway Bar End Links were designed, engineered, tested and quality inspected by our Research and Development team in our Wadsworth, Ohio facility. We ensured the highest level of precision and quality is delivered throughout rigorous long term product testing and leading edge product development methods. These are a must have for lowered suspensions or make for a high quality, heavy duty OE-replacement upgrade for stock suspensions. No matter if you're stock or lowered these can adjust to fit your needs.  They will not only stay looking great but give an improved feel over stock bushings. Instead of buying parts over and over, our kit allows you to use it on a stock vehicle now, and a modified car later.   **Please note, once desired length is set please add a few drops of blue Loctite to the threads of the jam nut to maintain a secured position. See ES3647654 for purchase. This Part Fits the Following Vehicles Make Model Submodel Engine Audi A7 C7 3.0 TDI Audi A7 C7 3.0T Audi B8 A4 FWD 2.0T Audi B8 A4 Quattro 2.0T Audi B8 A4 Quattro V6 3.2L Audi B8 A5 Quattro 2.0T Audi B8 A5 Quattro V6 3.2L Audi B8 RS5 All 4.2L Audi B8 S4 Quattro 3.0T Audi B8 S5 Quattro 3.0T Cabriolet Audi B8 S5 Quattro 3.0T Coupe Audi B8 S5 Quattro V8 4.2L Audi B9 A4 FWD 2.0T Audi B9 A4 Quattro 2.0T Audi B9 RS5 Quattro 2.9T Audi B9 S4 Quattro 3.0T Audi B9 S5 Quattro 3.0T Audi B9 S5 Quattro 3.0T Sportback Audi B9 S5 Quattro 3.0T Cabriolet Audi C7 A6 FWD 2.0T Audi C7 A6 FWD V6 3.0T Audi C7 A6 Quattro 2.0T Audi C7 A6 Quattro 3.0 TDI Audi C7 A6 Quattro V6 3.0T Audi C7 S6 Quattro 4.0T Audi C7 S7 Quattro 4.0T Audi Q5 Quattro 2.0T Audi Q5 Quattro 3.0 TDI Audi Q5 Quattro 3.0T Audi Q5 Quattro 3.2L Audi RS7 Quattro 4.0T *The above product applications have been written by ECS Tuning. All warranties, product application, fitment, and performance are the responsibility of ECS Tuning. For additional information see the terms of use.

Read more less

ADJUSTABLEDROP LINKS. RACE-PROVEN FOR YOUR ROAD CAR. The RacingLine Adjustable Droplinks are an essential upgrade to any lowered or performance car. WHAT THEY DO. If you’ve lowered your car, our Adjustable Drop Links are an essential upgrade to zero the pre-load on your anti-roll bar geometry, plus add stiffness and precision by replacing the stock rubber joints with ball joints.  The drop link attaches the front anti roll bar ends to the front damper.  The OEM links were made the length they are for a reason - to compliment the standard ride height.  But when you lower ride height, the car will now be pulling your anti roll bar ends up, pushing it out of its operating window, and forcing the link to sit at a sharper angle. Solid, motorsport-spec ball joint ends mean much more direct response when turning in to corners. These links were developed for our race cars to allow the anti roll bar to work the way it should. Adjusting the height of droplinks to the equivalent of the lowering amount is a must. Available in two lengths: 250mm for almost all applications. Or, 200mm length for cars running our TrackSport suspension or any other coilover kit with adjustable sway-bar perch. ADJUSTABLE 30mm of adjustable length to zero preload on the Anti Roll Bar. Choice of two lengths to suit different ride heights. ​ ​ PRECISE By replacing the soft rubber bushing in the factory links with motorsport-spec ball joints, cornering and steering responses are sharpened. RACE-PROVEN Developed for our race cars, yet no compromise for road cars. PRECISION ENGINEERED FOR PERFECT PERFORMANCE. 30mm of adjustable length to zero the preload on the Anti Roll Bar Lightweight CNC-machined 6061-T2 Aluminum bodies with beautiful gloss black anodised coating Left / Right threaded ends make for easy length adjustment Motorsport-specification ball joint ends - high strength teflon-lined steel Rubber dust boots fitted to protect the joints  CONFIRMED APPLICATIONS VWR420000250mm length -All applications VWR420001200mm length - Coilover set-ups with adjustable roll-bar drop link mounts > VW Golf 8 2020+ > VW Golf 7 & 7.5 2013-2020 > VW Passat B8 2015+ > VW Arteon 2017+ > VW T-Roc 2017+ > VW Tiguan II 2016+ > VW Golf 5 2005-2008 > VW Golf 6 2008-2014 > VW Scirocco 2008-2017 > VW Jetta / GLI 5 2005-2011 > VW Jetta / GLI 6 2011-2018 > VW Jetta / GLI 7 2018+ > Audi S3 8Y 2020+ > Audi A3 8Y 2020+ > Audi S3 8V 2013-2020 > Audi A3 8V 2013-2020 > Audi RS3 2.5 TFSI 8Y 2021+ > Audi RS3 2.5 TFSI 8V.2 evo 2017-2020 > Audi RS3 2.5 TFSI 8V 2015-2017 > Audi TT 3 8S 2014+ > Audi TTRS 2.5 TFSI 8S 2017+ > Audi SQ2 2018+ > Audi Q3 2019+ > Audi Q2 2017+ > Audi RSQ3 F3 2019+ > Audi S3 8P 2006-2012 > Audi A3 8P 2003-2012 > Audi TT II 8J 2006-2014 > Audi TTRS II 8J 2009-2014 > Audi SQ5 2017+ > Audi A4 / S4 / RS4 B9 2015+ > Audi A4 / S4 / RS4 B8 2007–2015 > Audi A5 / S5 / RS5 F5 B9 2015+ > Audi A6 / S6 / RS6 C7 4G 2011-2018 > Audi A7 / S7 / RS7 C7 4G 2011-2018 > Audi Q5 II FY 2017+ > Cupra Leon IV FW 2020+ > SEAT Leon IV FW 2020+ > SEAT Leon III 5F 2015-2020 > SEAT Leon II 1P 2005-2012 > Cupra Formentor VZ5 2.5 TFSI 2020+ > Cupra Formentor 2020+ > Cupra Ateca 2018+ > SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+ > Skoda Octavia IV NX 2020+ > Skoda Octavia III 5E 2014-2020 > Skoda Octavia II 1Z 2004-2013 > Skoda Superb III 3V 2015+

Read more less

PF3-1660 is a polyurethane jack pad to fit into the plastic lifting points found on a large number of performance Audi vehicles and is designed to help lift stability and location, whilst protecting the underside of your vehicle. OEM Part Number: 420803855A / 4S0803855B OEM Part Number: 4KE802847A / 4KE802847B OEM Part Number: 8K0802247B Size 80mm Diameter Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price FITS: AUDI A6 / S6 / RS6 C6 (2004/2011) AUDI A6 (2011-2018) AUDI A6 QUATTRO (2011-2018) AUDI S6 (2012-2018) AUDI A7 (2010-2017) Audi R8 (2006 - ON), Audi TT MK2 8J (2007-2014), Audi TTRS MK2 8J (2009-2014) Audi A4 (2008-2016),  Audi A4 Quattro (2008 - 2016),  Audi RS4 (2012-2016),  Audi S4 (2009-2016),  Audi A5 (2007-2016),  Audi A5 Quattro (2007-2016),  Audi RS5 (2010 - 2016),  Audi S5 (2007 - 2016),  Audi A6 (2011 - ),  Audi A6 Quattro (2011 - ),  Audi RS6 (2012 - ),  Audi S6 (2012 - ),  Audi A7 (2010 - 2017),  Audi A7 Quattro (2010 - 2017),  Audi RS7 (2013 - 2017),  Audi S7 (2012 - 2017) ,  Audi R8 (2006 - ON),  Audi Q5 (2008-2017),  Audi Q5 Quattro (2008-2017),  Audi SQ5 (2013 - 2017),  Audi TT MK2 8J (2007-2014)  

Read more less